Download Network hardlock installation A) Instructions for server machine : B

Network hardlock installation
A) Instructions for server machine :
1/ Install the License Manager -> http://download.fine.cz/hw_keys/LMSetup.exe

Should be installed as a service and must be running on the server
B) Instructions for client machine :
1/ Install the hardlock driver (7.32 or higher)
http://files.fine.cz/install/Sentinel_LDK_Run-time_setup.zip
2/ Open (in Notepad) the configuration file Nethasp.ini
http://files.fine.cz/install/nethasp.ini

Re-write the IP address in the line NH_SERVER_ADDR to your server IP address

Save the file Nethasp.ini in the directory C:\Program Files(x86)\Fine\GEO5\2016
or Windows directory (typically C:\Windows)

Further information about proven Nethasp.ini settings find in PDF document
http://files.fine.cz/install/Proven NetHASP Settings.pdf
4/ Testing the hardlock visibility by using Hardlock Detection Tool :
http://download.fine.cz/hw_keys/FHaspSrv.exe


You should see all information about connected hardlocks (picture above)
As soon as you can see the hardlock via this utility, the software should install
smoothly on the same PC.
5/ Insert the installation CD or download GEO5 Personalized Setup to install GEO5 on
your computer
6/ If you have any problems, you should send me the screenshot of error message and
Hardlock Detection Tool (very helpful for me).