Download Solonoid driver

Interface technology in modular housing
DIN rail devices, IM series
Solonoid driver, 1‑channel
Features
▪▪ ATEX, IECEx, UL, CFMUS TR CU, NEPSI, ​
INMETRO
U1
+1
24 V (U1)
15 V (U2)
U2
1 +2
11+
1
YE
–3
12 –
1 19...30 VDC
<3W
▪▪ Installation in zone 2
▪▪ Voltage input max. 30 VDC
▪▪ Voltage outuput 15 VDC resp. 24 VDC
▪▪ Output current ≤ 40 mA
▪▪ Switching frequency ≤ 500 Hz
▪▪ SIL3
▪▪ Removable terminal blocks
▪▪ Galvanic isolation between input cir‑
cuits ​and output circuits
explosive
atmospheres​voltage and are adapted to the ​valves of
The
1‑channel
solonoid
driver​potentially
IM72‑11EX/L provides intrinsically safe​ caused by dust or gas, provided they​ different manufacturers (see ​
output
limited power at the output. This ​enables comply with the applicable regulations.
curve on next page).
them to be used directly for ​supplying
loads in the Ex area.
Typical applications are the control of ​Exi The loads are actuated by applying the​
pilot valves as well as the supply of d
​ is‑ operating voltage.
Within the area of applicability of the E​ u‑ plays and transmitters. The output v​ alues
ropean directive 94/9/EC (ATEX) it is ​per‑ of the two connections U1 and ​U2 per A yellow LED indicates the switching​
mitted to operate connected loads in​ channel differ in terms of their n
​ o-load state of the associated output.
Zone 2: Do not disconnect when live!
IM72-11Ex/L
426
Hans Turck GmbH & Co. KG ■ Tel. +49 208 49 52-0 ■ Fax +49 208 49 52-264
Interface technology in modular housing
DIN rail devices, IM series
Technical data
IM72-11EX/L
7520703
Power supply
Nominal voltage
Power consumption
24 VDC loop-powered
≤ 1.5 W
Inputs
0-signal
1-signal
Voltage input
Current input
Input delay
0…5 VDC
19…30 VDC
max. 30 VDC
45 mA
≤ 2 ms
Outputs
Output circuits
Output current
Output voltage
Output voltage
Output curve
Application area
Protection type
Max. values:
Max.output voltage Uo
Max. output current Io
Max. output power Po
Characteristic
Internal inductance/capacitance Li/​Ci
External inductance/capacitance Lo/Co
Ex nL
Lo [mH]
Co [nF]
intrinsically safe acc. to EN 60079
40 mA
U1=24 V
U2=15 V
Response characteristic
Limit frequency
≤ 500 Hz
Approvals and declarations
Ex approval acc. to conformity certificate
Device designation
Max. values:
Max. output voltage Uo
Max. output current Io
Max. output power Po
Rated voltage
Characteristic
Internal inductance/capacitance Li/​Ci
External inductance/capacitance Lo/Co
EEx ia
Lo [mH]
Co [nF]
IIC
0.68
62
0.5
70
Max. values:
Max. output voltage Uo
Max. output current Io
Max. output power Po
Characteristic
Internal inductance/capacitance Li/​Ci
External inductance/capacitance Lo/Co
EEx ia
Lo [mH]
Co [µF]
IIC
1.2
0.13
0.5
0.15
Ex approval acc. to conformity certificate
TÜV 05 ATEX 2846 X
