Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Voltage optimisation wikipedia , lookup
Pulse-width modulation wikipedia , lookup
Chirp spectrum wikipedia , lookup
Resistive opto-isolator wikipedia , lookup
Wien bridge oscillator wikipedia , lookup
Shockley–Queisser limit wikipedia , lookup
Three-phase electric power wikipedia , lookup
SPATIAL LIGHT MODULATORS SPATIAL LIGHT MODULATORS Reflective Analog SLMs Reflective Analog SLMs All ofAll Meadowlark’s liquid crystal backplanesincorporate incorporate of Meadowlark’s liquid crystalon onsilicon silicon (LCoS) (LCoS) backplanes analog datadata addressing with high to provide providethe thelowest lowest phase analog addressing with highrefresh refreshrates rates to phase rippleripple SLMsSLMs available. User’s can orhigh highspeed speedliquid liquid crystal available. User’s canselect selectstandard standard or crystal for for optimal performance. optimal performance. 1920 1920 x 1152x–1152 New! This SLM offers large format, highhigh fill fill factor – New! This SLM offers large format, factor(high (highoptical optical efficiency), phase (.5 –high 1%), high efficiency), low low phase rippleripple (.5 – 1%), optical optical power handling, refresh rate. This analog, power handling, and and high high refresh rate. This analog, high voltage high voltage backplane stable phase patterns, backplane produces produces very stablevery phase patterns, coupled with faster coupled with faster liquid times. crystal response times. liquid crystal response SPATIALLIGHT LIGHTMM ODULATORS SPATIAL ODULATORS Transmissive SLMs Transmissive SLMs All of Meadowlark’s liquid crystal on glass (LCoG) SLMs enable All of Meadowlark’s liquid crystal on glass (LCoG) SLMs enable simple optical simple optical systems when low pixel counts are sufficient. Users systems when low pixel counts are sufficient. Users can select single-mask or can select single-mask or configurations for phase or amplitude configurations for phase or amplitude modulation, or a dual-mask configuration modulation, or a dual-mask configuration for combined phase and for combined phase and amplitude modulation. amplitude modulation. New 1 x 128 1 – This linear SLMlinear offers high fill factor, x 128 – This SLM offers high fill good factor, good transmitted wavefront distortion, and options for for transmitted wavefront distortion, and options single or dual-plane for modulating phase, single or dual-plane for modulating phase, amplitude, or both simultaneously. New 512voltage, – This high voltage, SLM is Large 512Large x 512512 – Thisx high large pixel large SLM pixel is optimized optimized for high power applications response for high power applications requiring fasterrequiring responsefaster times. times. Thefillanalog, fillrefresh factor, high rate backplane The analog, high factor,high high raterefresh backplane provides provides better optical efficiency and high temporal stability. better optical efficiency and high temporal stability. Large pixels reduce pixel-to-pixel crosstalk. Large pixels reduce pixel-to-pixel crosstalk. amplitude, or both simultaneously. Optics Optics Kit –Includes & mounts for Kit –optics Includes optics & mounts simple for phase or amplitude experiments. simple phase or amplitude experiments. Available pre-aligned and ready to use Available pre-aligned and ready to use over 405 - 1550 nm. Available with over 405 - 1550 nm. Available with optional camera and laser. Sel ecti 1 x 640 – This linear SLM offers higher resolution, high 