Download HMC783LP6CE 数据资料DataSheet下载

HMC783LP6CE
v03.0411
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 11.5 - 12.5 GHz
Features
• RF Bandwidth: 11.5 GHz to 12.5 GHz
• 24-bit Step Size, Resolution 3 Hz typ
• Fractional or Integer Modes
• 225 MHz, 14-bit reference path input
• Ultra Low Phase Noise
12 GHz; 50 MHz Ref.
-95 / -99 dBc/Hz @ 10 kHz (Frac / Int)
-134 dBc/Hz @ 1 MHz (Open Loop)
• Direct FSK Modulation Mode
• Figure of Merit (FOM)
-221 / -226 dBc/Hz (Frac / Int)
• Cycle Slip Prevention
• Read / Write Serial Port, Chip ID
• 40 Lead 6 x 6 mm SMT Package: 36 mm²
Typical Applications
7
• VSAT Radio
• Military End-Use
• Point-to-Point / Multi-Point Radio
• Phased Array Applications
PLLS w/ Integrated VCO - SMT
• Test Equipment & Industrial Control
Functional Diagram
[1] Please refer to the pin description table for details
7-1
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
www.BDTIC.com/Hittite/
HMC783LP6CE
v03.0411
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 11.5 - 12.5 GHz
General Description
The HMC783LP6CE is a fully functioned Fractional-N Phase-Locked-Loop (PLL) with an Integrated Voltage
Controlled Oscillator (VCO). The input reference frequency range is 100 kHz to 220 MHz while the advanced deltasigma modulator design in the fractional PLL allows both ultra-fine step sizes and very low spurious products. The
highly integrated structure provides excellent phase noise performance over temperature, shock and process. The
HMC783LP6CE is packaged in a leadless QFN 6 x 6 mm surface mount package. The output power is 11 dBm typical,
making the HMC783LP6CE ideal for driving the LO port of many of Hittite’s Hi Linearity and I/Q mixer products.
For theory of operation and register map refer to the “PLLs w/ Integrated VCO - Microwave VCOs” Operating Guide.
To view the Operating Guide, please visit www.hittite.com and choose HMC783LP6CE from the “Search by Part
Number” pull down menu.
Parameter
Condition
Min.
Typ.
Max.
Units
11.5
12
12.5
GHz
dBm
RF Output Characteristics
VCO Output Frequency Range
VCO Output Power
5
15
VCO Tuning Voltage
2
13
VCO Tuning Sensitivity
V TUNE = +5V
Frequency Pulling (into a 2:1 VSWR)
Frequency Pushing
V TUNE = +5V
V
160
MHz/V
8
MHz pp
6
MHz/V
Frequency Drift Rate
1.2
MHz/ °C
Sub Harmonic (1/2)
30
dBc
Harmonic (2 )
24
dBc
Harmonic (3rd)
40
dBc
V TUNE = +5V
Fvco = 12 GHz
-110
dBc/Hz
Fref = 50 MHz Fvco = 12 GHz
Loop BW = 100 kHz
-95 / -99
dBc/Hz
-221 / -226
dBc/Hz
-65
dBc
104
μs
nd
VCO SSB Phase Noise @ 100 kHz Offset (Open Loop)
Synthesizer In-Band
SSB Phase Noise @ 10 kHz Offset (Frac/Int)
Synthesizer Normalized In-Band
SSB Phase Noise Floor (Frac/Int)
Synthesizer Fractional Spurs [1]
Synthesizer Frequency Settling Time (100 MHz Step)
16-Bit Divider Range (Int)
16-Bit Divider Range (Frac)
From 12.1 GHz to 12 GHz
Loop BW = 100 kHz
16
N Divider Ratio 2 +31
32
65567
N Divider Ratio 216 -1
36
65535
REF Input Characteristics
Max Ref Input Frequency (3.3V)
200
Min Ref Input Frequency
100
Ref Input Sensitivity
AC Coupled
Max Ref Input
DC Coupled
500
0
Ref Input Capacitance
14-Bit Ref Divider Range
225
16383
MHz
200
kHz
700
mVpp
VDDIO
V
5
pF
7
PLLS w/ Integrated VCO - SMT
Electrical Specifications, TA = +25° C; VCCVCO, VDDCP, VCCCP = +5V; AVCC, VCCPS
VDDPFD, AVDD, RVDD, DVDD, DVDDM, DVDDQ, VDDIO = +3.3V; AGND = DGND = 0V
1
[1] Actual spur level is dependent on loop parameters and will increase at division ratios closest to integer boundaries. Number listed is average
value.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
www.BDTIC.com/Hittite/
7-2
HMC783LP6CE
v03.0411
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 11.5 - 12.5 GHz
Electrical Specifications (Continued)
Parameter
Condition
Min.
