Download Sensorex RVDT INDUCTIVE ANGULAR POSITION SENSOR : SX27

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Rotary encoder wikipedia , lookup

Stepper motor wikipedia , lookup

Electric machine wikipedia , lookup

Mechanical-electrical analogies wikipedia , lookup

Control system wikipedia , lookup

Geophysical MASINT wikipedia , lookup

Mains electricity wikipedia , lookup

Rectiverter wikipedia , lookup

Nominal impedance wikipedia , lookup

Transformer types wikipedia , lookup

Potentiometer wikipedia , lookup

Resistive opto-isolator wikipedia , lookup

Resonant inductive coupling wikipedia , lookup

Opto-isolator wikipedia , lookup

Ohm's law wikipedia , lookup

Transcript
Sensorex
RVDT inductive ANGULAR position sensor :
SX27 RV series
general description
Rotary variable displacement transducers provide a sinusoidal output which is
proportional to the angle within the limits of its linear range.
When the primary is excited the position of the rotor will influence the magnetic flux
of each secondary winding and thus the transformation ratio. The difference in voltage
of the two secondaries will therefore be proportional to the relative angle of the
primary.
The zero position is found where the secondary outputs are equal and opposite. This
position is marked on the housing and spindle.
The core may rotate freely, but in practice measurements are made within
- Easy mounting
± 40° where the non linearity is 0.5% of full scale. Linearity improves
- Unlimited rotation
as the measurement range is reduced. For example over ± 5° non linearity
- Size 11 (27 mm diameter)
is typically better than ± 0.1% FS.
- ATEX version available
The RVDT must be used in conjunction with an oscillator-demodulator signal
conditioner. This RVDT is compatible with any of the SENSOREX LVDT conditioners.
The RVDT housing is a light anodised alloy with a 300 mm long (6 wires output) cables.
This RVDT is also available in intrinsically safe version, according to ATEX norm.
MEChANIcal SPECIFICATIONS (at 25°C)
Size
Weight (g)
Moment of inertia (g.mm.s2)
Maximum unbalance (g.cm)
Axis friction (g.cm)
Max radial force (end axis)
Max axial force
Bearing movement
Vibration resistance (20 - 200 Hz)
Shock resistance
92
12/06 SX 27 RV GB 1/2
International Business Park • Archamps • F-74166 Saint-Julien-en-Genevois
Tel. (+33) 450 95 43 70 • Fax (+33) 450 95 43 75 • Email : [email protected] • Web : www.sensorex.fr
11
42
9.5
0.3
1.1
36
44
classe P5
10 g crête
200 g
electrical specifications (at 25°C)
References
Excitation
Sensitivity
Impedance at 3,5 KHz
- primary
- secondary
Operating temperature
Sensitivity drift
Etendue de mesure
Linearity
SX27 RV 020
SX27 RV 60
SX27 RV 80
SX27 RV 120
2,2 Veff nominal - 3500 Hz nominal (from 400 to 15 KHz)
2,3 mV/V/°
± 10°
< ± 0,15 % FSO
140 Ohm
30 Ohm
- 40 to + 125 °C (- 55 to + 150 °C optional)
< 0,08 % / °C of measure
± 30°
± 40°
< ± 0,25 % FSO
< ± 0,5 % FSO
± 60°
< ± 1,5 % FSO
SX27 RV XX
Range in degrees
Intrinsically safe version, according to ATEX norm : consult us.
93
12/06 SX 27 RV GB 2/2
International Business Park • Archamps • F-74166 Saint-Julien-en-Genevois
Tel. (+33) 450 95 43 70 • Fax (+33) 450 95 43 75 • Email : [email protected] • Web : www.sensorex.fr
ELECTRONICS AND MICROELECTRONICS
Selection guide
DISPLACEMENT SENSORS
INERTIAL SENSORS AND SYSTEMS
interface drawing
INTRODUCTION - GENERAL SUMMARY
Sensorex