Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Lenntech [email protected] Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Description Liquid flow rate per each Filter cartridge Disposable pleated filter in a polypropylene shell Economical, no housing required Low filter extractables Compatitable with most chemical solvents Application For small volume point-of-use filtration Designed to filter a wide range of acids, bases and solvents Electronics : Photoresists, Wet chemical solvents, Coatings Pharmaceutical : Water, Bacteria, Vaccines Specification Hydrophilic PES Material Media : Hydrophobic / Hydrophilic PTFE / Hydrophilic PES / PP Support : Polypropylene Cage / core / end-caps / shell : Polypropylene Operating Condition Maximum pressure : 3.5 bar at 25 Removal Ratings( ) Hydrophobic PTFE 0.02, 0.05, 0.1, 0.2, 0.45, 1.0, 3.0, 10.0 Hydrophilic PTFE 0.05, 0.1, 0.2, 0.45, 1.0 Effective Area 0.1 Polypropylene ~ 0.18 (4 ) Dimension(unit : mm) Ordering Information Grade Type C : Capsule H : Pleated Media TF : Hydrop obic Support Material P: Polypropylene Micron Rating grade A2 : 0.02 A3 : 0.03 A5 : 0.05 01 : 0.1 02 : 0.2 04 : 0.45 10 : 1.0 30 : 3.0 50 : 5.0 11 : 10.0 22 : 20.0 33 : 30.0 CO : High clean 55 : 50.0 PTFE TI : Hydrophilic PTFE SI/SO : Hydrophilic PES HO : High Particle Holding PP PO : High performance PP PP grade End-cap Option X : Inlet / Outlet SW 1/4 Vent / Drain 1/4 W : Inlet / Outlet SW 3/8 Vent / Drain 1/4 V : Inlet / Outlet NPT 1/4 Vent / Drain 1/8 U : Inlet / Outlet Pillar 6mm Vent / Drain 4mm T : Inlet / Outlet Pillar 8mm Vent / Drain 4mm Length 4:4 O-ring Material C: DI cleaning & Vacuum V: Vacuum Packaging