Typ.
Max.
Units
Phase Detector
Max Phase Detector Frequency (Frac)
70
105
MHz
Max Phase Detector Frequency (Int)
140
160
MHz
Min Phase Detector Frequency
100
kHz
Charge Pump
Max Output Current
2
Min Output Current
Charge Pump Noise
Input referred 50 MHz Ref.
mA
500
µA
-145
dBc/Hz
Logic Inputs
PLLS w/ Integrated VCO - SMT
7
7-3
VIH Input High Voltage
VDDIO-0.4
VDDIO
V
VIL Input Low Voltage
0
0.4
V
VOH Output High Voltage
VDDIO-0.4
VDDIO
V
VOL Output Low Voltage
0
0.4
V
Logic Outputs
Serial Port Max Clock
50
MHz
Power Supply Voltages
Analog 3.3V Supplies: AVCC, VDDPFD, AVDD, RVDD,
VCCPS
AVDD must equal DVDD
3
3.3
3.45
V
3
3.3
3.45
V
Logic I/O
1.8
3.3
5.5
V
VCCCP must equal VDDCP
4.75
5
5.25
V
Total Current Consumption (5V)
145
190
mA
Total Current Consumption (3.3V)
90
110
mA
1
10
µA
Digital Internal Supplies: DVDD, DVDDQ, DVDDM
Digital I/O Supplies: VDDIO
Analog 5V Supplies: VCCVCO, VDDCP, VCCCP
Power Supply Currents
CSP Disabled
Power Down Current [1]
Bias Reference Voltage
CSP Enabled
Measured with 10 GΩ meter
450
1.880
1.920
µA
1.960
V
[1] Refers only to the Synthesizer portion of the HMC783LP6CE
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
www.BDTIC.com/Hittite/
HMC783LP6CE
v03.0411
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 11.5 - 12.5 GHz
SSB Phase Noise vs. Frequency,
Integer Mode
SSB Phase Noise vs. Temperature
@ 12 GHz, Integer Mode
-60
-60
-70
11.5 GHz
12.0 GHz
12.5 GHz
-80
PHASE NOISE (dBc/Hz)
-90
-100
-110
-120
-130
Temp = 25C
Fref = 50 MHz
Loop BW = 100 kHz
-140
-90
-100
-110
-120
-130
Fref = 50 MHz
Loop BW = 100 kHz
-140
-150
10
+25 C
+85 C
-40 C
-80
-150
2
10
3
10
4
10
5
10
6
10
7
10
2
10
3
-60
-60
-70
-70
-80
-90
-100
-110
-120
Temp = 25C
Fref = 50 MHz
Loop BW = 100 kHz
-150
2
10
10
3
4
10
5
10
6
10
7
-120
Fref = 10MHz
Loop BW= 10kHz
-130
Fref = 50MHz
Loop BW=100kHz
10
3
10
4
10
5
10
6
10
7
OFFSET FREQUENCY (Hz)
Typical Reference Sensitivity
vs. Frequency, 3.3V [1]
20
12.2
10
SENSITIVITY (dBm)
FREQUENCY (GHz)
10
-110
12.3
12.1
CSP OFF
11.9
CSP ON
11.7
R = Max, +25C
R = Max, +85C
0
-10
R = 3, +25C
R = 3, +85C
-20
7
-30
-40
11.6
-20
6
-90
-150
2
10
7
Example of Cycle Slip Prevention Hop
from 12.2 to 11.7 GHz
11.8
10
-100
OFFSET FREQUENCY (Hz)
12
5
-80
-140
10
10
SSB Phase Noise vs. Reference Freq. &
Loop BW @ 12 GHz, Integer Mode
PHASE NOISE (dBc/Hz)
PHASE NOISE (dBc/Hz)
SSB Phase Noise Fractional
Spurs @ 12.002 GHz
-140
4
OFFSET FREQUENCY (Hz)
OFFSET FREQUENCY (Hz)
-130
10
PLLS w/ Integrated VCO - SMT
PHASE NOISE (dBc/Hz)
-70
-50
-10
0
10
20
30
40
50
TIME (μSEC)
60
70
80
0
50
100
150
200
250
300
FREQUENCY (MHz)
[1] R refers to the reference path division ratio
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
www.BDTIC.com/Hittite/
7-4
HMC783LP6CE
v03.0411
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 11.5 - 12.5 GHz
Frequency vs. Tuning Voltage, Vcc = +5V
13.4
13.4
13.1
13.1
