Survey
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
A C 4 B C 1 C3 C2 A Current Voltage B Current Voltage C 1 2 Voltage 3 4 Time Figure 1. Schematic overview of the principle of MFC and the different measurement techniques for electrochemical characterization. A: Cyclic voltammogram of an anode enriched microbial consortium; B: Cyclic voltammogram of a hexacyanoferrate cathode; C: Guidelines for MFC experiments 2 evolution of the potential over time of an anode (─) and a cathode (─) during the current interrupt method A B C E F D Figure 2. Types of MFCs used in studies: (A) easily constructed system containing a salt bridge (shown by arrow); (B) four batch type MFCs where the chambers are separated by the membrane (without a tube) and held together by bolts; (C) as B but with a continuous flow through anode (granular graphite matrix) and close anode-cathode placement; (D) photoheterotrophic type MFC; (E) single-chamber, air-cathode system in a simple “tube” arrangement; (F) two chamber H-type system showing anode and cathode chambers equipped for gas sparging. Guidelines for MFC experiments A B 3 C E D Figure 3. MFC used for continuous operation. (A) Upflow, tubular type MFC with inner graphite bed anode and outer cathode; (B) Upflow, tubular type MFC with anode below and cathode above, the membrane is inclinated; (C) flat plate design where a channel is cut in the blocks so that liquid can flow in a serpentine pattern across the membrane; (D) single – chamber system with an inner concentric air cathode surrounded by a chamber containing graphite rods as anode; (E) stacked MFC, in which 6 separate MFC are joined in one reactor block Guidelines for MFC experiments 4 Cell voltange / V 0.8 A 0.6 0.4 0.2 A B Power / mW 0.0 15 A B B 10 5 0 0 10 20 30 40 Current / mA Figure 4. Polarization (A) and power (B) curves of a microbial fuel cell operating on starch. Curves A are the original data from (Niessen, Schröder et al. 2004); Curves B represent a mathematically manipulated dataset in which the effect of the change of the internal fuel cell resistance from 10 Ω to 30 Ω is illustrated.