Download SubScribEr linE boArD

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Nominal impedance wikipedia , lookup

Printed circuit board wikipedia , lookup

Loading coil wikipedia , lookup

Transcript
subscriber line board
atlb
Features
▪▪ Is used for 2-wire connection of telephones as stations in an AlphaCom system
▪▪ Each board provides 6 telephone connections and 1 voice-switched conversation
▪▪ 6 remote control outputs (software configurable activation)
▪▪ Hotline function
▪▪ DTMF dialing
▪▪ R-button detection
▪▪ Selectable -48V or -24V battery feed
▪▪ 600 ohm or complex impedance hybrid balance
▪▪ Line monitoring using resistor in parallel with phone
▪▪ Hot plug in and out of the board
▪▪ Red/green/amber LED indicates system status
Description
This board contains circuitry for connection of 6 2-wire telephones as AlphaCom subscribers. The board
also provides one measurement channel for voice switching control. It plugs into any position 1 - 23. When
the hot-line function is activated for the station a preprogrammed number is dialed when the handset is
lifted. When the handset is replaced, another number is dialed.
The board provides 6 remote control outputs that are software-controlled. The line monitoring reports
errors on all subscriber lines. If the handset is left off for 1 hour (programmable timer) a line error is
reported. The board can be plugged in/out while the exchange is running. A hot plug-in cable is needed for
this purpose. The cable is included in the cable set for the exchange.
Specifications
Order Number
1009102000
Operation Voltage
5, 15, 24, 32 V DC
Dimensions (W x H x D)
10 mm x 230 mm x 263 mm, 0.39” x 8.97” x 10.26”
Double Extended Europe Format
S/N ratio (conversation)
45 dB
Input impedance
600 ohm
Frequency range conversation
300 - 3,400 Hz Crosstalk at 1 kHz
< -75 dB
Capacity for each ATLB board
6 subscribers
STENTOFON | DATASHEET
1009102000
www.stentofon.com
Zenitel Norway AS
Sandakerveien 24C, P.O. BOX 4498 Nydalen
NO-0403 Oslo, Norway
ORDER NUMBER
DESCRIPTION
SHIP WEIGHT
1009102000
AlphaCom Subscriber Line Board for DTMF stations, ATLB
0.5 kg / 1.1 lb.
Supplementary
equipment:
1009501031
1009930202
1009910120
1.5 m Flat Connection Cable with Filter Board
Subscriber Connection Board, Krone terminals
Distribution Field for Subscriber Connection Boards ATLB
subscriber line board atlb
Duplex-controlled conversations
1 voice-switched conversation per board
Remote control outputs
5 V 2.2 Kohm
Cable type
1-pair twisted cable per station
Max. cable length to station
0.5 mm2: 6 km
0.6 mm2: 8 km
0.9 mm2: 10 km
Distortion
< 2%
Indicator
LED (red/green/amber)
installation overview
connection board for atlb
ORDER NUMBER
1009102000
DOC NO
A100K10237 v.2.0
[email protected]
STENTOFON products are developed and marketed by Zenitel Norway AS. The company’s Quality Assurance System is certified to meet the requirements in NS-EN ISO 9001:2002. ZENITEL NORWAY AS reserves the right to modify
designs and alter specifications without prior notice, in pursuance of a policy of continuous improvement. © 2009 Zenitel Norway AS.