Download Chapter8 (Internet Protocol)

Document related concepts

Zero-configuration networking wikipedia , lookup

Airborne Networking wikipedia , lookup

SIP extensions for the IP Multimedia Subsystem wikipedia , lookup

Point-to-Point Protocol over Ethernet wikipedia , lookup

Serial digital interface wikipedia , lookup

RapidIO wikipedia , lookup

Asynchronous Transfer Mode wikipedia , lookup

Multiprotocol Label Switching wikipedia , lookup

I²C wikipedia , lookup

Cracking of wireless networks wikipedia , lookup

Recursive InterNetwork Architecture (RINA) wikipedia , lookup

Wake-on-LAN wikipedia , lookup

Deep packet inspection wikipedia , lookup

Internet protocol suite wikipedia , lookup

IEEE 1355 wikipedia , lookup

UniPro protocol stack wikipedia , lookup

Real-Time Messaging Protocol wikipedia , lookup

Transcript
Chapter 8
Internet Protocol
(IP)
Kyung Hee
University
1
Position of IP in TCP/IP protocol suite
Kyung Hee
University
2
Introduction
IP is the transmission mechanism used by the
TCP/IP protocol
It is unreliable and connectionless datagram
protocol
Providing Best-effort delivery service (best-effort :
no error checking and tracking)
Kyung Hee
University
3
8.1 Datagram
Packets in the IP layer : called datagrams
IP datagram format
Variable-length packet consisting of header and data

Header
–
20 ~ 60 bytes
–
Containing information that is essential for routing and delivery
IP header
Version (VER) : Version 4 or 6 (IPng)
Header length (HLEN) : represented by in 4 byte words

Kyung Hee
University
Ex) if HLEN = 5, the real header length is 20 bytes
4
Datagram (cont’d)
Kyung Hee
University
5
Datagram (cont’d)
Service Type

Defining how the datagram should be handled by the
routers

Precedence : 3 bits

–
Defining the priority of the datagram in issues such as
congestion
–
Ex) a datagram for network management vs. optional
information to a group of people
–
At present, not used in version 4
service type : 4 bits (TOS bits)
–

Kyung Hee
University
With only one bit set at a time
Remaining bit : not used
6
Datagram (cont’d)
 Service type or Differentiated Services
Kyung Hee
University
7
Datagram (cont’d)
Types of service
Kyung Hee
University
TOS bits
Description
0000
Normal
0001
Minimize cost
0010
Maximize reliability
0100
Maximize throughput
1000
Minimize delay
8
Datagram (cont’d)
Default types for some applications in use of TOS
Protocol
TOS bits
Description
ICMP
0000
Normal
BOOTP
0000
Normal
NNTP
0001
Minimize cost
IGP
0010
Maximize reliability
SNMP
0010
Maximize reliability
TELNET
1000
Minimize delay
FTP (data)
0100
Maximize throughput
FTP (control)
1000
Minimize delay
TFTP
1000
Minimize delay
SMTP (command)
1000
Minimize delay
SMTP (data)
0100
Maximize throughput
DNS (UDP query)
1000
Minimize delay
DNS (TCP query)
0000
Normal
0100
Maximize throughput
DNS (zone)
Kyung Hee
University
9
Datagram (cont’d)
 Differentiated Services
The first 6 bits : codepoint subfield
Values for codepoints
Category
Kyung Hee
University
Codepoint
Assigning Authority
1
XXXXX0
Internet
2
XXXX11
Local
3
XXXX01
Temporary or
experiment
10
Datagram (cont’d)
Total Length : head + data

Defining the total length of the datagram including the
header

Length of data = total length – header length

Limited to 65,535 (216 – 1) bytes

Encapsulation of a small datagram in an Ethernet Frame
Ethernet Frame size : 46 ~ 1500 bytes
Kyung Hee
University
11
Datagram (cont’d)
Flags : used in fragmentation
Fragmentation offset : used in fragmentation
Time to live
Kyung Hee
University

Used to control the maximum number of hops (routers)
visited by the datagram

If the value is Zero, the routers discarded

If the source wants to confine the packet to the local
network, it can store 1 in this field
12
Datagram (cont’d)
Protocol

Defining the higher level protocol that uses the services of
the IP layer
–
–
TCP, UDP, ICMP, and IGMP
Multiplexing data from different higher level protocols
Value
1
2
6
8
17
89
Kyung Hee
University
Protocol
ICMP
IGMP
TCP
EGP
UDP
OSPF
13
Datagram (cont’d)
 Example 1
- An arriving IP packet :  01000010
The receiver discards the packet, Why ?
- 2 x 4 bytes = 8bytes : Minimum number of bytes
in the header must be 20
Kyung Hee
University
14
Datagram (cont’d)
 Example 2
The value of HLEN is 1000 in binary
How many bytes of options are being carried by this
packet ?