OUTPUT FREQUENCY (GHz)
OUTPUT FREQUENCY (GHz)
Frequency vs. Tuning Voltage, T = 25°C
12.8
12.5
12.2
11.9
11.6
11.3
Vcc=4.75V
Vcc=5.00V
Vcc=5.25V
11
10.7
12.2
11.9
11.6
11.3
+25C
+85C
-40C
11
10.4
0
1
2
3
4
7
5
6
7
8
9
10
11
12
0
13
1
2
3
4
Sensitivity vs. Tuning Voltage, Vcc = +5V
6
7
8
9
10
11
12
13
10
11
12
13
Output Power
vs. Tuning Voltage, Vcc = +5V
700
14
13
500
OUTPUT POWER (dBm)
600
SENSITIVITY (MHz/V)
5
TUNING VOLTAGE (V)
TUNING VOLTAGE (V)
+25C
+85C
-40C
400
300
200
100
12
11
10
9
8
7
+25C
+85C
-40C
6
5
0
4
0
1
2
3
4
5
6
7
8
9
10
11
12
13
0
1
2
3
4
TUNING VOLTAGE (V)
6
7
8
9
Open Loop VCO SSB Phase Noise vs.
Tuning Voltage
0
-20
-20
-40
SSB PHASE NOISE (dBc/Hz)
0
+25C
+85C
-40C
-60
-80
-100
-120
-140
10KHz Offset
100KHz Offset
-40
-60
-80
-100
-120
-140
-160
10
5
TUNING VOLTAGE (V)
Open Loop VCO SSB Phase Noise @
Vtune = +5V
SSB PHASE NOISE (dBc/Hz)
PLLS w/ Integrated VCO - SMT
12.5
10.7
10.4
3
10
4
10
5
10
OFFSET FREQUENCY (GHz)
7-5
12.8
6
10
7
1
2
3
4
5
6
7
8
9
10
11
12
13
TUNING VOLTAGE (V)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
www.BDTIC.com/Hittite/
HMC783LP6CE
v03.0411
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 11.5 - 12.5 GHz
Pin Descriptions
Function
Description
1, 9 - 13, 22, 36
N/C
No Connection. These pins may be connected to RF/DC ground.
Performance will not be affected.
2 - 4, 7, 37, 39
GND [1]
These pins must be connected to RF/DC Ground
5
GND
These pins and package bottom
must be connected to RF/DC Ground
8
VCCVCO2 [2]
40
VCCVCO1
6
VTUNE
Control Voltage Input. Modulation port bandwidth
dependent on drive source impedance.
14
ACG
AC Ground. This pin must be connected to
an external capacitor to ground.
15
AVCC
Analog Power supply pin for the RF Section.
A decoupling capacitor to the ground plane should
be placed as close as possible to this pin. Nominally 3.3V
16
VDDCP
+5V Power Supply for charge pump digital section
+5V Power Supply for VCO
17
VCCCP
+5V Power Supply for the charge pump analog section
18
CP
Charge pump output
19
VDDPFD
Analog Power supply for the phase frequency detector, Nominally 3.3V
20
BIAS [3]
External bypass decoupling for precision bias circuits,
1.920V ±20 mV is generated internally
21
AVDD
Analog Power supply for analog ref paths, Nominally 3.3V
23
REFN
Reference input (Negative or AC coupled to GND)
24
REFP
Reference input (Positive)
25
RVDD
Ref path supply
26
DVDDQ
Digital supply for Substrate, Nominally 3.3V
27
CE
Chip Enable
28
SEN
Serial port latch enable input
29
SCK
Serial port clock input
30
SDI
Serial port data input
31
DVDD
Power supply pin for internal digital circuitry. Nominally 3.3V
32
VDDIO
Power Supply for digital I/O driver
33
LD_SDO
Lock Detect, Main Serial Data Output
or VCO Serial Port Data Out
34
VCCPS
Analog Power Supply for Prescaler, Nominally 3.3V
35
DVDDM
Digital Power Supply for M-Counter, Nominally 3.3V
38
RFOUT
RF output (AC coupled).
