Download Traditional Duplex Modular Jack Plate North/South

Traditional Duplex Modular Jack Plate
North/South
Description
Traditional Duplex Modular Jack Plates are designed to permit
rapid connection of two telephones or associated equipment to
the same outside line or one of each device to separate outside
lines.
For connecting two telephones or equipment to the same line,
the color-coded wires from each jack are to be connected to
the corresponding terminals on one of the jacks along with
conductors of the incoming line.
625B3-4-xx
Product Specifications
Insertion Life: Housing: Contacts: 1000 insertions
UL 94V-0 rated
50 microinch gold plated
Electrical Specifications
Contact Pressure: Insulation Resistance: Contact Resistance: Current/voltage:
Dielectric Withstand: >100 grams
>500 megohms
<100 millohms
<140 VDC @ 2 amps
1000 VAC, RMS, 60Hz, 1 minute
For connecting one of each telephone or device to separate
outside lines, the color-coded wires from each one of the two
incoming lines are to be connected to separate jacks by matching
the color-coded wires with the color-coded terminals on each
jack.
The Duplex Modular Jack Plate may be flush mounted on a
standard outlet box. The 625MB Mounting Box may be used
where surface installation is required.
Features
Mounted with brackets or directly to the wall
Complies with Part 68 of the FCC Rules and the requirements adopted
by the ACTA
■■ Available in both standard (dry) and CorroShield® (gel) versions
■■
■■
Product Information
Suttle
Part Number
Description
625B3-4-xx
4/4 - Conductor, screw terminals, USOC wiring
625B3-4-xxRC
4/4 - Conductor, screw terminals, USOC wiring, CorroShield®
625B3E4-xx
4/4 - Conductor, screw terminals, trap door, USOC wiring
625B3-6-xx
6/6 - Conductor, screw terminals, USOC wiring
625B3E6-xx
6/6 - Conductor, screw terminals, trap door, USOC wiring
625B3-8-50
8/8 - Conductor, screw terminals, keyed/non-keyed, USOC wiring
635B68-50
1) 8 - Conductor, screw terminals, non-keyed, RJ31X, shorting bar (1&4, 5&8)
2) 4 - Conductor, screw terminals, trap door, USOC wiring
635B68JP-50
1) 6 - Position, 4 - conductor, modular jack, RJ31X, shorting bar (1&4, 5&8)
2) 8 - Position, 8 - conductor, modular jack, USOC wiring
RJ11 and RJ45 are bridged. RJ45 dust plug included
697B68H-50
1) 8 - Position, 6 - conductor, non-keyed
2) 8 - Position, 8 - conductor, keyed
Screw terminals, USOC wiring
Colors (-xx): (-44) Ash, (-50) Ivory, (-52) Electrical Ivory, (-85) White - Not every color is available for every configuration
Gelguard™ gel in the CorroShield® products, is a nonhazardous mixture per OSHA’s Hazard Communications Standard (29 CFR 1910.1200).
An MSDS is not required. A product safety bulletin is available upon request.
Traditional Duplex Modular Jack Plate
North/South
635B68JP-50 wiring diagram
Specifications subject to change without notice. Copyright 2014.
1821014
1001 East Highway 212 • Hector, MN USA 55342 • suttlesolutions.com
Toll Free: 1 (800) 852-8662 • Local: (320) 848-6711 • Fax: (320) 848-6218