Download 6N135, 6N136, HCPL4502 OPTOCOUPLERS/OPTOISOLATORS

6N135, 6N136, HCPL4502
OPTOCOUPLERS/OPTOISOLATORS
SOES022A – JULY 1986 – REVISED APRIL 1998
D
D
D
D
D
D
D
Compatible with TTL Inputs
High-Speed Switching . . . 1 Mbit/s Typ
Bandwidth . . . 2 MHz Typ
High Common-Mode Transient
Immunity . . . 1000 V/µs Typ
High-Voltage Electrical
Insulation . . . 3000 Vdc Min
Open-Collector Output
UL Recognized . . . File Number 65085
6N135, 6N136, OR HCPL4502 PACKAGE
(TOP VIEW)
NC
ANODE
CATHODE
NC
1
8
2
7
3
6
4
5
VCC
BASE/OPEN†
OUTPUT
GND
† Terminal 7 is BASE on the 6N135 and
6N136 and OPEN on the HCPL4502
NC – No internal connection
description
These high-speed optocouplers are designed for use in analog or digital interface applications that require
high-voltage isolation between the input and output. Applications include line receivers that require high
common-mode transient immunity, and analog or logic circuits that require input-to-output electrical isolation.
The 6N135, 6N136, and HCPL4502 optocouplers each consists of a light-emitting diode and an integrated
photon detector composed of a photodiode and an open-collector output transistor. Separate connections are
provided for the photodiode bias and the transistor-collector output. This feature, which reduces the transistor
base-to-collector capacitance, results in speeds up to one hundred times that of a conventional phototransistor
optocoupler.
The 6N135 is designed for TTL/CMOS, TTL/LSTTL, and wide-band analog applications.
The 6N136 and HCPL4502 are designed for high-speed TTL/TTL applications. The HCPL4502 has no base
connection.
schematic
ANODE
2
8
7
6
CATHODE
VCC
BASE: 6N135, 6N136
OPEN: HCPL4502
OUTPUT
3
5
GND
Copyright  1998, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
6N135, 6N136, HCPL4502
OPTOCOUPLERS/OPTOISOLATORS
SOES022A – JULY 1986 – REVISED APRIL 1998
absolute maximum ratings at 25°C free-air temperature (unless otherwise noted)†‡
Supply and output voltage range, VCC and VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 15 V
Reverse input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 V
Emitter-base reverse voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 V
Peak input forward current (pulse duration = 1 ms, 50% duty cycle, see Note 1) . . . . . . . . . . . . . . . . . . 50 mA
Peak transient input forward current (pulse duration 1 µs, 300 Hz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 A
Average forward input current(see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 mA
Peak output current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 mA
Average output current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 mA
Base current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 mA
Input power dissipation at (or below) 70°C free-air temperature (see Note 3) . . . . . . . . . . . . . . . . . . . . . 45 mW
Output power dissipation at (or below) 70°C free-air temperature (see Note 4) . . . . . . . . . . . . . . . . . . 100 mW
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C
Operating free-air temperature range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 100°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
‡ JEDEC registered data for 6N135 and 6N136
NOTES: 1. Derate linearly above 70°C free-air temperature at the rate of 1.67 mA/°C.