É II (1) GD [EEx ia] IIC
Terminal connection: 1+3
≤ 27 V
≤ 96 mA
≤ 678 mW
250 V
Trapezoidal
negligibly small
IIB
13
260
2
300
Terminal connection: 2+3
≤ 17.6 V
≤ 96 mA
≤ 678 mW
trapezoidal
negligibly small
IIB
13.0
0.47
0.5
130
Max. values:
Max.output voltage Uo
Max. output current Io
Max. output power Po
Characteristic
Internal inductance/capacitance Li/​Ci
External inductance/capacitance Lo/Co
Ex nL
Lo [mH]
Co [µF]
IIC
0.68
120
IIC
1.2
0.37
0.5
0.42
II 3 G
Ex nA [nL] IIC/IIB T4
Terminal connection: 1+3
≤ 27 V
≤ 96 mA
≤ 678 mW
trapezoidal
negligibly small
IIB
13
570
2
620
Terminal connection: 2+3
≤ 17.6 V
≤ 96 mA
≤ 678 mW
trapezoidal
negligibly small
IIB
13
1
2.0
2.1
Declaration
SIL 3 acc. to EXIDA FMEDA
Indication
Switching state
yellow
Environmental Conditions
Ambient temperature
Storage temperature
Test voltage
-25…+70 °C
-40…+80 °C
2.5 kV
Mechanical data
Tightening torque
Electrical connection
Terminal cross-section
Housing material
Mounting instruction
Protection class
Flammability class acc. to UL 94
Dimensions
Approval | Certification
0.5 Nm
4 x 3‑pin removable terminal blocks, ​
reverse polarity protected, screw ​
connection
1 x 2.5 mm2 / 2 x 1.5 mm2
Polycarbonate/ABS
for DIN rail / panel
IP20
V-0
18 x 104 x 110 mm
ATEX, IECEx, UL, cFMus, TR CU, NEPSI, ​
INMETRO
2.0
1.1
TÜV 06 ATEX 553388 X
[email protected] ■ www.turck.com ■ Edition I/2014
427
Interface technology
Type
Ident no.
Interface technology in modular housing
DIN rail devices, IM series
Solonoid driver, 2‑channel
Features
▪▪ ATEX, IECEx, UL, CFMUS TR CU, NEPSI, ​
INMETRO
U1
+1
U2
1 +2
11 +
1
YE
–3
24 V (U1)
15 V (U2)
12 –
19...30 VDC
<3W
U1
+4
U2
2 +5
1
8+
2
YE
–6
9–
2
▪▪ Installation in zone 2
▪▪ Voltage input max. 30 VDC
▪▪ Voltage outuput 15 VDC resp. 24 VDC
▪▪ Output current ≤ 40 mA
▪▪ Switching frequency ≤ 500 Hz
▪▪ SIL3
▪▪ Removable terminal blocks
▪▪ Galvanic isolation between input and ​
output circuits
IM72‑
The 1‑channel solonoid driver ​
22EX/L provides intrinsically safe ​limited
power at the output. This ​enables them
to be used directly for ​supplying loads in
the Ex area.
potentially
explosive
atmospheres​voltage and are adapted to the ​valves of
caused by dust or gas, provided they​ different manufacturers (see ​
output
comply with the applicable regulations.
curve on next page).
Typical applications are the control of ​Exi
pilot valves as well as the supply of d
​ is‑
Within the area of applicability of the E​ u‑ plays and transmitters. The output v​ alues
ropean directive 94/9/EC (ATEX) it is ​per‑ of the two connections U1 and ​U2 per
mitted to operate connected loads in​ channel differ in terms of their n
​ o-load
The loads are actuated by applying the​
operating voltage.
A yellow LED indicates the switching​
state of the associated output.
