Download Auxiliary Power Supplies

Auxiliary Power Supplies
I NT RODUCT I ON 4/8 Series
Power Supplies
Keypad Link
N/A
SP ECI FI CAT I ON & DESIGN
The auxiliary power supplies are additional 15 V
power
sources that are used to power additional keypads and
contact closure interfaces, when the power supply capacity of the processor is exceeded. A 4 Series P5 processor
can power a maximum of 150 LEDs. An 8 Series P5 processor can power a maximum of 350 LEDs. Wireless series
processors do not power keypads because each RF keypad
is powered locally. For keypad LED counts, see Table 1 on
pg. 40.
Plug-In Auxiliary
Power Supply
(T120-15DC-9-BL)
P l ug - in A U X I L I A R Y P ower S upp l y
( M ode l # T 1 2 0 - 1 5 D C - 9 - B L )
The plug-in auxiliary power supply can power a maximum
of 150 additional LEDs.
FRONT ROOM W a l l - mounted A U X I L I A R Y P ower S upp l y
( M ode l # P P S 1 - 1 2 0 - 1 5 D C - 3 A &
PPS2-120-15DC-3A)
The wall-mounted auxiliary power supplies can power a
maximum of 500 additional LEDs (PPS1) or 1000 additional LEDs (PPS2).
BA CK R OO M
Wall-Mounted
Auxiliary Power Supplies
(PPS1-120-15DC-3A and
PPS2-120-15DC-3A)
A PPE ND IX
182
Technical Support • 24 Hours a Day/7 Days a Week • 1.800.523.9466
Auxiliary Power Supplies (cont.)
Model Number
T120-15DC-9-BL: A
wall plug-in transformer power supply used to support an additional
150 LEDs on a wired keypad link.
Input Voltage
120 V
Regulatory Approvals
UL, NOM
Environment
Ambient operating temperature­: 0 °C to 40 °C, 32 °F to 104 °F
Ambient operating humidity: 0-90% humidity, non-condensing. Indoor use only.
Line-Voltage Connections
Wall plug-in.
Output Voltage
15 V
Output Current
900 mA
Dimensions
21⁄4 in (5.715 cm) x 31⁄2 in (8.89 cm) x 2 in (5.08 cm); cord length is
6 feet (1.8 m)
Mounting
Wall plug-in with 6-foot cord must be spliced into keypad link and reach a 120 V
receptacle. The transformer may be screwed into the receptacle’s faceplate.
Shipping Weight
1.8 lbs. (0.8 kg)
60 Hz 19 W
SP ECI FI CAT I ON & DESIGN
Wall-Mounted Auxiliary Power Supply
Model Number
PPS1-120-15DC-3A:
PPS2-120-15DC-3A:
Input Voltage
PPS1-120-15DC-3A: 120 V
PPS2-120-15DC-3A: 120 V
Regulatory Approvals
UL, CSA
Environment
Ambient operating temperature­: 0 °C to 40 °C, 32 °F to 104 °F
Ambient operating humidity: 0-90% humidity, non-condensing. Indoor use only.
Cooling
Passive cooling. Mount in a place where the vented cover will not be blocked.
Heat Generated
Fully Loaded
PPS1-120-15DC-3A: 65 BTUs per hr. maximum.
PPS2-120-15DC-3A: 130 BTUs per hr. maximum.
Line-Voltage Connections
Use copper wire only, supply conductors 60 / 75 °C. DIN rail-mounted terminal blocks for
power supply feed located at top left corner of panel. Terminal blocks should be tightened to 3.5-5.0 in.-lbs. (0.40-0.57 N•m). See Fig. 3, pg. 184.
DIN Rail
Terminal Blocks
Terminal blocks will accept one #18-10 AWG (1.0-2.5 mm2) wire or two #18-16 AWG
(1.0-1.5 mm2) wires. Terminal blocks should be tightened to 3.5-5.0 in.-lbs. (0.40-0.57 N•m).
Output Voltage
15 V
Output Current
6 A Max. (3 A max per input / output board)
Dimensions
91⁄4 in (23 cm) x 171⁄4 in (44 cm) x 37⁄8 in (9.8 cm)
Mounting
Enclosure may be surface-mounted or flush-mounted. See Fig. 3, pg. 184.
Construction
Enclosure: 16-gauge galvanized sheet metal (unpainted).
Cover: Painted (black) metal cover with ventilation holes. Attach using four
phillips-head screws.
Shipping Weight
13 lbs. (5.9 kg)
An enclosure-mounted power supply used to support an additional
500 LEDs on a wired keypad link.
An enclosure-mounted power supply used to support an additional
1000 LEDs on a wired keypad link.
50 / 60 Hz 360 W
50 / 60 Hz 720 W
BA CK R OO M
A PPE ND IX
Technical Support: [email protected]
FRONT ROOM http://resi.lutron.com
I NT RODUCT I ON Plug-In Auxiliary Power Supply
183
Auxiliary Power Supplies (cont.)
I NT RODUCT I ON 21⁄4 in
(5.715 cm)
2 in
(5.08 cm)
31⁄2 in
(8.89 cm)
SP ECI FI CAT I ON & DESIGN
Figure 1 – T120-15DC-9-BL Dimensions
Figure 2 – T120-15DC-9-BL
Low-Voltage Wiring
PPS1-120-15DC-3A
PPS2-120-15DC-3A
120 V
Wiring Entry
FRONT ROOM 63⁄4 in.
(170 mm)
11⁄4 in.
(32 mm)
Keyholes for
surface mounting
(3 places)
.312 in. dia.
(8 mm)
Assembly
Feed
.624 in. dia.
(16 mm)
171⁄4 in.
(440 mm)
14 in.
(360 mm)
Power
Supply 2
Power
Supply 1
Power
Supply 1
BA CK R OO M
Input/
Output Board 2
(see Figure 3)
Input/
Output
Board 1
Input/
Output Board 1
(see Figure 3)
10 in.
(250 mm)
A PPE ND IX
Screws
for recess
mounting
Figure 3 – PPS Dimensions and Mounting
184
Technical Support • 24 Hours a Day/7 Days a Week • 1.800.523.9466
I NT RODUCT I ON HomeWorks® Processor
(8 Series Shown)
Auxiliary Power Supplies (cont.)
HomeWorks Processor
(8 Series Shown)
Keypad Link
SP ECI FI CAT I ON & DESIGN
Keypad Link
In from Processor
To Additional Keypads:
Input/Output Board 2 (PPS2 Only)
10 Keypads Max per home run
1000 ft. (305 m) Max wire
length per home run
4000 ft. (1 220 m) Max wire
length total per
processor link
FRONT ROOM In from Processor
Input/Output Board 1
Figure 4 – PPS Low-Voltage Wiring
Keypad Link OUT
1
2
3
4
BA CK R OO M
Common
+15 V
MUX
MUX
Common
+15 V
MUX
MUX
Spare Fuse
1
2
3
4
Fuse
Harness to
power supply
Common
+15 V
MUX
MUX
1
2
3
4
A PPE ND IX
Keypad Link IN
Common
+15 V
MUX
MUX
1 2 3 4
Figure 5 – PPS Input/Output Board Wiring Detail
http://resi.lutron.com
Technical Support: [email protected]
185