Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Algebra 2 Interactive Chalkboard Copyright © by The McGraw-Hill Companies, Inc. Send all inquiries to: GLENCOE DIVISION Glencoe/McGraw-Hill 8787 Orion Place Columbus, Ohio 43240 Lesson 2-1 Relations and Functions Lesson 2-2 Linear Equations Lesson 2-3 Slope Lesson 2-4 Writing Linear Equations Lesson 2-5 Modeling Real-World Data: Using Scatter Plots Lesson 2-6 Special Functions Lesson 2-7 Graphing Inequalities Example 1 Domain and Range Example 2 Vertical Line Test Example 3 Graph Is a Line Example 4 Graph Is a Curve Example 5 Evaluate a Function Click the mouse button or press the Space Bar to display the answers. Relation A relation is a set of inputs and outputs, often written as ordered pairs (input, output). We can also represent a relation as a mapping diagram or a graph. For example, the relation can be represented as: Mapping Diagram of Relation Domain & Range The first components in the ordered pairs (xcoordinate) make up the domain. The second components (ycoordinate or f(x) coordinate) make up the range. Domain & Range For example, the group of ordered pairs (1, 2), (3, 5), and (7, 10) is a relation. The Domain of this relation consists of the x-coordinates of the ordered pairs and the range consists of the y-coordinates. Domain: (1, 3, 7} Range: {2, 5, 10} Function A function is a relation in which each input has only one output. For example, the relation {(1, 2), (3, 5), and (7, 10)} is a function since no x values produce more than one y value. The relation {(1, 2), (3, 4), and (1, 5)} would not be considered a function since the x value 1 produces two different y values, 2 and 5. Functions • The diagram on the right shows the relation {(-1, 2), (0, 2), (1, 3), (2, -2), (8, 3)}. • This relation is a function since each x value produces one and only one y value. The Vertical Line Test • To determine if a relation is a function you can use the vertical line test. A relation is a function if there are no vertical lines that intersect the graph at more than one point. • The graph at the right is not a function since it would fail the vertical line test. Function Not a Function State the domain and range of the relation shown in the graph. Is the relation a function? The relation is {(1, 2), (3, 3), (0, –2), (–4, 0), (–3, 1)}. Answer: The domain is {–4, –3, 0, 1, 3}. The range is {–2, 0, 1, 2, 3}. Each member of the domain is paired with exactly one member of the range, so this relation is a function. State the domain and range of the relation shown in the graph. Is the relation a function? Answer: The domain is {–3, 0, 2, 3}. The range is {–2, –1, 0, 1}. Yes, the relation is a function. Transportation The table shows the average fuel efficiency in miles per gallon for light trucks for several years. Graph this information and determine whether it represents a function. Year Fuel Efficiency (mi/gal) 1995 20.5 1996 1997 1998 1999 20.8 20.6 20.9 20.5 2000 2001 20.5 20.4 Year Fuel Efficiency (mi/gal) 1995 20.5 1996 1997 1998 1999 20.8 20.6 20.9 20.5 2000 2001 20.5 20.4 Use the vertical line test. Notice that no vertical line can be drawn that contains more than one of the data points. Answer: Yes, this relation is a function. Health The table shows the average weight of a baby for several months during the first year. Graph this information and determine whether it represents a function. Age (months) Weight (pounds) 1 12.5 2 4 6 9 16 22 24 25 12 26 Answer: Yes, this relation is a function. Graph the relation represented by Make a table of values to find ordered pairs that satisfy the equation. Choose values for x and find the corresponding values for y. Then graph the ordered pairs. x y –1 0 1 2 –4 –1 2 5 (2, 5) (1, 2) (0, –1) (–1, –4) Find the domain and range. Since x can be any real number, there is an infinite number of ordered pairs that can be graphed. All of them lie on the line shown. Notice that every real number is the x-coordinate of some point on the line. Also, every real number is the y-coordinate of some point on the line. (2, 5) (1, 2) (0, –1) (–1, –4) Answer: The domain and range are both all real numbers. Determine whether the relation is a function. This graph passes the vertical line test. For each x value, there is exactly one y value. (2, 5) (1, 2) Answer: Yes, the equation represents a function. (0, –1) (–1, –4) a. Graph