Download Stat Transmitter

efficient
safe
versatile
Stationary Transmitter
When the circumstances do not allow for
the use of a portable Transmitter, a stationary one can be implemented with the
established technology from CattronTheimeg.
When the operator can only operate from
the control console in his crane or another
vehicle, the stationary transmitter is of
great use. The commands from the control
console are carried through a cable to the
transmitter which in turn makes the radio
connection to the receiver. The operator is
in less danger when working in hazardous
areas such as furnaces or incinerators.
The stationary transmitter is also implemented in difficult circumstances when the
antenna for example has to be placed at
great height. The operation is carried out
from a control console which allows the
operator an overall view of the working
area and offers the complete advantages of
a Radio Remote Control System.
Data transmission from machine to machine or the interlocking system of a
conveyor belt is another good example of
further application areas. The movement of
the first machine is dependent on the output state of the second one, whose data is
transmitted through the stationary transmitter.
Binary data, such as the water level, can
also be transmitted.
EXPERIENCE
-
QUALITY
-
SERVICE
-
WORLDWIDE
Technical data and general information
Stationary Transmitter in TC 100 and TC 200-Technic
Frequency range:
410 – 490 MHz (70 cm
range)
FM (frequency modulation)
PPM
4800 Bd.
70 ms (at 4800 Hz)
d>=6 (message check)
10 mW
Micro-processor system with
double cut off of the
main relays in the receiver
Modulation:
Signal coding:
Transmission data rate.
Typical response time:
Hamming distance:
Transmission power:
Digital electronics:
Receiver sensibility:
Operating temperature:
Receiver relays:
Protection class:
Receiver operating voltage:
Operating range:
Dimensions WxHxD:
<= 1 µV @ 10 dB (S/(S+N+D))
-20°C to +60°C
output relays:
max. 250 V AC/5A (ohmic load)
IP 65
48, 115, 230 V AC, 50/60 Hz
or 12, 24, 48 V DC
up to 200 m (standard)
up to 5 km with special RF-units
275 x 195 x 70 mm
OPTION
Stationary Transmitter with Operating Buttons
Receiver in TC 100 or TC 200-Technic
TC 200-Receiver
TC 100-Receiver
•
AC power supply unit 48, 115, 230 V AC – 50/60 Hz
•
DC power supply unit 12, 24, 48 V DC
•
Synthesizer RF module with autoscan-function
•
500 ms passive emergency stop time
•
2 redundant passive emergency stop circuits
•
Relays capacity 250 V AC / 5 A
•
frequency setting via DIP-switches or autoscan
•
PC-interface for diagnosis
•
System-address with parity (16 Bit)
•
Cable gland connector as standard
•
Protection class: IP 65
•
Dimensions WxHxD: 200 x 200 x 70 mm
•
2-channel dual micro processor system with internal
communication and mutual monitoring
•
AC-power supply unit 48 - 230 V AC – 50/60 Hz
•
DC- power supply unit 12 - 48 V DC
•
Synthesizer RF module with autoscan-function
•
500 ms passive emergency stop time
•
3 redundant passive emergency stop circuits
•
Relays capacity 250 V AC / 5 A
•
Status display: Master 8 LEDs, Slave 4 LEDs
•
Standard frequency setting via DIP-switches
•
PC-interface for free configuration and diagnosis
•
4 slots for output cards
•
Redundant address
•
Cable gland connector as standard
•
Protection class: IP 65
•
Dimensiosn WxHxD: 200 x 320 x 160 mm
UNITED STATES
Cattron-Theimeg International Inc.
58 West Shenango Street
USA Sharpsville,
Pennsylvania 16150
Phone:
001-724-962-3571
Fax:
001-724-962-4310
[email protected]
CANADA
Cattron-Theimeg Canada Ltd.
150 Armstrong Avenue, Units 5-6
Georgetown,
Ontario L7G 5G8
Phone: 001-905-873-9440
Fax:
001-905-873-9449
[email protected]
EUROPE
Cattron-Theimeg Europe GmbH & Co. KG
Krefelder Straße 423 – 425
D-41066 Mönchengladbach
Phone: 0049-2161-6363-0
Fax:
0049-2161-6363-100
[email protected]
SOUTH AFRICA
Cattron-Theimeg Africa (Pty.) Ltd.
25 O’Reilly Merry Road
ZA Rynfield, Benoni,
Gauteng 15444
Phone: 0027-11 425 1123
Fax:
0027-11 849 5717
[email protected]
BRASILE
Cattron-Theimeg Américas Ltda.
Rua Antonio Rodrigues de Carvahlo, 435
BR Campinas,
SP CEP 13033-220
Phone: 0055-19 3243 7803
Fax:
0055-19 243 9258
[email protected]
GREAT BRITAIN
Cattron-Theimeg UK Ltd.
Riverdene Industrial Estate, Molesey Rd.
GB Hersham,
Surrey KT12 4RY
Phone: 0044-1932-247 511
Fax:
0044-1932 220 937
[email protected]
All data serve exclusively the product description and are not to be regarded as warranted properties in the legal sense.