Download Chapter 4. Network Layer

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Zigbee wikipedia , lookup

CAN bus wikipedia , lookup

Net bias wikipedia , lookup

IEEE 802.1aq wikipedia , lookup

Distributed firewall wikipedia , lookup

Deep packet inspection wikipedia , lookup

Multiprotocol Label Switching wikipedia , lookup

Zero-configuration networking wikipedia , lookup

Piggybacking (Internet access) wikipedia , lookup

Wake-on-LAN wikipedia , lookup

Asynchronous Transfer Mode wikipedia , lookup

Internet protocol suite wikipedia , lookup

Computer network wikipedia , lookup

IEEE 1355 wikipedia , lookup

List of wireless community networks by region wikipedia , lookup

Cracking of wireless networks wikipedia , lookup

Network tap wikipedia , lookup

Packet switching wikipedia , lookup

Airborne Networking wikipedia , lookup

Recursive InterNetwork Architecture (RINA) wikipedia , lookup

UniPro protocol stack wikipedia , lookup

Transcript
Chapter 4
Network Layer
Computer
Networking: A Top
Down Approach
6th edition
Jim Kurose, Keith Ross
Addison-Wesley
March 2012
All material copyright 1996-2012
J.F Kurose and K.W. Ross, All Rights Reserved
Network Layer 4-1
Chapter 4: network layer
chapter goals:

understand principles behind network layer
services:






network layer service models
forwarding versus routing
how a router works
routing (path selection)
broadcast, multicast
instantiation, implementation in the Internet
Network Layer 4-2
Chapter 4: outline
4.1 introduction
4.2 virtual circuit and
datagram networks
4.3 what’s inside a router
4.4 IP: Internet Protocol




datagram format
IPv4 addressing
ICMP
IPv6
4.5 routing algorithms
 link state
 distance vector
 hierarchical routing
4.6 routing in the Internet
 RIP
 OSPF
 BGP
4.7 broadcast and multicast
routing
Network Layer 4-3
Network layer





transport segment from
sending to receiving host
on sending side
encapsulates segments
into datagrams
on receiving side, delivers
segments to transport
layer
network layer protocols
in every host, router
router examines header
fields in all IP datagrams
passing through it
application
transport
network
data link
physical
network
data link
physical
network
data link
physical
network
data link
physical
network
data link
physical
network
data link
physical
network
data link
physical
network
data link
physical
network
data link
physical
network
data link
physical
network
data link
physical
network
data link
physical
application
transport
network
data link
physical
Network Layer 4-4
Two key network-layer functions


forwarding: move packets
from router’s input to
appropriate router
output
routing: determine route
taken by packets from
source to dest.
 routing algorithms
analogy:


routing: process of
planning trip from source
to dest
forwarding: process of
getting through single
interchange
Network Layer 4-5
Interplay between routing and forwarding
routing algorithm
routing algorithm determines
end-end-path through network
local forwarding table
header value output link
forwarding table determines
local forwarding at this router
0100
0101
0111
1001
3
2
2
1
value in arriving
packet’s header
0111
1
3 2
Network Layer 4-6
Connection setup

3rd important function in some network
architectures:
 ATM, frame relay, X.25

before datagrams flow, two end hosts and
intervening routers establish virtual connection
 routers get involved

network vs transport layer connection service:
 network: between two hosts (may also involve intervening
routers in case of VCs)
 transport: between two processes
Network Layer 4-7
Network service model
Q: What service model for “channel” transporting
datagrams from sender to receiver?
example services for
individual datagrams:


guaranteed delivery
guaranteed delivery with
less than 40 msec delay
example services for a flow
of datagrams:



in-order datagram
delivery
guaranteed minimum
bandwidth to flow
restrictions on changes in
inter-packet spacing
Network Layer 4-8
Network layer service models:
Network
Architecture
Internet
Service
Model
Guarantees ?
Congestion
Bandwidth Loss Order Timing feedback
best effort none
ATM
CBR
ATM
VBR
ATM
ABR
ATM
UBR
constant
rate
guaranteed
rate
guaranteed
minimum
none
no
no
no
yes
yes
yes
yes
yes
yes
no
yes
no
no (inferred
via loss)
no
congestion
no
congestion
yes
no
yes
no
no
Network Layer 4-9
Chapter 4: outline
4.1 introduction
4.2 virtual circuit and
datagram networks
4.3 what’s inside a router
4.4 IP: Internet Protocol




datagram format
IPv4 addressing
ICMP
IPv6
4.5 routing algorithms
 link state
 distance vector
 hierarchical routing
4.6 routing in the Internet
 RIP
 OSPF
 BGP
4.7 broadcast and multicast
routing
Network Layer 4-10
Connection, connection-less service