Answer: b. Find the domain and range. Answer: The domain and range are both all real numbers. c. Determine whether the relation is a function. Answer: Yes, the equation is a function. Graph the relation represented by Make a table. In this case, it is easier to choose y values and then find the corresponding values for x. Then sketch the graph, connecting the points with a smooth curve. x y 5 2 1 2 5 –2 –1 0 1 2 (5, 2) (2, 1) (1, 0) (2, –1) (5, –2) Find the domain and range. Every real number is the y-coordinate of some point on the graph, so the range is all real numbers. But, only real numbers that are greater than or equal to 1 are x-coordinates of points on the graph. Answer: The domain is The range is all real numbers. (5, 2) (2, 1) (1, 0) (2, –1) (5, –2) . Determine whether the relation is a function. x y 5 2 1 2 5 –2 –1 0 1 2 (5, 2) (2, 1) (1, 0) (2, –1) (5, –2) You can see from the table and the vertical line test that there are two y values for each x value except x = 1. Answer: The equation a function. does not represent a. Graph Answer: b. Find the domain and range. Answer: The domain is {x|x –3}. The range is all real numbers. c. Determine whether the relation is a function. Answer: No, the equation represent a function. does not Given , find Original function Substitute. Simplify. Answer: Given find Original function Substitute. Multiply. Simplify. Answer: Given , find Original function Substitute. Answer: Given find each value. and a. Answer: 6 b. Answer: 0.625 c. Answer: Class Work: Page 60-61 in your textbooks #18, 20, 22, 28, 30, 35-41 Assignment: Page 60-61 #24, 32, 46, 47 Example 1 Identify Linear Functions Example 2 Evaluate a Linear Function Example 3 Standard Form Example 4 Use Intercepts to Graph a Line Linear Equations • Looks like: • • • • x + 5 = 10 x+y=1 3x – 5y = 12 A linear equation has no operations other than addition, subtraction, and multiplication of a variable by a constant. The variables may not be multiplied together or appear in a denominator. A linear equation does not contain variables with exponents other than 1. The graph of a linear equation is always a straight line. Linear Functions • A function whose ordered pairs satisfy a linear equation. • Linear functions look like: f(x) = x + 3 f(x) = 5x + 1 f(x) = 2x – 4 Linear Functions • Look at the linear function f(x) = x – 7. • This means that you may plug in some value for x, and subtract 7 from it to get f(x). Note: f(x) acts as y. State whether Explain. is a linear function. Answer: This is a linear function because it is in the form State whether Explain. is a linear function. Answer: This is not a linear function because x has an exponent other than 1. State whether Explain. is a linear function. Answer: This is a linear function because it can be written as State whether each function is a linear function. Explain. a. Answer: yes; b. Answer: No; x has an exponent other than 1. c. Answer: No; two variables are multiplied together. Try These State whether each function is linear. Write yes or no. If no, explain your reasoning. h(x) = 2x3 –4x2 + 5 f(x) = 6x - 19 Try These State whether each function is linear. Write yes or no. If no, explain your reasoning. h(x) = 2x3 –4x2 + 5 No, a linear function No, a linear function cannot have a variable cannot have variables in the denominator. raised to powers greater than 1. f(x) = 6x - 19 Yes No, a linear function cannot have square roots. Meteorology The linear function can be used to find the number of degrees Fahrenheit, f (C), that are equivalent to a given number of degrees Celsius, C. On the Celsius scale, normal body temperature is 37C. What is normal body temperature in degrees Fahrenheit? Original function Substitute. Simplify. Answer: Normal body temperature, in degrees Fahrenheit, is 98.6F. There are 100 Celsius degrees between the freezing and boiling points of water and 180 Fahrenheit degrees between these two points. How many Fahrenheit degrees equal 1 Celsius degree? Divide 180 Fahrenheit degrees by 100 Celsius degrees. Answer: 1.8F = 1C Meteorology The linear function can be used to find the distance d(s) in miles from a storm, based on the number of seconds s that it takes to hear thunder after seeing lightning. a. If you hear thunder 10 seconds after seeing lightning, how far away is the storm? Answer: 2 miles b. If the storm is 3 miles away, how long will it take to hear thunder after seeing lightning? Answer: 15 seconds Try These When a sound travels through water, the distance y in meters that the sounds travels in x seconds is given by the equation y = 1440x. a) How far does sounds travel underwater in 5 seconds? b) In air, the equation is y = 343x. Does sound travel faster in air or water? Explain. Try These When a sound travels through water, the distance y in meters that the sounds travels in x seconds is given by the equation y = 1440x. a) How far does sounds travel underwater in 5 seconds? 