Download Cable Chauffant Auto..

SELF LIMITING HEATING CABLE
Withstands 250°C*
ESR
ESR--SH
SH--BOT®
ELECTRICAL HEATING TAPE FOR PROCESS HEATING OR TEMPERATURE MAINTENANCE OF PIPEWORK AND
VESSELS WHERE HIGH TEMPERATURE WITHSTAND IS REQUIRED
The ESR-SH-BOT cable is an industrial grade, self-regulating heating tape that can be used for applications
ranging from process heating or maintenance of temperatures up to 200°C.
It can be cut to length on site and exact piping lengths can be matched without any complicated design
considerations.
ESR-SH-BOT is used where high temperatures are required (up to 200°C) or where the heater must be capable
of withstanding high exposure temperatures (up to 250°C* un-energized / 240°C only in hazardous areas).
Its self-regulating characteristics improve safety and reliability. ESR-SH-BOT will not overheat or burnout.
The installation of ESR-SH-BOT heating tape is quick and simple and requires no special skills or tools.
Termination, splicing and power connection components are all provided in convenient kits.
Fluoropolymer outerjacket over nickel plated braid provides additional protection where corrosive chemical
solutions or vapours may be present.
DESCRIPTION
1.
2.
3.
4.
5.
Nickel Plated Copper Bus wires 1.1mm²
Semi-conductive self-limiting matrix
Fluoropolymer jacket
Nickel copper braid
Optional outerjacket
Reference
Designation
Power
Dimension
ESR-SH-BOT-15
Self Limiting Cable - Super High temp. 15 W/m
15 W/m at 10°C 12,20 X 5,2 (mm)
ESR-SH-BOT-30
Self Limiting Cable - Super High temp. 30 W/m
30 W/m at 10°C 12,20 X 5,2 (mm)
ESR-SH-BOT-45
Self Limiting Cable - Super High temp. 45 W/m
45 W/m at 10°C 12,20 X 5,2 (mm)
ESR-SH-BOT-60
Self Limiting Cable - Super High temp. 60 W/m
60 W/m at 10°C 12,20 X 5,2 (mm)
ESR-SH-BOT-75
Self Limiting Cable - Super High temp. 75 W/m
75 W/m at 10°C 12,20 X 5,2 (mm)
90 W/m at 10°C 12,20 X 5,2 (mm)
ESR-SH-BOT-90 Self Limiting Cable - Super High temp. 90 W/m
TECHNICAL DATASHEET
Nominal Voltage:
230V / 110V on demand
Maximum temperature (energised):
200°C (392°F)
Max permissible exposure temp.
250°C (240°C in hasardous area)
Minimum installation temp.
–40°C
Temperature classification
75 & 90W/m = T2 (300°C)
15 - 60W/m = T3 (200°C)
Minimal Bending Radius:
30 mm
Max resistance of protective braiding:
18.20 Ω/km
Weight:
154 kg/km
QUALIFICATIONS PRODUITS
Certifications CE
ELTRACE - 12, rue des frères Lumière - F-77290 - Mitry Mory - France - Tel: +33 (0)1 64 62 04 40 - Fax: +33 (0) 1 64 62 00 54 - www.eltrace.com - [email protected]
Dans le soucis d’améliorer ses performances, ELTRACE se réserve le droit de modifier les caractéristiques sans notification préalable - 20140317 Cable chauffant autorégulant
CIRCUIT LENGTH *
DESIGNATION
START UP TEMP. (°C) LONGUEUR MAXI SELON CALIBRE (m)
ESR-SH-BOT-15
ESR-SH-BOT-30
ESR-SH-BOT-45
ESR-SH-BOT-60
ESR-SH-BOT-75
ESR-SH-BOT-90
16A
20A
32A
-20
108
136
-
0
120
150
-
10
126
154
-
-20
70
88
-
0
78
96
-
10
82
102
-
-20
52
66
88
0
58
74
-
10
62
78
-
-20
42
52
76
0
46
58
76
10
50
62
-
-20
36
44
70
0
40
48
78
10
42
52
82
-20
30
36
58
0
32
40
64
10
34
42
68
* For use with Type C circuit breakers
CONDITIONNEMENT
Standard length : 500m / 100m
PRINTING
ACCESSORIES
Référence
No-ATEX
ATEX
Boite de Jonction
ELBE-3, ELBE-6, ELBE-8, ELBE-10
ELBA-5-e, ELBA-6-e
ELBA-4-d, ELBA-6-d
Support de Boîte /
Support de Thermostat
ELSP-x, ELSP-P1/F, ELSP-P2/F
ELSP-2, ELSP-3, ELSP-4, ELSP-5,
ELSP-PU
Thermostat
ELTE-x,
ELTH-A2, ELTH-A3, ELTH-A4
ELTH-Athf-Ex
ELBSTW
Adhésif de Fixation
ELAA
ELTV
ELAA
ELTV
Sortie de Calorifuge
ELSC, ELSC-E
ELSC-E
Etiquettes de repérage
ELET
ELET
Raccordement
ELTRACE - 12, rue des frères Lumière - F-77290 - Mitry Mory - France - Tel: +33 (0)1 64 62 04 40 - Fax: +33 (0) 1 64 62 00 54 - www.eltrace.com - [email protected]
Dans le soucis d’améliorer ses performances, ELTRACE se réserve le droit de modifier les caractéristiques sans notification préalable - 20140317 Cable chauffant autorégulant