428
Hans Turck GmbH & Co. KG ■ Tel. +49 208 49 52-0 ■ Fax +49 208 49 52-264
Interface technology in modular housing
DIN rail devices, IM series
Technical data
IM72-22EX/L
7520702
Power supply
Nominal voltage
Power consumption
24 VDC loop-powered
≤ 2.2 W
Inputs
0-signal
1-signal
Voltage input
Current input
Input delay
0…5 VDC
19…30 VDC
max. 30 VDC
45 mA
≤ 2 ms
Outputs
Output circuits
Output current
Output voltage
Output voltage
Output curve
Application area
Protection type
Max. values:
Max.output voltage Uo
Max. output current Io
Max. output power Po
Characteristic
Internal inductance/capacitance Li/​Ci
External inductance/capacitance Lo/Co
Ex nL
Lo [mH]
Co [nF]
intrinsically safe acc. to EN 60079
40 mA
U1=24 V
U2=15 V
Response characteristic
Limit frequency
≤ 500 Hz
Approvals and declarations
Ex approval acc. to conformity certificate
Device designation
Max. values:
Max. output voltage Uo
Max. output current Io
Max. output power Po
Rated voltage
Characteristic
Internal inductance/capacitance Li/​Ci
External inductance/capacitance Lo/Co
EEx ia
Lo [mH]
Co [nF]
IIC
0.68
62
0.5
70
Max. values:
Max. output voltage Uo
Max. output current Io
Max. output power Po
Characteristic
Internal inductance/capacitance Li/​Ci
External inductance/capacitance Lo/Co
EEx ia
Lo [mH]
Co [µF]
IIC
1.2
0.13
0.5
0.15
Ex approval acc. to conformity certificate
TÜV 05 ATEX 2846 X
É II (1) GD [EEx ia] IIC
Terminal connection: 1+3 / 4+6
≤ 27 V
≤ 96 mA
≤ 678 mW
250 V
Trapezoidal
negligibly small
IIB
13
260
2
300
Terminal connection: 2+3 / 5+6
≤ 17.6 V
≤ 96 mA
≤ 678 mW
trapezoidal
negligibly small
IIB
13.0
0.47
0.5
130
Max. values:
Max.output voltage Uo
Max. output current Io
Max. output power Po
Characteristic
Internal inductance/capacitance Li/​Ci
External inductance/capacitance Lo/Co
Ex nL
Lo [mH]
Co [µF]
IIC
0.68
120
IIC
1.2
0.37
0.5
0.42
II 3 G
Ex nA [nL] IIC/IIB T4
Terminal connection: 1+3 / 4+6
≤ 27 V
≤ 96 mA
≤ 678 mW
trapezoidal
negligibly small
IIB
13
570
2
620
Terminal connection: 2+3 / 5+6
≤ 17.6 V
≤ 96 mA
≤ 678 mW
trapezoidal
negligibly small
IIB
13
1
2.0
2.1
Declaration
SIL 3 acc. to EXIDA FMEDA
Indication
Switching state
yellow
Environmental Conditions
Ambient temperature
Storage temperature
Test voltage
-25…+70 °C
-40…+80 °C
2.5 kV
Mechanical data
Tightening torque
Electrical connection
Terminal cross-section
Housing material
Mounting instruction
Protection class
Flammability class acc. to UL 94
Dimensions
Approval | Certification
0.5 Nm
4 x 3‑pin removable terminal blocks, ​
reverse polarity protected, screw ​
connection
1 x 2.5 mm2 / 2 x 1.5 mm2
Polycarbonate/ABS
for DIN rail / panel
IP20
V-0
18 x 104 x 110 mm
ATEX, IECEx, UL, cFMus, TR CU, NEPSI, ​
INMETRO
2.0
1.1
TÜV 06 ATEX 553388 X
[email protected] ■ www.turck.com ■ Edition I/2014
429
Interface technology
Type
Ident no.
Interface Technology in Modular Housing
DIN rail mounted devices of the IME series
Solonoid driver, 1‑channel
Features
▪▪ ATEX, IECEx, TR CU, NEPSI
▪▪ Installation in zone 2
▪▪ Solonoid driver (intrinsically safe ​pow‑
er source), 1‑channel
+6
U1: 24 VDC
U2: 15 VDC
1 +5
U1
U2
8+
1
YE
–4
7–
1 24 VDC
<3W
▪▪ 2 output values selectable per channel
▪▪ LED status indication
▪▪ Complete galvanic isolation
The 1‑channel solonoid driver ​IME-DO11Ex/L provides limited current ​and volt‑
age at the intrinsically safe ​output. This
enables them to be used d
​ irectly for sup‑
plying loads in the Ex ​area.
potentially
explosive
atmospheres​terms of their no-load voltage (​see out‑
caused by dust or gas, provided they​ put curve on next page). They ​are adapt‑
comply with the applicable regulations.​ ed to the valves of different m
​ anufactur‑
Typical applications are the control of ers. The loads are actuated ​by applying
Ex i pilot valves as well as the supply of​ the operating voltage.
displays and transmitters.