7200 meters b) In air, the equation is y = 343x. Does sound travel faster in air or water? Explain. Sound travels only 1715 meters in 5 seconds in air, so it travels faster under water. Standard Form of a Linear Equation Ax + By = C Where A, B, and C are integers whose greatest common factor is 1. Example: 5x + 3y = 10 Write in standard form. Identify A, B, and C. Original equation Subtract 3x from each side. Multiply each side by –1 so that A 0. Answer: and Write and C. in standard form. Identify A, B, Original equation Subtract 2y from each side. Multiply each side by –3 so that the coefficients are all integers. Answer: and Write and C. in standard form. Identify A, B, Original equation Subtract 4 from each side. Divide each side by 2 so that the coefficients have a GCF of 1. Answer: and Write each equation in standard form. Identify A, B, and C. a. Answer: and b. Answer: and c. Answer: and Try These Write each equation in standard form. Identify A, B, and C. y = 12x 4x = 8y – 12 x = 7y + 2 Try These Write each equation in standard form. Identify A, B, and C. y = 12x x = 7y + 2 12x – y = 0; x – 7y = 2; A = 12, B = -1, C = 0 A = 1, B = -7, C = 2 4x = 8y – 12 x – 2y = -3; x – y = -6; A = 1, B = -2, C = -3 A = 1, B = -1, C = -6 X-Intercept • The x-intercept is the place at which a graph crosses the x-axis. At the right is the graph of the linear function of y • graph = 2x + 4. In this the x –intercept is –2. In order pair form it is (-2, 0) Y-Intercept • The y-intercept is the place at which a graph crosses the yaxis. In this graph• the y – intercept is 4. In order pair form it is (0, 4) Finding x- and y-intercepts • Since the x-intercept is the place where the graph crosses the x-axis, it is also the place where the yvalue is 0. So, to find the x-intercept of an equation, just plug in 0 for y. And to find the y-intercept, plug in 0 for x. Example: Find the x- and y-intercepts of 2x + 3y = 12. x-intercept: 2x + 3(0) = 12 2x = 12 X=6 Y-intercept: 2(0) + 3y = 12 3y = 12 Y=4 Finding x- and y-intercepts Continued • So this means that our graph hits the x-axis at 6, also known as (6, 0) and hits the y-axis at 4, also known as (0, 4). • The graph of this equation could easily be drawn now that we know two points: 4 6 Find the x-intercept and the y-intercept of the graph of Then graph the equation. The x-intercept is the value of x when Original equation Substitute 0 for y. Add 4 to each side. Divide each side by –2. The x-intercept is –2. The graph crosses the x-axis at (–2, 0). Likewise, the y-intercept is the value of y when Original equation Substitute 0 for x. Add 4 to each side. The y-intercept is 4. The graph crosses the y-axis at (0, 4). Use the ordered pairs to graph this equation. Answer: The x-intercept is –2, and the y-intercept is 4. (0, 4) (–2, 0) Find the x-intercept and the y-intercept of the graph of Then graph the equation. Answer: The x-intercept is –2, and the y-intercept is 6. Try These Find the x-intercept and y-intercept of the graph of each equation. Then graph the equation. 2x – 6y = 12 y = 4x – 2 Try These Find the x-intercept and y-intercept of the graph of each equation. Then graph the equation. 