* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download Document
Survey
Document related concepts
Transcript
Physics 7C lecture 03 Application of Newton’s laws: free body diagram Thursday October 3, 8:00 AM – 9:20 AM Engineering Hall 1200 Copyright © 2012 Pearson Education Inc. Newton’s laws • Newton’s First Law of Motion: when forces are balanced the object will keep its motion/velocity. • Newton’s Second Law of Motion: F = m a, force causes changes to the motion/velocity. • Newton’s Third Law of Motion: action-reaction pairs • Yet: The laws are simple to state but intricate in their application. • Let’s do some iClicker questions first. Copyright © 2012 Pearson Education Inc. Q4.1 An elevator is being lifted at a constant speed by a steel cable attached to an electric motor. There is no air resistance, nor is there any friction between the elevator and Cable the walls of the elevator shaft. The upward force exerted on the elevator by the cable is Motor v Elevator A. greater than the downward force of gravity. B. equal to the force of gravity. C. less than the force of gravity. D. any of the above, depending on the speed of the elevator. © 2012 Pearson Education, Inc. A4.1 An elevator is being lifted at a constant speed by a steel cable attached to an electric motor. There is no air resistance, nor is there any friction between the elevator and Cable the walls of the elevator shaft. The upward force exerted on the elevator by the cable is Motor v Elevator A. greater than the downward force of gravity. B. equal to the force of gravity. C. less than the force of gravity. D. any of the above, depending on the speed of the elevator. © 2012 Pearson Education, Inc. Q4.2 An elevator is being lowered at a constant speed by a steel cable attached to an electric motor. There is no air resistance, nor is there any friction between the elevator and Cable the walls of the elevator shaft. The upward force exerted on the elevator by the cable is Motor v Elevator A. greater than the downward force of gravity. B. equal to the force of gravity. C. less than the force of gravity. D. any of the above, depending on the speed of the elevator. © 2012 Pearson Education, Inc. A4.2 An elevator is being lowered at a constant speed by a steel cable attached to an electric motor. There is no air resistance, nor is there any friction between the elevator and Cable the walls of the elevator shaft. The upward force exerted on the elevator by the cable is Motor v Elevator A. greater than the downward force of gravity. B. equal to the force of gravity. C. less than the force of gravity. D. any of the above, depending on the speed of the elevator. © 2012 Pearson Education, Inc. Q4.5 A lightweight crate (A) and a heavy crate (B) are side-by-side on a F horizontal floor. You apply a horizontal force F to crate A. There is friction between the crates and the floor. If the two crates are accelerating to the right, A B A. crate A exerts more force on crate B than B exerts on A B. crate A exerts less force on crate B than B exerts on A C. crate A exerts as much force on crate B as B exerts on A D. Answer depends on the details of the friction force © 2012 Pearson Education, Inc. A4.5 A lightweight crate (A) and a heavy crate (B) are side-by-side on a F horizontal floor. You apply a horizontal force F to crate A. There is friction between the crates and the floor. If the two crates are accelerating to the right, A B A. crate A exerts more force on crate B than B exerts on A B. crate A exerts less force on crate B than B exerts on A C. crate A exerts as much force on crate B as B exerts on A D. Answer depends on the details of the friction force © 2012 Pearson Education, Inc. Q4.6 An elevator is being lowered at constant speed by a steel cable attached to an electric motor. There is no air resistance, nor is Cable there any friction between the elevator and the walls of the elevator shaft. The upward force exerted on the elevator by the cable has the same magnitude as the force of gravity on the elevator, but points in the opposite direction. Why? A. Newton’s first law B. Newton’s second law C. Newton’s third law © 2012 Pearson Education, Inc. Motor v Elevator A4.6 An elevator is being lowered at constant speed by a steel cable attached to an electric motor. There is no air resistance, nor is Cable there any friction between the elevator and the walls of the elevator shaft. The upward force exerted on the elevator by the cable has the same magnitude as the force of gravity on the elevator, but points in the opposite direction. Why? A. Newton’s first law B. Newton’s second law C. Newton’s third law © 2012 Pearson Education, Inc. Motor v Elevator Q4.3 vx The graph to the right shows the velocity of an object as a function of time. Which of the graphs below best shows the net force versus time for this object? Fx Fx t 0 A. © 2012 Pearson Education, Inc. Fx t 0 B. t 0 Fx t 0 C. Fx t 0 D. t 0 E. A4.3 vx The graph to the right shows the velocity of an object as a function of time. Which of the graphs below best shows the net force versus time for this object? Fx Fx t 0 A. © 2012 Pearson Education, Inc. Fx t 0 B. t 0 Fx t 0 C. Fx t 0 D. t 0 E. Free-body diagrams • A free-body diagram is a sketch showing all the forces acting on an object. • Why do we need it? What is the tension force in the rope? Copyright © 2012 Pearson Education Inc. Free-body diagrams • We need to isolate the objects and study the forces on each of them. T1 T2 W1 T1 W2 T2 W3 Note: W = m g action-reaction pairs Copyright © 2012 Pearson Education Inc. Free-body diagrams • We can apply the 2nd law to each of the following, or to the group. T1 T2 W1 T1 W2 W3 T2 The three objects share the same acceleration: a = (F-W1-W2-W3) / (m1+m2+m3) = F/(m1+m2+m3) – g = 200/(6+4+5) – 9.8 = 3.53 m/s2 Copyright © 2012 Pearson Education Inc. Free-body diagrams • Now we focus on m1 and solve for tension T1. for the upper mass, apply the 2nd law: F-W1-T1 = m1 a we have: W1 T1 Copyright © 2012 Pearson Education Inc. T1 = F-W1-m1 a = 200-6*9.8-6*3.53 = 120.02 N Free-body diagrams • Similarly we focus on the rope and solve for tension T2. T1-W2-T2 = m2 a we have: T1 T2 = T1-W2-m2 a = 120.02-4*9.8-4*3.53 W2 = 66.7 N T2 Copyright © 2012 Pearson Education Inc. Free-body diagrams • We can double check the result on the lower mass: T2 T2-W3 = m3 a we have calculated: T2 = 66.7 N a = 3.53 m/s2 66.7 – 5*9.8 = 5 * 3.53 true! Copyright © 2012 Pearson Education Inc. W3 ? Free-body diagrams—examples • A free-body diagram is a sketch showing all the forces acting on an object. Copyright © 2012 Pearson Education Inc. Free-body diagrams—examples • A free-body diagram is a sketch showing all the forces acting on an object. Copyright © 2012 Pearson Education Inc. Free-body diagrams—examples Copyright © 2012 Pearson Education Inc. Q4.9 A person pulls horizontally on block B, causing both blocks to move horizontally as a unit. There is friction between block B and the horizontal table. If the two blocks are moving to the right at constant velocity, A. the horizontal force that B exerts on A points to the left. B. the horizontal force that B exerts on A points to the right. C. B exerts no horizontal force on A. D. not enough information given to decide © 2012 Pearson Education, Inc. A4.9 A person pulls horizontally on block B, causing both blocks to move horizontally as a unit. There is friction between block B and the horizontal table. If the two blocks are moving to the right at constant velocity, A. the horizontal force that B exerts on A points to the left. B. the horizontal force that B exerts on A points to the right. C. B exerts no horizontal force on A. D. not enough information given to decide © 2012 Pearson Education, Inc. Q4.12 A woman pulls on a 6.00kg crate, which in turn is connected to a 4.00-kg crate by a light rope. The light rope remains taut. Compared to the 6.00-kg crate, the lighter 4.00-kg crate A. is subjected to the same net force and has the same acceleration. B. is subjected to a smaller net force and has the same acceleration. C. is subjected to the same net force and has a smaller acceleration. D. is subjected to a smaller net force and has a smaller acceleration. E. none of the above © 2012 Pearson Education, Inc. A4.12 A woman pulls on a 6.00kg crate, which in turn is connected to a 4.00-kg crate by a light rope. The light rope remains taut. Compared to the 6.00-kg crate, the lighter 4.00-kg crate A. is subjected to the same net force and has the same acceleration. B. is subjected to a smaller net force and has the same acceleration. C. is subjected to the same net force and has a smaller acceleration. D. is subjected to a smaller net force and has a smaller acceleration. E. none of the above © 2012 Pearson Education, Inc. Q5.1 A car engine is suspended from a chain linked at O to two other chains. Which of the following forces should be included in the free-body diagram for the engine? A. tension T1 B. tension T2 C. tension T3 D. two of the above E. T1, T2, and T3 © 2012 Pearson Education, Inc. A5.1 A car engine is suspended from a chain linked at O to two other chains. Which of the following forces should be included in the free-body diagram for the engine? A. tension T1 B. tension T2 C. tension T3 D. two of the above E. T1, T2, and T3 © 2012 Pearson Education, Inc. Two-dimensional equilibrium • A car engine hangs from several chains. Copyright © 2012 Pearson Education Inc. Two-dimensional equilibrium • A car engine hangs from several chains. Copyright © 2012 Pearson Education Inc. Q5.3 A cart (weight w1) is attached by a lightweight cable to a bucket (weight w2) as shown. The ramp is frictionless. When released, the cart accelerates up the ramp. Which of the following is a correct free-body diagram for the cart? n n n n T T T T w1 A. © 2012 Pearson Education, Inc. w1 B. w1 m1a C. w1 m1a D. A5.3 A cart (weight w1) is attached by a lightweight cable to a bucket (weight w2) as shown. The ramp is frictionless. When released, the cart accelerates up the ramp. Which of the following is a correct free-body diagram for the cart? n n n n T T T T w1 A. © 2012 Pearson Education, Inc. w1 B. w1 m1a C. w1 m1a D. Q5.4 A cart (weight w1) is attached by a lightweight cable to a bucket (weight w2) as shown. The ramp is frictionless. The pulley is frictionless and does not rotate. When released, the cart accelerates up the ramp and the bucket accelerates downward. How does the cable tension T compare to w2? A. T = w2 B. T > w2 C. T < w2 D. not enough information given to decide © 2012 Pearson Education, Inc. A5.4 A cart (weight w1) is attached by a lightweight cable to a bucket (weight w2) as shown. The ramp is frictionless. The pulley is frictionless and does not rotate. When released, the cart accelerates up the ramp and the bucket accelerates downward. How does the cable tension T compare to w2? A. T = w2 B. T > w2 C. T < w2 D. not enough information given to decide © 2012 Pearson Education, Inc. Bodies connected by a cable and pulley • If the cart is moving at constant speed, what is w2/w1? Copyright © 2012 Pearson Education Inc. Bodies connected by a cable and pulley • If the cart is moving at constant speed, what is w2/w1? consider the bucket T = w2 Copyright © 2012 Pearson Education Inc. Bodies connected by a cable and pulley • If the cart is moving at constant speed, what is w2/w1? consider the cart along x direction: W1 Sin 15o – T = 0 Thus: W2 = W1 Sin 15o and: W2/W1 = Sin 15o = 0.26 Copyright © 2012 Pearson Education Inc.