Download lumastrobe warning lights strobe warning lights

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Document related concepts

Electric battery wikipedia, lookup

LED lamp wikipedia, lookup

Headlight flashing wikipedia, lookup

Flashlight wikipedia, lookup

Opto-isolator wikipedia, lookup

Transcript
Bulletin 11/03
LUMA
LU
MASTROBE
STROBE WARNING LIGHTS
33 Greenwood Ave. , Midland Park, NJ 07432 • 1-800-775-5862 • Fax: 201-445-8575
www.LUMASTROBE.com
• E-Mail: [email protected]
Office Hours Monday – Friday 9am – 5pm Eastern Standard Time
Innovators in Portable, Battery-Powered Warning Lights.
LUMASTROBE WARNING LIGHTS QUICK REFERENCE GUIDE
LED Warning Lights
Model
LX-18
LX-5
M-5
LX-12
BX-12
BX-6
RCBX-12-TS
RCBX-12
Description
M-2
Y-2
LX-36
MS-FLX
SL
412
ministrobe / double flash
tilt switch / double flash
() LED / triple flash
joule / single flash
joule / single flash
joule / single flash
MSM-FLX
SML-H1
HR
flex base / quick disconnect / rpm
magnet mtg
/ rpm
permanent or magnetic mtg
/ rpm
S-2
S-S
BT-10-S-2
PWL
BT-10
'' stop / stop paddle
'' stop / slow paddle
'' lighted baton / sign combo
/'' long warning/flashlight
/'' long marshalling wand
() LED / degree visibility
() LED / degree visibility
() LED / onedirection visibility
() LED / onedirection visibility
() LED / onedirection visibility
() LED / twodirection visibility
() LED / remotecontrolled traffic signal
() LED / remotecontrolled onedirection
Power Page #
2
3
4
4
5
5
6
6
“D” CELL
POWERED
LANTERN
POWERED
Xenon Strobe Lights
“D” CELL
POWERED
VEHICLE
POWERED
7
8
9
10
11
11
Halogen Rotating Lights
VEHICLE
POWERED
10
12
12
Stop Signs, Wands & Flashlights
N/A
“D” CELL
POWERED
AA
“D” CELL
POWERED
13
13
13
14
Bk. Pg.
Why LEDs for
Lumastrobe Warning Light Products?
T
he use of light emitting diode (LED) technology in the warning light industry is a relatively new
phenomenon
This is primarily a result of the development of high intensity LEDs in recent years
Although their intensity is not yet comparable with halogen or xenon lamps their brightness can be
greatly enhanced by their use in clusters and in combination with optics
Pioneering new techniques by many
manufacturers for improving LED intensity continues as LEDs are rapidly becoming today’s illumination of
choice
And for good reason; in most applications they are less expensive and most maintenancefree lighting
source available today lasting up to hours
Figure 1
LED Construction Simply speaking the LED is not a
light bulb
It is a solid state semi
conductor that emits light when electric current is
passed through it
LEDs are made of one or more
atomic elements to make a special semiconductor
material
This material is usually made of different
combinations of silicon gallium aluminum and
arsenide injected with several impurities
This process
of injecting impurities into these pure elements is
called “doping”
The result of this process creates two
layers one with a positive charge (protons) and the
other with a negative charge (electrons)
When a
voltage is applied to the diode an interaction
between the proton and electron layers creates pho
tons which create light
LEDs are especially con
structed to release large numbers of photons
outward
LED are housed in a plastic enclosure that
concentrates the light in a particular direction
As you
can see in Figure most of the light bounces off the
sides of the bulb and projects on through the rounded end
Advantages of LEDs LEDs have several advantages over conventional lamps
For one thing they don’t have a
filament that will burn out so they last much longer (estimated at over hrs
)
reducing lamp replacement and costly maintenance
Additionally their small plastic bulb makes them a lot
more durable and their small size allows many of them to fit more easily into modern electronic circuits
LEDS
are not effected by vibration
In addition LED products are nonpyrotechnic so there are no dangerous flames
sparks or fumes
Their main advantage is efficiency
Since LEDs generate very little heat a much higher percentage of the elec
trical power is going directly to generating light
This factor is especially important with warning lights where
battery drain becomes an issue especially when a vehicle is stopped with the motor off
A typical () LED
warning light draw only Amps as compared to Amps for Joule strobes and Amps for halogen
rotating lights
Low power consumption leads to longer battery life
Lumastrobe Warning Lights Lumastrobe Warning Lights is well aware of the trend toward the extensive use and
acceptance of LED products in the marketplace
While they continue to offer an
impressive line of vehicle powered xenon strobes and halogen rotating lights Lumastrobe has become an innova
tor in portable batterypowered warning lights
Using clusters of LEDs individual LED magnifying
diffuser lenses and Fresnel domes LED brightness has been enhanced and projection angles increased
The result
has been the generation of a family of portable batterypowered warning lights featuring a variety of mounting
options (magnetic handle bracket or bolt mounting)
Because of the low current drain of LEDs most of these
