* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download 05-Fluids - Andrews University
		                    
		                    
								Survey							
                            
		                
		                
                            
                            
								Document related concepts							
                        
                        
                    
						
						
							Transcript						
					
					Physics Unit 5  This Slideshow was developed to accompany the textbook  OpenStax Physics Available for free at https://openstaxcollege.org/textbooks/collegephysics  By OpenStax College and Rice University  2013 edition  Some examples and diagrams are taken from the textbook. Slides created by Richard Wright, Andrews Academy [email protected]  Phases of Matter  Solid  Atoms in close contact so they can’t move much  Set volume and shape  Can’t compress  Liquid  Atoms move past each other  Set volume  Takes shape of container  Hard to compress  Gas  Atoms far apart  Neither set volume or shape  Compressible  Fluids  Flow  Both liquids and gases  Density 𝜌 = 𝑚 𝑉 Where 𝜌 = density m = mass V = Volume  Things with small density float on things with more density  Solids most dense  Gases least dense See Table 11.1  Can use density to determine unknown material  An ornate silver crown is thought to be fake. How could we determine if is silver without damaging the crown?  Find its mass using a balance. (It is 1.25 kg)  Find its volume by submerging in water and finding volume of displaces water. (It is 1.60 × 10−4 m3)  Find the density  𝜌 = 7.81 × 103 kg/m3  Table 11.1 says it is steel  Silver’s density is 10.5 × 103 kg/m3  Don’t be dense, you can solve these problems  11P1-7  Read 11.3, 11.4  11CQ8, 9, 11, 13, 14, 16, 17  Answers:  1) 1.610 cm3       2) 2.54 L 3) 2.58 g 4) 2.70 g/cm3 5) 3.99 cm 6) 0.163 m 7) 2.86 times denser  The molecules in a fluid are free to wander around  In their wanderings they sometimes collide with the sides of their container (i.e. balloon)  The more the molecules collide with the walls, the more force is felt 𝐹 𝑃= 𝐴 P = Pressure F = Force perpendicular to surface A = Area of surface  Unit: N/m2 = Pa (pascal) 1 Pa is very small so we usually use kPa or atm  In a fluid the pressure is exerted perpendicularly to all surfaces  A static fluid cannot produce a force parallel to a surface since it is not moving parallel to surface  You are drinking a juice box. In the process you suck all the juice and air out of the box. The top of the box is 7.5 cm by 5 cm. If the air pressure is 1.013 × 105 Pa, how much force is acting on the top of the box?  380 N = 85 lbs  Would the force of the side of the box be more or less than the top?  More because more area  The force that squashes the juice box is from the weight of all the air above it  Atmospheric Pressure at Sea Level 1.013 × 105 Pa = 1 atmosphere (1 atm)  The column of static fluid experiences several vertical forces  Since the fluid is not moving, it is in equilibrium and ∑𝐹 = 0   ∑𝐹 = 𝑃2 𝐴 − 𝑃1 𝐴 − 𝑚𝑔 = 0 𝑃2 𝐴 = 𝑃1 𝐴 + 𝑚𝑔  𝜌=  𝑃2 𝐴 = 𝑃1 𝐴 + 𝜌𝑉𝑔   𝑉 = 𝐴ℎ 𝑃2 𝐴 = 𝑃1 𝐴 + 𝜌𝑔𝐴ℎ   𝑃2 = 𝑃1 + 𝜌𝑔ℎ Or 𝑃 = 𝜌𝑔ℎ where P is the pressure due to the fluid at a depth h below the surface 𝑚 𝑉 → 𝑚 = 𝜌𝑉  If the pressure is known at a depth, the pressure lower down can be found by adding ρgh  This assumes ρ is constant with depth  This is a good estimate for liquids, but not for gasses unless h is small  Would Hoover Dam need to be just as strong if the entire lake behind the dam was reduced to an inch of water behind the dam, but the same depth as the lake?  