Download Analog VLSI Design - University of Hartford

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Power engineering wikipedia , lookup

Transmission line loudspeaker wikipedia , lookup

Alternating current wikipedia , lookup

Microprocessor wikipedia , lookup

Opto-isolator wikipedia , lookup

Electronic engineering wikipedia , lookup

CMOS wikipedia , lookup

Transcript
Analog VLSI Design
Technology Trends
3 Crises in VLSI Design
Power Crises
VLSI - Ever Increasing Power
Trends in Power, VDD and Current
Power/Delay Trade-Off
Leaky Transistors
3 Strategies for Low Power
Low Power Strategies
Interconnect
Interconnect Trends
Interconnect
Trends
Design Issues
Coupled Noise
Complexity
Which Way Forward?
Future Chips 2014
Challenge
ANALOG VLSI DESIGN
Principles, Techniques, Building Blocks
Is Analog VLSI Design Dead?





No, not true!
Total analog chip sales for 2002 $39 billion, 2004 ~ $48billion
10% increase over previous year, growth predicted for next 3 years
Raw transducer output in most systems is analog in nature
Although very small %age of total chip area is analog, still a
need for good design practice since analog component may be the
limiting factor on overall system performance
 Days of pure analog design are over, majority of systems are integrated
with increased functionality in digital domain
 Will attempt to introduce some hierarchy - use building block approach
as for digital
 Bottom Line: Ability to design both analog and digital circuits and
understand interactions between the 2 domains adds dimension to
your design portfolio
Analog Building Blocks
 Basic Blocks include
Current Sources
Current Mirrors
Single Stage Amplifiers
Differential Amplifiers & Op Amps
Comparators
Voltage References
Data Converters
Switched Capacitor Circuits
CMOS Technology




MOS Market dominates worldwide chip sales (>75%)
Total MOS sales 2003/2004 ~ $250 billion
Illustrates strength of CMOS technology - feature sizes now < 0.1um
True system-level integration on a chip i.e. converters, filters, dsp
processors, microcontroller cores, memory all reside on one die
 >180 million transistors/chip
 Decreases in feature size cause some complexities:
Layout issues more important
Modeling is a key issue
Parasitic effects significant
Power dissipation issues challenging (BiCMOS, VDD-hopping, etc)
Low Power + High Speed=BiCMOS
 Future of Gigascale Integration lies in BiCMOS technology
 Application Example : Wireless Communications - pagers,
cellular phones, laptops, palmtops
 Requirement for high speed low power front end challenge for
analog designers (cannot afford time and energy to digitize first)
Historical Roadmap: Bipolar/CMOS
•
•
•
•
•
•
•
1930’s – MOS invented, didn’t catch on, dormant for 30 yrs
1940’s- 50’s – Bipolars invented, became dominant thru the early 70’s
1970’s - Power consumption issues re-ignited interest in MOS
1980 MOS/Bipolar share of market 50/50 (largely due to CMOS)
1983 – BiCMOS invented
1990’s – CMOS dominant
2000’s - BiCMOS integrated into CMOS, Gigascale Integration
Improvement Trends






Functionality (e.g. non-volatility, smart power)
Integration Level (e.g. components per chip, Moore’s Law)
Compactness (e.g. components/sq cm)
Speed (e.g. microprocessor clock in MHZ)
Power (e.g. laptop or cellphone battery life)
Cost (e.g. cost per function, historically decreasing)
Available from scaling & tech improvements over last 30yrs
Future Trends: International Technology
Roadmap for Semiconductors (ITRS)
 S/C industry has become a global industry in the 90’s: manufacturers,
suppliers, alliances, world wide operations. Since 1992 Semiconductor
Industries Association (SIA) has produced a 15year outlook on major
trends in the s/c industry (ITRS)
 Technical challenges identified
 Solutions proposed (where possible)
 Traditional is reaching fundamental limits
 New materials must be introduced to further extend scaling limits
Way to go:
 System In a Package (SiP
 P-SoC (Performance System-on-a-Chip): integration of multiple silicon
technologies on a chip
 Nanotechnology
 Neuromorphic Systems - emulate natural signal processing (circuits
operating in subthreshold/weak inversion )
ITRS: Technology Working Groups (TWG’s)
Purpose: To provide guidance, host and edit workshop in following
areas
 Design
 Test
 Process Integration, Devices, Structures
 Front End Processes
 Lithography
 Interconnect
 Factory Integration
 Assembly & Packaging
 Cross Cutting Working Groups in environment, safety, defect
reduction, metrology, modeling/simulation
ITRS: Example of Key Lithography-Related
Characteristics



