Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Mains electricity wikipedia , lookup
Alternating current wikipedia , lookup
Ground (electricity) wikipedia , lookup
Electrical connector wikipedia , lookup
Phone connector (audio) wikipedia , lookup
Earthing system wikipedia , lookup
Overhead power line wikipedia , lookup
Skin effect wikipedia , lookup
Aluminium-conductor steel-reinforced cable wikipedia , lookup
Traditional Duplex Modular Jack Plate North/South Description Traditional Duplex Modular Jack Plates are designed to permit rapid connection of two telephones or associated equipment to the same outside line or one of each device to separate outside lines. For connecting two telephones or equipment to the same line, the color-coded wires from each jack are to be connected to the corresponding terminals on one of the jacks along with conductors of the incoming line. 625B3-4-xx Product Specifications Insertion Life: Housing: Contacts: 1000 insertions UL 94V-0 rated 50 microinch gold plated Electrical Specifications Contact Pressure: Insulation Resistance: Contact Resistance: Current/voltage: Dielectric Withstand: >100 grams >500 megohms <100 millohms <140 VDC @ 2 amps 1000 VAC, RMS, 60Hz, 1 minute For connecting one of each telephone or device to separate outside lines, the color-coded wires from each one of the two incoming lines are to be connected to separate jacks by matching the color-coded wires with the color-coded terminals on each jack. The Duplex Modular Jack Plate may be flush mounted on a standard outlet box. The 625MB Mounting Box may be used where surface installation is required. Features Mounted with brackets or directly to the wall Complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA ■■ Available in both standard (dry) and CorroShield® (gel) versions ■■ ■■ Product Information Suttle Part Number Description 625B3-4-xx 4/4 - Conductor, screw terminals, USOC wiring 625B3-4-xxRC 4/4 - Conductor, screw terminals, USOC wiring, CorroShield® 625B3E4-xx 4/4 - Conductor, screw terminals, trap door, USOC wiring 625B3-6-xx 6/6 - Conductor, screw terminals, USOC wiring 625B3E6-xx 6/6 - Conductor, screw terminals, trap door, USOC wiring 625B3-8-50 8/8 - Conductor, screw terminals, keyed/non-keyed, USOC wiring 635B68-50 1) 8 - Conductor, screw terminals, non-keyed, RJ31X, shorting bar (1&4, 5&8) 2) 4 - Conductor, screw terminals, trap door, USOC wiring 635B68JP-50 1) 6 - Position, 4 - conductor, modular jack, RJ31X, shorting bar (1&4, 5&8) 2) 8 - Position, 8 - conductor, modular jack, USOC wiring RJ11 and RJ45 are bridged. RJ45 dust plug included 697B68H-50 1) 8 - Position, 6 - conductor, non-keyed 2) 8 - Position, 8 - conductor, keyed Screw terminals, USOC wiring Colors (-xx): (-44) Ash, (-50) Ivory, (-52) Electrical Ivory, (-85) White - Not every color is available for every configuration Gelguard™ gel in the CorroShield® products, is a nonhazardous mixture per OSHA’s Hazard Communications Standard (29 CFR 1910.1200). An MSDS is not required. A product safety bulletin is available upon request. Traditional Duplex Modular Jack Plate North/South 635B68JP-50 wiring diagram Specifications subject to change without notice. Copyright 2014. 1821014 1001 East Highway 212 • Hector, MN USA 55342 • suttlesolutions.com Toll Free: 1 (800) 852-8662 • Local: (320) 848-6711 • Fax: (320) 848-6218