datagram network provides network-layer
connectionless service
virtual-circuit network provides network-layer
connection service
analogous to TCP/UDP connecton-oriented /
connectionless transport-layer services, but:
 service: host-to-host
 no choice: network provides one or the other
 implementation: in network core
Network Layer 4-11
Virtual circuits
“source-to-dest path behaves much like telephone
circuit”
 performance-wise
 network actions along source-to-dest path




call setup, teardown for each call before data can flow
each packet carries VC identifier (not destination host
address)
every router on source-dest path maintains “state” for
each passing connection
link, router resources (bandwidth, buffers) may be
allocated to VC (dedicated resources = predictable
service)
Network Layer 4-12
VC implementation
a VC consists of:
1. path from source to destination
2. VC numbers, one number for each link along path
3. entries in forwarding tables in routers along path


packet belonging to VC carries VC number
(rather than dest address)
VC number can be changed on each link.

new VC number comes from forwarding table
Network Layer 4-13
Figure 8.13 Source-to-destination data transfer in a virtual-circuit network
8.14
Figure 8.13 Source-to-destination data transfer in a virtual-circuit network
8.15
Figure 8.14 Setup request in a virtual-circuit network
8.16
Figure 8.15 Setup acknowledgment in a virtual-circuit network
8.17
VC forwarding table
22
12
1
1
2
3
1
…
3
VC number
interface
number
forwarding table in
northwest router:
Incoming interface
2
32
Incoming VC #
12
63
7
97
…
Outgoing interface
Outgoing VC #
3
1
2
3
22
18
17
87
…
…
VC routers maintain connection state information!
Network Layer 4-18
Virtual circuits: signaling protocols



used to setup, maintain teardown VC
used in ATM, frame-relay, X.25
not used in today’s Internet
application
5. data flow begins
transport
4. call connected
network
1. initiate call
data link
physical
application
transport
3. accept call
network
2. incoming call
data link
physical
6. receive data
Network Layer 4-19
Datagram networks


no call setup at network layer
routers: no state about end-to-end connections
 no network-level concept of “connection”

packets forwarded using destination host address
application
transport
network 1. send datagrams
data link
physical
application
transport
2. receive datagrams network
data link
physical
Network Layer 4-20
Datagram forwarding table
routing algorithm
local forwarding table
dest address output link
address-range 1
address-range 2
address-range 3
address-range 4
4 billion IP addresses, so
rather than list individual
destination address
list range of addresses
(aggregate table entries)
3
2
2
1
IP destination address in
arriving packet’s header
1
3 2
Network Layer 4-21
Datagram forwarding table
Destination Address Range
Link Interface
11001000 00010111 00010000 00000000
through
11001000 00010111 00010111 11111111
0
11001000 00010111 00011000 00000000
through
11001000 00010111 00011000 11111111
1
11001000 00010111 00011001 00000000
through
11001000 00010111 00011111 11111111
2
otherwise
3
Network Layer 4-22
Longest prefix matching
longest prefix matching
when looking for forwarding table entry for given
destination address, use longest address prefix that
matches destination address.
Destination Address Range
Link interface
11001000 00010111 00010*** *********
0
11001000 00010111 00011000 *********
1
11001000 00010111 00011*** *********
2
otherwise
3
examples:
DA: 11001000 00010111 00010110 10100001
DA: 11001000 00010111 00011000 10101010
which interface?
which interface?
Network Layer 4-23
Destination Address Range
Link Interface
11100000 00000000 00000000 00000000
Through
11100000 00000000 00111111 11111111
0
11100000 00000000 01000000 00000000
Through
11100000 00000000 01111111 11111111
1
11100000 00000000 10000000 00000000
Through
11100001 11111111 11111111 11111111
2
otherwise
3
Network Layer 4-24
Consider a datagram network using 8-bit host
addresses. Suppose a router uses longest prefix
matching and has the following forwarding table:
Prefix Match
Interface
00
0
01
1
100
2
otherwise
3
For each of the four interface, give the associated range of destination host
addresses and the number of addresses in the range.
Network Layer 4-25
Datagram or VC network: why?
Internet (datagram)

data exchange among
computers
ATM (VC)


 strict timing, reliability
requirements
 need for guaranteed service
 “elastic” service, no strict
timing req.

many link types
 different characteristics
 uniform service difficult

“smart” end systems
(computers)
evolved from telephony
human conversation:

