Download Troubleshooting your Bluetooth UGO

Congratulations!
You have one of the most versatile and innovative personal speakers available.
Package Contents
1.
2.
3.
4.
Speaker
2 in 1 cable for charging and playing
FM detachable antenna
Instruction sheet
Speaker Modes & Controls
The UGO Bluetooth speaker can operate in four different modes. Bluetooth mode overrides all other modes. To switch to other modes when
connected via Bluetooth you must pause or end playback from your device...
Mode 1. Bluetooth.
PAIRING INSTRUCTIONS: Turn your UGO speaker on. You will hear a beep. The light will blink alternately green and red. This indicates that
the UGO is ready to pair.
TO PAIR TO AN ANDROID PHONE
1. Open: Settings
2. Open: Wireless and Network
3. Open: Bluetooth Settings.
4. Turn: Bluetooth on if it is off.
5. Touch: Search for Devices
6. Touch and hold - UGO
7. Touch Connect.
TO PAIR TO AN I PHONE OR IPAD
1. Open: Settings
2. Turn: Bluetooth on (if it is off).
3. Touch and hold: UGO found under Devices, it will be
labeled
Not Paired
4. Touch: The word UGO - it will say Connected
TO PAIR TO A MAC OS COMPUTER
1. Open: System Preferences
2. Open: Bluetooth
3. Click: the + button to add a
Bluetooth device.
4. Select: UGO
5. Click: Continue - the computer will
Pair with the device. If asked:
The pass code is 0000
TO PAIR TO A WINDOWS OS COMPUTER
1. Open: Devices and printers
2. Click: Add a device
3. Select: UGO or Bluetooth headset
4. Click: Next
5. Input: Pass code 0000 if necessary
Mode 2. Micro SD card: Use a computer or Android phone to transfer music files to a micro SD card. Note: MP3 files work best. Insert the
Micro SD card directly into the slot on the UGO labeled SD or TF. It will click into place. Your music will begin to play automatically.
Mode 3. FM Radio. The UGO has a built in FM radio. Attach the included antenna to the UGO. Note: The 2 in 1 cable also works as an antenna
when connected to the UGO. Push the mode button until you hear static. Push the pause/play button. The UGO will automatically scan and load
all FM radio stations within range. Once it stops scanning you can switch stations by pushing the Vol. up or down buttons. To change the volume
push and hold the Vol. up or down button until the volume reaches the desired level.
Mode 4. Connect directly with supplied cable to audio device: Plug the single end of the 2 in 1 cable (mini USB plug) into the UGO speaker. The
double end of the 2 in 1 cable has a 3.5 mm headphone plug it can be inserted into any device with a corresponding 3.5 mm jack. The audio
signal will travel through this connection.
WHAT THE BUTTONS DO:
On/off button. This button turns the UGO on. Do not leave the UGO on if not in use.
Mode button. Push this button to cycle through audio modes. Note: When in Bluetooth mode the mode button does not function unless you
pause or stop playback on your device.
Pause/Play. Pauses or plays audio in every mode but Bluetooth. (use your (phone, Ipod, etc) to pause or play audio when in Bluetooth mode). In
FM Mode push once and the UGO will automatically search and load available FM radio stations. In Bluetooth mode when connected to a cell
phone this button will answer/end phone calls.
Volume up/down. Push and hold to increase or lower volume in all modes. Push once to change tracks or radio stations in SD or FM mode.
WHAT THE LIGHTS MEAN. A blinking red and green light means the UGO is ready to pair. A blinking green light means the UGO is paired
and connected and playing. A steady green light means the UGO is paired and connected but not playing. A steady red light means the UGO is
charging but turned off.
CHARGING YOUR UGO. Your UGO comes partially charged. To charge the UGO connect the 2 in 1 cable to the speaker. Connect the USB
plug on the other end of the cable to any USB port. This can be the USB port on a computer, wall adaptor or car charger. Once connected the
UGO will automatically charge. A full charge takes approximately 2 hrs. Partial charging will not affect the life of the battery. Do not store the
UGO with a dead battery.
CHARGING WHILE PLAYING. You can charge the UGO and play audio at the same time.
CARE OF YOUR UGO. Do not let the UGO come in contact with water. Do not leave it in direct sunlight or other hot place. Do not store your
UGO with a dead battery. Clean with soft cloth. Do not use harsh chemicals to clean. Do not drop or place heavy objects on the UGO. Never try
to repair or open your UGO yourself.
TECHNICAL SPECIFICATIONS
1.
Operating voltage 3.7V
2.
Charging Voltage 5V
3.
Output power 3V
4.
Speaker spec: 40mm 2.6Ω 3W
5.
6.
7.
8.
9.
10.
Battery capacity: 430 mA/H
Frequency response: 60 Hz – 18Khz
THD: <0.5%
SNR: >95dB
Size: D 60mm H 54cm
Play time is approximately 4 hours at full volume.