2. Derate linearly above 70°C free-air temperature at the rate of 0.83 mA/°C.
3. Derate linearly above 70°C free-air temperature at the rate of 1.50 mW/°C.
4. Derate linearly above 70°C free-air temperature at the rate of 3.33 mW/°C.
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
6N135, 6N136, HCPL4502
OPTOCOUPLERS/OPTOISOLATORS
SOES022A – JULY 1986 – REVISED APRIL 1998
electrical characteristics over operating free-air temperature range of 0°C to 70°C (unless
otherwise noted)
PARAMETER
TEST CONDITIONS
6N135
MIN TYP†
MAX
1.6
1.7
6N136, HCPL4502
MIN
TYP†
MAX
UNIT
1.6
V
VF‡
Input forward voltage
IF = 16 mA,
∝VF
Temperature coefficient of
forward voltage
IF = 16 mA
VBR‡
Input breakdown voltage
IR = 10 µA,
TA = 25°C
VOL
Low level output voltage
Low-level
VCC = 4.5 V,
IF = 16 mA,
mA
IB = 0
IOL = 1.1 mA
High level output current
High-level
IF = 0,
IB = 0
0,
TA = 25°C
VCC = VO = 5.5 V
3
IOH‡
VCC = VO = 15 V
0.01
IOH
High-level output current
VCC = 15 V,
IF = 0,
VO = 15 V,
IB = 0
ICCH‡
Supply current, high-level
output
IO = 0,
IB = 0,
ICCH
Supply current, high-level
output
VCC = 15 V,
IF = 0,
TA = 25°C
VCC = 15 V,
IF = 0,
ICCL
Supply current, low-level
output
VCC = 15 V,
IF = 16 mA,
IO = 0,
IB = 0
hFE
Transistor forward current
transfer ratio
VO = 5 V,
IO = 3 mA
CTR‡
Current transfer ratio
VO = 0.4 V,
IB = 0,
See Note 5
CTR
Current transfer ratio
VCC = 4.5 V,
IF = 16 mA,
TA = 25°C,
VCC = 4.5 V,
IF = 16 mA,
See Note 5
rIO
Input-output resistance
VIO = 500 V,
See Note 6
TA = 25°C,
IIO‡
Input-output insulation
leakage current
VIO = 3000 V,
TA = 25°C,
See Note 6
t = 5 s,
RH = 45%,
Ci
Input capacitance
60
60
pF
Input-output capacitance
VF = 0,
f = 1 MHz,
f = 1 MHz
Cio
See Note 6
0.6
0.6
pF
TA = 25°C
– 1.8
– 1.8
5
mV/°C
5
0.1
V
0.4
V
IOL = 2.4 mA
0.1
0.4
500
3
500
nA
1
0.01
1
µA
50
µA
1
µA
2
µA
50
0.02
IO = 0,
IB = 0
VO = 0.5 V,
IB = 0,
1.7
1
0.02
2
40
100
(6N136
only)
100
7%
µA
40
18%
19%
5%
24%
15%
1012
Ω
1012
1
1
µA
† All typical values are at TA = 25°C.
‡ JEDEC registered data for 6N135 and 6N136
NOTES: 5. Current transfer ratio is defined as the ratio of output collector current IO to the forward LED input current IF times 100%.
6. These parameters are measured with terminals 2 and 3 shorted together and terminals 5, 6, 7, and 8 shorted together.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
6N135, 6N136, HCPL4502
OPTOCOUPLERS/OPTOISOLATORS
SOES022A – JULY 1986 – REVISED APRIL 1998
operating characteristics, VCC = 5 V, IF = 16 mA, TA = 25°C (unless otherwise noted)
PARAMETER
BW
Bandwidth (– 3 dB)
TEST CONDITIONS
RL = 100 Ω,
6N135
MIN
TYP
See Note 7
6N136, HCPL4502
MAX
MIN
2
TYP
MAX
2
UNIT
MHz
NOTE 7: Bandwidth is the range of frequencies within which the ac output voltage is not more than 3 dB below the low-frequency value.
switching characteristics at VCC = 5 V, IF = 16 mA, TA = 25°C
PARAMETER
tPLH†
tPHL†
dV
CM
(H)
dt
dV
CM
(L)
dt
Propagation delay
time low
time,
low-to-highto high
level output
Propagation delay
time high
time,
high-to-lowto low
level output
Common-mode
input transient
immunity,
high-level output
Common-mode
input transient
immunity,
low-level output
6N135
TEST CONDITIONS
MIN
RL = 4.1 kΩ,
See Figure 1
See Note 8,
RL = 1.9 kΩ,
See Figure 1
See Note 9,
RL = 4.1 kΩ,
See Figure 1
See Note 8,
RL = 1.9 kΩ,
See Figure 1
See Note 9,
∆VCM = 10 V,
RL = 4.1 kΩ,
See Figure 2
IF = 0,
See Notes 8 and 10,
∆VCM = 10 V,
RL = 1.9 kΩ,
See Figure 2
IF = 0,
See Notes 9 and 10,
∆VCM = 10 V,
See Notes 9 and 10,
RL = 4.1 kΩ,
See Figure 2
∆VCM = 10 V,
See Notes 9 and 10,
RL = 1.9 kΩ,
See Figure 2
6N136, HCPL4502
TYP
MAX
1
1.5
MIN
TYP
MAX
0.6
0.8
0.6
0.8
UNIT
µs
0.7
1.5
µs
1000
V/µs
1000
1000
V/µs
1000
† JEDEC registered data for 6N135 and 6N136
NOTES: 8. The 4.1-kΩ load represents one LSTTL unit load of 0.36 mA and a 6.1-kΩ pullup resistor.