Within the area of applicability of the E​ u‑
A yellow LED indicates the switching​
ropean directive 94/9/EC (ATEX) it is ​per‑ The output values of the two c​onnec‑ state of the associated output.
mitted to operate connected loads in​ tions U1 and U2 per channel ​differ in
458
Hans Turck GmbH & Co. KG ■ Tel. +49 208 49 52-0 ■ Fax +49 208 49 52-264
Interface Technology in Modular Housing
DIN rail mounted devices of the IME series
Technical data
IME-DO-11EX/L
7541196
Internal inductance/capacitance Li/​Ci
External inductance/capacitance Lo/Co
Power supply
Nominal voltage
Power consumption
24 VDC loop-powered
≤ 1.5 W
Inputs
0-signal
1-signal
Voltage input
Current input
Input delay
0…5 VDC
20…30 VDC
max. 30 VDC
45 mA
≤ 0.4 ms
Outputs
Output current
Output voltage
Output voltage
Output curve
Ex nL
Lo [mH]
Co [µF]
Ex nL
Lo [mH]
Co [µF]
Ex ia
Lo [mH]
Co [µF]
IIC
0.68
0.067
0.5
0.076
Max. output voltage Uo
Max. output current Io
Max. output power Po
Characteristic
Internal inductance/capacitance Li/​Ci
External inductance/capacitance Lo/Co
Ex ia
Lo [mH]
Co [µF]
IIC
1.2
0.13
0.5
0.15
Ex approval acc. to conformity certificate
Application area
Protection type
Characteristic
É II (1) GD [Ex ia] IIC/IIB
≤ 25.4 V
≤ 96 mA
≤ 678 mW
250 V
Trapezoidal
negligibly small
IIB
13.0
0.31
0.5
0.91
trapezoidal
negligibly small
IIB
5.0
1.6
1.0
2.5
SIL 3 acc. to EXIDA FMEDA
Indication
Switching state
yellow
Mechanical data
Electrical connection
TÜV 06 ATEX 2977 X
0.5
0.42
IIB
5.0
0.75
Declaration
≤ 500 Hz
Approvals and declarations
Ex approval acc. to conformity certificate
Device designation
Max. output voltage Uo
Max. output current Io
Max. output power Po
Rated voltage
Characteristic
Internal inductance/capacitance Li/​Ci
External inductance/capacitance Lo/Co
IIC
2.0
0.3
Environmental Conditions
Ambient temperature
Storage temperature
Test voltage
MTTF
0.5
0.14
Characteristic
Internal inductance/capacitance Li/​Ci
External inductance/capacitance Lo/Co
40 mA
U1=24 V
U2=15 V
Response characteristic
Limit frequency
IIC
1.0
0.11
negligibly small
-25…+70 °C
-40…+80 °C
2.5 kV
363 years acc. to SN 29500 (Ed. 99)
40 °C
Terminal cross-section
Housing material
Mounting instruction
Protection class
Flammability class acc. to UL 94
Dimensions
Spring terminal made of Beryllium-​
Bronze
1.5 mm2
Polycarbonate/ABS
for DIN rail
IP20
V-0
18 x 112 x 110 mm
Approval | Certification
ATEX, IECEx, TR CU, NEPSI
Interface technology
Type
Ident no.
2.0
0.34
≤ 17.6 V
≤ 96 mA
≤ 678 mW
Trapezoidal
negligibly small
IIB
13.0
0.47
2.0
1.1
TÜV 06 ATEX 2979 X
II 3 G
Ex nA [nL] IIC / IIB T4
trapezoidal
[email protected] ■ www.turck.com ■ Edition I/2014
459
Interface Technology in Modular Housing
DIN rail mounted devices of the IME series
Solonoid driver, 2‑channel
Features
+6
1
U1: 24 VDC
U2: 15 VDC
2
+5
U1
U2
+2
8+
1
YE
–4
+3
▪▪ ATEX, IECEx, TR CU, NEPSI
▪▪ Installation in zone 2
▪▪ Solonoid driver, 2‑channel, ​(intrinsical‑
7–
24 VDC
<3W
U1
U2
10 +
2
YE
–1
1
9–
ly safe power source)
▪▪ 2 output values selectable per channel
▪▪ LED status indication
▪▪ Complete galvanic isolation
2
The 2‑channel solonoid driver ​IME-DO22Ex/L provides limited current ​and volt‑
age at the intrinsically safe ​output. This
enables them to be used d
​ irectly for sup‑
plying loads in the Ex ​area.
potentially
explosive
atmospheres​terms of their no-load voltage (​see out‑
caused by dust or gas, provided they​ put curve on next page). They ​are adapt‑
comply with the applicable regulations.​ ed to the valves of different m
​ anufactur‑
Typical applications are the control of Ex​ ers. The loads are actuated ​by applying
i pilot valves as well as the supply of ​dis‑ the operating voltage.
plays and transmitters.
