Download Inset Perimeter Light

Inset Perimeter Light
This newly redesigned Inset perimeter light is the latest addition to the FEC Heliports line of high quality
LED lights. Perimeter lights are one of the most important safety features on your heliport. They are
used to mark and illuminate the FATO and TLOF as well as to help the pilot locate the pad and safely
land during night operations and inclement weather conditions. The Inset light is used in place of an
elevated heliport perimeter light at locations where the lights are frequently knocked down by aircraft and
or maintenance vehicles. These lights are strong enough to drive over.
Technical Details:
Operating voltage:
Maximum Power
Consumption:
Operating temperature:
Operating LED Lifespan:
Light Source:
Key Features:
120V to 277V, 50/60Hz
6 watts, .2 amps @ 120V
6 watts, .1 amps @ 277V
- 13F to 122F
- 25C to +50C
Rated at 50,000 hours
Omni-directional LED Lamp
3x Osram OSLONTM SSL 150O LEDs
Average power consumption 3.5W
350mA constant current supply
2"(50mm) diameter aluminum circuit
RoHS and 94VO compliant
Optional:
Standard Colors:
HP0571F
HP0572F
HP0573F
HP0574F
NVG Compatible:
HP0771F
True Green (528nm)
Blue (470nm)
White 6000K
Yellow/Amber (590nm)
3 True Green LEDs w/ 2 IR LEDs
(IR LEDs 850nm)
Clear lens provided with IR LED lights to help with night
operations. The IR LEDs can not pass through colored
lens.
- High-visibility yellow cast aluminum body
suitable for the harshest environments
- Prewired for quick and easy installations
Standards/Certification:
- CAP 437
- ICAO Annex 14
- FAA & CAA
- UL1598
- ETL
Physical Characteristics:
Light Fixture:
Dimensions:
Height
Outside Diameter
Inside Diameter
Materials:
Lens
Casting
Powder coat
Notes:
5 inches(127mm)
10 inches(254mm)
4 inches(101.6mm)
Tempered Glass
356 T6 Aluminum Alloy
SW NL YELLOW PYS8-C8289
All machining on the Aluminum casting
is done in house by FEC Heliports
Shipping weight:
4lbs.
Mounting Can:
Dimensions:
Height
Outside Diameter
Inside Diameter
Materials:
Casting
Notes:
6-5/8 inches(168.27mm)
11 inches(279.4mm)
8-1/2 inches(215.9mm)
356 T6 Aluminum Alloy
All machining on the Aluminum casting
is done in house by FEC Heliports
Shipping weight:
6lbs.
Replacement Kits/Parts:
Kits:
HP0560F
HP0561F
HP0568F
HP0569F
HP0760F
Green LED board with Driver
White LED board with Driver
Yellow/Amber LED board with Driver
Blue LED board with Driver
Green/IR LED board with Driver
Lens:
HP0609-1
HP0609-2
HP0609-3
HP0609-4
Green
White
Yellow/Amber
Blue
Misc. Parts:
HP0575
HP0578
HP0595
HP0596
HP0599
HP0606
O-Ring
8-32 Flat Head Socket Cap Screw
Lid
Lid Gasket
Inset Light Mounting Can
Mounting Can Gasket
Mounting Notes:
- Set can in form so finished grade and the
top of the mounting can are even.
- Use watertight conduit and conduit fittings
to rough in power source wiring to
mounting cans.
- Mask / cover topside opening to prevent
debris from entering the Mounting Can.
General Notes:
- After installation the lens is 1/2 inches
(12.7mm) above grade
- Light fixture outside diameter is 10 inches
(254mm) by 5 inches(127mm) in depth
- Mounting can outside diameter is 11 inches
(279.4mm) by 6 5/8 inches(168.275mm)
in depth