9. The 1.9-kΩ load represents one TTL unit load of 1.6 mA and a 5.6-kΩ pullup resistor.
10. Common-mode transient immunity, high-level output, is the maximum rate of rise of the common-mode input voltage that does not
cause the output voltage to drop below 2 V. Common-mode input transient immunity, low-level output, is the maximum rate of fall
of the common-mode input voltage that does not cause the output voltage to rise above 0.8 V.
4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
6N135, 6N136, HCPL4502
OPTOCOUPLERS/OPTOISOLATORS
SOES022A – JULY 1986 – REVISED APRIL 1998
PARAMETER MEASUREMENT INFORMATION
5V
Pulse
Generator
ZO = 50 Ω
tr = 5 ns
RL
Output
Input Current
Monitor
CL = 15 pF
(see Note A)
Open
100 Ω
GND
TEST CIRCUIT
Input
Current
IF
0V
5V
Output
Voltage
1.5 V
1.5 V
VOL
tPHL
tPLH
WAVEFORMS
NOTE A: CL includes probe and stray capacitance.
Figure 1. Switching Test Circuit and Waveforms
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
6N135, 6N136, HCPL4502
OPTOCOUPLERS/OPTOISOLATORS
SOES022A – JULY 1986 – REVISED APRIL 1998
PARAMETER MEASUREMENT INFORMATION
IF
5V
RL
Output
A
B
Open
VFF
GND
Generator
TEST CIRCUIT
10 V
Generator
90%
dVCM
dt
90%
10%
10%
tr
0V
tf
Output
Switch at A: IF = 0
VOL
Switch at B: IF = 16 mA
VOLTAGE WAVEFORMS
Figure 2. Transient Immunity Test Circuit and Waveforms
6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
8V
tr or tf
tr = 8 ns TYP
tf = 8 ns TYP
5V
Output
=
6N135, 6N136, HCPL4502
OPTOCOUPLERS/OPTOISOLATORS
SOES022A – JULY 1986 – REVISED APRIL 1998
TYPICAL CHARACTERISTICS
INPUT-DIODE FORWARD CURRENT
vs
FORWARD VOLTAGE
6N135
CURRENT TRANSFER CHARACTERISTICS
12
20
VCC = 5 V
TA = 25°C
11
18
10
16
I O – Output Current – mA
I F – Input-Diode Forward Current – mA
TA = 25°C
14
12
10
8
6
4
9
IF = 40 mA
IF = 35 mA
IF = 30 mA
8
7
6
5
4
IF = 25 mA
3
IF = 20mA
IF = 15mA
2
2
1
0
1.1
0
1.2
1.5
1.6
1.3
1.4
VF – Forward Voltage – V
1.7
IF = 10mA
0
2
IF = 5 mA
8
12
14
4
6
10
VO – Output Voltage – V
Figure 4
Figure 3
CURRENT TRANSFER RATIO (NORMALIZED)
vs
INPUT DIODE FORWARD CURRENT
CURRENT TRANSFER RATIO (NORMALIZED)
vs
FREE-AIR TEMPERATURE
1.1
1.1
CTR – Current Transfer Ratio (Normalized)
CTR – Current Transfer Ratio (Normalized)
1.2
6N136
HCPL4502
1
0.9
0.8
6N135
0.7
0.6
0.5
0.4
0.3
VCC = 5 V
VO = 0.4 V
TA = 25°C
Normalized to IF = 16 mA
0.2
0.1
0
1
2
4
7
10
16
20
40
70
100
VCC = 5 V
VO = 0.4 V