Within the area of applicability of the E​ u‑
A yellow LED indicates the switching​
ropean directive 94/9/EC (ATEX) it is ​per‑ The output values of the two c​onnec‑ state of the associated output.
mitted to operate connected loads in​ tions U1 and U2 per channel ​differ in
460
Hans Turck GmbH & Co. KG ■ Tel. +49 208 49 52-0 ■ Fax +49 208 49 52-264
Interface Technology in Modular Housing
DIN rail mounted devices of the IME series
Technical data
IME-DO-22EX/L
7541195
Internal inductance/capacitance Li/​Ci
External inductance/capacitance Lo/Co
Power supply
Nominal voltage
Power consumption
24 VDC loop-powered
≤ 3 W
Inputs
0-signal
1-signal
Voltage input
Input delay
0…5 VDC
20…30 VDC
max. 30 VDC
≤ 0.4 ms
Outputs
Output current
Output voltage
Output voltage
Output curve
Ex nL
Lo [mH]
Co [µF]
40 mA
U1=24 V
U2=15 V
Response characteristic
Limit frequency
Ex ia
Lo [mH]
Co [µF]
IIC
0.68
0.067
0.5
0.076
Max. output voltage Uo
Max. output current Io
Max. output power Po
Characteristic
Internal inductance/capacitance Li/​Ci
External inductance/capacitance Lo/Co
Ex ia
Lo [mH]
Co [µF]
IIC
1.2
0.13
0.5
0.15
Ex approval acc. to conformity certificate
Application area
Protection type
Characteristic
TÜV 06 ATEX 2977 X
É II (1) GD [Ex ia] IIC/IIB
≤ 25.4 V
≤ 96 mA
≤ 678 mW
250 V
Trapezoidal
negligibly small
IIB
13.0
0.31
IIC
2.0
0.3
0.5
0.42
IIB
5.0
0.75
0.5
0.91
trapezoidal
negligibly small
IIB
5.0
1.6
1.0
2.5
Declaration
SIL 3 acc. to EXIDA FMEDA
Indication
Switching state
yellow
Environmental Conditions
Ambient temperature
Storage temperature
Test voltage
MTTF
Mechanical data
Electrical connection
≤ 500 Hz
Approvals and declarations
Ex approval acc. to conformity certificate
Device designation
Max. output voltage Uo
Max. output current Io
Max. output power Po
Rated voltage
Characteristic
Internal inductance/capacitance Li/​Ci
External inductance/capacitance Lo/Co
0.5
0.14
Characteristic
Internal inductance/capacitance Li/​Ci
External inductance/capacitance Lo/Co
Ex nL
Lo [mH]
Co [µF]
IIC
1.0
0.11
negligibly small
-25…+70 °C
-40…+80 °C
2.5 kV
363 years acc. to SN 29500 (Ed. 99)
40 °C
Terminal cross-section
Housing material
Mounting instruction
Protection class
Flammability class acc. to UL 94
Dimensions
Spring terminal made of Beryllium-​
Bronze
1.5 mm2 / 0.75 ​mm2 с flexible
Polycarbonate/ABS
for DIN rail
IP20
V-0
18 x 112 x 110 mm
Approval | Certification
ATEX, IECEx, TR CU, NEPSI
Interface technology
Type
Ident no.
2.0
0.34
≤ 17.6 V
≤ 96 mA
≤ 678 mW
Trapezoidal
negligibly small
IIB
13.0
0.47
2.0
1.1
TÜV 06 ATEX 2979 X
II 3 G
Ex nA [nL] IIC / IIB T4
trapezoidal
[email protected] ■ www.turck.com ■ Edition I/2014
461
Distributed interface modules in IP67 housing
For direct field installation, IMC series
Solonoid driver, 1‑channel
Features
▪▪ ATEX, IECEx, TR CU
▪▪ Installation in zone 2/22
▪▪ Valve control module with
M12 x 1 connectors, 1‑channel
The device must be protected against​
mechanical load on connector and ​housing when mounted in zone 2 or 22. ​For
this, use the TURCK cover plate IMC-​SG
(ident no. 7560016).
