Download Murrelektronik GmbH Phone +49 7191 47-0 | Fax +49 7191 47

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Standby power wikipedia , lookup

History of electric power transmission wikipedia , lookup

Wireless power transfer wikipedia , lookup

Alternating current wikipedia , lookup

Electric power system wikipedia , lookup

Audio power wikipedia , lookup

Power over Ethernet wikipedia , lookup

Distributed generation wikipedia , lookup

Amtrak's 25 Hz traction power system wikipedia , lookup

Life-cycle greenhouse-gas emissions of energy sources wikipedia , lookup

Voltage optimisation wikipedia , lookup

Electrification wikipedia , lookup

Fault tolerance wikipedia , lookup

Power engineering wikipedia , lookup

Mains electricity wikipedia , lookup

Power supply unit (computer) wikipedia , lookup

Switched-mode power supply wikipedia , lookup

Power supply wikipedia , lookup

AC adapter wikipedia , lookup

Transcript
Murrelektronik GmbH
P.O.Box 1165 | D-71567 Oppenweiler
Falkenstraße 3 | D-71570 Oppenweiler
Phone +49 7191 47-0 | Fax +49 7191 47-130
www.murrelektronik.com
[email protected]
INDUSTRY REPORT
Contact person
Name:
Phone:
Fax:
email:
Tanja Rüther
+49 7191 47-4310
+49 7191 47-49 4301
[email protected]
First Class Power Supplies for a First Class Research Facility
A state-of-the-art research center is currently being built in Hamburg, Germany. When work is finished in 2016, the European XFEL will generate ultra
short X-ray flashes in a 3.4km tunnel. This will open up completely new possibilities in research to scientists around the world. Murrelektronik is
pleased to be a part of this groundbreaking project with the installation of
our Emparro power supply units and MB Redundancy Balance modules.
European XFEL's "X-Ray Optics & Beam Transport" team is responsible for the
transportation and manipulation of the X-ray beams. This happens in a 900m long
section where the X-ray light is transported through evacuated tubes. These tubes
require a vacuum pressure of less than 1x10-6 mbar. Vacuum valves, sliders, motors for positioning mirrors, monitoring engine coolant and compressed air as well
as other components are coordinated by controls.
Murrelektronik's Emparro power supply units are used for the 24V supply of the
controls that are located in cabinets along the tube as well as for the other components on-site. "There is a very practical reason for this," explains Timo Korsch,
physics engineer at European XFEL: "The control cabinets in the tunnel are only
1.2m high. Therefore, they require very simple wiring. Emparro power supply units
make this possible: they are connected with spring clamp terminals." The terminals are designed using push-in technology so connection wires can be mounted
in the front without using tools. The contacts are permanent and never need retightening.
Thanks to their efficiency rating of up to 95%, Emparro power supplies only lose a
small amount of energy. This means they don't dissipate much heat. "Less heat
dissipation means less cooling is required in the air-conditioned control cabinets
which saves energy and lowers costs", explains Timo Korsch.
In the future, researchers from all over the world will use the tunnel to conduct
experiments. As a result, it is very important that the facility work without interruption in order to maximize the amount of time available for research and experimentation. Access to the tunnels is blocked by a control system while the facility is
operating so they can only be entered for troubleshooting during scheduled
maintenance times.
As a result, the power supply is designed with redundancy. Two power supply
units each are operated with different phases. They are decoupled by a MB Redundancy Balance module that ensures equal loads on both power supply units.
As a result the life of the units increases significantly and, as Timo Korsch explains, "If one of the power supplies should fail, operations can continue until the
next scheduled maintenance day".
Both Emparro and MB Redundancy Balance feature signal contacts, this is an
additional benefit for the maintenance of the facility. "This provides the possibility
of remote diagnostics", says Timo Korsch. In the event of voltage drops, this information can be directly read.
(3027 characters)
Emparro_short facts:
- Up to 95% Efficiency Rating
- 50% Power Boost for up to 4 seconds
- Metal housing with optimum EMC characteristics
- No derating from -25 to +60°C
- Very narrow width
- High mains failure bridging time
Pictures:
European XFEL:
The state-of-the-art research center should be finished until 2016
Emparro_Familie:
Seven models – the solution for many applications
Efficiency:
Emparro's efficiency rating is up to 95% - an impressive result that means only 5%
of the energy remains unused.
Redundanz:
MB Redundancy Balance: Equal loads on both power supplies
Authors:
Michael Böhmerle und Manuel Senk,
Product manager Power Supplies at Murrelektronik GmbH in Oppenweiler