2x – 6y = 12 x-intercept: 6 y-intercept: -2 y = 4x – 2 x-intercept: 1/2 y-intercept: -2 Assignment: Page 66-67 #42, 53, 54, 55 Example 1 Find Slope Example 2 Use Slope to Graph a Line Example 3 Rate of Change Example 4 Parallel Lines Example 5 Perpendicular Line Slope of a Line • The slope of a line measures the steepness of the line. Most of you are probably familiar with associating slope with "rise over run". • Rise means how many units you move up or down from point to point. On the graph that would be a change in the y values. Run means how far left or right you move from point to point. On the graph, that would mean a change of x values. Positive Slope • Here are some visuals to help you with this definition: The slope of this line is 2/3. Negative Slope • Here is a graph of a line with a negative slope. The slope here is –2/1. Formula for Calculating Slope of a Line • To calculate the slope of a line given two points on that line you can use the formula: Find the slope of the line that passes through (1, 3) and (–2, –3). Then graph the line. Slope formula and Simplify. Graph the two ordered pairs and draw the line. Use the slope to check your graph by selecting any point on the line. Then go up 2 units and right 1 unit or go down 2 units and left 1 unit. This point should also be on the line. Answer: The slope of the line is 2. (1, 3) (–2, –3) Find the slope of the line that passes through (2, 3) and (–1, 5). Then graph the line. Answer: The slope of the line is Try These Find the slope of the line that passes through each pair of points. (6, 8), (5, -5) (-2, -3), (0, -5) (4, -1.5), (4, 4.5) 1 2 51 ( , ), ( ) 2 3 6, 4 Try These Find the slope of the line that passes through each pair of points. (6, 8), (5, -5) Slope = 13 (-2, -3), (0, -5) Slope = -1 (4, -1.5), (4, 4.5) 1 2 51 ( , ), ( ) 2 3 6, 4 Slope is undefined Slope = -5/4 Graph the line passing through (1, –3) with a slope of Graph the ordered pair (1, –3). Then, according to the slope, go down 3 units and right 4 units. Plot the new point at (5, –6). Draw the line containing the points. (1, –3) (5, –6) Graph the line passing through (2, 5) with a slope of –3. Answer: Try These Graph the line passing through the given point with the given slope. (-3, -1), m = -1/5 (3, -4), m = 2 (2, 2), m = 0 Try These Graph the line passing through the given point with the given slope. (-3, -1), m = -1/5 (3, -4), m = 2 (2, 2), m = 0 Communication Refer to the graph. Find the rate of change of the number of radio stations on the air in the United States from 1990 to 1998. Slope formula Substitute. Simplify. Answer: Between 1990 and 1998, the number of radio stations on the air in the United States increased at an average rate of 0.225(1000) or 225 stations per year. Computers Refer to the graph. Find the rate of change of the number of households with computers in the United States from 1984 to 1998. Answer: The rate of change is 2.9 million households per year. Slopes of Parallel Lines • Parallel lines have the same slopes. This is because the are going in the same direction. They do, however, have different yintercepts since they do not hit the y-axis at the same place. Slopes of Perpendicular Lines • Perpendicular lines have opposite reciprocal slopes. For example, 2/3 and –3/2. • The graph at the right shows a pair of perpendicular liens whose slopes are 1/1 and –1/1. Graph the line through (1, –2) that is parallel to the line with the equation The x-intercept is –2 and the y-intercept is 2. Use the intercepts to graph The line rises 1 unit for every 1 unit it moves to the right, so the slope is 1. Now, use the slope and the point at (1, –2) to graph the line parallel to (2, –1) (1, –2) Graph the line through (2, 3) that is parallel to the line with the equation Answer: Graph the line through (2, 1) that is perpendicular to the line with the equation The x-intercept is or 1.5 and the y-intercept is –1. Use the intercepts to graph 2x – 3y = 3 The line rises 1 unit for every 1.5 units it moves to the right, so the slope is or Graph the line through (2, 1) that is perpendicular to the line with the equation The slope of the line perpendicular is the opposite reciprocal of or Start at (2, 1) and go down 3 units and right 2 units. Use this point and (2, 1) to graph the line. (2, 1) 2x – 3y = 3 (4, –2) Graph the line through (–3, 1) that is perpendicular to the line with the equation Answer: Try These Graph the line that satisfies each set of conditions. Passes through (2, -2) and is parallel to a line whose slope is –1. Passes through (3, 0) and is perpendicular to a line whose slope is ¾. Passes through the origin and is parallel to the graph of x + y = 10 Try These Graph the line that satisfies each set of conditions. Passes through (2, -2) and is parallel to a line whose slope is –1. Passes through (3, 0) and is perpendicular to a line whose slope is ¾. Passes through the origin and is parallel to the graph of x + y = 10 Assignment: Page 72-73 #18, 34, 44, 46