Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
College of Engineering Dept. of Electrical & Computer Engineering Final Program Exam Master of Science in Electrical Engineering General Information: Below are the complete study guides for each of the MS comprehensive exams. Please choose any one of the exams below. Please do not ask the ECE Department about additional information on the exam. Please note that: Exam Policies and Procedures: The exam is taken in a written form and has duration of 3 hours. The exam is administered two times per academic year (in fall and spring semesters). The exams are in a closed-book, closed-notes form with calculator allowed. For successful completion of MS EE requirements, students must pass the exam which includes the sections listed below. There is a maximum of three attempts. If the student does not pass the exam in three attempts, he/she will not be able to graduate with MS EE degree. (see Graduate Policy 1.6.5) The exam is developed with questions that will require a variety of approaches and methodologies, including design, analysis, and application. A student must be enrolled during the term the exam is taken or retaken in the case of a failed exam, else there is an examination fee. (see Graduate Policy 1.6.4) No notes or study materials are allowed. No cell phones allowed. Calculators allowed. Exam Knowledge Area(s): Electromagnetics Maxwell’s equations Boundary conditions Power and energy, Poynting’s theorem Time harmonic fields, wave equations and solutions Reflection and transmission Vector potential formulation Ideal dipole Antenna properties (radiation patterns, reciprocity, far-field vs. near-field, directivity, gain, impedance efficiency, polarization) 150 West University Boulevard, Melbourne, FL 32901-6975 • (321) 674-7132 • Fax: (321) 674-7136 Electronics The exam will cover basic introductory material related to the following topics: Solid-State Electronic and Devices, Analog IC Design, and Digital IC Design. For example: Microelectronic Circuit Design, Jaeger and Blalock, 4th Edition, McGraw Hill, ISBN 978-0-07-338045-2 Read and work the exercises and examples throughout, and the problems at the end of the chapters: Chapters 1-5 (Skip JFETs), Ch 13-14, Ch 6-8 You will need a calculator for the exam. Wireless Systems To properly prepare for the exam the students should study following material: ECE 5111 Radio Frequency Propagation Calculation with logarithmic units Propagation in free space Signal to nose ratio, noise figure and receiver sensitivity Propagation over a reflecting surface Log-distance path loss model Knife edge diffraction and effective antenna height Macroscopic propagation models (Lee model and Hata Okumura model) Small scale fading (Rayleigh fading, Ricean fading) Wideband channel characterization (Power delay profile and Coherence spectrum) Diversity reception Textbook: S. R. Sounders and A. A. Zavala, Antennas and Propagation for Wireless Communication Systems, 2nd Ed. Wiley, 2007. For other useful material check: http://research.fit.edu/wice/courses.php ECE Linear Systems 1 Signals and systems (Chapter 1) Time domain analysis of continuous-time systems (Chapter 2) Time domain analysis of discrete-time systems (Chapter 3) Continuous time signal analysis: the Fourier series (Chapter 6) Cont. time signal analysis: the Fourier transform (Chapter 7) Sampling; the bridge from continuous to discrete (Chapter 8) Textbook: B. P. Lathi, Linear Systems and Signals, 2nd ed., Oxford University Press, 2005 For other useful material check: http://research.fit.edu/wice/courses.php ECE 5234 Communication Theory Types of communication channels Fourier analysis of signals (Fourier series and transform) Amplitude modulation (DSB-SC, DSB-LC) Angle modulation (FM) Fundamental concepts in probability and statistics (PDF, CDF, moments, autocorrelation, power spectrum density, Wiener-Khinchin theorem, linear system and random process, stationarity and ergodicity) Performance of AM in AWGN Performance in FM in AWGN Textbook: John G. Proakis and Masoud Selehi, Communication Systems Engineering, 2nd edition, Prentice Hall Inc, 2002. For other useful material check: http://research.fit.edu/wice/courses.php ECE 5245 – Digital Signal Processing 1 Discrete-time signals and systems (Chapter 2) The Z-transform (Chapter 3) Sampling of continuous-time signals (Chapter 4) Transform analysis of linear time-invariant systems (Chapter 5) Structures for discrete-time systems (Chapter 6) Textbook: A. Oppenheim, et. al., Discrete-Time Signal Processing, 2nd ed., Prentice Hall, 1999. Photonics Study course material from: 1. Fiberoptic communication 2. Fiberoptic Sensors 3. Optical Electronics Exams will concentrate on general topics from those courses and include concepts, theory, and numerical problem solving. Systems and Information Processing The exam will cover basic introductory material related to the following topics: Z-transform, sampling, Transform Analysis of Linear Time-Invariant Systems. For example: A. V. Oppenheim, and R. W. Schafer, Discrete-time signal processing, 3rd ed, Prentice Hall:New Jersey (2010), ISBN 9780131988422 or http://ocw.mit.edu/resources/res-6-008-digital-signal-processing-spring-2011/study-materials/