products will produce up to hours of continuous flashing light using only Dcell alkaline batteries
Please review the following pages
Whatever your application may be there is a Lumastrobe Warning Light
product that will accommodate that requirement
If you have unique applications or can’t find what you need
let us know
We continue to develop a wide variety and combinations of warning lights
1
(18) LED Portable Warning Lights
BATTERY POWERED - 3 VDC
MODEL LX-18
LX-18 – Unique Optical Design✻
3600 visibility
3-1/4''
U
tilizing the latest technology in lighting sources and optical design the
LX uses ultra bright longlife light emitting diodes (LEDs)
These
are arranged in an hexagonal pattern two high and each positioned
behind individual magnifying diffuser in the clear rugged polycarbonate
dome
This unique design intensifies each LED light emission yielding a degree peripheral light signal with a degree effective viewing angle
Powered by only () D cells the low current drain of the LED yields hours of continuous bright triple flashes
Each unit comes with magnets
(rated at lb
pull) recessed in the base
A pack caddy of LX is available
It has many applications for police fire utility EMS construction industrial
municipality and maritime personnel
The LX is ideal for marking roadway
hazards obstructions and the presence of cranes and equipment
Also used to
mark accident scenes and disabled vehicles
4-3/4''
(✻ See page 9 for technical pictorial)
MODEL : LX-18
Voltage / Power Source: VDC / () Dcell
Flash Rate:
(amber & red) triple flashes/min
(other colors) double flashes/min
Lamp Bulb / Lamp Life: () super brights LEDs / hours
Brightness / Visibility:
cd / degrees
Operational Modes:
Flashing & steadyon (model LX)
Flashing & photocell (model LXP)✻✻
Battery Life:
hours (flashing)
Optics: (inner lens)
Polycarbonate () segments of individ
ual magnifying diffuses
Optics: (outer lens)
Clear Polycarbonate
Base:
ABS
Weight:
lbs
(with batteries)
Standard Features:
• Magnetic Base rated at lb
pull or
/'' dia
x '' long handle
• '' long lanyard
• External “on/off” push button switch
• Operational mode activation switch in
battery compartment
Options:
• Heavy duty magnet (rated @ lb
pull)
• Stainless steel wall mounting bracket
• pack with quick response caddy
LX-18-H-WB
with handle
& wall
mounting
bracket
LX-18-H
(with '' long
handle)
6''
LX-18-PK
(supplied with Instant Response Caddy)
(not avail with “H” base units)
✻✻ With Photocell that turns light on in darkness and off in daylight
LX-18 • A • S • PK
•
•
CODE
MODEL
CODE
COLOR
CODE
BASE
CODE
OPTIONS
LX-18
() LED
warning
light
A
Amber
S
M
B
Blue
Standard
magnet
Heavy duty
magnet
C
Clear
G✻✻
Green
MODEL
LX-18P
() LED
warning
light
with
photocell
✻✻ Green LEDs & Clear Lens
R
•
H
/'' dia
x '' long
handle
Red
2
WB
Stainless Steel
wall bracket
PK
Six pack w/caddy
(magnetic
base only)
LX-18-H
mounted in
traffic cone
LED WARNING LIGHTS
EXAMPLE:
How to Order:
LX-18-M
with Heavy Duty
Magnet Base
“D” CELL
POWERED
SPECIFICATIONS
(5) LED Portable Warning Lights
BATTERY POWERED - 3 VDC
MODEL LX-5
LX-5 – 360 degree visibility
2''
T
he combination of a bright portable warning light with long battery
life is achieved with the LX
Utilizing LED lamps (rated at hours) the low power consumption translates into hours
of a bright flashing light signal using () new “D” cell alkaline batteries
The
screwon base option allows the LX to be easily converted to a hand held
beacon inserted into a traffic cone or mounted using a wall mounting
bracket
Two strengths of magnetic bases are available for vertical or
horizontal mounting on steel surfaces
The unit’s waterproof construction
low center of gravity small size and external push button “on/off” switch
makes it a safe caution marker for general warning use
The LX is a non
pyrotechnic light thus eliminating concerns of dangerous flames fumes or
sparks
Ideal for outside (danger zones disabled vehicles) as well as indoor
(maintenance activities floor washing or repairs) applications
2-1/2''
5-1/2''
SPECIFICATIONS
4-1/8''
LX-5-H
6''
(with '' long
handle)
LX-5-M
with Heavy Duty
Magnet
LX-5-PK
LX-5-H-WB
“D” CELL
POWERED
LED WARNING LIGHTS
with wall s/s
mounting bracket
LX-5-H
mounted in
traffic cone
(supplied w/Instant Response
Caddy) (magnet base units only)
How to Order:
MODEL
MODEL : LX-5
Voltage / Power Source : VDC / () Dcell
Flash Rate:
double flashes/min
Lamp Bulb / Lamp Life : () super brights LEDs / hours
Brightness / Visibility :
cd / degrees
Operational Modes:
Flashing & steadyon (model LX)
Flashing & photocell (model LXP)✻
Battery Life:
hours (flashing)
Optics: (inner lens)
Clear Polycarbonate fresnel
Optics: (outer lens)
Polycarbonate
Base:
ABS
Weight:
lbs
(with batteries)
Standard Features:
• Magnetic Base rated at lb
pull or
/'' dia
x '' long handle
• '' long lanyard
• External “on/off” push button switch
• Operational mode activation switch in
battery compartment
Options:
• Heavy duty magnet (rated @ lb
pull)
• Stainless steel wall mounting bracket
• pack with quick response caddy
✻ With Photocell that turns light on in darkness and off in daylight
EXAMPLE:
•
•
LX-5 • A • S • M • PK
•
CODE
MODEL
CODE
COLOR
CODE
BASE
CODE
OPTIONS
LX-5
() LED
warning
