* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download Document
Survey
Document related concepts
Network tap wikipedia , lookup
Airborne Networking wikipedia , lookup
Recursive InterNetwork Architecture (RINA) wikipedia , lookup
Spectrum reallocation wikipedia , lookup
IEEE 802.1aq wikipedia , lookup
Computer network wikipedia , lookup
Wake-on-LAN wikipedia , lookup
Power over Ethernet wikipedia , lookup
List of wireless community networks by region wikipedia , lookup
Wireless USB wikipedia , lookup
Policies promoting wireless broadband in the United States wikipedia , lookup
Cracking of wireless networks wikipedia , lookup
Wireless security wikipedia , lookup
Transcript
Wireless LAN Technology Wireless LANs • A wireless LAN uses wireless transmission medium. • Used to have high prices, low data rates, occupational safety concerns, and licensing requirements. • Problems have been addressed. • Popularity of wireless LANs has grown rapidly. 2 Wireless LAN Applications • • • • LAN Extension Cross-building interconnect Nomadic Access Ad hoc networking LAN Extension • Wireless LAN linked into a wired LAN on same premises – Wired LAN • Backbone • Support servers and stationary workstations – Wireless LAN • Stations in large open areas • Manufacturing plants, stock exchange trading floors, and warehouses • Saves installation of LAN cabling • Eases relocation and other modifications to network structure • However, increasing reliance on twisted pair cabling for LANs – Most older buildings already wired with Cat 3 cable – Newer buildings are prewired with Cat 5 • Wireless LAN to replace wired LANs is beginning to happen, but most popular as a team • In some environments, role for the wireless LAN – Buildings with large open areas • Manufacturing plants, stock exchange trading floors, warehouses • Historical buildings • Small offices where wired LANs not economical 5 Applications of Wireless LANs Single Cell Wireless LAN (typical) 6 Applications of Wireless LANs Multi-Cell Wireless LAN 7 Cross-Building Interconnect • Connect LANs in nearby buildings – Wired or wireless LANs • Point-to-point wireless link is used • Devices connected are typically bridges or routers Ad Hoc Networking • Temporary peer-to-peer network set up to meet immediate need • Example: – Group of employees with laptops convene for a meeting; employees link computers in a temporary network for duration of meeting Infrastructure Wireless LAN Applications of Wireless LANs Ad Hoc Networking •Peer-to-peer network, •No centralised server, •No infrastructure, •Temporary nature. 11 Wireless LAN Requirements THROUGHPUT – should make efficient use of medium NUMBER OF NODES- hundreds of nodes across multiple cells CONNECTION TO BACKBONE LAN – use of control modules SERVICE AREA – coverage area of 100 to 300m BATTERY POWER CONSUMPTION – reduce power consumption while not in use TRANSMISSION ROBUST AND SECURITY– reliability and privacy/security COLLOCATED NETWORK OPERATION – possible interference between LANs LICENSE-FREE OPERATION – not having to secure a license for the frequency band used by the LAN HANDOFF/ROAMING – enable stations to move from one cell to another DYNAMIC CONFIGURATIONaddition, deletion, relocation of end systems without disruption IEEE 802.11 Wireless LANs IEEE 802.11 (also known as Wi-Fi) defines a standard for the physical and the data link layers of wireless LANs. The standard is defined for the license-free Industrial, Scientific, Medical (ISM) bands. ISM Bands 13 ISM Bands 14 15 IEEE 802 Protocol Layers Protocol Architecture • Functions of physical layer: – Encoding/decoding of signals – Preamble generation/removal (for synchronization) – Bit transmission/reception – Includes specification of the transmission medium Protocol Architecture • Functions of medium access control (MAC) layer: – On transmission, assemble data into a frame with address and error detection fields – On reception, disassemble frame and perform address recognition and error detection – Govern access to the LAN transmission medium • Functions of logical link control (LLC) Layer: – Provide an interface to higher layers and perform flow and error control IEEE 802.11 Protocol Stack 19 IEEE 802.11 Architecture IEEE 802.11 Architecture • Distribution system (DS) • Access point (AP) • Basic service set (BSS) – Stations competing for access to shared wireless medium – Isolated or connected to backbone DS through AP • Extended service set (ESS) – Two or more basic service sets interconnected by DS IEEE 802.11 – Architecture • Smallest building block is basic service set (BSS) – Number of stations – Same MAC protocol – Competing for access to same shared wireless medium • May be isolated or connected to backbone distribution system (DS) through access point (AP) – AP functions as bridge and a relay pt • MAC protocol may be distributed or controlled by central coordination function in AP • BSS generally corresponds to cell • DS can be switch, wired network, or wireless network 22 BSS Configuration • Simplest: each station belongs to single BSS – Within range only of other stations within BSS • Can have two BSS’s overlapping – Station could participate in more than one BSS • Association between station and BSS dynamic – Stations may turn off, come within range, and go out of range 23 Extended Service Set (ESS) • When two or more BSS are interconnected by DS – Typically, DS is wired backbone but can be any network • Appears as single logical LAN to LLC (logical Link Control) • In BSS, client stations do not communicate directly with each other, must pass through an AP • In IBSS stations all communicate directly, no AP is required 24 Access Point (AP) • Logic within station that provides access to DS – Provides DS services in addition to acting as station • To integrate IEEE 802.11 architecture with wired LAN, portal used • Portal logic implemented in device that is part of wired LAN and attached to DS – E.g. Bridge or router 25 IEEE 802.11 Protocol Stack 802.11 network standards 802.11 Releas protocol e version Freq. (GHz) Bandwidt h (MHz) Data rate per stream (Mbit/s) Allowable MIMO streams Modulati Approxim Approxima on ate te outdoor indoor range(m) range(m) 97 Jun 1997 2.4 20 1, 2 1 a Sep 1999 5 20 6, 9, 12, 18, 24, 36, 48, 54 1 b Sep 1999 2.4 20 5.5, 11 1 DSSS 38 140 g Jun 2003 2.4 20 6, 9, 12, 18, 24, 36, 48, 54 1 OFDM, DSSS 38 140 n Oct 2009 2.4/5 20 7.2, 14.4, 21.7, 28.9, 43.3, 57.8, 65, 72.2 15, 30, 45, 60, 90, 120, 135, 150 4 OFDM 70 250 70 250 3.7 40 DSSS, FHSS 20 100 OFDM 35 120 — 5,000 26 802.11n • IEEE 802.11n has enhancements in three general areas: – multiple-input-multiple-output (MIMO) antenna architecture • most important enhancement – radio transmission scheme • increased capacity – MAC enhancements • most significant change is to aggregate multiple MAC frames into a single block for transmission IEEE 802.11 MAC Sublayer CSMA/CD cannot be used in wireless LANs. Because not all stations are within the radio range of each other. It is also not possible to detect collision while transmitting because most stations are half-duplex. (a) The hidden station problem. (b) The exposed station problem 28 IEEE 802.11 MAC Sublayer •IEEE 802.11 MAC algorithm is called Distributed Foundation Wireless MAC (DFWMAC). •DFWMAC defines two sublayers. Distributed Coordination Function (DCF) and Point Coordination Function (PCF). •DCF is distributed with an optional centralised access control that works on top of that (i.e., PCF). •DCF is based on CSMA/CA (CSMA with Collision Avoidance) or MACAW. •All frame transmissions are acknowledged with ACK packets. This is the way collision is avoided. 29 IEEE 802.11 MAC Sublayer DCF/MACAW Virtual sensing A C B D 30 Summarise DCF • • • No Central Control Stations Compete for Time, just as in Ethernet 2 types (a) When a station wants to transmit it senses the channel- if idle, sends frame, it does not sense while transmitting- data may be destroyed. If busy defers some time (t) using Ethernet binary exponential back-off. (b) as discussed on previous slide- channel sensing 31 Distributed Coordination Function • DCF sublayer uses CSMA if station has frame to send it listens to medium if medium is idle, station may transmit else waits until current transmission is complete • no collision detection since on a wireless network • DCF includes delays that act as a priority scheme IEEE 802.11 MAC Sublayer More on Distributed Coordination Function (DCF) IFS: InterFrame Space 33 IEEE 802.11 MAC Sublayer Point Coordination Function (PCF) •The access point periodically broadcasts beacon frames that contains system parameters and invites stations to request bandwidth. •The access point can provide guaranteed bandwidth to stations that are working in PCF mode. •PCF allows the transport of real-time traffic over the wireless LAN. •PCF is not very well defined in the standard, and not commonly implemented in most commercial access points. However, it exists in the standard specification. 