Download 52538 D81 Instapak 901 - M-Line

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts
no text concepts found
Transcript
Instapak 901
®
Foam-in-Place Packaging System
Workstation and Instapak® chemical
containers not included.
Instapak 901 Foam-in-Place Packaging System
®
The Most Advanced Hand-Held
Foam Dispensing System Ever
• Economical
Built-in timers let you control the amount of material
used. A series of ten dispense times can be used to
simplify your packaging process.
• Flexible
The Instapak® 901 system can be adjusted to dispense
foam at the ideal rate for your application.
• Instapak® 901 foam output rate: 5 to 7.5 lbs/min.
• Safe
Foam output controls, built-in timers and self-diagnostic features
continually monitor system performance. All information is
reported on the console’s easy-to-read message center.
The Instapak® 901 system meets
major international product safety standards.
• Reliable
The electric pumps and self-diagnostic controls guarantee
top quality Instapak® foam.
• Simple
The all-electric Instapak® 901 system installs in minutes.
No scheduled maintenance is required.
Sealed Air® Support Services
• Operator training
• Package design and testing
• Equipment installation • Site selection assistance
Utility Requirements
Electrical Power:
The Instapak® 901 system features a patented, self-cleaning
cartridge dispenser that delivers high quality Instapak® foam.
Receptacle Type:
200-240 VAC Dedicated Circuit,
50/60 Hz, 30 Amp, Single Phase with
equal voltage from each leg to ground.
NEMA L6-30R
For important operating and safety information, please see
the “Recommendations for the Safe Use and Handling of
Instapak® Foam-in-Place Chemicals” bulletin.
Distributed by:
Protective Packaging
10 Old Sherman Turnpike
Danbury, CT 06810
203-791-3500 Fax: 203-791-3618
www.instapak.com
Our Products Protect Your Products®
Corporate Office: Sealed Air Corporation (US)
200 Riverfront Boulevard, Elmwood Park, NJ 07407 www.sealedair.com
© Reg. U.S. Pat. and TM Off. © Sealed Air Corporation (US) 2007. All rights reserved. Printed in the U.S.A.
The “9 Dot Logo” and “Sealed Air” are registered trademarks of Sealed Air Corporation (US).
D-81 Rev. 7/07