Download Item Spec`s Spec`s with Sw DL 3155M09 SINGLE

Item
DL 3155M09
Spec's
Spec's with Sw
SINGLE-PHASE TRANSFORMER - didactic equipment - circuit blocks:
voltage and current transformation ratio, no-load transformer,
transformer in different load conditions; phase displacement, pulse
transformer, hysteresis cycle of a pulse transformer, magnetic saturation
curve - theoretical topics: ideal transformer: no-load operation, ideal
transformer: load operation, real transformer: no-load and load
operation, tests on the transformer, the autotransformer, magnetic
core, electric windings, transformer cooling, transformer applications,
pulse transformers, transformers for blocked oscillators, analysis of the
behaviour of voltage vs. time. Fault simulation. It must be possible to
perform the following experiences: Transformation ratio, No-load
transformer, Transformer in different load conditions, Pulse
transformer, Hysteresis cycle of a pulse transformer. The faults must be
inserted by microswitches mounted on the board; the module must be
provided with a EISA BUS 31+18 INTERFACE, connections and test points
by 2mm terminals.
Dimensions of the module: 297x260mm.
The module must be supplied with a theoretical and practical manual.
SINGLE-PHASE TRANSFORMER - didactic equipment - circuit blocks:
voltage and current transformation ratio, no-load transformer,
transformer in different load conditions; phase displacement, pulse
transformer, hysteresis cycle of a pulse transformer, magnetic saturation
curve - theoretical topics: ideal transformer: no-load operation, ideal
transformer: load operation, real transformer: no-load and load
operation, tests on the transformer, the autotransformer, magnetic core,
electric windings, transformer cooling, transformer applications, pulse
transformers, transformers for blocked oscillators, analysis of the
behaviour of voltage vs. time. Fault simulation. It must be possible to
perform the following experiences: Transformation ratio, No-load
transformer, Transformer in different load conditions, Pulse transformer,
Hysteresis cycle of a pulse transformer. The faults must be inserted by
software and by microswitches mounted on the board. The module must
be provided with a EISA BUS 31+18 INTERFACE for connection to power
supply and PC, with a software able to allow the study of theoretical
topics through PC with hyper textual navigation according to the HTML
standard. Connections and test points by 2mm terminals.
Dimensions of the module: 297x260mm.
The module must be supplied with a theoretical and practical manual.