34 Point Coordination Function (PCF) alternative access method implemented on top of DCF polling by centralized polling master (point coordinator) uses PIFS when issuing polls if point coordinator receives response, it issues another poll using PIFS when poll issued, polled station may respond using SIFS point coordinator polls in round-robin to stations configured for polling if no response during expected turnaround time, coordinator issues poll coordinator could lock out asynchronous traffic by issuing polls have a superframe interval defined 802.11 MAC Frame Format 36 WiFi’s future: faster, smarter, and fewer cables IEEE 802.11ac: Standard finalization is in late 2012, with final 802.11 Working Group approved in Feb 2014. Theoretically, this specification will enable multi-station WLAN throughput of at least 1 gigabit per second and a maximum single link throughput of at least 500 Mbit/s. This is accomplished by extending the air interface concepts embraced by 802.11n: wider RF bandwidth (up to 160 MHz), more MIMO spatial streams (up to 8), multi-user MIMO, and high-density modulation (up to 256 QAM). IEEE 802.11ac™-2013 2014 INTERNATIONAL CES, LAS VEGAS, USA, 7 January 2014 - See more at: http://standards.ieee.org/news/2014/ieee_802_11ac_ballot.html#sthash.o IzisTd8.dpuf 802.11ac alone may be fast enough (7Gbps) to begin making wired networks redundant. 37 38 39 WiGig- Wireless Gigabit Alliance IEEE 802.11 ad • In June 2011, WiGig announced the release of its certification-ready version 1.1 specification. • The WiGig specification will allow devices to communicate without wires at multi-gigabit speeds. • 60GHz, (microwave Wi-Fi), low power, very high performance – possibly 7Gbps – but over only very short ranges, perhaps one to 10 metres, within a single room 40 IEEE 802.11ac And 802.11ad? IEEE 802.11ac and 802.11ad both provide much higher data throughputs than their predecessors. Yet they have much different potential uses. IEEE 802.11ac is an evolution of previous WLAN capability. It gives the “unwired office” the ability to compete directly with gigabit wired systems while offering much better layout and connection flexibility. In contrast, IEEE 802.11ad is a new solution that provides adhoc short-range connectivity in support of extremely high data rates. 41 Super Wi-Fi (802.11 af) White-Fi Standard was approved in February 2014 Cognitive radio technology is used Employs unused TV spectrum at frequencies between 54MHz and 790MHz, over very long ranges (possibly several miles) It can offer reasonable throughput, perhaps 26.7Mb/s for 6 and 7 MHz channels and 35.6 Mbit/s for 8 MHz channels. With four spatial streams and four bonded channels, the maximum data rate is 426.7 Mbit/s in 6 and 7 MHz channels and 568.9 Mbit/s for 8 MHz channels. 42 802.11ah Low Power Wi-Fi standard is expected to be finalized and arrive in 2016 will provide bandwidth for sensors and monitors in gadgets and appliances that will join up to create the Internet Of Things. 900MHz, large coverage, garages, back yards, attics, buildings, factories, malls Relay Access Point (AP) Power saving https://www.qualcomm.com/i nvention/research/projects/wifi-evolution/80211ah 43 WirelessHD(WiHD) • The specification was finalized in January 2008. • Developed by Intel, LG Electronics, Panasonic, Philips, Samsung, Silicon Image, Sony, and Toshiba, • The WirelessHD specification is based on a 7 GHz channel in the 60 GHz Extremely High Frequency radio band. It allows either lightly-compressed (proprietary wireless link-aware codec) or uncompressed digital transmission of high-definition video and audio and data signals, essentially making it equivalent of a wireless HDMI. First-generation implementation achieves data rates from 4 Gbit/s, but the core technology allows theoretical data rates as high as 25 Gbit/s (compared to 10.2 Gbit/s for HDMI 1.3 and 21.6 Gbit/s for DisplayPort 1.2), permitting WirelessHD to scale to higher resolutions, color depth, and range. The 1.1 version of the specification increases the maximum data rate to 28 Gbit/s, supports common 3D formats, 4K resolution, WPAN data, lowpower mode for portable devices, and HDCP 2.0 content protection. 44 Specification Summary operating in the unlicensed and globally available 60 GHz frequency band a secure, quick and easy way to wirelessly connect and share data or play their HD content among a wide range of devices, e.g. laptops, tablets, televisions, Blu-ray players, DVRs, camcorders, gaming consoles, adapter products Supports data transmission rates at 10-28 Gbps, more than 20x faster than the highest 802.11n data rates. 3D supported. 4K resolution Data support. file transfers at faster than 1 Gbps for portable and fixed devices. Hollywood approved content protection with DTCP and HDCP2.0 over WirelessHD technology, meaning WirelessHD systems will have full access to the most important premium digital content 45 Product list WirelessHD (aka WiHD) technology provides the only Full HD wireless video link with perfect video quality and no gaming lag for a stellar gaming experience. 46 http://www.portablehifi.com/dvdo-air-wireless-hd-connectionsystem/ 47 • William Stallings, “Data and Computer Communications”, chapter 13, 14. • A. S. Tanenbaum, “Computer Networks”, chapter 4. • http://iamwww.unibe.ch/~rvs/lectures/SS98/cn/applets/Ethernet/et hernet.htm (CSMA/CD applet) • http://www.wi-fiplanet.com/ • http://www.vicomsoft.com/knowledge/reference/wir eless1.html 48