light
A
Amber
S
M
B
Blue
Standard
magnet
Heavy duty
magnet
C
Clear
H
WB
Stainless Steel
wall bracket
G✻✻
Green
/'' dia
x '' long
handle
PK
Six pack w/caddy
(magnetic
base only)
HQ
Helo Quad
pack
LX-5P
() LED
warning
light
with
photocell
R
Red
✻✻ Green LEDs & Clear Lens
3
(7-1/4'') LED Portable Warning Lights
BATTERY POWERED - 3 VDC
MODEL M-5
M-5 & LX-12 – one direction visibility
5
LEDS
SAME DIMENSIONS
A
choice of warning lights for specific applications are now available
with the Model M and LX
Both lights feature LED technology
and low power consumption
The Model LX’s unique lens design
provides exceptional brightness from each of its () LEDs that are posi
tioned behind individual magnifying diffusers molded into a polycarbonate
lens
Advanced circuitry doubles the operating battery life as compared to
the M
The M has () LEDs mounted in a cross pattern and positioned
behind the center of a Fresnel lens
Since there is a price differential
between the two models the choice can accommodate both application
requirements and cost restraints
The unit’s raintight construction low
center of gravity and external push button on/off switch makes it a safe
caution marker for general warning use
7-1/4''
4-1/8''
SPECIFICATIONS
MODEL :
Voltage / Power Source: VDC / () Dcell
Flash Rate:
double flashes/min
(all colors)
triple flashes/min
(amber&red)
double flashes/min
(others colors)
Lamp Bulb / Lamp Life: () super brights LEDs / hrs
() super brights LEDs / hrs
Brightness / Visibility: cd / One direction
Operational Modes:
Flashing & photocell✻
Battery Life:
hours (flashing)
hours (flashing)
Optics: (outer lens)
Base:
Weight:
Standard Features:
Options:
Polycarbonatefresnel
Polycarbonate with individual LED
magnifying diffusers
ABS
lbs
(with batteries)
lbs
(with batteries)
• Magnetic Base rated at lb
pull
or /'' dia
x '' long handle
• Metal carrying handle
• External “on/off” push button switch
• Operational mode activation switch
in battery compartment
• Heavy duty magnet (rated @ lb
pull)
• Stainless steel wall mounting bracket
• pack with quick response caddy
M-5 LX-12
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
FRESNEL LENS DESIGN
MODEL LX-12
12
LEDS
7-1/4''
10-1/2''
•
•
•
•
4-1/8''
•
•
•
•
•
•
UNIQUE OPTIC DESIGN LENS
•
•
•
•
•
•
(SEE PAGE 9 FOR TECHNICAL PICTORIAL)
M-5-H
with ”
long handle
FOR ALL BASE STYLES
REFER TO PICTORIALS
ON PG
EXAMPLE:
•
LX-12 • A • S • M • PK
•
CODE
MODEL
CODE COLOR CODE
M-5 () LED warning light A Amber
S
with photocell
B
Blue
()
LED
warning
LX-12
C
H
Clear
light with photocell
G✻✻ Green
R
BASE
Standard
magnet
/'' dia
x '' long
handle
CODE
M
OPTIONS
Heavy duty
magnet
WB
Stainless Steel wall
bracket
PK
Six pack w/caddy
(magnetic base only)
Red
✻✻ Green LEDs & Clear Lens
4
LX-12-H
mounted in
traffic cone
“D” CELL
POWERED
How to Order:
MODEL
•
LED WARNING LIGHTS
✻ With Photocell that turns light on in darkness and off in daylight
LED Portable Barricade Flashers
BATTERY POWERED - 6 VDC
MODEL BX-6
6
LEDS
13-1/2''
'
7-1/2'
TWO DIRECTION VISIBILITY
FRESNEL LENS DESIGN
MODEL BX-12
12
LEDS
BX-12 & BX-6 - Bulb Replacements
no longer necessary
A
choice of barricade flashing warning lights for specific applications is
now available with the model BX and BX
Both lights feature LED
technology and low power consumption
The model BX’s unique
lens design provides exceptional brightness from each of its () LEDs that are
positioned behind individual magnifying diffusers molded into a polycarbonate
lens
Advanced circuitry doubles the operating battery life as compared to the
BX
The BX has () LEDs three () facing in each direction and positioned
behind the center of a fresnel lens
Since there is a price difference between the
two models the choice can accommodate both application requirements and
cost restraints
The units are raintight and can be seen up to feet in the
daylight and conservatively / mile in darkness
They both can be mounted on
standard barrel or sawhorse barricades using tamper proof hardware (sup
plied)
For other than barricade uses the low center of gravity and carrying
handle makes these units a stable portable companion for marking roadways
and hazardous conditions or disabled vehicles
SPECIFICATIONS
Lamp Bulb / Lamp Life:
Brightness/ Visibility:
13-1/2''
Operational Modes:
Battery Life:
Optics: (outer lens)
Base:
Weight:
'
7-1/2'
Standard Features:
ONE DI RECTION VISIBILITY
UNIQUE OPTIC DESIGN LENS
BX-12 BX-6
•
•
•
(all colors) double flashes/min
() super brights LEDs / hours
() super brights LEDs / hours
cd / One direction
cd / Two direction
Flashing & photocell✻
hours (flashing)
Polycarbonate with individual magnifying
diffusers positioned in front of each LED
Polycarbonate fresnel
High density polyethylene
lbs
(with batteries)
lbs
(with batteries)
• Metal carrying handle
• External “on/off” push button switch
• Operational mode activation switch in
battery compartment
• Tamperproof hardware
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
✻ With Photocell that turns light on in darkness and off in daylight
How to Order:
MODEL
•
LANTERN
POWERED
LED WARNING LIGHTS
(SEE PAGE 9 FOR TECHNICAL PICTORIAL)
MODEL :
Voltage / Power Source: VDC / () lantern batteries