IF = 16 mA
6N135
6N136,
HCPL4502
1
0.9
0.8
0.7
0.6
– 60
– 40
IF – Input Diode Forward Current – mA
Figure 5
– 20
0
20
40
60
80
TA – Free-Air Temperature – °C
100
Figure 6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
7
6N135, 6N136, HCPL4502
OPTOCOUPLERS/OPTOISOLATORS
SOES022A – JULY 1986 – REVISED APRIL 1998
TYPICAL CHARACTERISTICS
DIFFERENTIAL CURRENT TRANSFER RATIO
vs
INPUT-DIODE QUIESCENT FORWARD CURRENT
HIGH-LEVEL OUTPUT CURRENT
vs
FREE-AIR TEMPERATURE
VCC = 5 V
VO = 5 V
IF = 0
4000
I OH – High-Level Output Current – nA
CTR(ac) – Differential Current Transfer Ratio – %
10,000
1000
400
100
40
10
4
1
0.4
0.1
– 75
– 50
–2 5
0
25
50
75
100
TA – Free-Air Temperature – °C
30
25
20
6N135
15
10
5
0
0
125
5
20
PROPAGATION DELAY TIME
vs
FREE-AIR TEMPERATURE
1.2
t PLH, t PHL– Propagation Delay Time – µ s
0
Frequency Response (Normalized)
15
Figure 8
FREQUENCY RESPONSE (NORMALIZED)
vs
FREQUENCY
–5
– 10
RL = 100 Ω
RL = 220 Ω
RL = 470 Ω
RL = 1 kΩ
– 15
– 20
– 25
IF = 16 mA
TA = 25°C
0.2
0.4
0.7 1
2
4
7
10
1.1
1
VCC = 5 V
IF = 16 mA
RL = 4.1 kΩ for 6N135
RL = 1.9 kΩ for 6N136
6N135 tPLH
0.9
0.8
6N135 tPHL
0.7
0.6
6N136 tPHL
HCPL4502
0.5
0.4
– 60
6N136 tPLH
HCPL4502
– 40
– 20
0
20
Figure 9
Figure 10
POST OFFICE BOX 655303
40
60
TA – Free-Air Temperature – °C
f – Frequency – MHz
8
10
IF – Input-Diode Quiescent Forward Current – mA
Figure 7
– 30
0.1
VCC = 5 V
VO = 0.4 V
TA = 25°C
6N136
HCPL4502
• DALLAS, TEXAS 75265
80
100
6N135, 6N136, HCPL4502
OPTOCOUPLERS/OPTOISOLATORS
SOES022A – JULY 1986 – REVISED APRIL 1998
MECHANICAL INFORMATION
9,91 (0.390)
9,49 (0.370)
8
7
6
5
1
2
3
4
Index Dot
C
L
7,87 (0.310)
7,37 (0.290)
C
L
6,60 (0.260)
6,10 (0.240)
1,78 (0,070)
1,14 (0.045)
0,89 (0.035) MIN
4,70 (0.185) MAX
105°
90°
8 Places
Seating Plane
Gauge Plane
0,76 (0.030)
0,00 (0.000)
0,84 (0.033) MIN
8 Places
0,51 (0.020)
MIN
3,17 (0.125) MIN
0,33 (0.013)
0,18 (0.007)
1,40 (0.055)
0,76 (0.030)
2,79 (0.110)
2,29 (0.090)
0, 457 ± 0,076
(0.018 ± 0.003)
8 Places
NOTES: A. JEDEC registered data. This data sheet contains all applicable registered data in effect at the time of publication.
B. All linear dimensions are given in millimeters and parenthetically given in inches.
Figure 11. Packaging Specifications
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
9
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright  1998, Texas Instruments Incorporated