Download StudSensor™ L50

StudSensor ™ L50
STUD FINDER / DETECTOR DE VIGAS
EDGE FINDING / DETECCIÓN DE BORDES
Deep-Scanning Stud Finder with SpotLite® Pointer and WireWarning® Detection
The StudSensor™ L50 quickly and easily locates the edges of wood and metal studs
and joists behind walls, floors, and ceilings. Its easy-to-read display indicates stud
edges, SpotLite ® Pointer shines a beam of light on the wall to clearly identify the
target, and WireWarning® detection indicates the presence of live AC voltage.
Its patented pinch grip and contoured shape provide an easy, secure hold in either
hand, at any angle.
• StudScan mode locates the edges of wood or metal
studs up to ¾ in. (19 mm) deep
Find Stud Edges
• DeepScan mode doubles the scanning depth
to 1½ in. (38 mm) deep
®
• READY icon displays when calibration has
completed successfully
Find Wood or
Metal Studs
• Easy-to-read LCD display indicates when a stud edge
is approached
• Zircon's patented "over-the-stud" indication alerts
the user to start the scan in a new location if scanning
begins over a stud
• WireWarning® detection indicates the presence
of live, unshielded AC electrical wiring up to
2 in. (51 mm) deep
Scan Thick Walls
for Studs
WireWarning®
Detection
• SpotLite® Pointer shines an arrow-shaped light on the
wall to clearly indicate the edge of the stud
• Translucent base and illuminated "V" marker groove
for more accurate marking of stud edge location
• Rubber handle for non-slip grip
Dimensions
6.66 in. H x 2.80 in. W x 1.76 in. D (169 mm x 71 mm x 45 mm)
Depth*
Weight
45 oz. (127.2 g) without battery
Battery Type
9-V alkaline, required
WireWarning® Position Accuracy*
Typically 90-250 V at 50-60Hz within
6 in. (152 mm) of a hot, unshielded wire
in drywall
Position Accuracy*
Up to a depth of 3⁄4 in. (19 mm):
Typically within 1⁄ 8 in. (3 mm) using the dual scan
and mark procedure
Up to a depth of 1½ in. (38 mm):
Typically within 3⁄16 in. (5 mm) using the dual scan
and mark procedure
StudScan mode: Up to ¾ in. (19 mm)
DeepScan® mode: Up to 1½ in. (38 mm)
WireWarning® Depth*
In typical wall with Romex® wiring, wire can
be detected up to 2 in. (51 mm) deep
Storage Temperature
-20° to 150°F (-29° to 66°C)
Humidity
80% RH (non-condensing)
Water Resistance
Splash and water resistant, not waterproof
*NOTE: Sensing depth and accuracy can vary due to moisture, content
of materials, wall texture, paint, etc. Not recommended for use on lath
and plaster. Indoor use only.
Operating Temperature
20° to 120°F (-7° to 49°C)
©2014 DeepScan, SpotLite, StudSensor, WIreWarning, and Zircon are trademarks or registered trademarks of Zircon Corporation • C/N 2247 Rev A 05/14
Zircon Corporation | 1580 Dell Avenue | Campbell, CA 95008 | [email protected] | www.zircon.com | 408-963-4550 | 800-245-9265