Flash Rate:
(amber & red) triple flashes/min
(other colors) double flashes/min
EXAMPLE:
CODE
MODEL
CODE
COLOR
BX-6
() LED warning light
two directions
A
Amber
B
Blue
BX-12
() LED warning light
one direction
C
Clear
G✻✻
Green
R
5
BX-12 • A
Red
✻✻ Green LEDs & Clear Lens
Remote LED Traffic Signals & Warning Lights
PORTABLE - BATTERY POWERED - 12 VDC
MODEL RCBX-12-TS
RCBX-12 & RCBX-12-TS - Self-powered,
wireless controlled light signals
U
tilizing a standard Model BX Series warning light (see specifica
tions on Page ) a remote (wireless) controlled series has been
developed
With a remote controller (Key Fob) a set of selfpowered
traffic signals (one Red and one Green) can be quickly deployed for
temporary or emergency control of traffic
The operational range of the
remote is feet and the visibility of the light is feet in daylight and
conservatively / mile in darkness
The traffic signals are interconnected
with a foot electrical cable as standard
For safety and control purposes
the design permits only one color (either Red or Green) to be activated
when the button on the controller is pressed
The model number for traffic
signal set is RCBXTS
Two sets of this model could control the opposite
ends of oneway traffic situations from a middle location yielding a foot distance from each other
Since only one of the signals contain the
remote control receiver and active batteries the battery compartment of
the other signal could be used for spare batteries
If a spare battery is not
used in the second unit and the signal lights are to be used free standing the
battery compartment should be weighted down with sand or stone to give
it a low center of gravity and stability
The RCBXTS can be easily mount
ed on barricade barrels or sawhorses or operated in its quick response caddy
KEY
FOB
REMOTE CONTROLLED TRAFFIC SIGNALS
How to Order:
EXAMPLE:
RC-BX-12 • TS
Remote Controlled Traffic Signal Set
(1) Red and (1) Green
Another model RCBX is a spinoff of the traffic signal
This model is
designed to remotely control one () or up to six () warning lights with a
single remote controller (Key Fob)
This multitask feature is excellent for
setting a perimeter of a bright light signal either flashing or steadyon
around hazardous situations or to alert personnel not to enter particular
areas
MODEL RCBX-
These units are ideal for temporary and emergency applications where the
lights can be deployed quickly and controlled by one individual
ONE DI RECTION VISIBILITY
RC-BX-12 -TS
Voltage / Power Source: VDC / () lantern batteries
Flash Rate:
(amber & red) triple flashes/min
(other colors) double flashes/min
Lamp Bulb / Lamp Life: () super brights LEDs
/ hrs
Brightness/ Visibility:
cd / One direction
Operational Modes:
Flashing
Steadyon
Battery Life:
hours
Optics: (outer lens)
Polycarbonate with individual
magnifying diffusers positioned in
front of each LED
Base:
High density polyethylene
Weight:
lbs
(with batteries) per unit
Standard Features:
• Remote controller (key fob) V
GPA Watch type battery
included
• Metal carrying handle
• External “on/off” push button
switch
• Tamperproof hardware
•
•
N/A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
KEY
FOB
•
•
•
•
REMOTE CONTROLLED WARNING LIGHTS
How to Order: EXAMPLE:RC-BX-12•A•F•3✻✻
MODEL
•
•
CODE MODEL CODE COLOR CODE TYPE
RC-BX-12 Remote
controlled
warning
lights
A
Amber
B
Blue
C
Clear
G✻
Green
R
F
Flashing
S
Steady
Red
✻✻ Note: Indicate # of units when ordering
6
✻ Green LEDs & Clear Lens
On
LED WARNING LIGHTS
MODEL :
LANTERN
POWERED
SPECIFICATIONS
Xenon Portable Strobe Warning Lights
BATTERY POWERED - 3 VDC
MODEL M-2
M-2 – Strobe light intensity, compact
design, 3600 visibility
2"
T
he intense brightness of a Xenon lamp has been designed into
a small rugged and dependable double flash strobe Model M
Waterproof and battery powered by () “D” cell batteries hours of
a flashing signal is provided for a multitude of industrial construction utility
municipality aviation and marine applications
The handy pack with caddy
stores easily in a trunk and can quickly be deployed and activated with its
external push button switch
The screwon base option allows the M to
be easily converted to a hand held beacon inserted into a traffic cone or
mounted using a wall mounting bracket
Two strengths of magnetic bases are
available for vertical or horizontal mounting on steel surfaces
The M is a
nonpyrotechnic light thus eliminating concerns of dangerous flames fumes
or sparks
Ideal for outside (danger zones disabled vehicles) as well as indoor
(maintenance activities floor washing or repairs) caution markers
2-1/2"
5-1/2"
4-1/8"
M-2-H
(with " long
handle)
6"
SPECIFICATIONS
MODEL : M-2
Voltage / Power Source:
Flash Rate:
Lamp Bulb / Lamp Life:
Brightness / Visibility:
Operational Modes:
VDC / () Dcell
double flashes/min
Xenon flash tube / hours
cd / degrees
Flashing (model M)
Flashing & photocell (model MP)✻
hours (flashing)
Clear Polycarbonate Fresnel
Polycarbonate
ABS
lbs
(with batteries)
• Magnetic Base rated at lb
pull or
/'' dia
x '' long handle
• '' long lanyard
• External “on/off” push button switch
• Operational mode activation switch in
battery compartment