Yes, the pressure depends only on the depth  What is the total pressure at points A and B?  1.55x105 Pa  Yes, there is a lot of pressure riding on this assignment  11P11-17, 20, 22  Read 11.5, 11.6  11CQ24-27  Answers:  11) 3.59 × 106 Pa         12) 7.80 × 104 Pa 13) 2.36 × 103 N 14) 0.760 m 15) 1.10 × 108 Pa 16) Show work 17) 30.6 m 20) 1.09 × 103 Pa 22) 24.0 N  Pascal’s Principle  A change in pressure applied to an enclosed fluid is transmitted undiminished to all portions of the fluid and the walls of its container.  Basis of hydraulics 𝐹  Since 𝑃 = , if we change the 𝐴 area, the force is changed  How much force must be exerted at A to support the 850-kg car at B? The piston at A has a diameter of 17 mm and the piston at B a diameter of 300 mm.  F = 26.7 N A B  Gauge Pressure Used by pressure gauges Measures pressure relative to atmospheric pressure  Absolute Pressure Sum of gauge pressure and atmospheric pressure 𝑃𝑎𝑏𝑠 = 𝑃𝑔𝑎𝑢𝑔𝑒 + 𝑃𝑎𝑡𝑚  Open-Tube Manometer U-shaped tube with fluid in it One end is connected to the container of which we want to measure the pressure The other end is open to the air 𝑃2 = 𝑃𝑎𝑏𝑠 𝑃2 = 𝜌𝑔ℎ + 𝑃𝑎𝑡𝑚 𝑃2 − 𝑃𝑎𝑡𝑚 = 𝑃𝑔𝑎𝑢𝑔𝑒  Barometer  Used to measure air pressure  A tube with the top sealed and filled with mercury  The bottom is open and sitting in a pool of mercury  Pressure at top = 0  Pressure at bottom = 𝑃𝑎𝑡𝑚  𝑃 = 𝜌𝑔ℎ  Let me pressure you into solving these problems  11P24-27, 30-34  Read 11.7  11CQ28-31      Answers:  24) 2.55 × 107 Pa, 251 atm     25) 136 N 26) 5.76 × 103 N 27) 100:1, 10:1, 1:100 30) 1.60 × 104 Pa, 1.07 × 104 Pa 31) 4.08 m 32) 1.49 × 106 N 33) 159 / 119 34) 3.99 × 104 N  Think of trying to push a beach ball under water  The water pushes it up  All fluids push things up because the pressure is higher at greater depths  The upward force is buoyant force   𝐹𝐵 = 𝑃2 𝐴 − 𝑃1 𝐴 𝐹𝐵 = 𝑃2 − 𝑃1 𝐴  𝑃2 = 𝑃1 + 𝜌𝑔ℎ  𝑃2 − 𝑃1 = 𝜌𝑔ℎ  𝐹𝐵 = 𝜌𝑔ℎ 𝐴  𝜌=   𝑉 = 𝐴ℎ 𝑚 = 𝜌ℎ𝐴 𝑚 𝑉  𝑚 = 𝜌𝑉  𝐹𝐵 = 𝑚𝑔 = 𝑊𝑙𝑖𝑞𝑢𝑖𝑑  Archimedes’ Principle Buoyant force = weight of the displaced fluid 𝐹𝐵 = 𝑊𝑓𝑙  If buoyant force ≥ gravity, then it floats  If buoyant force < gravity, then it sinks  An ice cube is floating in a glass of fresh water. The cube is 3 cm on each side. If the cube is floating so a flat face is facing up, what is the distance between the top of the cube and the water? h  0.002 m x  As you might have guessed An object will float if its average density < density of the fluid In other words, it will float if it displaces more fluid than its own weight  Specific Gravity 𝑠𝑝𝑒𝑐𝑖𝑓𝑖𝑐 𝑔𝑟𝑎𝑣𝑖𝑡𝑦 = 𝜌 𝜌𝑓𝑙 = fraction submerged If specific gravity < 1 it floats If specific gravity > 1 it sinks  A man tied a bunch of helium balloons to a lawn chair and flew to a great altitude. If a single balloon is estimated as a sphere with a radius of 20 cm and is filled with helium, what is the net force on one balloon? 0.3648 N  How many balloons would be required to lift a 80 kg man and chair? 