7
PLLS w/ Integrated VCO - SMT
Pin Number
[1] This pin is not connected internally, however, this pin must be connected to GND to maintain product family pin for pin compatibility.
[2] This pin is not connected internally, however, this pin must be connected to Vcc to maintain product family pin for pin compatibility.
[3] BIAS ref voltage (pin 20) cannot drive an external load, and must be measured with a 10 GOhm meter such as Agilent 34410A; a typical
10 Mohm DVM will read erroneously.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
www.BDTIC.com/Hittite/
7-6
HMC783LP6CE
v03.0411
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 11.5 - 12.5 GHz
Pin Schematic Equivalents
Pins
Equivalent Schematic
RFOUT
VCCVCO1
PLLS w/ Integrated VCO - SMT
7
7-7
VTUNE
GND
SEN, CE, SCK, SDI
LD_SDO
CP
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
www.BDTIC.com/Hittite/
HMC783LP6CE
v03.0411
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 11.5 - 12.5 GHz
Pin Schematic Equivalents (Continued)
Pins
Equivalent Schematic
Bias
REFN, REFP
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
www.BDTIC.com/Hittite/
PLLS w/ Integrated VCO - SMT
7
7-8
HMC783LP6CE
v03.0411
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 11.5 - 12.5 GHz
Evaluation Circuit
3VDIGITAL
3VANALOG
3VDIGITAL
C12
100NF
C10
10PF
C14
100NF
C13
10PF
C8
10PF
C9
100NF
CEN
2
R8
100K
A
B
C
D
1
JP1
3VDIGITAL
J3
5016
C38
1NF
JP3
2
C32
4.7UF
11
12
13
14
15
16
17
18
19
20
GND
U1
HMC783LP6CE
SDI
SCK
SEN
CE
DVDDQ
RVDD
REFP
REFN
NC
AVDD
E
F
G
H
C
100N
C35
100NF
1
C31
30
29
28
27
26
25
24
23
22
21
C21
1NF
SYNTH
5016
NC
GND
GND
GND
GND
VTUNE
GND
VCCVCO2
NC
NC
NC
NC
NC
ACG
AVCC
VDDCP
VCCCP
CP
VDDPFD
BIAS
1
2
3
4
5
6
7
8
9
10
VCCVCO1
GND
RFOUT
GND
NC
DVDDM
VCCPS
LD_SDO
VDDIO
DVDD
C1
1NF
1
SDO
40
39
38
37
36
35
34
33
32
31
2
C4
4.7UF
TP5
PLLS w/ Integrated VCO - SMT
50 Ohm Co-Planar Trace
JP2
7
RFout
5VVCO
LD
TP6
1
R1
100K
C15
100PF
R20
1K
100PF
R23
C65
R27
DEPOP
DEPOP
0
C61
3.9NF
R28
DEPOP
L1
I
DEPOP
R21
R12
30
DEPOP
C62
R3
1K
+15V
TP4
5016
TP3
5016
GND
C57
22UF
C58
4.7UF
C39
1NF
7
6
THS4031IDGN
4
620
C64
C33
1.5NF
J
C37
3.9NF
DEPOP
K
R25
2
U5
FB3
1000
DEPOP
DEPOP
FB4
1000
C63
R13
182
R4
DEPOP
3
R26
R22
0
L
DEPOP
R15
10K
C60
1NF
R14
JP6
1
2
10K
7-9
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
www.BDTIC.com/Hittite/
M
HMC783LP6CE
v03.0411
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 11.5 - 12.5 GHz
Evaluation Circuit (Continued from page 9)
VDIGITAL
Header to USB Board
J1
R1
100K
2
3
4
5
6
7
8
9
10
11
12
NC
NC
GND
3VDIGITAL
REFin
C29
50 Ohm Trace
1
R41
1K
JP5
1
R11
4.02K
5VVCO
1000
C36
100NF
J2
U9
LP3878MR-ADJ
SD
2
R40
4.02K
C67
1.2NF
6
5
ADJ
VIN
BPASS
VOUT
GND
8
4
R2
120
C40
56
R7
120
100NF
TCXO
3
FOUT
Y2
GND
VDD
VC
R9
4
1
C6
10PF
C28
100NF
3
C74
4.7UF
C73
10NF
C68
4.7UF