Battery Life:
Optics: (inner lens)
Optics: (outer lens)
Base:
Weight:
Standard Features:
M-2-M
with Heavy Duty
Magnet
M-2-H-WB
with wall s/s
mounting
bracket
Options:
• Heavy duty magnet (rated @ lb
pull)
• Stainless steel wall mounting bracket
• pack with quick response caddy
M-2-PK
“D” CELL
POWERED
LED WARNING LIGHTS
(supplied w/ Instant Response Caddy)
(magnet base units only)
✻
With Photocell that turns light on in darkness and off in daylight
How to Order:
MODEL
•
M-2-H
mounted in
traffic cone
EXAMPLE:
•
M-2 • A • S • M • PK
•
CODE MODEL CODE COLOR CODE
M-2
Xenon
Strobe
M-2P
Xenon
Strobe
with
photocell
A
B
C
R
7
Amber
Blue
Clear
Red
BASE
CODE
OPTIONS
S
Standard
magnet
M
Heavy duty
magnet
H
/'' long
x ''diam
handle
WB
Stainless Steel
wall bracket
PK
Six pack w/caddy
(magnetic base only)
HQ
Helo Quad pack
Tilt Switch Xenon Strobe Lights
BATTERY POWERED - 3 VDC
MODEL Y-2
Y-2 – Immediate Activation, Land & Sea
locating Beacon
Marine Applications - Floating Beacon and Buoy Light
4-1/4''
T
he Y is designed to be stored in its stainless steel mounting bracket in
an inverted position (lens down light "off") on a watercraft
When
required the strobe can be quickly removed from this bracket and held
upright which immediately activates an internal tilt switch to a flashing "on"
mode
Being watertight it will automatically float in an upright flashing
mode if thrown overboard
Attached to a life preserver with its foot lanyard
it makes an effective life saving locating beacon
Affixed to the watercraft it
could act as a positioning distress signal
9-1/2''
Tethered to a weight or anchor the Y makes an excellent lighted Buoy
Shallow or hazardous area can be easily marked to help safely navigate
through waterways
When trolling for fish and a "hit" is made the buoy can
quickly mark the spot for additional passes
Measuring /" overall with a "
visible height when floating the Y provides hours of continuous
flashing operation
This
Way
Up
(ON)
Upward in
Activating Position
Downward
in Storage
(OFF)
(Please view model LX on page for auxiliary / emergency selfpowered
LED watercraft lights that have flashing & steadyon features
)
SPECIFICATIONS
MODEL : Y-2
Voltage / Power Source: VDC / () Dcell
Flash Rate:
double flashes/min
Lamp Bulb / Lamp Life:
Xenon flash tube / hours
Brightness / Visibility:
Operational Modes:
Battery Life:
Optics: (inner lens)
Optics: (outer lens)
Base:
Weight:
Standard Features:
cd / degrees
Flashing
hours
Clear Polycarbonate fresnel
Polycarbonate
ABS
lbs
(with batteries)
• Stainless steel wall mounting bracket
• '' long lanyard
• Tilt switch operation:
Lens up “on” Lens Down “off”
Y-2 attached to life preserver
How to Order: EXAMPLE: Y-2 • A
MODEL
•
CODE
MODEL
CODE
COLOR
Y-2
Floating
Xenon
Strobe Light
A
B
C
R
Amber
Blue
Clear
Red
Y-2 attache
to buoy line
8
“D” CELL
POWERED
S
afety committees have been established in most businesses to
determine and implement measures to ensure the safety of their
employees especially when the evacuation of a facility is necessary
In most offices and factories cubicles and high partitions block the
visibility of the occupants and make it difficult for assigned safety marshals
to verify that all assigned areas have been vacated
Since emotions can run
high and confusion result in these emergency situations a safety marshal
can become disoriented and neglect to canvas his areas and erroneously
report that all persons have been evacuated
The Y "Last Person Out"
identifier strobe light serves as an excellent safety aid
When
strategically placed in its wall mounting bracket with the lens facing down
("off" position) throughout the facility the safety marshal merely reverses
the position of the Strobe in the bracket (lens "up") as they exit each area
and an immediate flashing light indicates that it has been cleared of
personnel
As a final check a quick scan for activated lights would confirm
the successful evacuation of designated areas
LED WARNING LIGHTS
Office and Industrial Safety - "Last person out" Signal
Y strategically
placed
(36) LED Warning Lights
VEHICLE POWERED - 12 VDC
MODEL LX-36
LX-36 – Unique optical design✽, very bright,
3-1/8''
vehicle flasher, maintenance free
✽
(see figure 1)
T
his newest technology precisely places each of the high output LED
in a specific location either behind individual magnifying diffuser lenses
or behind redial fresnel diffusers
This provides a high output signal at
visibility
6''
Each of the LED’s is perfectly positioned behind individual magnifying
diffuser lenses to maximize ° of warning light output
This is similar to the
brightness of new traffic signals
Featuring impact resistant polycarbonate
lens and base waterproof construction and long life ( hours) LED
technology the LX eliminates concerns of expensive bulb replacement and
high current draw
Utilizing the vehicle’s VDC battery system via a foot spiral/flat cord with
an inline on/off switch and cigarette plug adapter the LX produces triple flashes per minute
Five round magnets are embedded into the base
offering a scratch proof surface having a rated magnetic pull of pounds and
supports vehicle speeds up to mph
BULB REPLACEMENT ELIMINATED!