8 x 4 bytes = 32 bytes : 20 bytes + 12 bytes (option)
Kyung Hee
University
15
Datagram (cont’d)
 Example 3
- In an IP packet, the value of HLEN is 5 16 and the
value of the total length field is 002816. How many
bytes of data are being carried by this packet?
Answer
The HLEN value is 5, which means the total number
of bytes in the header is 5  4 or 20 bytes (no
options). The total length is 40 bytes, which
means the packet is carrying 20 bytes of data (40 20).
Kyung Hee
University
16
Datagram (cont’d)
 Example 4
An IP packet has arrived with the first few
hexadecimal digits as shown below:
 45000028000100000102...................
How many hops can this packet travel before
being dropped? The data belong to what upper
layer protocol?
Kyung Hee
University
17
Datagram (cont’d)
 Answer
To find the time-to-live field, we should skip 8
bytes (16 hexadecimal digits). The time-to-live field
is the ninth byte, which is 01. This means the
packet can travel only one hop. The protocol field
is the next byte (02), which means that the upper
layer protocol is IGMP.
Kyung Hee
University
18
Datagram (cont’d)
Checksum : header checksum- 16 bits
Source IP address : 32 bit-field
Destination IP address : 32 bit-field
Kyung Hee
University
19
8.2 Fragmentation
The format and size of the received frame depend on
the protocol used by the physical network
Ex) A router connecting Ethernet to token ring
Kyung Hee
University
20
Fragmentation (cont’d)
MTU (Maximum Transfer Unit)
When a datagram is encapsulated in a frame, the
total size of the datagram must be less than this
maximum size
Kyung Hee
University
21
Fragmentation (cont’d)
MTUs for different networks
Protocol
MTU
Hyperchannel
65,535
Token ring (16Mbps)
17,914
Token ring (4Mbps)
4,464
FDDI
4,352
Ethernet
1,500
X.25
576
PPP
296
Hyperchannel : Network Systems Corporation, 1988 (RFC 1044)
Kyung Hee
University
22
Fragmentation (cont’d)
The maximum length of the IP datagram equals to the
largest MTU defined so far (65,535 bytes)
Therefore, for the other physical networks we must
divide the datagram : fragmentation
datagram that can be fragmented by the source host
or any router in the path, but the reassembly of
datagram is done by the destination
When a datagram is fragmented, required parts of
the header must be copied by all fragments.

Changing the values of the three fields : flags, fragmentation
offset, and total length

The rest of fields must be copied

Checksum must be recalculated
Kyung Hee
University
23
Fragmentation (cont’d)
Fields related to fragmentation
Identification : 16 bit-field

Datagram id that is originated by the source host
–


Therefore, Source IP address + datagram id (identification)
All fragments having same identification number
Identification No. to be used for the destination in
reassembling the datagram
Flags : 3 bit-field

D : Do not fragment (1)
–

M : More fragment (0)
–
Kyung Hee
University
If it can not pass the datagram through any available physical
network, it discards the datagram and send ICMP error
message to the source host
0 : last fragment or only fragment
24
Fragmentation (cont’d)
 Fragmentation offset : 13-bit field
Showing relative position of this fragment with respect to the
whole datagram
Measured in units of 8 bytes : forcing hosts or routers that
fragment datagrams to choose the size of each fragment so that
the first byte number is divisible by eight
Kyung Hee
University
25
Fragmentation (cont’d)
Kyung Hee
University
26
8.3 Options
 Variable part of the IP datagram : the maximum of 40 bytes
 Format : Code, Length, and Data
Kyung Hee
University
27
Options (cont’d)
 Code field
8 bits length and containing 3 subfields : copy,
class, and number
Copy