Zone 2/22: Do not disconnect, when live!
IMC-DO-11Ex/L
The device is loop-powered. External​
power supply is not required.
Pin assignment female M12
(intrinsi­cally safe end)
2
2
3
490
Typical applications are the control of Ex​
i pilot valves and pilot lights as well as ​the
supply of transmitters.
Pin assignment male M12
The 1‑channel solonoid driver ​IMC-DO11Ex/L features an intrinsically ​safe output circuit. The device can be m
​ ounted in
zone 2.
▪▪ Complete galvanic isolation
▪▪ Protection class IP67
4
1
1
5
5
3
4
Hans Turck GmbH & Co. KG ■ Tel. +49 208 49 52-0 ■ Fax +49 208 49 52-264
Distributed interface modules in IP67 housing
For direct field installation, IMC series
Technical data
IMC-DO-11EX/L
7560008
Power supply
Nominal voltage
Power consumption
24 VDC loop-powered
≤ 1.3 W
Inputs
0-signal
1-signal
Voltage input
Current input
Input delay
Max. values:
Max.output voltage Uo
Max. output current Io
Max. output power Po
Characteristic
Internal inductance/capacitance Li/​Ci
External inductance/capacitance Lo/Co
Ex nL
Lo [mH]
Co [nF]
0…5 VDC
20…30 VDC
max. 30 VDC
45 mA
≤ 1 ms
Outputs
Output circuits
Output current
Output voltage
Output curve
intrinsically safe acc. to EN 60079
40 mA
24 V
Response characteristic
Limit frequency
Measuring accuracy
≤ 500 Hz
≤ 0.1 % of full scale
Approvals and declarations
Ex approval acc. to conformity certificate
Device designation
Max. values:
Max. output voltage Uo
Max. output current Io
Max. output power Po
Rated voltage
Characteristic
Internal inductance/capacitance Li/​Ci
External inductance/capacitance Lo/Co
Ex ia
Lo [mH]
Co [nF]
IIC
0.75
60
0.5
70
Characteristic
Internal inductance/capacitance Li/​Ci
External inductance/capacitance Lo/Co
Ex nL
Lo [mH]
Co [nF]
IIC
4.0
74
0.5
130
Ex approval acc. to conformity certificate
Application area
Protection type
TÜV 07 ATEX 553265
É II (1) GD [Ex ia] IIC/IIB
M12 female connection: 1+3
≤ 27 V
≤ 95 mA
≤ 674 mW
250 V
Trapezoidal
negligibly small
IIB
2
310
IIC
4.0
74
0.5
130
M12 female connection: 1+3
≤ 27 V
≤ 95 mA
≤ 674 mW
trapezoidal
negligibly small
IIB
20
490
5
630
max.Output voltage Uo
max. Output current Io
max. Output power Po
Approval
≤ 27 V
≤ 95 mA
≤ 674 mW
SIL3 acc. to EXIDA FMEDA
Indication
Switching state
yellow
Environmental Conditions
Ambient temperature
Storage temperature
Test voltage
MTTF
-25…+70 °C
-40…+80 °C
2.5 kV
326 years acc. to SN 29500 (Ed. 99)
40 °C
Mechanical data
Tightening torque
Electrical connection
Housing material
Mounting instruction
Protection class
Dimensions
3.5 Nm
M12 flange connection
Polycarbonate/ABS
for panel
IP67
32 x 100 x 25 mm
Approval | Certification
ATEX, IECEx, TR CU
Interface technology
Type
Ident no.
0.5
450
Trapezoidal
negligibly small
IIB
20
490
5
630
TÜV 07 ATEX 553647 X
II 3G, II 3D
Ex nA [nL] IIC/IIB T4 or rather Ex tD ​
A22 IP67 T86 °C
[email protected] ■ www.turck.com ■ Edition I/2014
491
Distributed interface modules in IP67 housing
For direct field installation, IMC series
Solonoid driver, 1‑channel
Features
▪▪ ATEX, IECEx, TR CU
▪▪ Installation in zone 2/22
▪▪ Valve control module with
M12 x 1 connectors, 1‑channel
The device must be protected against​
mechanical load on connector and ​housing when mounted in zone 2 or 22. ​For
this, use the TURCK cover plate IMC-​SG
(ident no. 7560016).