Magnified Light Beam (+60%)
Figure 1
LED
The warning light can be deployed at a moment’s notice and stored in the
trunk when not in use
Available in amber blue clear green and red
For use
in all applications where attention to vehicle personnel or dangerous
situations is warranted
Especially applicable for stationary vehicles (motor
“off”) where battery drain is minimized with only amp current draw
The
LX is highly visible ( ft
in daylight and conservatively / mile in dark
ness) yielding a light output of mcd
For permanent applications the unit can be directly wired into a V battery
source with dashboard switch i
e
trucks boats and construction equipment
Forklifts &
General Purpose
Vehicles
Optical
Lens
Diffused
Light Rays
“Luma-diffuser” Optical Design
(Technical Pictorial)
Rugged,
Vibration Resistant
How to Order: EXAMPLE: LX-36 • A
MODEL
•
CODE
LED WARNING LIGHTS
LX-36
VEHICLE
POWERED
MODEL
CODE
COLOR
() LED
Vehicle
Warning
Lights
A
Amber
B
Blue
✻ Green LEDs & Clear Lens
C
Clear
G✻
Green
R
Red
SPECIFICATIONS
MODEL : LX-36
Voltage / Power Source:
Power Consumption:
Flash Rate:
Lamp Bulb / Lamp Life:
Brightness / Visibility:
Operational Modes:
Optics: (inner lens)
VDC / Vehicle powered
amps
triple flashes/min
() super bright LEDs / hours
mcd / degrees
Flashing
Polycarbonate () segments of individual
magnifying diffuses
Clear Polycarbonate
ABS
lbs
• Magnetic Base rated at lb
pull
• ft
cord assembly with inline “on/off”
switch and cigarette lighter adapter
Optics: (outer lens)
Base:
Weight:
Standard Features:
9
“Flex Series” Warning Lights
HALOGEN ROTATOR & XENON STROBE
MODEL MS-FLX
MS-FLX & MSM-FLX Series – Suited
4-3/4”
for high impact & heavy vibration
B
oth units are suited for application with high impact and heavy vibration
The
quick disconnect brackets allow for easy removal of the warning light for trans
ferring or sharing with other vehicles
The light removal also allows vehicles to
be parked in low clearance garages
It also facilitates safe storage and helps prevent
theft
Radio interference filter included
Ideal for heavy construction and agricultur
al equipment refuse trucks and offroad terrain vehicles
MODEL :
MS-FLX MSM-FLX
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Voltage / Power Source: or VDC / Vehicle powered
Power Consumption:
amps
amps
Flash Rate:
flashes/min
flashes/min
Lamp Bulb / Lamp Life:
Xenon flash tube / hours
Halogen Bulb / hours
Brightness / Visibility:
joules / degrees
candle power / degrees
Operational Modes:
Flashing
Rotating
Optics: (inner lens)
Clear Polycarbonate fresnel
Metalized Steel Reflector
Optics: (outer lens)
Polycarbonate
Base:
Vulcanized rubber flex
Rubber flex
Weight:
lbs
Standard Features:
• Quick release mounting bracket (H or S)
• '' AWG red lead wire
Options:
• Rigid base
•
•
•
•
•
•
CODE
MS-FLX
MSM-FLX
MODEL
Xenon
Strobe
Halogen
Rotator
CODE
12
24
•
VOLT
VDC
VDC
CODE COLOR
A
Amber
B
Blue
R
Red
Pictured
with “S” side
mounting
bracket
MSFLX: Features unique base made of vulcan
ized rubber that permits full flexibility
MODEL MSM-FLX
Halogen
Rotator
11''
MS-FLX • 12 • A • H
EXAMPLE:
•
overall
height
Pictured
with “H”
horizontal
mounting
bracket
NOTE: Ordering MUST include a selection of “H” or “S” mounting bracket
How to Order:
MODEL
•
10''
overall height
with bracket
MSMFLX: Features fiberglass reinforced ABS
housing with a replaceable rubber flex base that
permits flexibility
A rugged rotator with
worm gear drive and sintered bronze bearing
CODE
S
MOUNTING
H
Horizontal
Side
Flex
Series
˚
flexibility
QUICK DISCONNECT MOUNTING SYSTEM
Lumastrobe
in operation
To remove loosen
thumb screw and
lift off – you can
store until
needed again
Easy replace
or transfer to
some other
equipment
10
14''
Mounting
bracket with
weather seal
in place
when not
in use
ROTATOR & STROBE LIGHTS
SPECIFICATIONS
14-1/4"
Xenon
Strobe
VEHICLE
POWERED
Xenon Strobe Lights
VEHICLE POWERED - 12 VDC
MODEL 412D &
MODEL SL & SL-FLX
2-3/8''
˚
flexibility
4-1/2''
5-1/4''
4-7/8''
Model - SL-FLX
Overall height with flex base: /''
Model SL
6-3/4''
“Slim-Lite” 2 Joule Xenon Strobe
Heavy Duty 4 Joule Xenon Strobe
O
(Permanent or Magnetic Mounting)
perating in multivoltages from to VDC without
any modifications or adjustments the “SlimLite”
accommodates a variety of applications
The elec
tronics are encapsulated to ensure longlife and trouble free
operation
A gasketed screwon lens provides a waterproof
seal as well as easy access for lamp replacement
Polycarbonate lens and ABS housing are impact resistant
Ideal for forklift trucks or construction equipment
C
omes standard with a vibration resistant circuit board
• Operates in multivoltages from to VDC without
any modifications or adjustments • lb
pull /“
diameter bottom magnet • Ideal for rural mail carriers plow
trucks and general purpose vehicles
When affixed with a flexible neoprene molded rubber base it absorbs
all vibration and prolongs strobe life
Strobe damage can be
prevented with its degree flexibility if contact with obstructions
are made
SPECIFICATIONS MODEL : SL
to VDC
Voltage:
Joules
Brightness:
flashes per min
Flash Rate:
Lamp/Bulb / Lamp Life: Xenon flash tube / hours
milliamps
Amp Draw:
Base:
XENON STROBE LIGHTS
Wire Leads:
MODEL : 412
Voltage:
Power Source:
Power Consumption:
Flash Rate:
Lamp Bulb / Lamp Life:
Brightness / Visibility:
Operational Modes:
Battery Life:
VDC or VDC
Vehicle battery
milliamps
single flashes per minute
Xenon flash tube / hours
joules / degrees
Flashing
Vehicle battery
Polycarbonate fresnel
heavy duty flanged aluminum
lbs
• Mounting hardware
• Rubber gasket
• Fuse
• '' AWG
Red & black lead wire
• Magnetic base (rated at lb
pull)
• ft
cord assembly with inline
“on/off” switch and cigarette
lighter adapter
Optics: (outer lens)
Base:
Weight:
Standard Features:
Polycarbonate lens
(Available in amber & red
/'' diameter x /'' high)
ABS base
/'' diameter x /'' high x /''
wide
Mounting Holes /'' dia
on /'' centers