Troubleshooting your Bluetooth UGO
Problem:
The speaker doesn’t play
Solution
Turn the power button to ‘ON’ position.
Make sure the speaker is charged. If you are
not sure that the battery is charged attach
the charging cable to the UGO and plug the
other end into any active USB port.
If using a Micro SD card make sure that the
play/pause button is not in pause position.
Your Micro SD card is inserted into the
UGO but the music doesn’t play.
I am trying to play music and charge the
UGO at the same time but no sound comes
out.
Poor sound quality and static.
I can’t pair my device to the UGO.
If connected wirelessly check status of the
device that is connected. Make sure that the
UGO is paired – connected and that the
media is playing.
Try pressing the Mode button to switch
modes.
Try turning the power Off then back On.
Make sure the power button is in the ‘ON’
position.
Songs must be in MP3 format.
Check that the battery is charged.
Try Pressing the Pause/ Play button.
Make sure SD card is inserted with printing
up and is pushed in until you hear a click.
With all cables connected turn the UGO
power button Off and then On again.
If playing from a computer with a Mac OS
connect the charging end of the cable to a
wall adaptor. The UGO will not charge and
play from a Mac OS computer unless the
charging cable is plugged separately.
Charge the battery.
If connected via Bluetooth try using the
audio cable. The version of Bluetooth in
your device may transfer data too slowly
for good audio playback.
See instructions for the Bluetooth UGO.
There are detail instructions on how to pair
most devices. If you still cannot pair your
device contact the manufacturer of your
device for additional information.
Check that no other device is currently
paired to the UGO. Only one device can be
connected to the UGO at one time.
If the UGO is available to pair the light will
alternate between green and red. If there is
no red light shown the UGO is connected
to another device. You need to turn off the
Bluetooth function of that device or unpair it from the UGO to connect a new
device.
My Bluetooth is connected but has poor
sound quality.
My FM radio stations do not come in
clearly.
The only mode that is working is Micro SD
There are different versions of Bluetooth
technology. These (older) versions are
sufficient to use a wireless mouse or
keyboard but do not transfer data quickly
enough to play music.
You can still plug the UGO to the device
using the supplied audio cable for excellent
sound quality.
Try using the charging cable as an antenna.
Plug in normally. You can even charge the
UGO at the same time. Radio signals must
be strong for a good connection.
Remove the Micro SD card. The SD card
overrides all other functions.
Specification
Contents:
1. Generalspecification
2. Productphoto
3. PinFunctions
4. Blockdiagram
5. ExampleApplicationSchematic
6. Applicationsoftware
1. GeneralSpecification GeneralDescription
BlueCore® BC6145™ Module is a lowcost fullyfeatured ROM IC solution for Bluetooth mono headsets with
extremely low power consumption. The BC6145 module ensures increased speech clarity and improves
intelligibilitythroughspectralenhancement,withthebidirectionalnoisereductionHearandBeHeardfeature.
BC6145 module reduces the number of external components required, minimising production costs. It
includesaBluetoothradio,baseband,KalimbaDSP,DAC/ADC,switchmodepowersupplyandbatterycharger
inaQFNpackageforlowcostdesigns.
TheKalimbaDSPcoprocessorsupportsenhancedaudioapplications.A2DPstreamingenablesmusicplayback
onamonoheadset.BC6145moduleincludesCVCsinglemicrophoneechoandnoisereduction,whichreduces
headsetechoenablingtheheadsetusertobeheardmoreclearly.Alowpowerwindnoisereductionfeature
improvesintelligibilityinwindyenvironments.
1.1DeviceFeatures:
x
x
x
x
x
x
x
x
x
x
6thgeneration1micCVCaudioenhancements
HFPv1.6andHSPv1.2.
A2DPv1.2forhighqualitymonomusicstreaming
NonLinearEchoReduction(NLER)featureforlow̻costspeakerphonesandcarkits
Lowpowerconsumption:over11hourstalktimefroma120mAhrbattery
Advancedmultipointsupport:enablesaheadset
(HFP)connectionto2phonesforvoice
MultipointA2DPstreaming:enablesamonoheadset(A2DP)connectionto2A2DPsourcedevicesfor
musicplayback
Securesimplepairing,CSR'sproximitypairingandCSR'sproximityconnection 64MIPSKalimbaDSPcoprocessor
x
x
x
Highqualitymonocodecwith95dBSNRDAC
Green(RoHScompliantandnoantimonyorhalogenatedflameretardants)
Size:18mm(L)X13.5mm(W)
1.2Applications
ŶBC6145 DSPmonoheadsetsolution
ŶLowcostspeakerphonesandcarkits
BC6145Modulesupportssecuresimplepairingwhichsimplifiesthepairingprocessandmakesiteasiertouse
aBluetoothheadset.
