Download Antaris 9.5 kW - West Coast Solar and Wind

Technical Specifications ANTARIS 9.5 kW
Working grid feed in at 2.5 m/sec. wind speed after start up, depending on the repeller. Purpose built for inland
areas with low untill moderate wind speed. From an average wind speed with 7.5 m/sec. we use a repeller with
5.3 m diameter!
Generator

Permanent-magnet rotor, brushless, gearless, maintenance-free

Extremely strong permanent magnets for a high level of efficiency (NdFeBo permanent magnets, resistent to
temperatures up to 150° C)

Special ball bearings for reliably taking up radial and axial forces

3-phase current

Separate rectifier

Either direction of rotation

Voltage 0-1000 VDC

Start of feed-in at approx. 65 rpm

Power: 10.500 watts at 255 rpm and 400 VDC

Evenly rising power curve

Weight: 160 kg

Aluminium housing, surface cooling, base anchoring

Protection class IP56
Rotor

Hub connection with aluminium flange and pressure-relief plate

Stainless-steel screw connections with locknuts

Three rotor blades in glass-fibre / carbon-fibre laminate

Computer-designed aerodynamic profile

Winglets on blade tips to minimise noise

Approx. 6.50 m diamater (optionally 5.3 m > 7.5 m/s average wind speed)

Weight of each blade: approx. 14.0 kg

Dynamically and statically balanced

Direction of rotation anticlockwise viewed from front

Max. rotational speed 200 rpm

GRP spinner cap

Rotor colour to client specification
Support element comprising

Wind vane (weatherproof HDPE, off-white, slightly transparent)

Square stainless-steel tube as support element

All screw connections in stainless steel and fitted with locknuts

Steel bracket as support for generator, configured for plug-in connection with azimuth bearing, fully
galvanised

Protected by patented rotor-blade positioning system

Mast adapter with flange connector (tube 220 mm)
Storm protection

Rotor-blade positioning (“helicopter position”)

Voltage monitoring with 20.0 kW braking resistance

Generator short-circuit

Temperature monitoring from Alternator and Inverter
Control cabinet

Control system with Turbine Power Curve

3-phased grid-feed in with Smart!wind Inverter 10.5 kW

Control electronics with 3-phased turbine controller

Connections / plug connectors protected against polarity reversal

Controlling of the 3 alternator phases during turbinemode

Reset switch with key (removable)

Emergency-OFF switch

12.0 kW braking resistance

Rectifier, display etc.
ANTARIS 9.5 kW
size difference between ANTARIS 3.5 kW and 9.5 kW
The Alternator CK18 for ANTARIS 9.5 kW. 11.0 kW @ 255 rpm, max. 22 kW. Maximum power for wind,
water and CHP!
ANTARIS 9.5 kW Power curve
ANTARIS 6.5 kW production scheme
(Blue = Power per day, Red = Peak Power)