Download File

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Power electronics wikipedia , lookup

Surge protector wikipedia , lookup

Valve RF amplifier wikipedia , lookup

Ohm's law wikipedia , lookup

Thermal runaway wikipedia , lookup

Amplifier wikipedia , lookup

Molecular scale electronics wikipedia , lookup

Switched-mode power supply wikipedia , lookup

Schmitt trigger wikipedia , lookup

Rectiverter wikipedia , lookup

Current source wikipedia , lookup

Operational amplifier wikipedia , lookup

CMOS wikipedia , lookup

TRIAC wikipedia , lookup

Opto-isolator wikipedia , lookup

Nanofluidic circuitry wikipedia , lookup

Wilson current mirror wikipedia , lookup

Power MOSFET wikipedia , lookup

Transistor–transistor logic wikipedia , lookup

Current mirror wikipedia , lookup

Transcript
Electronic Principles
7th Edition
Albert Malvino & David J Bates
Ref. Books
1) Electronic devices and circuit theory – Robert Boylestad
2) Basic Electronics – A. P. Godse & U. A. Bakshi
Rizwan H. Alad & Vasim A. Vohra
Part 1 Syllabus
•
•
•
•
•
•
•
•
Chap. 6 Bipolar Junction Transistors
Chap. 7 Transistor Fundamentals
Chap. 8 Transistor Biasing
Chap. 9 Transistor AC Models
Chap. 10 Voltage Amplifiers
Chap. 11 CC and CB Amplifiers
Chap. 12 Power Amplifiers
Chap. 23 Oscillators
Transistor
• Three doped regions
• Emitter, Base and Collector
• Base region is much thinner as compared to
the collector and emitter
• npn and pnp
• Emitter is heavily doped, Base is lightly and
collector is intermediate
• Collector regions is physically largest
Before Diffusion
After Diffusion
Each of Dep. Layer barrier potential app. 0.7 V at 25o C
Unbiased transistor is like two back-to-back diodes
Bipolar Junction Transistors
• A
bipolar
transistor
essentially consists of a pair of
PN Junction diodes that are
joined back-to-back.
• There are therefore two kinds
of BJT, the NPN and PNP
varieties.
• The three layers of the
sandwich are conventionally
called the Collector, Base, and
Emitter.
Modern Transistors
NPN Bipolar Junction Transistor
•One N-P (Base Collector) diode one P-N (Base Emitter) diode
PNP Bipolar Junction Transistor
•One P-N (Base Collector) diode one N-P (Base Emitter) diode
Analogy with Transistor :Fluid-jet operated
Valve
*The Biased Transistor
•Heavily doped emitter inject
free electrons into the base
•Lightly doped base pass
electrons on to the collector
•Collector collects or gathers
electrons from the base
Biasing method – Emitter junction FB
Collector junction RB
Summary
• Forward biased emitter
diode, forcing the free
electrons in the emitter to
enter the base
• Thin and lightly doped base
diffuse
electrons
into
collector
• Collector, through RC and
into the positive terminal of
VCC
Figure 5.3 Current flow in an npn transistor biased to operate in the active mode. (Reverse current components due to drift of thermally
generated minority carriers are not shown.)
Transistor Currents
• IE – Largest emitter current
• Emitter electrons flow to the
collector, IC ≈ IE
• IB ≤ 0.01 IC
• KCL, IE = IC + IB
BJT  and 
•From the previous figure IE = IB + IC
•Define dc = IC / IE
• DC alpha is slightly less than 1
• Low power transistor αdc > 0.99 and High power
transistor αdc > 0.95
•Define dc = IC / IB - known as a current gain
BJT  and 
•Then dc = IC / (IE –IC) = dc /(1- dc)
•Assignment – Derive dc = dc /(1+ dc)
•Then IC = dc IE
& IB = (1-dc) IE
Solved Example 6.1, 6.2, 6.3
NPN BJT Current flow
The CE connection
• CE, CC and CB
• CE because emitter is
common to both VBB and
VCC
• Left loop – Base loop
• Right loop – collector loop
The CE connection
• Base Loop, VBB source
and RB – current limiting
resistor
• Changing VBB or RB,
change base current and IB
Change than IC change
• IB controls IC
Notation
Double Subscripts
Single Subscripts
• Voltage source – VBB and
VCC
• Used for Node voltages
• VB – voltage between base
and ground
• VC and VE
• VBE – voltage between
points B and E
• VCE = VC – VE
• VCE – voltage between
points C and E
• VCB and VBE
The Base Curve / Input Characteristics
• Graph IB versus VBE
• Like ordinary diode
• Ohm’s low to Base loop
VBB  VBE
IB 
RB
• Ideal diode VBE = 0 and
second app. VBE = 0.7 V
I
Collector Curve / output Characteristics
• Graph IC versus VCE
• Ohm’s low to Collector loop
VCC  VCE
IC 
RC
• Fixed value of based
current, vary VCC and
measure IC and VCE
I
Transistor Characteristics
Input Characteristics
Output Characteristics
Active Region, Constant collector current
• After collector diode reverse biased, it collect all
the electrons that reach its deplation layer
• Further increased VCE cannot increased IC
• Collector can collect only those free electrons that
emitter injects
• VCE > VCE(max), collector diode break down
• Power Dissipation PD = VCEIC
• PD < PD(max)
Operating Region of Transistor
• Active region, middle region – normal operation
of transistor
Emitter diode – FB and Collector diode – RB
• Breakdown region – transistor will be destroyed
• Saturation region – rising part of curve, VCE
between zero and few tenth of volt
Collector diode has insufficient positive voltage to
collect all the free electrons injected into the base
Operating Region of Transistor
• Cut off region – IB = 0 but still small collector
current
Because collector diode RB – Reverse minority
carrier + Surface leakage current
BJT Operating Regions
Analogy with Transistor in Active
Region: Fluid-jet operated Valve
In active region this stopper does not really have
noticeable effect on the flow rate
Emitter Base Junction – FB
Collector Base Junction – RB
Analogy with Transistor Cutoff
Fluid-jet operated Valve
Emitter Base Junction – RB
Collector Base Junction – RB
Analogy with Transistor Saturation
Fluid-jet operated Valve
The valve is wide open; changing valve position a little bit
does not have much influence on the flow rate.
E-B Junction – FB
C-B Junction – FB