Controlling the presence of the option in fragmentation
0 : meaning that option must be copied only to the first
fragment
1 : meaning the option must be copied to all fragments
Class


Kyung Hee
University
Defining the general purpose of the option
00 : datagram control, 01 : reserved, 10 : Debugging and
management, 11: reserved
28
Options (cont’d)
Number

Defining the type of the option : only 6 options that are
currently being used
 Length
defining the total length of the option including the
code field and length field itself
 Data
containing the data that specific options require
Kyung Hee
University
29
Options (cont’d)
 Option Types
Kyung Hee
University
30
Options (cont’d)
No Operation

Kyung Hee
University
one byte option used as a filler between options
31
Options (cont’d)
End of Option
one-byte option used for padding at the end of the
option field
used as the last option
Kyung Hee
University
32
Options (cont’d)
Record Route
used to record the internet routers that handle the
datagram
list up to 9 router IP addresses since the max. size
of the header is 60 bytes (Base header : 20 bytes)
pointer field
Kyung Hee
University

An offset integer field containing the byte number of the
first empty entry (available entry)

When leaving the source, the pointer field has a value of
four, pointing to the first empty field
33
Options (cont’d)
Record route option
Kyung Hee
University
34
Options (cont’d)
Kyung Hee
University
35
Options (cont’d)
 Strict Source Route
used by the source to predetermine a route for the datagram as
it travels through the Internet
can choose a route with specific type of service : minimum
delay or maximum throughput
Kyung Hee
University
36
Options (cont’d)
Strict source route concept
Kyung Hee
University
37
Options (cont’d)
Loose Source Route
Kyung Hee
University

similar to the strict source route, but it is more relaxed

each router in the list must be visited, but the datagram can
visit other routers as well
38
Options (cont’d)
Time Stamp
Kyung Hee
University

used to record the time of datagram processing by a router

expressed in millisecond from the midnight, Universal Time
39
Options (cont’d)
overflow field : recording the number of routers that
could not add their timestamp because no more
fields were available
Use of flag in timestamp
Kyung Hee
University
40
Options (cont’d)
Timestamp concept (when flag =1)
Kyung Hee
University
41
8.4 Checksum
 Error detection method used by most TCP/IP
protocols
 Checksum calculation at the sender
The packet is divided into k sections, each of n bits (
n is usually 16)
All sections are added together using one’s
complement arithmetic
The final result is complemented to make the
checksum
Kyung Hee
University
42
Checksum (cont’d)
 Checksum calculation at the receiver
The packet is divided into k sections, each of n bits.
All sections are added together using one’s
complement arithmetic
The result is complemented
If the final result is 0, the packet is accepted;
otherwise it is rejected
Kyung Hee
University
43
Checksum (cont’d)
 Checksum concept
Kyung Hee
University
44
Checksum (cont’d)
 Checksum in one’s complement arithmetic
Kyung Hee
University
45
Checksum (cont’d)
 Checksum in the IP Packet
covering only the header, not the data
Kyung Hee
University

all higher level protocols that encapsulate data in the IP
datagram have a checksum field that covers the whole
packet

the header changes with each visited router, but data does
not. So the checksum includes only the part which has
changed

if each router must recalculates the checksum, it is needed
to have the more processing time for each router
46
Checksum (cont’d)
 Example
Kyung Hee
University
47
8.5 IP Package
 IP package : 8 components
Header-adding module
Processing module
Routing module
fragmentation module
reassembly module
routing table
MTU table
reassembly table
Kyung Hee
University
48
IP Package (cont’d)
 IP components
Kyung Hee
University
49
IP Package(cont’d)
 The operation of IP package
receiving an IP packet, either from the data link layer
or a higher level protocol
if the packet comes from a upper layer protocol, it
should be delivered to the data link layer
if the packet comes from the data link layer,
forwarding to data link or a upper layer ( the
destination is same as the station address)
Kyung Hee
University
50
IP Package (cont’d)
 Header-adding Module
Receive : data, destination address
1. Encapsulate the data in an IP datagram
2. Calculate the checksum and insert it in the checksum
field
3. Send the data to the corresponding input queue
4. Return
Kyung Hee
University
51
IP Package (cont’d)
 Processing Module
1. Remove one datagram from one of the input queues
2. if (destination address is 127.X.Y.Z or matches one of the local
addresses)
1. Send datagram to the reassembly module.
2. Return
3. if (machine is a router)
1. Decrement TTL
4. if (TTL less than or equal to zero)
1. Discard the datagram
2. Send an ICMP error message
3. Return
5. Send the datagram to the routing module
6. Return
Kyung Hee
University
52
IP Package (cont’d)
 Queues
Input queues and output queues
 Routing table
used by the routing module to determine the nexthop address of the packet
 Routing module
receiving an IP packet from the processing module
sending the packet with the information to the
fragmentation module
Kyung Hee
University
53
IP Package (cont’d)
 MTU Table
to find the maximum transfer unit of a particular
interface.
Kyung Hee
University
54
IP Package (cont’d)

