Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Water pollution wikipedia , lookup
Freshwater environmental quality parameters wikipedia , lookup
Sodium hydroxide wikipedia , lookup
California Green Chemistry Initiative wikipedia , lookup
Triclocarban wikipedia , lookup
Registration, Evaluation, Authorisation and Restriction of Chemicals wikipedia , lookup
Krystal Kleen Detail Safety Data Sheet according to REACH Regulation (EC) No. 1907/2006 Product: Brake Away Reference: A-102-MSDS Version: 1.1 Revision date: 15/05/13 Section 1: IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Identification of the substance or preparation Brake Away Use of the substance/preparation Non-Acid Wheel Cleaner Company/undertaking identification Krystal Kleen Detail Address Unit 3b Staplehurst Farm, Weston-On-The-Green, Oxford, OX25 3QU Telephone 07932-402424 Email [email protected] Emergency telephone Section 2: HAZARD IDENTIFICATION Corrosive Causes severe burns Section 3: COMPOSITION/INFORMATION ON INGREDIENTS Substances classified as dangerous according to Directive 67/548/EEC, if present (individually, or in combination) in concentrations exceeding those defined under 1907/2006. Name EC Number 215-185-5 203-905-0 CAS Number 1310-73-2 111-76-2 Content (% W/W) >5 1-25 Hazard Symbol(s) C Xn, Xi Sodium Hydroxide Butyl Glycol Alkyl ethoxy sulphate Ethylenediaminetetracetic acid sodium salt 200-573-9 68585-34-2 64-02-8 1-25 1-20 Xi Xn R-Phrase(s) R35 R20/21/22, R36/38 R38, R41 R22, R36 Additional substances, listed according to 648/2004. 0.1% or more but less Alkyl Amido Propyl Dimethylamine Betaine (61789-40-0) 1/6 Print date: 16/05/2013 This product is intended for professional use. Krystal Kleen Detail Safety Data Sheet according to REACH Regulation (EC) No. 1907/2006 Product: Brake Away Reference: A-102-MSDS Version: 1.1 Revision date: 15/05/13 than 1% Section 4: FIRST AID MEASURES ***** Speed is essential. Obtain immediate medical attention***** Inhalation If patient feels unwell, remove from exposure and keep warm and at rest. If symptoms persist, seek medical attention. Contact with skin Immediately remove contaminated clothing and wash the affected area with plenty of water. If redness/irritation develops/persists, seek medical attention. Contact with eyes Immediately irrigate with eyewash solution or clean water. Continue to irrigate until medical attention can be obtained. Ingestion Wash out mouth and dilute ingested chemicals with plenty of milk or water. Do not induce vomiting. Seek immediate medical attention. Section 5: FIRE FIGHTING MEASURES *****This product is not flammable***** Extinguishing media Water, foam, carbon dioxide, dry powder or water fog. Hazardous decomposition products No specific decomposition products are noted. Special fire fighting measures There is no specific risk resulting from toxic fumes derived from this product. However, it is advisable that fire-fighters wear self-contained positive pressure breathing apparatus and full, chemical proof, turnout gear. Section 6: ACCIDENTAL RELEASE MEASURES Personal precautions Suitable personal protection should be worn whilst dealing with spillage/accidental release. Refer to section 8 for further details. Environmental precautions Wash spillage area with water to dilute. Do not discharge into natural waters without pretreatment at a water waste/sewage/biological processing plant. Methods for cleaning up Small spills (<25L) May be washed down the drain with water Large spills (>25L) Should be contained with absorbent material and disposed of professionally. Section 7: HANDLING AND STORAGE 2/6 Print date: 16/05/2013 This product is intended for professional use. Krystal Kleen Detail Safety Data Sheet according to REACH Regulation (EC) No. 1907/2006 Product: Brake Away Reference: A-102-MSDS Version: 1.1 Revision date: 15/05/13 Handling Eye and skin protection should be worn at all times. At all times, observe good hygiene and working practices. Storage Store in original, closed containers and avoid sharp edges and other potential sources of puncture. Ensure product is stacked safely. Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION Short term (15 mins) 2 mg/m3 Long term (8 hour TWA) 123 mg/m3 Short term (15 mins) 246 mg/m3 Occupational exposure limits Sodium Hydroxide Butyl Glycol Hand/Eye/Skin Protection Hand, eye and skin protection should be worn at all times. In case of spillage, rubber boots and PVC suit should be worn. Respiratory Protection Not normally required due to low volatility. Section 9: PHYSICAL AND CHEMICAL PROPTERIES Colourless to Pale Yellow Liquid Slight solvent > 100 ˚C na > 13 (1% aqueous) ~ 1.1 Miscible with water in all proportions Appearance: Odour: Boiling point: Flash point: pH: Relative density: Solubility: Section 10: STABILITY AND REACTIVITY Stability Stable under normal conditions. Materials to avoid Acids. Ammonia. Ammonium salts. Alcohols. Peroxides. Halogenated solvents. Nitroalkanes. Acid anhydrides. Aluminium. Zinc. Tin. Magnesium. Aldehydes. Ketones. Unsaturated oils. Sugars. Phosphorous. Conditions to avoid Excessive heat and cold. Direct sunlight. Hazardous reaction products Attacks many metals liberating hydrogen gas. Section 11: TOXICOLOGICAL INFORMATION 3/6 Print date: 16/05/2013 This product is intended for professional use. Krystal Kleen Detail Safety Data Sheet according to REACH Regulation (EC) No. 1907/2006 Product: Brake Away Reference: A-102-MSDS Version: 1.1 Revision date: 15/05/13 Acute toxicity: Sodium Hydroxide - Estimated lowest lethal dose in man is 5g LD50 (oral, rat) 365mg/kg Inhalation: Low risk – not volatile. Prolonged inhalation of vapours may lead to irritation of respiratory pathways and other ill effects. Skin: High risk. Will cause irritation and redness followed by blistering and severe dermal damage. Eye: High risk. Will immediately cause severe irritation followed by ocular lesions with a high risk of permanent damage. Ingestion: High risk. Will immediately cause severe irritation of mouth, throat, oesophagus and stomach. If not immediately diluted with milk/water, severe internal damage and burns may be experienced. Section 12: ECOLOGICAL INFORMATION Ecotoxicity Concentrations greater than 100ppm, especially in fresh water, or with a pH value greater than 10.5, may be fatal to fish and other aquatic organisms. Can also damage aquatic plants and vegetation. Persistence and degradability Easy to eliminate. Biological degradability > 90% Bioaccumulative potential Does not bioaccumulate. Other adverse effects Effluent treatment: - Concentrations sufficient to render effluent alkaline may cause damage to effluent treatment organisms. Section 13: DISPOSAL CONSIDERATIONS Empty containers should be rinsed with water prior to disposal or recycling. Uncontaminated packaging may be returned and re-used. If necessary, quantities greater than 25 Litres/Kilograms should be treated by a professional disposal company. Section 14: TRANSPORT INFORMATION UN Number Proper shipping name Class Packing group Hazard identification number Other information 1824 SODIUM HYDROXIDE SOLUTION 8 II 80 4/6 Print date: 16/05/2013 This product is intended for professional use. Krystal Kleen Detail Safety Data Sheet according to REACH Regulation (EC) No. 1907/2006 Product: Brake Away Reference: A-102-MSDS Version: 1.1 Revision date: 15/05/13 Section 15: REGULATORY INFORMATION Hazard symbol(s) Corrosive Hazard determining component(s) Sodium Hydroxide R-phrase(s): R35 Causes severe burns. S-phrase(s): S1/2 S26 S27/28 S36/37/39 S45 Keep locked up and out of reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. After contact with skin, take off immediately all contaminated clothing and wash immediately with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. In case of accident, or if you feel unwell, seek medical advice immediately. (Where possible, show this label) Guiding information: This product is classified, labelled and packaged according to the Chemicals (Hazard Information and Packaging for Supply) Regulations (Northern Ireland) 2009 and to the Approved Classification and labelling Guide (Sixth Edition). Additional reference has also been made to EC Directive 67/548/EEC. The surfactant(s) contained in this preparation complies(comply) with the biodegradability criteria as laid down in Regulation (EC) No.648/2004 on detergents. Data to support this assertion are held at the disposal of the competent authorities of the Member States and will be made available to them, at their direct request or at the request of a detergent manufacturer. The information within this data sheet has been collated from EC regulation 790/2009 (amended 1272/2008), the CESIO recommendations for Anionic and Non-ionic surfactants (2006), the EH40/2005 Workplace Exposure limits, the Detergent Ingredients Database (DID-list, maintained by Ecolabelling Norway on behalf of the European Commission), CESIO recommendations for the classification and labelling of surfactants as “Dangerous for the Environment” and from ingredient safety data sheets. The data should be considered when making any assessment under the Control of Substance Hazardous to Health (COSHH) Regulations. Section 16: OTHER INFORMATION Full text of hazard symbols and R-phrases, if mentioned as hazardous components in section 3. C Xi Corrosive Irritant 5/6 Print date: 16/05/2013 This product is intended for professional use. Krystal Kleen Detail Safety Data Sheet according to REACH Regulation (EC) No. 1907/2006 Product: Brake Away Reference: A-102-MSDS Version: 1.1 Revision date: 15/05/13 Xn R22 R35 R20/21/22 R36 R36/38 R38 R41 Harmful Harmful if swallowed Causes severe burns Harmful by inhalation, in contact with skin and if swallowed Irritating to eyes. Irritating to eyes and skin. Irritating to skin Risk of serious damage to eyes PLEASE NOTE: the above risk phrases refer to the full strength ingredients, not to the formulated product. Revision history: Revision 1.1 Author CAH date 15/05/13 notes MSDS Created Checked If you have any queries relating to this MSDS, its contents or any other safety related questions, please write to: [email protected] The information contained herein is believed to be accurate and is given in good faith. No warranty or guarantee is implied. Recipients must take responsibility for observing existing laws and regulations. 6/6 Print date: 16/05/2013 This product is intended for professional use.