2150 balloons  Be buoyed up the thought of the joy derived from solving these problems  11P 37-42, 44, 51  Read 11.8, 11.9  11CQ33-38  Answers:  37) 800 kg/m3 38) 815 kg/m3 39) 99.5%, 96.9% 40) 41.4 g, 41.4 cm3, 1.09 g/cm3 41) 198 g, 198 cm3, 2.73 g/cm3 42) 39.5 g, 50 cm3, 0.79 g/cm3, ethyl alcohol  44) 8.21 N  51) 2920 N       Cohesive Forces Forces between molecules of same type Holding water together in cup  Adhesive Forces Forces between molecules of different type Water drops sticking to grass  Surface Tension  Cohesive forces at surface of a liquid cause it to have smallest surface area possible  Why drops are round  Sort of like membrane on top of fluid  Proportional to cohesive force which varies by fluid 𝛾 = 𝐹 𝐿 𝛾 = surface tension F = force L = length on the surface the force is applied  Gauge pressure inside spherical bubble Inward surface tension causes pressure inside a bubble to be higher than atmospheric pressure 𝑃 = 4𝛾 𝑟  Interaction of cohesion and adhesion  A drop of water on a surface Cohesion wants to make a spherical drop Adhesion wants to spread out and stick to surface  Contact angle Indicates which force is stronger  Capillary Action  Tendency of a fluid to be drawn up a narrow, capillary, tube  If contact angle is < 90°, then fluid raised up tube  As the fluid touches the sides of tube, adhesive forces pull fluid up, cohesive forces pull the center up, but not as much  The curved part is called meniscus  Height that capillary action can lift fluid ℎ = 2𝛾 cos 𝜃 𝜌𝑔𝑟 𝛾 = surface tension 𝜌 = density of fluid 𝑔 = acceleration of gravity 𝑟 = radius of tube  Calculate the gauge pressure inside two soap bubbles with radii of 3 cm and 1 cm. 3 cm: 4.93 Pa 1 cm: 14.8 Pa  That’s why it’s harder to blow up a small balloon than a big balloon.     Stick with it, you can do well 11P54-59, 62-63, 68-69, 73-74, 77 Read 12.1, 12.2 12CQ1-5, 9-12, 14      Answers: 54) 592 N/m2 55) 0.0700 N/m, water at 40°C 56) 2.23 × 10−2 mmHg 57) 1.56 × 10−3 N  58) 1.65 × 10−3 m, 3.71 × 10−4 m  59) 0.566 m  62) 14.6 N/m2, 4.46 N/m2, 7.40 N/m2, Alcohol  63) -1.46 cm, 0 cm  68) 479 N  69) 5.00 × 108 Pa  73) 3.81 × 103 N/m2, 28.7 mmHg  74) 27.1 cm  77) 3.98 × 106 Pa, 2.1 × 10−3 cm  Flow Rate 𝑄 = 𝑉 𝑡 Q = Flow rate V = Volume of fluid t = time  𝑄= 𝑉 𝑡 = 𝐴𝑑 𝑡 = 𝐴𝑣  A = cross-section area  𝑣 = average velocity of fluid  Since flow rate is constant for a given moving fluid  Equation of continuity 𝜌1 𝐴1 𝑣1 = 𝜌2 𝐴2 𝑣2  If incompressible 𝐴1 𝑣1 = 𝐴2 𝑣2  If incompressible and several branches 𝑛1 𝐴1 𝑣1 = 𝑛2 𝐴2 𝑣2  Where does the water flow the fastest? A B C  A garden hose has a diameter of 2 cm and water enters it at 0.5 m/s. You block 90% of the end of the hose with your thumb. How fast does the water exit the hose?  v = 5 m/s  When a fluid goes through narrower channel, it speeds up  It increases kinetic energy  𝑊𝑛𝑒𝑡 = 1 𝑚𝑣 2 2 − 1 𝑚𝑣02 2  Net work comes from pressure pushing the fluid  Derivation  𝑊𝑛𝑒𝑡 = 𝐸𝑓 − 𝐸0  𝐸 = 𝐾𝐸 + 𝑃𝐸 1 = 𝑚𝑣 2 + 𝑚𝑔ℎ 2  𝑊𝑛𝑒𝑡 = 𝐹 ⋅ 𝑥  𝑃= 𝐹 𝐴 → 𝐹 = 𝑃𝐴 → 𝐹𝑥 = 𝑃𝑉  𝑊𝑛𝑒𝑡 = 𝑃2 − 𝑃1 𝑉 𝑊𝑛𝑒𝑡 = 𝑃2 − 𝑃1 𝑉 = 1 𝑚𝑣12 2  Divide by V and rearrange 𝜌 = + 𝑚𝑔ℎ1 − 1 𝑚𝑣22 2 + 𝑚𝑔ℎ2 𝑚 𝑉  Bernoulli’s Equation 1 2 1 2 𝑃1 + 𝜌𝑣1 + 𝜌𝑔ℎ1 = 𝑃2 + 𝜌𝑣2 + 𝜌𝑔ℎ2 2 2  Think about driving down a road with something in your car trunk. The object is too large to completely shut the trunk lid. While the car is stopped, the lid quietly rests as far down as it can go. As you drive down the road, why does the trunk open?  