Download Radio Plate Assembly Upgrade

Radio Plate Assembly Upgrade
IMPORTANT - READ THIS FIRST!
Read through this supplemental instruction sheet before
beginning with the main instruction manual.
The numbers included in each step replace the numbers
in the original Serpent 950R instruction manual. They
should be assembled, per the numerical order in the
manual. Next to the step number of each step is the bag
reference number which indicates which bag the parts for
the following steps are contained within.
Bag
53A, 55A
Step 4.1
Each step has lines and arrows pointing to the correct
placement of the parts as well as numbers showing the
order of assembly.
This instructional supplement covers the assembly of the
new laydown servo radio plate.
Please Note! Not all parts shown in this supplemental
instruction sheet come in the upgrade set.
1
E29
C5
2.5x8mm
E11
3x8mm
Ensure free movement of part
2
C5
E28
3x14mm
3
E29
3x20mm
Throttle Servo
Output gear of throttle servo must
be towards the REAR of car.
E28
E11
4
E28
E28
5
E28
E28
Steering Servo
Output gear of steering servo must be
towards the FRONT of car.
Step 4.2
Bag 54A
1
R4
The number on the servo arm corresponds
to the number of teeth.
23 - Sanwa / KO / JR
24 - Hitec
25 - Futaba
E10
3x6mm
E11
3x8mm
R4
4mm
Throttle Linkage
42.4mm
4
E10
3
7
E11
E10
1:1
Steering Linkage
46.5mm
6
E11
2
5
1:1
Step 4.3
G19
M4x10mm
1
G19
G19
3
G19
G19
2
Step 4.4
2
E13
E13
1
3x12mm
E13
Securely attach receiver to mounting plate.
Step 4.5
1
E11
3x8mm
5
5
H9
3x4mm
H9
2
Note. For clockwise circuits with mostly
right hand corners the fuel tank lid nipple should be placed on the right side of
the lid and the grubscrew on the opposite
side. The opposite is true for anti clockwise tracks with mostly left hand corners.
Important! Check that the fuel line and
pressure line are free from debris and not
blocked
4
3
E11
E11
#95771