“dumb” end systems
 telephones
 complexity inside
network
 can adapt, perform control,
error recovery
 simple inside network,
complexity at “edge”
Network Layer 4-26
Chapter 4: outline
4.1 introduction
4.2 virtual circuit and
datagram networks
4.3 what’s inside a router
4.4 IP: Internet Protocol




datagram format
IPv4 addressing
ICMP
IPv6
4.5 routing algorithms
 link state
 distance vector
 hierarchical routing
4.6 routing in the Internet
 RIP
 OSPF
 BGP
4.7 broadcast and multicast
routing
Network Layer 4-27
Router architecture overview
two key router functions:


run routing algorithms/protocol (RIP, OSPF, BGP)
forwarding datagrams from incoming to outgoing link
forwarding tables computed,
pushed to input ports
routing
processor
routing, management
control plane (software)
forwarding data
plane (hardware)
high-seed
switching
fabric
router input ports
router output ports
Network Layer 4-28
Input port functions
link
layer
protocol
(receive)
line
termination
lookup,
forwarding
switch
fabric
queueing
physical layer:
bit-level reception
data link layer:
e.g., Ethernet
decentralized switching:



given datagram dest., lookup output port
using forwarding table in input port
memory (“match plus action”)
goal: complete input port processing at
‘line speed’
queuing: if datagrams arrive faster than
forwarding rate into switch fabric
Network Layer 4-29
Switching fabrics


transfer packet from input buffer to appropriate
output buffer
switching rate: rate at which packets can be
transfer from inputs to outputs
 often measured as multiple of input/output line rate
 N inputs: switching rate N times line rate desirable

three types of switching fabrics
memory
memory
bus
crossbar
Network Layer 4-30
Switching via memory
first generation routers:
 traditional
computers with switching under direct control
of CPU
 packet copied to system’s memory
 speed limited by memory bandwidth (2 bus crossings per
datagram)
input
port
(e.g.,
Ethernet)
memory
output
port
(e.g.,
Ethernet)
system bus
Network Layer 4-31
Switching via a bus



datagram from input port memory
to output port memory via a
shared bus
bus contention: switching speed
limited by bus bandwidth
32 Gbps bus, Cisco 5600: sufficient
speed for access and enterprise
routers
bus
Network Layer 4-32
Switching via interconnection network




overcome bus bandwidth limitations
banyan networks, crossbar, other
interconnection nets initially
developed to connect processors in
multiprocessor
advanced design: fragmenting
datagram into fixed length cells,
switch cells through the fabric.
Cisco 12000: switches 60 Gbps
through the interconnection
network
crossbar
Network Layer 4-33
Output ports
switch
fabric
datagram
buffer
queueing


link
layer
protocol
(send)
line
termination
buffering required when datagrams arrive from
fabric faster than the transmission rate
scheduling discipline chooses among queued
datagrams for transmission
Network Layer 4-34
Output port queueing
switch
fabric
at t, packets more
from input to output


switch
fabric
one packet time later
buffering when arrival rate via switch exceeds
output line speed
queueing (delay) and loss due to output port buffer
overflow!
Network Layer 4-35
How much buffering?

RFC 3439 rule of thumb: average buffering equal
to “typical” RTT (say 250 msec) times link
capacity C
 e.g., C = 10 Gpbs link: 2.5 Gbit buffer

recent recommendation: with N flows, buffering
equal to
RTT . C
N
Network Layer 4-36
Input port queuing


fabric slower than input ports combined -> queueing may
occur at input queues
 queueing delay and loss due to input buffer overflow!
Head-of-the-Line (HOL) blocking: queued datagram at front
of queue prevents others in queue from moving forward
switch
fabric
output port contention:
only one red datagram can be
transferred.
lower red packet is blocked
switch
fabric
one packet time later:
green packet
experiences HOL
blocking
Network Layer 4-37
Homework
1.
Consider a datagram network using 32-bit host
addresses. Suppose a router has four links,
numbered 0 through 3, and packets are to be
forwarded to the link interface as follows:
Destination Address Range
Link Interface
11100000 00000000 00000000 00000000
Through
11100000 00000000 11111111 11111111
0
11100000 00000001 00000000 00000000
Through
11100000 00000001 11111111 11111111
1
11100000 00000010 00000000 00000000
Through
11100001 11111111 11111111 11111111
2
otherwise
3
Network Layer 4-38
a. Provide a forwarding table that uses longest prefix
matching.
b. Describe how your forwarding table determines
the appropriate link interface for datagrams with
destination addresses:
11111000 10010001 01010001 01010101
11100000 00000000 11000011 00111100
11100001 10000000 00010001 01110111
Network Layer 4-39
2. Consider a datagram network using 8-bit host
addresses. Suppose a router uses longest prefix
matching and has the following forwarding table:
Prefix Match
Interface
11
0
101
1
100
2
otherwise
3
For each of the four interface, give the associated range of destination host
addresses and the number of addresses in the range.
Network Layer 4-40