Download Trigonometric ratios of an angle of any size

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Pythagorean theorem wikipedia , lookup

Perceived visual angle wikipedia , lookup

Euler angles wikipedia , lookup

Trigonometric functions wikipedia , lookup

Transcript
Trigonometric ratios
of an angle of any size
Knowledge of the trigonometrical ratios sine, cosine and tangent, is vital in very many fields of
engineering, mathematics and physics. This unit explains how the sine, cosine and tangent of
an arbitrarily sized angle can be found.
In order to master the techniques explained here it is vital that you undertake plenty of practice
exercises so that they become second nature.
After reading this text, and/or viewing the video tutorial on this topic, you should be able to:
• define the ratios sine, cosine and tangent with reference to projections.
• use the trig ratios to solve problems involving triangles.
Contents
1
1. Introduction
2
2. Trig ratios for angles in a right-angled triangle
2
3. Angles
3
4. The sine of an angle in any quadrant
4
5. The cosine of any angle
5
6. The tangent of any angle
6
c mathcentre February 12, 2004
1. Introduction
In this session we are going to be looking at the definitions of sine, cosine and tangent for any
size of angle. Let’s first of all recall sine, cosine and tangent for angles in a right-angled triangle.
2. Trig ratios for angles in a right-angled triangle
Refer to the triangle in Figure 1.
HY
PO
TE
NU
SE
OPPOSITE (OPP)
(H
YP
)
A
ADJACENT (ADJ)
Figure 1. The side opposite the right-angle is called the hypotenuse
The side that is the longest side in the right-angled triangle and that is opposite the right angle
is called the hypotenuse, or HYP for short.
The side that is opposite the angle A is called the opposite side, or OPP for short.
The side that runs alongside the angle A, and which is not the hypotenuse is called the adjacent
side, or ADJ for short.
Recall the following important definitions:
Key Point
sin A =
OPP
HYP
cos A =
ADJ
HYP
tan A =
OPP
ADJ
However, these are defined only for acute angles, these are angles less than 90◦ . What happens
if we have an angle greater than 90◦ , or less than 0◦ ? We explore this in the following section.
c mathcentre February 12, 2004
2
3. Angles
Consider Figure 2 which shows a circle of radius 1 unit centred at the origin. Imagine a point
P on the circle which moves around the circle in an anticlockwise sense.
1
1
P
P
O
-1
1
x
O
-1
-1
-1
1
1
-1
O
1
x
-1
O
1
x
1
x
P
P
-1
-1
Figure 2. Angles measured anticlockwise from the positive x axis are deemed to be positive angles.
In the first diagram in Figure 2 the angle is acute, that is, it is greater than 0◦ but less than
90◦ . When P moves into the second quadrant, the angle lies between 90◦ and 180◦ . The angle
is now obtuse. When P moves into the third quadrant, the angle is greater than 180◦ but less
than 270◦ . Finally in the fourth quadrant, the angle is greater than 270◦ but less that 360◦ .
Consider now Figure 3. On these diagrams the arm OP is moving in a clockwise sense from the
positive x axis. Such angles are conventionally taken to be negative angles.
1
1
-1
O
1
x
O
-1
P
1
x
1
x
P
-1
-1
1
1
P
P
-1
O
-1
1
x
-1
O
-1
Figure 3. Angles measured clockwise from the positive x axis are deemed to be negative angles.
So, in this way we understand what is meant by an angle of any size, positive or negative. We
now use these ideas together with our earlier definitions of sine, cosine and tangent in order to
define these trig ratios for angles of any size.
3
c mathcentre February 12, 2004
4. The sine of an angle in any quadrant
Consider Figure 4 which shows a circle of radius 1 unit.
y
1
P
θ
O
x
1
Figure 4. The side opposite θ has the same length as the projection of OP onto the y axis Oy.
The arm OP is in the first quadrant and we have dropped a perpendicular line down from P to
the x axis in order to form the right-angled triangle shown.
Consider angle θ. The side opposite this angle has the same length as the projection of OP onto
the y axis. So we define
sin θ =
projection of OP onto Oy
OP
= projection of OP onto Oy
OPP .
since OP has length 1. This is entirely consistent with our earlier definition of sin θ as HYP
Moreover, we can use this new definition to find the sine of any angle. Note that when the arm
OP has rotated into the third and fourth quadrants the projection onto Oy will be negative.
Let’s have a look at what that means in terms of a graph. Figure 5 shows the unit circle and
the arm in various positions. The graph alongside is the projection of the arm onto the y axis.
Corresponding points on both the circle and the graph are labelled A, B, C and so on. In other