Zone 2/22: Do not disconnect, when live!
IMC-DO-11Ex/L
The device is loop-powered. External​
power supply is not required.
Pin assignment female M12
(intrinsi­cally safe end)
2
2
3
490
Typical applications are the control of Ex​
i pilot valves and pilot lights as well as ​the
supply of transmitters.
Pin assignment male M12
The 1‑channel solonoid driver ​IMC-DO11Ex/L features an intrinsically ​safe output circuit. The device can be m
​ ounted in
zone 2.
▪▪ Complete galvanic isolation
▪▪ Protection class IP67
4
1
1
5
5
3
4
Hans Turck GmbH & Co. KG ■ Tel. +49 208 49 52-0 ■ Fax +49 208 49 52-264
Distributed interface modules in IP67 housing
For direct field installation, IMC series
Technical data
IMC-DO-11EX/L
7560008
Power supply
Nominal voltage
Power consumption
24 VDC loop-powered
≤ 1.3 W
Inputs
0-signal
1-signal
Voltage input
Current input
Input delay
Max. values:
Max.output voltage Uo
Max. output current Io
Max. output power Po
Characteristic
Internal inductance/capacitance Li/​Ci
External inductance/capacitance Lo/Co
Ex nL
Lo [mH]
Co [nF]
0…5 VDC
20…30 VDC
max. 30 VDC
45 mA
≤ 1 ms
Outputs
Output circuits
Output current
Output voltage
Output curve
intrinsically safe acc. to EN 60079
40 mA
24 V
Response characteristic
Limit frequency
Measuring accuracy
≤ 500 Hz
≤ 0.1 % of full scale
Approvals and declarations
Ex approval acc. to conformity certificate
Device designation
Max. values:
Max. output voltage Uo
Max. output current Io
Max. output power Po
Rated voltage
Characteristic
Internal inductance/capacitance Li/​Ci
External inductance/capacitance Lo/Co
Ex ia
Lo [mH]
Co [nF]
IIC
0.75
60
0.5
70
Characteristic
Internal inductance/capacitance Li/​Ci
External inductance/capacitance Lo/Co
Ex nL
Lo [mH]
Co [nF]
IIC
4.0
74
0.5
130
Ex approval acc. to conformity certificate
Application area
Protection type
TÜV 07 ATEX 553265
É II (1) GD [Ex ia] IIC/IIB
M12 female connection: 1+3
≤ 27 V
≤ 95 mA
≤ 674 mW
250 V
Trapezoidal
negligibly small
IIB
2
310
IIC
4.0
74
0.5
130
M12 female connection: 1+3
≤ 27 V
≤ 95 mA
≤ 674 mW
trapezoidal
negligibly small
IIB
20
490
5
630
max.Output voltage Uo
max. Output current Io
max. Output power Po
Approval
≤ 27 V
≤ 95 mA
≤ 674 mW
SIL3 acc. to EXIDA FMEDA
Indication
Switching state
yellow
Environmental Conditions
Ambient temperature
Storage temperature
Test voltage
MTTF
-25…+70 °C
-40…+80 °C
2.5 kV
326 years acc. to SN 29500 (Ed. 99)
40 °C
Mechanical data
Tightening torque
Electrical connection
Housing material
Mounting instruction
Protection class
Dimensions
3.5 Nm
M12 flange connection
Polycarbonate/ABS
for panel
IP67
32 x 100 x 25 mm
Approval | Certification
ATEX, IECEx, TR CU
Interface technology
Type
Ident no.
0.5
450
Trapezoidal
negligibly small
IIB
20
490
5
630
TÜV 07 ATEX 553647 X
II 3G, II 3D
Ex nA [nL] IIC/IIB T4 or rather Ex tD ​
A22 IP67 T86 °C
[email protected] ■ www.turck.com ■ Edition I/2014
491