Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Quick Reference Guide RotoSphere™ LED QRG About this Guide The RotoSphere™ LED Quick Reference Guide (QRG) only contains the product’s connection and mounting information as well as the menu options and the DMX values. · Disclaimer Safety Notes · Please read the following notes carefully before starting to work with this product. They include important safety information about its installation, usage, and maintenance. · · · · · · · · · · · · · · What is Included This Quick Reference Guide DOES NOT replace the product’s user manual, which you can download from the CHAUVET® Web site (www.chauvetlighting.com). You must read ALL the disclaimers and safety notes in this document as well as those in the product’s user manual before installing, operating, or maintaining this product. · · · Always connect this product to a grounded circuit to avoid the risk of electrocution. Always disconnect this product from the power source before cleaning it or replacing the fuse. Avoid direct eye exposure to the light source while the fixture is on. Make sure the power cord is not crimped or damaged. Make sure there are no flammable materials close to the unit while operating. Do not touch this product’s housing when operating because it may be very hot. Always make sure that the voltage of the outlet to which you are connecting this product is within the range stated on the decal or rear panel of the fixture. This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose this fixture to rain or moisture. Never connect this product to a dimmer pack. Make sure to replace the fuse with another of the same type and rating. Never carry this product from the power cord or any moving part. Always use the hanging/mounting bracket or the handles. The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate this product at higher temperatures. In the event of a serious operating problem, stop using the unit immediately. Never try to repair this product. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center. One RotoSphere™ LED One Power Cord One Hanging Bracket Page 2 of 8 · · One Warranty Card One Quick Reference Guide RotoSphere™ LED QRG Product Description The RotoSphere™ LED is a mirror ball simulator with five, high-powered tri color LEDs. Using DMX or stand-alone control modes, it utilizes userselectable colors and variable rotation speeds and is easily mountable. Product Overview LED Display Power In/Out Microphone Microphone Sensitivity Knob DMX In/Out Safety Hook Mounting Bracket Page 3 of 8 RotoSphere™ LED QRG AC Power This product has an auto-ranging power supply that can work with an input voltage range of 100~240 VAC, 50/60 Hz. Power Linking You can link up to 20 RotoSphere™ LED units to this fixture at 120 VAC or 40 RotoSphere™ LED units at 230 VAC. Make sure to never exceed this number. Fuse 1) Disconnect this fixture/product from the power outlet. Replacement 2) Wedge the tip of a flat head screwdriver into the slot of the fuse holder and pry the safety cap out of its housing. It will pull the installed fuse with it. 3) Remove the blown fuse from its safety cap and replace it with a fuse of the exact same type and rating (F 1 A, 250 V). 4) Insert the fuse holder back in its place, and reconnect power. DMX Linking The RotoSphere™ LED can work with a DMX controller when linked using a regular DMX serial connection. If you are not familiar with the DMX standard, please download the DMX Primer document from www.chauvetlighting.com. DMX Connection The RotoSphere™ LED uses a regular DMX data connection for its 4channel DMX personality. Download the RotoSphere™ LED user manual and refer to the Setup chapter to learn how to connect this fixture for DMX operation, and the Operation Instructions chapter to learn in detail how to configure this fixture for DMX operation. Master/Slave The RotoSphere™ LED uses the DMX data connection for its Master/Slave Connection mode. Download the RotoSphere™ LED user manual and refer to the Setup chapter to learn how to connect this fixture for Master/Slave operation, and the Operation chapter to learn in detail how to configure this fixture for Master/Slave operation. Page 4 of 8 RotoSphere™ LED QRG Mounting Before mounting this product, read the safety notes at the beginning of this guide and in the product’s user manual. Then, follow the mounting procedure indicated in the Setup chapter of the user manual. Mounting Bracket Rubber Feet (x4) Safety Hook Product Mounting Diagram Page 5 of 8 RotoSphere™ LED QRG Programming Control Panel Description For details on how to program this product, please refer to the product’s user manual. Button Function <MENU> Exits from the current menu or function Navigates upwards through the menu list and increases the <UP> numeric value when in a function Navigates downwards through the menu list and decreases the <DOWN> numeric value when in a function Enables the currently displayed menu or sets the currently <ENTER> selected value into the selected function Start Address To ensure full access to all channels in each DMX mode, the highest recommended DMX address is 509. Menu Options (Stand-Alone) Mode 1. DMX Address 2. Soundactivated Mode 3. Automatic Mode 4. Color Mode Programming Steps d1 c1 F 0 (forward) 5. Motor rotation r 0 (reverse) 001~512 Description Sets the DMX starting address SOUd Selects Sound-activated Mode AUTO Selects Automatic Mode c1 c2 c3 c4 c5 c6 c7 c8 c9 c 10 F0 F 1-99 r0 r 1-99 Page 6 of 8 Red Green Blue Red + Green Red + Blue Green + Blue Red + Green + Blue All colors in chase mode (fast speed) All colors in chase mode (normal speed) All colors in chase mode (slow speed) Static Clockwise rotation (slow to fast) Static Counter clockwise (slow to fast) RotoSphere™ LED QRG DMX Values 4-CH Channel Function 1 Motor Rotation 2 Colors 3 Strobe 4 Automatic and Sound Modes Value 000 ó 009 010 ó 127 128 ó 137 138 ó 255 000 ó 031 032 ó 063 064 ó 095 096 ó 127 128 ó 159 160 ó 191 192 ó 223 224 ó 255 000 ó 009 010 ó 255 000 ó 010 011 ó 249 250 ó 255 Page 7 of 8 Percent/Setting No function Counter clockwise rotation (slow to fast) No function Clockwise rotation (slow to fast) No function Red Green Blue Red + Green Red + Blue Green + Blue Red + Green + Blue No function Strobe effect (slow to fast) No function Automatic programs Sound-activated Mode RotoSphere™ LED QRG Contact Us World Headquarters United Kingdom and Ireland CHAUVET® CHAUVET® Europe Ltd. General Information Address: 5200 NW 108th Avenue Sunrise, FL 33351 (954) 577-4455 (954) 929-5560 (800) 762-1084 Voice: Fax: Toll free: Technical Support Voice: Fax: Email: General Information Address: Unit 1C Brookhill Road Industrial Estate Pinxton, Nottingham, UK NG16 6NT Voice: +44 (0)1773 511115 Fax: +44 (0)1773 511110 Technical Support (954) 577-4455 (Press 4) (954) 756-8015 [email protected] World Wide Web www.chauvetlighting.com Email: [email protected] World Wide Web www.chauvetlighting.co.uk Outside the US, United Kingdom, or Ireland, contact your distributor of record. Follow their instructions to request support or to return a product. Visit our Web site for contact details. RotoSphere™ LED QRG – Rev. 01b © Copyright 2011 CHAUVET® All rights reserved Printed in the P. R. C. Page 8 of 8