1 x 640 This linear SLM offers higher resolution, fill factor, and–options for single or dual-plane for high fill factor, and options fororsingle dual-plane for modulating phase, amplitude, bothorsimultaneously. on Gu ide modulating phase, amplitude, or both simultaneously. Hex-127 – This transmissive SLM offers high fill Hex-127 – This transmissive high fill factor, good wavefront distortion,SLM andoffers hexagonal pixelfactor, arraygood for implementing wavefront corrections. wavefront distortion, and hexagonal Small Small 512 x 512 most popular due to due the to balance 512– Our x 512 – Our most product popular product the between resolution, and unprecedented optical response time balance between resolution, and unprecedented optical response (downtime to 2(down ms) for phase modulation (0 – 2 pi). kHz6 kHz to full 2 ms) for full phase modulation (0 – 2The pi).6The refreshrefresh rate, rate, analog backplane provides excellent temporal stability. analog backplane provides excellent temporal stability. 1 x 12,288 The only–high linear array onarray a silicon 1 x–12,288 The resolution only high resolution linear on a silicon backplane available on theon market. The high refresh rate analog backplane available the market. The high refresh rate analog backplane provides excellent temporal stability. OurOur production backplane provides excellent temporal stability. production process process results results in 100% factor, giving highhigh optical efficiency. in fill 100% fill factor, giving optical efficiency. SPATIAL LIGHT SPATIAL LIGHT MM ODULATORS ODULATORS pixel array for implementing wavefront corrections. Pixel Format Response Time Pixel Pitch Efficiency Fill Factor Active Area (mm) 1 x 128 35 – 70 ms 100 μm 85 - 92% 98.0% 12.80 x 5.00 1 x 640 35 – 70 ms 100 μm 85 - 92% 98.0% 64.00 x 5.00 Hex 35 – 70 ms 1 mm > 90% 93.1% 12.00 Ø TELECOM TELECOM optional camera and laser. 5964 Iris Parkway, Frederick, CO, 80530 Meadowlark Optics - 5964 Iris Parkway, Frederick, CO 80530 [email protected] – www.meadowlark.com – 303.833.4333 [email protected] – www.meadowlark.com - 303-833-4333 ASTRONOMY MILITARY / AEROSPACE BIOMEDICAL ASTRONOMY MILITARY / AEROSPACE BIOMEDICAL ENERGY ENERGY OPTOGENETICS OPTOGENETICS HIGH RESOLUTION • HIGH SPEED • LOW PHASE RIPPLE • HIGH VOLTAGE • ANALO G • AMPLITUDE, PHASE, OR COMBINED MODULATION • HIGH EFFICIENCY • HIGH POWER HANDLING • Small 512 x 512 Analog Spatial Light Modulator Why Choose Meadowlark Reflective SLMs? High Voltage Backplanes = Fastest Response Times Meadowlark Optics SLMs use custom backplanes, and proprietary drive schemes to achieve response times Resolution: 512 x 512 Array Size: 7.68 x 7.68 mm Pixel Pitch: 15 x 15 µm Wavelength Wavefront Distortion down to 2 ms (wavelength dependent). Most other liquid crystal spatial light modulators Highest Phase Stability Commercially Available - Our backplanes are custom designed to allow high refresh rates (up to 6 kHz), and direct analog drive schemes. Refreshing the voltage at the pixel at rates far surpassing the response time of the liquid crystal ensures high temporal phase stability. Further, use of direct analog drive schemes, as opposed to digital dithering, reduces optical flicker to the noise floor of detectors. Low Inter-pixel Cross Talk - Our backplanes are custom designed to offer high voltage at the pixel (5 – 12 V), and a large pixel pitch. Further, our SLMs are built with Meadowlark Optics proprietary liquid crystal which minimizes the required thickness