The air in the trunk is still. The air above the trunk is moving.  The air in the trunk is at a higher pressure than above the trunk. So the trunk is pushed open.  Demo:  Fold paper into a tunnel and blow through it.  What happens and why?  Why is an aneurysm (enlarged region of a blood vessel) bad for you?  As the blood enters the enlarged region, it slows.  The slower blood has a higher pressure, and pop!  Why do all houses need a plumbing vent?  Waste water flows through a sewer line.  Something like a sink is connected to the line, but there is a water trap to keep the sewer gasses from entering the house.  The flowing water in the sewer means the air directly above the flowing water has a lower pressure than the air above the sink.  This pushes the water in the trap down the pipe and sewer gasses enter the house  How do airplane wings work (even paper airplanes)?  The top of the wing is curved and the bottom is not. The air flows faster over the top of the wing, than the bottom. This pushes the wing up.  How does a curve ball in baseball work?  The faster you work, the less pressure you’ll feel?  12P2-6, 8, 11, 20-23  Read 12.3  12CQ18-21  Answers:  2) 83.3 cm3/s, 8.33 × 10−5 m3/s  3) 27 cm/s          4) 5.03 cm3/s, 151 cm3 5) 0.75 m/s, 0.13 m/s 6) 0.139𝑣1 8) 0.166 cm/s 11) 12.6 m/s, 0.0800 m3/s 20) 33.1 m, 19.6 cm 21) 2.54 × 105 N 22) 15.3 N 23) 1.58 × 106 N/m2, 163 m  Previous examples of Bernoulli’s Equation had simplified conditions  Bernoulli’s Equation work in real world  Water circulates throughout a house in a hot-water heating system. If the water is pumped at a speed of 0.50 m/s through a 4.0-cm-diameter pipe in the basement under a pressure of 3.0 atm, what will be the flow speed and pressure in a 2.6-cm-diameter pipe on the second floor 5.0 m above? Assume the pipes do not divide into branches.  𝑣2 = 1.2 𝑚 𝑠  𝑃2 = 2.5 𝑎𝑡𝑚  The tank is open to the atmosphere at the top. Find an expression for the speed of the liquid leaving the pipe at the bottom.  𝑣1 = 2𝑔ℎ  Since Bernoulli’s Equation is conservation of energy, the water would rise up to the same height as the water in the tank.  Power in Fluid Flow  Power is rate of work or energy  Bernoulli’s Equation terms are in energy per volume  Multiply Bernoulli’s Equation by volume and divide by time Or multiply by flow rate Q  𝑃𝑜𝑤𝑒𝑟 = 𝑃 + 1 𝜌𝑣 2 2 +  Apply yourself to these applications  12P25-28  Read 12.4, 12.5  12CQ22-24, 26-28  Answers:  25) 9.56 × 108 W, 2.12  26) 71.8 m/s, 257 m/s  27) 1.26 W  28) 2.76 × 105 𝑃𝑎, 2.81 × 105 𝑃𝑎  Viscosity  Fluid friction Turbulent  Laminar Flow  Smooth flow in layers that don’t mix  Turbulent Flow  Has eddies and swirls that mix layers of fluid Laminar  How viscosity is measured Two plates with fluid between Top plate moved Friction causes the fluid to move 𝜂 = 𝐹𝐿 𝑣𝐴  Laminar flow in tubes  Difference in pressure causes fluids to flow 𝑃2 − 𝑃1 𝑄= 𝑅  Where  Q is flow rate  𝑃1 and 𝑃2 are pressures  R is resistance  Poiseuille’s law for resistance 8𝜂𝑙 𝑅= 4 𝜋𝑟  Where  𝜂 is viscosity  l is length of tube  r is radius of tube  Since flow rate depends on pressure If Q is high, the pressure must decrease like Bernoulli’s equation  If R is high, the pressure must decrease.  