ThedeviceincludesautocalibrationandBISTroutinestosimplifydevelopment,typeapprovalandproduction
test.
1.3DeviceDetails:(BC6145)
Radio
ŶBluetoothv3.0specificationcompliantTransmitter
Ŷ8.5dBmRFtransmitpowerwithlevelcontrolfromonchip6bitDACoveradynamicrangetypically>30dB
ŶReceiversensitivityof91dBm
Synthesiser
ŶCompatiblewithcrystals16MHzto26MHz
BasebandandSoftware
ŶSupportforBluetoothv3.0specificationwhenusingupdatedconfiguration
ŶInternalROM
Ŷ48KBofinternalRAM,enablesfullspeeddatatransfer,mixedvoice/dataandfullpiconetsupport
ŶConfigurablemonoheadsetROMsoftwaretosetupheadsetfeaturesanduserinterface
ŶHFPv1.6andHSPv1.2
ŶCSR'sproximitypairing(headsetinitiatedpairing)
ŶSupportsmSBCwidebandspeechdecoder
ŶDSPbased6thgeneration1micCVCechoandnoisecancellationforeffectivenoisecancellationunderall
conditions
ŶIntegratedamplifiersfordrivinga16speaker;noneedforexternalcomponents
ŶSupportforsingleendedspeakerterminationandlineoutput
ŶIntegratedlownoisemicrophonebias
ŶDigitalenhancementstoaddbasscutandsidetone
ŶAnalogueenhancementstosupportsingleendedspeakerdrivecapabilityandreferenceavailability
PhysicalInterfaces
ŶBattery charger with programmable current, 20mA to 150mA for lithium ion/polymer battery. Supports
externalboostchargeforuptoatotalof240mAfastchargecurrent
Ŷ2LEDdriverswithfaders
2. Productphoto 3. PinFunctions
PINName
GND
RX
PIN#
1,8,15,28,30,31,3
2,33
2
Description Groundport
PadType
VSS
UARTdatainput,activehigh.
Bidirectional with weak
internalpulldown
TX
3
UARTdataoutput,activehigh.
PIO_3
4
PIO_2
PIO_1
PIO_0
5
6
7
RESET
9
PIO_11
10
LED0
11
Bidirectionalwith
PIO[3]ischipselectforSPIflash
programmable
interface(BC6145ismaster).
strength
internal
pullup/down
Programmableinput/outputline
Bidirectionalwith programmable
strength
internal
pullup/down
Resetiflow.Inputdebouncedsomustbelow Input with weak
for>5mstocauseareset
internalpullup
Programmableinput/outputline.
Bidirectionalwith programmable
strength
internal
pullup/down
LEDdriver
Opendrainoutput
Programmableinput/outputline
Bidirectionalwithweak
internalpullup
MFB
5V
13
14
BATT
16
MOSI
17
MultiFunctionalButton
Lithium ion/polymer battery charger
input
Lithium ion/polymer battery positive
terminal.Battery
charger output and input to
switchmoderegulator
SPIdatainput
CLK
18
SPIclock
CSB
19
ChipselectforSPI,activelow
MISO
20
SPIdataoutput
SPI_EN
21
1.9V
MIC_BIAS
MIC_P
MIC_N
SPK_N
SPK_P
RF_OUT
22
23
24
25
26
27
29
Debuginterfaceinput
Highvoltageregulatoroutput
Microphonebias
Microphoneinput,positive
Microphoneinput,negative
Speakeroutput,negative
Speakeroutput,positive
SPIclock VREGENABLE_H
VDD_CHG
BAT_P
Input, with weak
internalpulldown
Bidirectional
with
weak
internal
pulldown
Bidirectional
with
weak
internal
pulldown
Bidirectional
with
weak
internal
pulldown
Input with strong
internalpulldown
VREGOUT_H
Analogue
Analogue
Analogue
Analogue
Analogue
Transmitter
output/switched
receiver
4.ApplicationBlockdiagram 5.ExampleApplicationSchematic 6. ElectricalCharacteristics
7.1 AbsoluteMaximumRatings Rating
Storagetemperature
Min
Max
40ɗ
+85ɗ
Supplyvoltage:+5V(ChargerIN)
0.4
6.5V
7.2 RecommendedOperatingConditions
OperatingCondition
Operatingtemperaturerange
Min
Max
20ɗ
+60ɗ
Supplyvoltage:+5V(ChargerIN)
Supplyvoltage:BATT
4.75V
3.0V
5.25V
4.2V
Warranty Info
Your UGO speaker is guaranteed to be free of defects for twelve (12) months from date of purchase. Simply return the defective UGO with your
original receipt for free repair or replacement. Warranty void if the speaker has been tampered with.
To obtain warranty service on your UGO product, please visit our web site:
www.ugospeakers.com
or email us directly:
[email protected]
The Bluetooth word, mark and logos are owned by Bluetooth SIG, Inc.