Download Vibration and Temperature Monitoring System

CLASS 9300 TYPE VT
Vibration and Temperature
Monitoring System
Industrial Supply
Featuring SPIN-DOCTOR™ Toolbox Network Configuration
Software and SPIN-DOCTOR Wizard Web Service Data Collector
Reduce unscheduled downtime and costly repairs
with early warning of potentially damaging
vibration or temperature conditions
The Class 9300 Type VT Vibration and Temperature Monitoring System
reduces the cost and complexity of monitoring the condition of simple
rotating machines, such as motors, pumps and fans. The system measures
a vibration and surface temperature to detect conditions that indicate
mechanical imbalance, misalignment, bearing wear or blocked ventilation.
Stand-alone Mode (above):
Module with sensor
Network Mode: View data
from a computer
When used in Network Mode, the system allows monitoring from a central
location to improve route-based data collection that is often impractical or
unsafe for remote equipment. In either Stand-alone or Network Mode, the
system facilitates the correction of problems before malfunctions occur.
Stand-alone Mode
Network Mode
A single sensor is glued or stud mounted to the
machine. A sensor cable is connected to the
module, which may be mounted up to 300 ft
from the sensor. LEDs on the module indicate
the cause and severity of vibration, temperature
or bearing alarm conditions. Alarm conditions
activate an output signal for use with indicating
beacons, relays and PLCs to provide remote
indication of alarm status.
A computer interface card installs easily in a
host computer enabling the SPIN-DOCTOR
Toolbox Network Configuration Software to
monitor up to 54 modules on a 5000 ft network.
The SPIN-DOCTOR Wizard Web Service Data
Collector logs temperature, overall vibration and
spectrum data in a database format for display
in a standard Web browser.
■ Simple installation. Sensors adhere easily to
a machine’s surface while the module mounts
quickly with two screws. The installation guide
includes drawings illustrating sensor
installation and alarm set-up.
■ Simple set-up. Users may select default
vibration threshold levels based on ISO
10816 published standards or choose custom
levels that are based on equipment history.
■ Easy to operate and use. With a touch of a
button, the user can establish the baseline
vibration spectrum. Moreover, the patented
algorithm performs all initial bearing
assessments. Easy to read LED flash
patterns located on the module label aid in
troubleshooting alarm conditions.
■ Standard wiring practices. The computer
interface card installs in minutes, and
network cable installation conforms to
common electricians’ wiring practices.
■ Simple set-up. Network Mode operation
requires minimal computer or network
expertise. Users just point, click or fill in the
blank with easy to follow, set-up wizards.
■ Easy to operate and use. Analysts select
default vibration levels or set detailed custom
thresholds based on experience. Local
personnel monitor the alarm status from a
central computer and can receive instant,
online analysis and troubleshooting
assistance from the analysts via the Internet.
■ Easy to access. Open architecture allows for
easy integration into existing building
management or equipment monitoring
systems.
CLASS 9300 TYPE VT
Vibration and Temperature
Monitoring System
Ordering Information
Mounting/Network Accessories
6XR93 Mini Style Receptacle, 5-Pin Male + 36" Pigtail
6XR94 Replacement Sensor Accelerometer + Temperature
Stand-alone Mode
The Stand-alone kit (6XT14) includes the following components:
■ Processing module with removable cover; 6-position sensor
terminal block and 5-position network terminal block
6XR95 Mounting Pad Adhesive–Individual Packets
6XR96 Sensor Housing, Hazardous Location
6XR97 Hand-Held (portable) Reference Vibration
Calibration Exciter
■ Signal cable with connector (15 ft)
■ Vibration and temperature sensor
■ Accessory packet; 1/4-28 UNF integral stud mounting pad,
2 grommets and adhesive packet
6XR98 Replacement Sensor Cable with Molded Connector
6XR99 Sensor Cable, 100 ft + Connector One End
■ Configuration utilities software CD; network users guide,
SPIN-DOCTOR Toolbox Network Configuration Software,
Interface card software, SPIN-DOCTOR Wizard Web
Service Data Collector software, network design tool and
adhesive manufacturer’s MSDS
6XT01 Sensor Cable, 300 ft + Connector One End
6XT02 Sensor Cable, 20 ft + Connector One End
6XT03 Sensor Cable, 50 ft + Connector One End
6XT22 Standard Network Cable, Orange, 500 ft Spool
■ Module installation instructions
6XT16 Direct Burial Jacket Cable, Black, 500 ft Spool
6XT17 5-Wire Network Cable Assembly + Connectors, 100 ft
6XT18 5-Wire Network Cable Assembly + Connectors, 10 ft
6XT19 5-Wire Network Cable Assembly + Connectors, 20 ft
6XT20 5-Wire Network Cable Assembly + Connectors, 50 ft
6XT21 5-Wire, Network Cable Assembly + Connectors, 6 ft
6XT04 Sensor Connector for Field Install
6XT05 Motor Fin Mounting Pad 0.5" X 1.5"
6XT06 Motor Fin Mounting Pad 0.5" X 2.0"
6XT07 Motor Fin Mounting Pad 0.25" X 1.75"
6XT08 Motor Fin Mounting Pad 0.25" X 1.0"
6XT09 Sensor Mounting Pads
6XT10 Right-angle Mounting Block + 1/4-28 Captive Screw
Network Mode*
Consult Grainger Technical Support for information
on how to order the following items, which enable
Network Mode operation:
■ PC network interface card
■ Cable (3 ft) with DB-9 connection
■ Configuration utilities software CD
■ Module installation instructions
* Additional Network Components required include host PC with the
minimum system requirements:
●
6XT11 Replacement Monitoring Module
●
6XT12 Sensor Stud Mount 3-Piece Tool Set
●
●
6XT13 Sensor Mounting Studs, 6
6XT15 Mini Style Connector 5-Pin T
●
●
●
●
© 2001 Schneider Electric All rights reserved
Document No. 9300HO0102
Microsoft® Windows NT™ Ver. 4.0 operating system,
Option Pak 4 or greater
At least 24 MB RAM
At least 10 MB hard disk space available
90 MHz processing speed
Display with VGA resolution > (640 x 480)
Network cables
Bus power supply (user supplied)
Machine cabling tools (user supplied)