3VTCXO
R17
1K
10
R16
4.02K
DEPOP
5VCP
R10
0
U8
LP3878MR-ADJ
SD
R24
2
C30
DEPOP
C46
100NF
C44
1.2NF
6
5
ADJ
VIN
BPASS
VOUT
GND
8
4
C43
100NF
1
3
C48
4.7UF
C47
10NF
C45
4.7UF
3VANALOG
I
C16
10PF
C18
100NF
U2
LP5900-3_3V
3VANALOG
3VANALOG
C22
10PF
C23
100NF
5VCP
C24
10PF
C25
100NF
C19
10PF
1
GND EN
6
R5
10K
4
3
U4
LP5900-3_3V
3VDIGITAL
C51
10PF
VIN
VOUT
C20
100NF
1
VOUT
C52
100NF
VIN
C17
4.7UF
6
4
GND EN
C11
100NF
3
R18
10K
C50
100NF
C49
4.7UF
3VANALOG
C26
10PF
C27
100NF
U6
LP5900-3_3V
3VTCXO
1
C55
10PF
C56
100NF
VOUT
VIN
GND EN
6
4
3
C54
100NF
JP4
R19
10K
1
M
7
C41
100NF
1
100NF
R6
L
FB1
5016
C3
100NF
C34
100NF
K
TP1
C59
4.7UF
C7
100NF
C2
10PF
J
1000
C42
100NF
NC
3VANALOG
E
F
G
H
FB2
5016
NC
TLW-106-05-T-D
C5
10PF
TP2
PLLS w/ Integrated VCO - SMT
SCK
SDI
SDO
SEN
CEN
A
B
C
D
5.5V
3VDIGITAL
1
C53
4.7UF
2
5VCP
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
www.BDTIC.com/Hittite/
7 - 10
HMC783LP6CE
v03.0411
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 11.5 - 12.5 GHz
ader to USB Board
J1
2
3
4
5
6
7
8
9
10
11
12
TP2
FB2
1000
5016
NC
C42
100NF
NC
NC
NC
GND
TLW-106-05-T-D
3VDIGITAL
TP1
C59
4.7UF
FB1
1000
5016
C7
100NF
1
C3
100NF
R11
4.02K
5VVCO
7
REFin
C29
Ohm Trace
1
R41
1K
JP5
3VANALOG
C2
0PF
C36
100NF
J2
U9
LP3878MR-ADJ
SD
2
R40
4.02K
C67
1.2NF
6
5
ADJ
VIN
BPASS
VOUT
GND
8
4
C41
100NF
1
3
C74
4.7UF
C73
10NF
C68
4.7UF
100NF
TCXO
3
PLLS w/ Integrated VCO - SMT
00NF
5.5V
3VDIGITAL
1
C5
0PF
C40
Evaluation Circuit (Continued from page 10)
FOUT
Y2
GND
VDD
4
VC
1
R9
C6
10PF
C28
100NF
3VTCXO
R17
1K
10
SD
R24
2
R16
4.02K
DEPOP
C30
DEPOP
5VCP
R10
0
U8
LP3878MR-ADJ
C46
100NF
C44
1.2NF
6
5
ADJ
VIN
BPASS
VOUT
GND
8
4
1
3
C43
100NF
C48
4.7UF
C11
100NF
C17
4.7UF
C50
100NF
C49
4.7UF
C54
100NF
JP4
C53
4.7UF
C47
10NF
C45
4.7UF
3VANALOG
C18
100NF
U2
LP5900-3_3V
3VANALOG
3VANALOG
C23
100NF
5VCP
C25
100NF
C19
10PF
1
C20
100NF
GND EN
6
R5
10K
4
3
U4
LP5900-3_3V
3VDIGITAL
C51
10PF
VIN
VOUT
1
C52
100NF
VOUT
VIN
6
4
GND EN
3
R18
10K
3VANALOG
C27
100NF
U6
LP5900-3_3V
3VTCXO
1
C55
10PF
C56
100NF
VOUT
VIN
GND EN
3
6
4
R19
10K
1
2
5VCP
7 - 11
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
www.BDTIC.com/Hittite/
HMC783LP6CE
v03.0411
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 11.5 - 12.5 GHz
Absolute Maximum Ratings
Nominal 3.3V Supplies to GND
-0.3V to +3.6V
Nominal Digital Supply Relative to
3.3V Analog Supply
-0.3V to +0.3V
Nominal 5V Supply to GND
-0.3 to +5.5V
Vtune
0 to +15V
Storage Temperature
-65 to +150°C
Max Peak Reflow Temperature
260 °C
ESD Sensitivity (HBM)
Class 1A
Reliability Information
Junction Temperature to Maintain
1 Million Hour MTTF
135 °C
Nominal Junction Temperature (T=85 °C)
120 °C
Thermal Resistance
(Junction to GND Paddle, 5V Supply)
48.3 °C/W
Operating Temperature
-40 to +85°C
7
PLLS w/ Integrated VCO - SMT
