Download MV Starters

Medium Voltage Starter Sales Checklist
Complete and return this Medium Voltage Check List to assist in the
engineering process of providing a properly manufactured Solid State Starter,
which will meet customer specific requirements. Complete each section as this
will ensure a timely and accurate response.
Project Name and/or End-User:
Contact Name:
Phone Number:
Email:
SECTION A – Starter Application:
Type of application
Present starting method:
Across the Line
Wye-Delta
Auto Transformer
Other:
Starts / Stops per day:
1-5
6 -10
11-15
16-20
Over 20
(please specify)
Current Acceleration
Time
1-5 seconds
6-10 seconds
16-20 seconds
>20 seconds
11-15 seconds
(please specify)
Current Deceleration
Time (if applicable)
1-5 seconds
6-10 seconds
16-20 seconds
> 20 seconds
11-15 seconds
(please specify)
Power source
Utility (Transformer feed capacity – kVA)
Short Circuit MVA (I)
Delta
Wye
3 wire
4 wire
Delta, Corner Grounded
High resistance ground
Solid Ground
(please specify)
Ungrounded
Generator (Generator kW rating)
(please specify)
100-035 Rev. D
Date: 07/02/2014
1 of 4
Approval: Kaizen Team
Medium Voltage Starter Sales Checklist
Distance from Line to starter:
< 250 ft.
251 - 500 ft.
501 - 750 ft.
> 750 ft.
(please specify)
Conductor type:
Shielded
Non-Shielded
Distance from Starter to motor :
< 250 ft.
251-500 ft.
501-750 ft.
> 750 ft.
(please specify)
Size and Quantity of Conductors: Line side Size:
Load side Size:
Line side Quantity:
/ PHASE
Load side Quantity:
/PHASE
SECTION B - Motor Data:
Type of motor:
Induction
Synchronous
Wound Rotor
Horsepower:
(If Synchronous or Wound Rotor, see Section “E” or “F” for additional questions.)
Motor voltage:
2300
4160
6900
13,800
Frequency:
25 Hz
50 Hz
60 Hz
Other:
Other:
(please specify)
(please specify)
NEMA Design:
FLA:
100-035 Rev. D
“A”
Service Factor:
“B”
“C”
Motor LRA:
Date: 07/02/2014
2 of 4
“D”
“E”
Motor Speed (RPM):
Approval: Kaizen Team
Medium Voltage Starter Sales Checklist
SECTION C - Enclosure / Environment Data:
Expected ambient temperature:
Space heater:
Yes
Minimum:
No
“ High
Size limitation:
Altitude:
Maximum:
(Space Heater required if less than 0 C)
Physical Location:
Indoor
Outdoor
“ Wide
( please indicate above dimensions. )
up to 3,300ft.
“ Deep
above 3,300ft.
(please specify)
Excessive Vibration and or Noise:
Color:
Vibration
Beige
Noise
ANSI 61 Grey
Other:
(standard)
Cable Entry location:
Top
Bottom
Neither
(please specify)
Cable Exit location:
Top
(standard)
Horizontal Bus:
Bottom
(standard)
NONE
800Amp
1200Amp
2000Amp
(standard)
Other:
(please specify)
Insulation on Bus:
Yes (price adder)
No
(standard)
UL Rating (NEMA Type):
1
3R
12
Other:
(standard)
(please specify)
SECTION D - Miscellaneous:
Disconnect:
Fusible Disconnect
Starting Method:
Keypad
None
2-Wire Control
3-Wire Control
(standard)
Other:
(please specify)
Across-The-Line Starting Option:
Yes
No
(standard)
100-035 Rev. D
Date: 07/02/2014
3 of 4
Approval: Kaizen Team
Medium Voltage Starter Sales Checklist
Will any of the following be present?:
Power Factor Correction Capacitors
Note: PFCC must be located on the Line side of
the Starter and must be isolated from the line
during starting.
Lightning Arrestors
Note: May be placed on either the
Line or Load side of the Starter.
Surge Capacitors
Note: Must be at the motor terminals and
must be isolated during starting to prevent
Starter damage.
SECTION E – Synchronous Motor Data:
Normal Field Current: (ADC)
Max Field Current: (ADC)
Field Discharge Resistor Rating:
Synchronous Motor Field Voltage: (VDC)
SECTION F – Wound Rotor Motor Data:
Wound Rotor Motor:
Starting Duty Resistor
Continuous Running Duty Resistor
Quantity of steps/resistance:
Present number of steps:
Secondary Voltage: (VAC)
Secondary Current: (Amps)
SECTION G – Additional Modifications, Accessories and/or Information:
Customer’s Signature
Customer’s Company
Date
100-035 Rev. D
Date: 07/02/2014
4 of 4
Approval: Kaizen Team