Download HMC724LC3

HMC724LC3
v01.0212
14 Gbps FAST RISE TIME
1:2 FANOUT BUFFER
High Speed Logic - SMT
Typical Applications
Features
The HMC724LC3 is ideal for:
Inputs Terminated Internally to 50 Ohms
• 16 G Fiber Channel
Differential Inputs are DC Coupled
• RF ATE Applications
Propagation Delay: 110 ps
• Broadband Test & Measurement
Fast Rise and Fall Times: 19 / 18 ps
• Serial Data Transmission up to 14 Gbps
Power Dissipation: 300 mW
• Clock Buffering up to 14 GHz
16 Lead Ceramic 3x3 mm SMT Package: 9 mm 2
Functional Diagram
General Description
The HMC724LC3 is a 1:2 Fanout Buffer designed to
support data transmission rates up to 14 Gbps, and
clock frequencies as high as 14 GHz. All differential
inputs and outputs are DC coupled and terminated on
chip with 50 Ohm resistors to ground. The outputs may
be used in either single ended or differential modes,
and should be AC or DC coupled into 50 Ohm resistors
connected to ground.
All differential inputs to the HMC724LC3 are CML and
terminated on-chip with 50 Ohms to the positive supply,
GND, and may be DC or AC coupled. The differential
CMl outputs are source terminated to to 50 Ohms
and may also be AC or DC coupled. Outputs can be
connected directly to a 50 Ohm ground-terminated
system or drive devices with CML logic input. The
HMC724LC3 operates from a single -3.3 V supply and
is available in ROHS-compliant 3x3 mm SMT package.
Electrical Specifications, TA = +25 ºC, Vee = -3.3 V
Parameter
Conditions
Power Supply Voltage
Typ.
Max
-3.6
-3.3
-3.0
Units
V
Power Supply Current
90
mA
Maximum Data Rate
14
Gbps
Maximum Clock Rate
14
GHz
Input Voltage Range
-1.5
0.5
V
Input Differential Range
0.1
2.0
Vp-p
Input Return Loss
10
dB
Single-Ended, peak-to-peak
550
mVp-p
Differential, peak-to-peak
1100
mVp-p
Output High Voltage
-10
mV
Output Low Voltage
-560
mV
19 / 18
ps
Output Amplitude
Output Rise / Fall Time
1
Min.
Frequency <14 GHz
Single-Ended, 20% - 80%
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
www.BDTIC.com/Hittite/
HMC724LC3
v01.0212
14 Gbps FAST RISE TIME
1:2 FANOUT BUFFER
Electrical Specifications (continued)
Conditions
Min.
Typ.
27
dB
rms
0.2
ps rms
Small Signal Gain
δ - δ, 215 -1 PRBS input [1]
D1 to D2 Data Skew, tSKEW
15 -1
[1] Deterministic jitter measured at 13 GHz with a 300 mVp-p, 2
+25C
+85C
-40C
VOUT DIFFERENTIAL (mVp-p)
DC CURRENT (mA)
<2
ps
1500
100
95
90
85
80
75
-3.6
-3.5
-3.4
-3.3
-3.2
-3.1
-3
1400
+25C
+85C
-40C
1300
1200
1100
1000
900
-3.7
-2.9
-3.6
-3.5
SUPPLY VOLTAGE (V)
-3.4
-3.3
-3.2
-3.1
-3
-2.9
-3.1
-3
-2.9
SUPPLY VOLTAGE (V)
Output Differential Voltage vs. Frequency [3]
Rise / Fall Time vs. Supply [1]
1300
25
1200
RISE/FALL TIME (ps)
VOUT DIFFERENTIAL (mVp-p)
ps
ps
Output Differential Voltage
vs. Supply Voltage [2]
[1]
105
1100
1000
900
800
23
21
19
tr
tf
17
700
600
2
6
110
PRBS input sequence.