Fragmentation Module
Receive : an IP packet from routing module
1.
Extract the size of the datagram
2.
if (size > MTU of the corresponding network)
1.
If (D (do not fragment) bit is set
1.
2.
3.
2.
Discard the datagram
Send an ICMP error message
Return
Else
1.
2.
3.
4.
5.
6.
Calculate the maximum size
Divide the datagram into fragments
Add header to each fragment
Add required options to each fragment
Send the datagram
Return
3. Else
Kyung Hee
University
1.
Send the datagram
4. Return
55
IP Package (cont’d)
 Reassembly Table
State field : FREE or IN-USE
Source IP address of datagram
Datagram ID
Time-out : a predetermined amount of time in which
all fragments must arrive
Fragment field : a pointer to a linked list of
fragments
Kyung Hee
University
56
IP Package (cont’d)
Kyung Hee
University
57
IP Package (cont’d)
 Reassembly Module
Receive : an IP packet from the processing module
1. If (offset value is zero and the M bit is 0)
1. Send the datagram to the appropriate queue
2. Return
2. Search the reassembly table for the corresponding entry
3. If (not found)
1. Create a new entry
Kyung Hee
University
58
IP Package (cont’d)
4. Insert the fragment at the appropriate place in the linked
list
1.
if (all fragments have arrived)
1.
2.
3.
2.
Reassemble the fragments
Deliver the datagram to the corresponding upper layer protocol
Return
Else
1.
2.
Check the time-out
if (time-out expired)
1.
2.
Discard all fragment
Send an ICMP error message
5. Return
Kyung Hee
University
59
Summary (1)
 IP is an unreliable connectionless protocol responsible for sourceto-destination delivery.
 Packets in the IP layer are called datagrams
 A datagram consists of a header (20 to 60 bytes) and data.
 The IP header contains the following information: version number,
header length, differentiated services, datagram length,
identification number, fragmentation flags, fragmentation offset,
time to live, protocol, checksum, source address, destination
address, and options.
 The maximum length of a datagram is 65,535 bytes.
 The MTU is the maximum number of bytes that a data link protocol
can encapsulate. MTUs vary from protocol to protocol.
Kyung Hee
University
60
Summary (2)
Fragmentation is the division of a datagram into smaller
units to accommodate the MTU of a data link protocol.
The fields in the IP header that relate to fragmentation are
the identification number, the fragmentation flags, and the
fragmentation offset.
The IP datagram header consists of a fixed, 20-byte
section and a variable options section with a maximum of
40 bytes.
The options section of the IP header is used for network
testing and debugging.
The options header contains the following information: a
code field that identifies the option, option length, and the
specific data.
Kyung Hee
University
61
Summary (3)
 The six IP options each have a specific function. They are as follows:
filler between options for alignment purposes, padding, recording the
route the datagram takes, selection of a mandatory route by the
sender, selection of certain routers that must be visited, and
recording of processing times at routers.
 The ping and traceroute utilities in UNIX can be used to implement
some of the IP options.
 The error detection method used by IP is the checksum.
 The checksum uses one's complement arithmetic to add equal-size
sections of the IP header. The complemented result is stored in the
checksum field. The receiver also uses one's complement arithmetic
to check the header.
 An IP package can consist of the following: a header-adding module,
a processing module, a forwarding module, a fragmentation module, a
reassembly module, a routing table, an MTU table, and a reassembly
table.
Kyung Hee
University
62