Year
DRAM pitch
MPU Gate Length
99
180nm
140nm
2002
130nm
100nm
2004
110nm
70nm
2008
70nm
45nm
What is S-o-C (system on a chip)?
 S-o-C chips are often mixed-technology designs, including such
diverse combinations as embedded DRAM, high-performance or
low-power logic, analog, RF, esoteric technologies like MicroElectro Mechanical Systems (MEMS) , optical input/output.
 Time-to-market for particular application-specific capability is
key
 Product families will be developed around specific SoC
architectures and many SoC designs customized for target
markets by programming part (using software, FPGA, Flash,
and others).
 Category of SoC is referred to as a programmable platform. The
design tools and technologies needed to assemble, verify, and
program such embedded SoC’s will present a major challenge
over the next decade.
Interconnect Working Group
 Function of interconnect is to distribute clock and other signals and
to provide power/ground
 Requirement for interconnect is to meet the high-speed
transmission needs of chips despite further scaling of feature sizes.
 As supply voltage reduced, cross-talk an issue, near term solution
is use of thinner copper metallization to lower line-to-line
capacitance.
 Although copper-containing chips introduced in 1998, copper must
be combined with new insulator materials. Introduction of new low k
dielectrics, CVD metal/barrier/seed layers, and additional elements
for SoC, provide process integration challenges.
 Emerging system-in-a-package (SiP) and system-on-a-chip, or SoC
 For long term, material innovation with traditional scaling will no
longer satisfy performance requirements. New design or technology
solutions (such as coplanar waveguides, free space RF, optical
interconnect) will be needed to overcome the performance
limitations of traditional interconnect.
Analog VLSI Design ECE567 Spr 2008
 Professor:
Dr. Abby Ilumoka, Room UT 235, Ph: (860) - 768 - 5231
 Email:
[email protected]
 Class Time: Mon 5.45pm – 8.15pm
 Office Hrs:
Tues Thur 10.50am – 12.10pm, Mon 4-5pm, Wed 11-11.30am
 Credits:
3 credits
 Objectives:
Course deals with design principles and techniques for high
performance analog IC’s implemented in CMOS technology. Although analog
design appears to be much less systematic than digital, course highlights good
design principles to simplify process.
Course Text & Materials:
1. Analog Integrated Circuit Design by Johns & Martin, Wiley 1997
2. CMOS Circuit design layout & Simulation by Baker, Li & Boyce, IEEE Press, 1998
3. Specified journal & conference papers
Grading Policy and Exam Dates:
4 Exams
- 4 X 25% = 100 %
Laboratory/ Design Assignments (bonus max 10%)
TOTAL
100%
Spr 2008 Exam Dates: Exam 1 Mon Feb 18
Exam 2 Mon Mar 24
Exam 3 Mon Apr 21
Exam 4 Mon May 12
TOPICS
 1. Advanced MOS Modeling

- Short Channel Effects

- Sub-threshold Operation

- Leakage Currents
 2. Processing and Layout for CMOS Analog Circuits
 3. Fundamental Building Blocks of Analog IC’s

- MOS Current Mirrors

- Single Stage Amps

- SPICE Simulation Examples
 4. Design of the 2 stage CMOS Op Amp: Op Amp I
 5. Design of the 2 stage CMOS Op Amp: Op Amp II
6. Additional Analog Building Blocks
- Comparators

- Sample and Hold circuits

- Switched capacitor Circuits
 7. Data Converters A-D and D-A
 8. Design Refinement & Optimization Techniques
 9.Noise Analysis and Modeling