110
70
-3.7
dB
2
Propagation Delay, td
DC Current vs. Supply Voltage
Units
10
Random Jitter JR
Deterministic Jitter, JD
Max
Frequency <14 GHz
High Speed Logic - SMT
Parameter
Output Return Loss
4
6
8
10
12
14
15
-3.7
16
[1] Data rate = 13 Gbps
[2] Frequency = 10 GHz
-3.6
-3.5
-3.4
-3.3
-3.2
SUPPLY VOLTAGE (V)
FREQUENCY (GHz)
[3] Vee = 3.3 V
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
www.BDTIC.com/Hittite/
2
HMC724LC3
v01.0212
14 Gbps FAST RISE TIME
1:2 FANOUT BUFFER
Output Return Loss vs. Frequency
Input Return Loss vs. Frequency
3
0
-5
-10
-10
RETURN LOSS (dB)
RETURN LOSS (dB)
High Speed Logic - SMT
0
-15
-20
-25
-30
-20
-30
-40
-35
-40
0
2
4
6
8
FREQUENCY (GHz)
10
12
14
-50
0
2
4
6
8
10
12
14
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
www.BDTIC.com/Hittite/
HMC724LC3
v01.0212
14 Gbps FAST RISE TIME
1:2 FANOUT BUFFER
[1] Test Conditions:
Pattern generated with an Agilent N4903A Serial BERT.
Eye Diagram presented on a Tektronix CSA 8000.
Device input = 10 Gbps PN code, Vin = 300 mVp-p differential.
Both output channels shown.
Timing Diagram
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
www.BDTIC.com/Hittite/
High Speed Logic - SMT
Eye Diagram
4
HMC724LC3
v01.0212
14 Gbps FAST RISE TIME
1:2 FANOUT BUFFER
High Speed Logic - SMT
Absolute Maximum Ratings
Power Supply Voltage (Vee)
-3.75 V to +0.5 V
Input Signals
-2 V to +0.5 V
Output Signals
-1.5 V to +1 V
Continuous Pdiss (T = 85 °C)
(derate 17 mW/°C above 85 °C)
0.68 W
Thermal Resistance (Rth j-p) Worst
case junction to package paddle
59 °C/W
Maximum Junction Temperature
125 °C
Storage Temperature
-65 °C to +150 °C
Operating Temperature
-40 °C to +85 °C
ESD Sensitivity (HBM)
Class 1C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING:
30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05 mm DATUM -C6. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
7. PADDLE MUST BE SOLDERED TO GND.
5
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
www.BDTIC.com/Hittite/
HMC724LC3
v01.0212
14 Gbps FAST RISE TIME
1:2 FANOUT BUFFER
Pin Descriptions [1]
Function
Description
1, 4, 5, 8, 9, 12
GND
Signal Grounds
2, 3
10, 11
D1P, D1N
D2N, D2P
Differential Data Inputs, Current Mode Logic (CML)
referenced to positive supply.
6, 7
DINP, DINN
Differential Data Outputs, Current Mode Logic (CML)
referenced to positive supply.
13, 16
Vee
Negative Supply
14,
Package Base
GND
Supply Ground
15
N/C
No Connection required. This pin may be connected
to RF/DC ground without affecting performance.
Interface Schematic
High Speed Logic - SMT
Pin Number
[1] Contact HMC for alternate pinouts
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
www.BDTIC.com/Hittite/
6
HMC724LC3
v01.0212
14 Gbps FAST RISE TIME
1:2 FANOUT BUFFER
High Speed Logic - SMT
Evaluation PCB
List of Materials for Evaluation PCB 122520 [1]
Item
Description
J1 - J6
PCB Mount SMA RF Connectors
J7, J9
DC Pin
C1
4.7 µF Capacitor, Tantalum
C5
100 pF, Capacitor 0402 Pkg.
U1
HMC724LC3
High Speed Logic, Fanout Buffer
PCB [2]
122518 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25FR or Rogers 4350
7
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground leads should be connected directly to the
ground plane similar to that shown. The exposed
packaged base should be connected to GND. A
sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from
Hittite upon request.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
www.BDTIC.com/Hittite/
HMC724LC3
v01.0212
14 Gbps FAST RISE TIME
1:2 FANOUT BUFFER
High Speed Logic - SMT
Application Circuit
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
www.BDTIC.com/Hittite/
8