of the LC layer in the SLM. By maximizing the ratio of pixel pitch to LC thickness we are able to Liquid Crystal Response Time (Standard Efficiency / High Efficiency) Model P512/PDM512 utilize display backplanes built with standard Nematic liquid crystal, limiting response time to >30 ms. Fill Factor: 83.4 - 100% Diffraction Efficiency*: 61 - 95% Controller: PCIe 8-bit, PCIe 16-bit, DVI 16-bit AR Coatings (Ravg <1%) TRANSMISSIVE & REFLECTIVE • LOW INTER -PIXEL CROSS TALK Resolution: 1920 x 1152 Array Size: 17.6 x 10.7 mm Pixel Pitch: 9.2 x 9.2 µm Wavelength Fill Factor: 95.7% Diffraction Efficiency*: 88% Controller: HDMI 8/12-bit Wavefront Distortion Liquid Crystal Response Time Model Model HSP512/HSPDM512 ODP512/ODPDM512 405 nm λ/5 25 ms / 33.3 ms N/A 3 ms / 4 ms TBD 405 nm λ/3 6 ms 400 – 800 nm 532 nm λ/7 33.3 ms / 45 ms 7 ms / 10 ms 3.5 ms / 4.5 ms 450 – 850 nm 532 nm λ/5 9 ms 400 – 800 nm 635 nm λ/8 33.3 ms / 45 ms 12 ms / 16.7 ms 4 ms / 5 ms 450 – 850 nm 635 nm λ/6 12 ms 400 – 800 nm 785 nm λ/10 55.5 / 80 ms 17.2 ms / 22.2 ms 4.5 ms / 5.5 ms 600 – 1300 nm 785 nm λ/7 19 ms 600 – 1300 nm 1064 nm λ/10 66.7 / 100 ms 10 ms / 16.7 ms 5 ms / 6 ms 600 – 1300 nm 1064 nm λ/10 25 ms 600 – 1300 nm 1550 nm λ/12 100 / 130 ms 20 ms / 28.5 ms 6 ms / 7 ms 850 – 1650 nm 1550 nm λ/12 33 ms 850 – 1650 nm *Diffraction efficiency of silicon backplane. Performance varies as a function of wavelength and pixel value. Broad Wavelength Capabilities - Meadowlark Optics is the only SLM supplier Large 512 x 512 Analog Spatial Light Modulator 1 x 12,288 Analog Spatial Light Modulator Unlike many display LCoS backplanes which require a pulse width modulation (PWM) Resolution: 512 x 512 Array Size: 12.8 x 12.8 mm Pixel Pitch: 25 x 25 µm Wavelength scheme, Meadowlark backplanes utilize analog voltages at each pixel. This results in a very Wavefront Distortion stable phase response over time. High Bit Depth Controllers - Meadowlark offers 8, 12, and 16-bit controllers to AR Coatings (Ravg <1%) Model P1920 *Diffraction efficiency of silicon backplane. Performance varies as a function of wavelength and pixel value. Analog is Better - All Meadowlark SLMs have been designed for phase modulation. HIGH FILL FACTOR 1920 x 1152 Analog Spatial Light Modulator offer SLMs with minimal inter-pixel effects. capable of offering SLMs designed for use from UV (>365 nm) up to the MWIR (3-5 µm). • Fill Factor: 96% Diffraction Efficiency*: 88% Controller: DVI 16-bit Liquid Crystal Response Time (Standard Efficiency / High Efficiency) Model P512L Model HSP512L Resolution: 1 x 12,288 Array Size: 19.66 x 19.66 mm Pixel Pitch: 1.6 µm x 19.66 mm AR Coatings (Ravg <1%) Wavelength Fill Factor: 100% Diffraction Efficiency*: 80 - 95% Controller: PCIe 16-bit Liquid Crystal Response Time AR Coatings (Ravg <1%) Model HSP12K 532 nm λ/5 9 ms 2 ms 450 – 850 nm 532 nm 4.5 ms 450 – 850 nm 635 nm λ/6 15 ms 2.5 ms 450 – 850 nm 635 nm 5 ms 450 – 850 nm 785 nm λ/7 20 ms 4.5 ms 600 – 1300 nm 785 nm 8.5 ms 600 – 1300 nm 1064 nm λ/10 33 ms 7 ms 600 – 1300 nm 1064 nm 15 ms 600 – 1300 nm 1550 nm λ/12 75 ms 14 ms 850 – 1650 nm 1550 nm 30 ms 850 – 1650 nm provide the most linear resolvable phase levels commercially available (up to 500). Fast transfer speeds from the computer to the SLM are offered up to 2 kHz. *Diffraction efficiency of silicon backplane. Performance varies as a function of wavelength and pixel value. *Diffraction efficiency of silicon backplane. Performance varies as a function of wavelength and pixel value.