'' AWG ° C red & black lead wires
Lens:
SPECIFICATIONS
Options:
Ideal for ForkLift Applications
How to Order: EXAMPLE: 412D • A • MC
MODEL
•
•
How to Order: EXAMPLE: SL-FLX • A
MODEL
•
CODE
SL
VEHICLE
POWERED
SL-FLX
VOLT
Rigid Mounting
(VDC)
Flex Mounting
(VDC)
CODE
COLOR
A
Amber
R
Red
CODE
MODEL
CODE
412D
VDC
412OA
VAC
A
B
C
G
P✻
R
✻ Purple lens is '' high
11
COLOR CODE OPTIONS
Amber
Blue
Clear
Green
Purple
Red
MC
Magnet
and Cord
set
Halogen Rotating Lights
VEHICLE POWERED - 12 VDC
MODEL HR
MODEL SML-H1
4-1/2''
6-1/4''
6''
-250
6"
6"
Model
HR-MC
6-3/4''
8''
3-1/4''
Powerful and Reliable Rotator
Rotating Halogen Warning Light
“Super Mighty” Rotating
Halogen Warning Light
ong term performance is assured with this reliable
halogen rotator that puts out a highly visible signal
This
precision engineered rotator features sintered bronze
bearings counter balanced reflector/rotating assembly and
nylon worm gear drive
Its flash rate at FPM is twice that
of most other rotators
Designed for applications requiring
extended uses
L
he Model SMLH is designed to provide for extended
use increased output and improved protective mount
ing
A robust gear drive mechanism operates at RPM
The base surface is recessed to accept () round magnets
which are covered with a molded rubber shield to protect the
mounting surface
Ideal for volunteer fire fighters police and
EMS workers
SPECIFICATIONS
MODEL : HR
SPECIFICATIONS
MODEL : SML-H1
Voltage:
Power Source:
Power Consumption:
Flash Rate:
Lamp Bulb / Lamp Life:
Brightness / Visibility:
Operational Modes:
Battery Life:
or VDC
Vehicle battery
amps
flashes per minute
watt halogen / hours
candle power / degrees
Rotating
Vehicle battery
Reflector
Polycarbonate
Fiberglass reinforced polypropylene
lbs
• Mounting hardware
• Rubber gasket
• Fuse
• '' AWG
Red & black lead wire
• Magnetic base (rated at lb
pull)
• ft
cord assembly with inline
“on/off” switch and cigarette
lighter adapter
Voltage:
Power Source:
Power Consumption:
Flash Rate:
Lamp Bulb / Lamp Life:
Brightness / Visibility:
Operational Modes:
Battery Life:
VDC
Vehicle battery
amps
flashes per minute
watt halogen / hours
candle power / degrees
Rotating
Vehicle battery
Reflector
Polycarbonate
ABS
lbs
• Magnetic base (rated at pull)
• ft
cord assembly with inline
“on/off” switch and cigarette
lighter adapter
Options:
Optics: (inner lens)
Optics: (outer lens)
Base:
Weight:
Standard Features:
How to Order: EXAMPLE: SML-H1 • A
MODEL
•
How to Order: EXAMPLE: HR • A • MC
MODEL
•
•
CODE
VOLT
CODE
HR
VDC
A
B
R
COLOR CODE OPTIONS
Amber
Blue
Red
MC
Magnet
and Cord
set
12
CODE
MODEL
CODE
COLOR
SML-H1
Halogen
Rotating
Warning
Light
A
B
G
P
R
Amber
Blue
Green
Purple
Red
VEHICLE
POWERED
HALOGEN ROTATING LIGHTS
Optics: (inner lens)
Optics: (outer lens)
Base:
Weight:
Standard Features:
T
Warning Signs - 18'' Octagonal
STANDARD & LIGHTED
MODEL S-2, S-S
MODEL BT-10-S-S
Model
S-2
Model
S-S
18''
13''
Rear View
with “RT”
option Tape
Sign
with
“FA” option
Model
BT10-SS
with
“RT” option
Front View
“FA” option
7''
54''
6''
BT-10 – Light Weight &
Bi-Directional
S-2 & S-S – 50% lighter &
Costs 30% less
A
A
“D” CELL
POWERED
LED WARNING SIGNS
new low cost signaling and warning device is achieved by
combining our Featherweight signs and BT Wand into a
single handheld lighted Stop Sign
This combo commands
immediate attention whether in flashing or steadyon mode
Although the Wand does not illuminate the sign it effectively
brings attention to the sign’s message
As an option two strips of ”
wide M reflective tape can be applied at the top & bottom on each side of
the sign for added visibility & protection
The hand held lighted sign can
easily be converted to a flagger model with the “FA” option
Quick release
clamps snap onto the Wand handle and a PVC pipe extension of ” [()
”sections]
s compared to aluminum & fiber board equivalents
these signs are the lightest and most effective “Stop”
and “Slow” warning signs available
These ultralight
signs weigh only ounces with a paddle handle
Featuring
extremely rugged corrugated polypropylene sign material and PVC
handles A must for crossing guards & traffic flow control personnel
Unlike common aluminum signs these products are shockproof thus
giving that added protection to the user when lightning storms are
present
These Signs have full ”octagon shape and easily identifiable
” lettering
As an option two strips of ” wide M reflective tape can
be applied at the top & bottom on each side of the sign for added
visibility & protection
A unique feature is that the Wand lights can be seen from both
sides of the sign
This provides extra protection to the user while
projecting a warning signal in two directions
Operator fatigue
is minimized utilizing this light weight (only lbs
with bat
teries) durable and weather proof signaling device
Operating
on () “D” cell alkaline batteries the Wand also serves as the
sign handle and provides over hours of continuous flash
ing operation
Ideal for crossing guards and traffic control per
sonnel in all weather conditions and especially on those over
cast days or at twilight when conditions are most dangerous
SPECIFICATIONS
SS
StopSlow
Handle Type:
P Paddle
'' Paddle
FFlagger
'' Flagger
P/F Kit (Paddle to Flagger) Conversion Kit ('' two piece staff)
How to Order: EXAMPLE: BT-10 • R • S-2 • RT
MODEL
•
•
•
How to Order: EXAMPLE: S-2 • P • RT
MODEL
•
•
CODE MODEL CODE COLOR CODE SIGN CODE OPTION
BT-10
Wand
Stop
Sign
Combo
R
Y
Red
S-2
Yellow
S-S
Stop/
Stop
Stop/
Slow
RT
FA
MODEL : S-2 & S-S
” Octagon Polypropylene sign with ” high letters and
” diameter handles
Sign Type:
Description:
StopStop
S
CODE MODEL CODE HANDLE CODE
Reflective
Tape
Strips
S-2
S-S
Flagger
Adapter
('')
P
Paddle
('')
RT
Reflective Tape
Strips
Stop/
F
Flagger
('')
PF KIT
Paddle to Flagger
Conversion Kit
Slow
13
OPTION
Stop/
Stop
Personal Warning Light & Flashlight
DUAL PURPOSE
MODEL PWL - Personal Warning Light
T
13/
4d
ia.