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2.DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15 mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST
BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR
SUGGESTED PCB LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
Package Marking [1]
HMC783LP6CE
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL3
H783
XXXX
[1] 4-Digit lot number XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
www.BDTIC.com/Hittite/
7 - 12
HMC783LP6CE
v03.0411
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 11.5 - 12.5 GHz
Evaluation PCB
PLLS w/ Integrated VCO - SMT
7
7 - 13
The circuit board used in the application should use RF circuit design techniques. Signal lines should have
50 Ohm impedance while the package ground leads and exposed paddle should be connected directly
to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the
top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
www.BDTIC.com/Hittite/
HMC783LP6CE
v03.0411
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 11.5 - 12.5 GHz
List of Materials for Evaluation PCB 127272 [1]
Description
J1
Dual Row Terminal Strip
J2, J3
PCB Mount SMA RF Connector
JP1 - JP6
Single Row Terminal Strip
C1, C21, C38 - C39, C60
1000 pF Capacitor, 0402 Pkg.
C2, C5, C6, C8, C10, C13, C16,
C19, C22, C24, C26, C51, C55
10 pF Capacitor, 0402 Pkg.
C3, C7, C9, C11, C12, C14, C18, C20, C23,
C25, C27 - C29, C34 - C36, C40 - C43,
C46, C50, C52, C54, C56
0.1 µF Capacitor, 0402 Pkg.
C4, C17, C32, C45, C48,
C49, C53, C68, C74
4.7 µF Capacitor, 0805 Pkg.
C15, C31
100 pF Capacitor, 0402 Pkg.
C44, C67
1200 pF Capacitor, 0402 Pkg.
C33
1500 pF Capacitor, 0402 Pkg.
C37
0.039 µF Capacitor, 0603 Pkg.
C47, C73
10,000 pF Capacitor, 0402 Pkg.
C57
22 µF Tantalum Capacitor, Case D
C58, C59
4.7 µF Tantalum Capacitor, Case B
C61
3900 pF Capacitor, 0402 Pkg.
FB1 - FB4
1000 Ohm 200 mA Ferrite Chip, 0805 Pkg.
R1, R8
100k Ohm Resistor, 0402 Pkg.
R2, R7
120 Ohm Resistor, 0402 Pkg.
R3, R17, R20, R41
1k Ohm Resistor, 0402 Pkg.
R4
620 Ohm Resistor, 0402 Pkg.
R5, R14, R15, R18, R19
10k Ohm Resistor, 0402 Pkg.
R6
56 Ohm Resistor, 0402 Pkg.
R9
10 Ohm Resistor, 0402 Pkg.
R10, R22, R23
Zero Ohm Resistor, 0402 Pkg.
R11, R16, R40
4.02k Ohm Resistor, 0402 Pkg.
R13
182 Ohm Resistor, 0402 Pkg.
R21
30 Ohm Resistor, 0402 Pkg.
TP1 - TP6
Test Point PC Compact SMT
U1
HMC783LP6CE Fractional-N PLL, with
Integrated VCO
U2, U4, U6
Low Noise 3.3V, 100 mA Linear Regulator
U5
Low Noise Op-Amp, THS4031IDGN
U8, U9
5V, 800mA Voltage Regulator
Y2
3.3V, 50 MHz VCXO Crystal Oscillator
PCB [2]
125536 Evaluation Board
7
PLLS w/ Integrated VCO - SMT
Item
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25FR and FR4
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
www.BDTIC.com/Hittite/
7 - 14