In blood vessels this is a problem with plaque on artery walls  How to tell if laminar or turbulent flow  Low speed with smooth, streamlined object  laminar  High speed or rough object  turbulent  Reynolds number  Below 2000  laminar  Above 3000  turbulent  Between 2000 and 3000 depends on conditions 2𝜌𝑣𝑟 𝑁𝑅 = 𝜂  A hypodermic syringe is filled with a solution whose viscosity is 1.5 × 10−3 Pa ⋅ s. The plunger area of the syringe is 8.0 × 10−5 m2 , and the length of the needle is 0.025 m. The internal radius of the needle is 4.0 × 10−4 m. The gauge pressure in a vein is 1900 Pa (14 mmHg). What force must be applied to the plunger, so that 1.0 × 10−6 m3 of solution can be injected in 3.0 s?  𝐹 = 0.25 N  Is the flow laminar if the density is 1000 kg/m3?  𝑁𝑅 = 4.44; Yes     Let the answers flow 12P30-33, 35-37, 51-54, 56 Read 12.6, 12.7 12CQ29-33      Answers: 30) 1.61 × 10−5 𝑁 31) 1.60 cm3/min 32) 0.0314 N, 0.471 mW 33) 8.7 × 10−2 𝑚𝑚3 /𝑠         35) 0.316𝑟1 36) 1.8𝑟1 37) 1.52, higher blood pressure 51) 1990 52) show work 53) 127000, 35100 54) 790000, 1690000 56) 3.16 × 10−4 𝑚3 /𝑠  If object move in fluid (or fluid moves past object)  Alternate form of Reynolds number 𝜌𝑣𝐿 ′ 𝑁𝑅 = 𝜂  𝑁𝑅′ < 1  laminar flow  1 < 𝑁𝑅′ < 10  transition, might have turbulent wake  10 < 𝑁𝑅′ < 106  either  𝑁𝑅′ > 106  turbulent  Viscous drag Force trying to stop object in fluid If 𝑁𝑅′ < 1, 𝐹𝑉 ∝ v If 10 < 𝑁𝑅′ < 106 , 𝐹𝑉 ∝ 𝑣2  Terminal velocity Objects falling in fluid Viscous drag will increase as speed increases Eventually drag force will = gravity force No acceleration  Diffusion Molecules in fluids move randomly They will travel some distance and then hit another molecule Average distance traveled 𝑥𝑟𝑚𝑠 = 2𝐷𝑡  How long will it take hemoglobin to move 1 mm in water by free diffusion (𝐷 = 6.9 × 10−11 𝑚2 /𝑠)?  t = 7246 s = 2 h  Diffusion Goes from high concentration to low Faster with higher difference of concentrations  Diffusion across Membranes Membranes are barriers They are semipermeable Some molecules can cross, but others can’t  Osmosis  Transport of water through membrane from differences in concentration  Dialysis  Transport of other molecules through membrane from differences in concentration  Reverse osmosis/reverse dialysis Sufficient pressure is applied to reverse normal direction of substance through membrane Can be used to purify a fluid Water pushed through a membrane that won’t let salt through  You cannot learn by osmosis since knowledge is not water, you must study  12P38-39, 62-64, 66  Answers:  38) 𝑣 = 2𝑅 2 𝑔 𝜌2 −𝜌1 9𝜂      39) 225 mPa⋅s 62) 1.41 mm 63) 130 64) 130 s 66) 0.391 s
 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
                                             
                                             
                                             
                                             
                                             
                                             
                                             
                                             
                                             
                                             
                                            