words this is the graph of sin θ.
B
B
A
A
360◦
θ
E
E
θ
C
C
D
D
Figure 5. The graph of sin θ can be drawn from the projections of the arm onto the y axis
We can produce a similar diagram for negative angles and we will obtain the graph shown in
Figure 6. The whole pattern is reproduced every 360◦ . In this way we can find the sine of any
angle at all. Note also that the sine has a maximum value of 1, and a minimum value of −1.
The graph never moves outside this range of values. To the left of −360◦ and to the right of
c mathcentre February 12, 2004
4
+360◦ the basic pattern simply repeats. This behaviour corresponds to arm OP moving around
the circle again.
1
0
◦
◦
-360
360
-1
Figure 6. The graph of sin θ extended to include negative angles
5. The cosine of any angle
To explore the cosine graph refer to Figure 7.
y
1
P
θ
O
1
x
Figure 7. The side adjacent to angle θ has a length equal to the projection of OP onto the x axis.
ADJ
We know that cos θ =
. The length of the adjacent side is the same as the length of the
HYP
projection of the arm OP onto the x axis. Hence we take the following as our definition of
cosine:
cos θ =
projection of OP onto Ox
OP
= projection of OP onto Ox
since we are considering a unit circle and so OP = 1.
We can produce a graph as we did previously for sin θ by finding the length of the projection of
the arm OP onto the x axis. This is done by looking down on the arm from above as shown in
Figure 8. For example, when θ = 0, (point A), the projection has length 1. When θ = 90◦ , the
projection looks like a single point and has length zero (point B). When θ moves into the second
and third quadrants, the x projection, and hence cos θ, is negative. In the fourth quadrant, the
5
c mathcentre February 12, 2004
x projection, and hence cos θ, is positive.
B
A
P
C
θ
P
B
A
D
O
D
360◦ θ
C
Figure 8. Look down on OP from above to find the projection of OP onto the x axis.
We can continue in this fashion to produce a cosine graph for negative angles. Doing so will
result in the graph shown in Figure 9.
1
◦
◦
360
-360
-1
Figure 9. The graph of cos θ extended to include negative angles.
This is a periodic graph. The same shape repeats every 360◦ as we move further to the left and
to the right. Note also that the cosine has a maximum value of 1, and a minimum value of −1.
The graph never moves outside this range of values.
Another important point to note is that the sine and cosine curves have the same shape. The
cosine graph is the same as the sine except that it is displaced by 90◦ .
6. The tangent of any angle
Recall that tangent has already been defined as tan θ =
OPP
.
ADJ
y
1
P
θ
O
1
x
Figure 10. To find tan θ we need to use projections onto both axes.
c mathcentre February 12, 2004
6
In terms of projections this definition becomes:
tan θ =
projection of OP onto Oy
projection of OP onto Ox
An important result which follows immediately from comparing this definition with the earlier
ones for sine and cosine is that:
tan θ =
sin θ
cos θ
This gives us an identity which we need to learn and remember.
What does the graph of tangent look like? It’s a little bit trickier to draw, but can be done by
considering projections as outlined in Figure 11.
For example at point A, the projection onto Oy is zero, whilst the projection onto Ox is 1.
Hence at A, tan θ = 01 = 0 and the corresponding point is indicated on the graph.
At point B both projections are equal and so tan θ = 1.
At points near to C the projection onto Oy is approaching 1, whilst the projection onto Ox is
approaching zero. Hence the ratio
tan θ =
projection of OP onto Oy
projection of OP onto Ox
becomes very large indeed. We indicate this by the dotted line on the graph. This line, called
an asymptote, is approached by the graph as θ approaches 90◦ .
Continuing in this fashion we can produce the graph of tan θ for any angle θ, as shown in Figure
11.
C
y
C
P
B
θ
O
A
x
B
1
◦
-180 -90◦
A
90◦ 180◦
θ
Figure 11. The graph of tan θ can be found by considering projections
Note that the graph of tan θ repeats every 180◦ .
Exercise 1
Determine whether each of the following statements is true or false.
1. Sine is positive in the 1st and 4th quadrants.
7
c mathcentre February 12, 2004
2. The graph of cosine repeats itself every 180o
3. The graph of tangent repeats itself every 180o
4. Cosine is negative in the 2nd and 3rd quadrants
5. The graph of sine is continuous (i.e. has no breaks)
6. Tangent is negative in the 2nd and 4th quadrants
7. The graph of tangent is continuous (i.e. has no breaks)
Answers
Exercise 1
1. False 2. False 3. True 4. True 5. True 6. True 7. False
c mathcentre February 12, 2004
8