x
Drawing attention to one’s presence
Evening joggers, cyclists and walkers
Safety conscious motorists
Police, Fire and EMS workers
Crowd control
Outdoor campers and hikers
Emergency work crews
Airport service crews
Road construction crews
Crossing guards
Truckers
Evening boaters
And more....
Bright
Tungsten Lamp
flashlight
Siz
e-
•
•
•
•
•
•
•
•
•
•
•
•
•
63
/4
'' l
on
g
A Great
Gift Idea for
All Ages!
he Personal Warning Light (PWL) serves a dual purpose as a
warning light as well as a flashlight
The PWL provides a
usefulness and sense of security to all who carry it
The water
proof PWL is a perfect companion for:
Wrist
strap
Fresnel lens with bright red LED lamps
continuous flashing
for up to hours
On/Off button for
flashlight
On/Off button
for LED flasher
SPECIFICATIONS MODEL : PWL
Power Source:
Flash Rate:
Lamp Bulb:
AA batteries (not included)
hours continuously flashing mode
red LED bulbs (flasher) replaceable
GE flashlight bulb
Visibility:
up to / mile
Operational Modes: flashing
Optics: (outer lens) Polycarbonate
Handle:
Heavyduty ABS with switch for
both warning and flashing light
Weight:
oz
(with batteries)
Standard Features: • Magnetic base for attaching to
steel surfaces
Available
in
Blisterpacks!
screwon cover will
attach to any steel
surface
• Rugged
• Small
• Versatile
• Dependable
• Water Proof
AS A WARNING LIGHT
How to Order:
MODEL
•
EXAMPLE:
PWL • Y • BP • BH
•
CODE MODEL CODE HANDLE CODE
PWL
Personal
Warning
Light
14
LED WARNING LIGHTS
Model: BH
Belt Holster
(Black Nylon)
PACKAGE
Y
Yellow
BP
Blister pack
B
Black
BX
Plain white box
BH
Belt Holster
AA
Velcro
Fold Over
Retention Strap
Powered by AA batteries handle
comes in either
yellow or black
Magnetic base with
COMMAND IMMEDIATE ATTENTION,
with the Lumastrobe
Marshalling Wand!
MODEL BT-10
6”
Enhancer
he BT is a hand held light weight and
battery operated warning light
Containing bright red LED bulbs that flash times per
min
or steady “on”
It can be seen for more than
half a mile away
Ideal for traffic control school
crosswalk guards transport workers construction
road crews airport supervision parking attendants
crowd control and much more
T
Easily tucks into the trunk or
under the seat
Also available
with several options
12
”
Easily slips onto the Wand and
creates a ” wide reflector as
well as eliminating back reflec
tion on the person holding the
baton
Model EH
(slips onto BT)
'
''
1/2
13
21
'
1/2
Model W F
th
ng
e
L
all
r
e
Ov
(slips onto BT)
Wireform Support
Simple stainlesssteel wire holder supports
the Wand at ° to grade level
Safer than
flares no heat no flame no fumes!
'
4'
3/
1-
Storage Mode
Model HS
See Lighted Stop
Signs using BT-10
on page 10
(Clamps onto BT)
Stake Support
Quick release clamps provides compact storage mode as
well as ” high stake for marking in soft surfaces
Ideal
for construction sites/ski areas
Longer stakes available
upon request
“D” Cell
Powered
LED Warning Lights
SPECIFICATIONS - MODEL : BT-10
• Provides a reliable minimum of hours of
continuous flashing operation (with new
Dcell batteries)
• Easy grip handle with threeway rocker
Switch—Off Flash and Steady On
• Emits a bright red flash with LED bulbs
• Rugged polycarbonate refractor lens and ABS
handle
• Handy long life wrist strap and convenient
designedin belt attachment clip
• Weighs only one pound with () Dcell bat
teries
(Not included)
Extended Mode
(Belt Holster)
How to Order: EXAMPLE BT-10 • Y • EH
MODEL BT-10
•
CODE COLOR CODE
Y
Yellow
EH
WF
R
33 Greenwood Ave. , Midland Park, NJ 07432
1-800-775-5862 • Fax: 201-445-8575
www.LUMASTROBE.com
E-Mail: [email protected]
Model BH
Red
HS
BH
ATTACHMENT
Enhancer
Wireform Support
Stake Support
Wand Holder
Readily accessible &
visible at your side
Using the belt holster option
“BH” the Wand doesn’t restrict
user movements while carried in
storage or in flashing or steady
on modes at the user’s side
By
lifting a velcro strap the Wand
can be quickly deployed
PRSRT STD
U.S. Postage
PAID
Midland Park, NJ
Permit No.184