Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Track Straight Line Voltage Applications: All Zumtobel Staff track systems are supplied ready for installation, come in 1- or 3-circuit and are field cuttable. Available for surface- mounted, pendant and recessed applications. Type: Available in our 3 standard finishes, white, black and satin aluminum (to match our titan track fixtures). Custom colors are also available. Size: 7/8" x 1 1/8" extruded aluminum Amps: 1 x 20 amps Rating: 120 volt 3-Circuit Track Size: 1 5/16" x 1 5/16" extruded aluminum Amps: 3 x 20 amps maximum (3∅ only) 1 1/8" 7/8" Track Profile UL C ® US LISTED Suitable for dry locations IBEW Union Made For electrical load, see National Electrical Code, Article 410, Paragraph 102. 1 5/16" 1. Material - Extruded .052" thick aluminum profile, available in exact 4, 8 and 12 foot lengths. Track is field cuttable. 2. Electrical - Flat, rectangular copper conductors guarantee positive contact every time. Polarization markings to ensure safe, secure installation. Extrusion profile is designed to maintain polarization integrity throughout the track system layout. 4' 8' 12' 58041WH 58081WH 58121WH 58041BK 58081BK 58121BK 58041SA 58081SA 58121SA 58041SP 58081SP 58121SP 4' 8' 12' 58043WH 58083WH 58123WH 58043BK 58083BK 58123BK 58043SA 58083SA 58123SA 58043SP 58083SP 58123SP 1 5/16" Rating: 120/240 volt Project: Track Profile 68 online Find it Fast ZSLI track allows for easy planning — no starter or joiner tracks required. 1-Circuit Track 4'/8'/12' 4. Color Finishes WH – White BK – Black SA – Satin Aluminum (to match titan track fixtures) SP – Special color (requires approved color chip) NOTE: National or municipal codes must be followed regarding set back of thermal insulating material from fixture. As a guideline, any insulation materials must be held away from the fixture by a minimum of 3". Fixtures are not designed for direct contact with thermal insulation. 3. Weightload - 4.5 lbs. every 8" with support spacing every 40", 22 lbs. every 8" with support every 20". Zumtobel Lighting Inc. ©2011 3300 Route 9W • Highland, NY 12528-2630 www.zumtobel.us TEL (845) 691-6262 • (800) 932-0633 • FAX (845) 691-6289 05/03/11 In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Technical specification sheets that appear on www. zumtobel.us are the most recent version and supersede all other versions that exist in any other printed or electronic form. TC-1 Surface Mounting Options Both Zumtobel Staff track systems, 1-circuit and 3-circuit, are designed for use with the following four mounting options as illustrated below: Direct, Toggle, T-Bar and Uneven wall or ceiling. Direct Track Mount Toggle Bolt Track Mount Within a maximum of 4 ft. between mounting points, 1-circuit track is supplied with oval knockouts for #8 screw clearance holes. For 3-circuit, the track is drilled (by others) with a ∅ 3/16" drill bit and mounted flush against the mounting surface. Toggle mount is recommended for applications where the ceiling structural support is not readily accessible. The ceiling surface is drilled to accommodate the size toggle used for the application. MAINS N 1 2 3 T-Bar Track Mount Uneven Wall or Ceiling Track Mount T-Bar clips are available to attach the track to the T-Bar channel, complete with mounting hardware. It can be done either directly as illustrated or with the use of the mounting bracket. 20A 20A 20A The mounting brackets are used primarily for wall and uneven ceilings. The clips are fastened to the wall or MAINS ceiling using aN maximum of 4 ft. apart. 1 into the 20A The track snaps clips and is tightened with2 a locking 20A screw. The mounting brackets may also be used with a T-Bar ceiling system. Connection and Switching Alternatives 1-Circuit MAINS Circuit diagrams for 1-Circuit Zumtobel Staff track. N All Zumtobel Staff track systems are supplied ready for installation. All feeds and connectors are prewired, eliminating costly job site wiring, and have been designed to maintain polarization integrity. The tracks are easily field cuttable. The pliers (#58349) are used to trim the copper back to a 3/8" safety distance, as required by the U.L. listing. L TRACK N 20A L 3-Circuit Circuit diagrams for 3-Circuit Zumtobel Staff track. A. For maximum load 60 A/7200w (3 x 2400w) Three phase 120V AC System. A NNN N 1111 2222 3333 B. For maximum load 20 A/2400w (3 x 800w) One branch circuit 120V, split in three circuits of 800w each. C. F or maximum load 2 x 20 A/4800w (2 x 2400w). One branch circuit 120/240V permits two circuits 2400w each. C D. For maximum load 2 x 20 A/4800w (1 x 2400w + 2 x 1200w). One branch circuit 2400w. One circuit split in 2 x 1200w. N NNN 1111 2222 MAINS MAINS MAINS MAINS 20A 20A 20A 20A 20A 20A 20A 20A 20A 20A 20A 20A MAINS MAINS MAINS MAINS 20A 20A 20A 20A 20A 20A 20A 20A Zumtobel Lighting Inc. ©2011 3300 Route 9W • Highland, NY 12528-2630 www.zumtobel.us TEL (845) 691-6262 • (800) 932-0633 • FAX (845) 691-6289 05/03/11 MAINS MAINS MAINS MAINS TC-1A TRACK TRACK TRACK TRACK TRACK TRACK TRACK TRACK NNN N 1111 2222 3333 B TRACK TRACK TRACK TRACK N NNN 1 111 2222 3333 D NNN N 1111 NNN N 1111 2222 MAINS MAINS MAINS MAINS 20A 20A 20A 20A MAINS MAINS MAINS MAINS 20A 20A 20A 20A 20A 20A 20A 20A TRACK N 1 2 3 TRACK TRACK TRACK TRACK NNN N 1 1 11 2222 3333 TRACK TRACK TRACK TRACK NNN N 1111 2222 3333 TRACK N 1 2 3