Download VS-VSKEU300/12PbF

VS-VSKEU300/12PbF
www.vishay.com
Vishay Semiconductors
HEXFRED® Ultrafast Diodes, 300 A
(INT-A-PAK Power Modules)
FEATURES
• Electrically isolated: DCB base plate
• Standard JEDEC® package
• Simplified mechanical designs, rapid assembly
• High surge capability
• Large creepage distances
• Case style INT-A-PAK
• Designed and qualified for industrial level
INT-A-PAK
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
PRODUCT SUMMARY
REMARKS
VR
1200 V
• Product reliability results valid for TJ = 150 °C
VF (typical) at 300 A at 25 °C
2.18 V
• Recommended operation temperature Top = 150 °C
trr (typical) at 45 A
233 ns
IF(DC) at TC
300 A at 60 °C
Package
INT-A-PAK
Circuit
Single diode
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Cathode to anode voltage
SYMBOL
VALUES
UNITS
1200
V
VR
Continuous forward current
IF
Single pulse forward current
IFSM
Maximum power dissipation
PD
RMS isolation voltage
TEST CONDITIONS
VISOL
TC = 25 °C
375
TC = 60 °C
300
TJ = 25 °C
2400
TC = 25 °C
1040
TC = 60 °C
750
50 Hz, circuit to base, all terminal shorted, t = 1 s
3500
A
W
V
Junction temperature range
TJ
-40 to +150
Storage temperature range
TStg
-40 to +150
°C
ELECTRICAL SPECIFICATIONS PER LEG (TJ = 25 °C unless otherwise specified)
PARAMETER
SYMBOL
Cathode to anode breakdown voltage
VBR
Maximum forward voltage
VFM
Maximum reverse leakage current
IRM
TEST CONDITIONS
MIN.
TYP.
MAX.
1200
-
-
IF = 300 A
-
2.18
2.23
IF = 300 A, TJ = 150 °C
-
2.24
2.47
VR = 1200 V
-
0.06
0.2
TJ = 150 °C, VR = 1200 V
-
-
20
IR = 500 μA
UNITS
V
mA
Revision: 02-Dec-15
Document Number: 94670
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-VSKEU300/12PbF
www.vishay.com
Vishay Semiconductors
DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified)
PARAMETER
SYMBOL
Diode reverse recovery charge
Qrr
Reverse recovery time
trr
Reverse recovery current
Irr
MIN.
TYP.
MAX.
TJ = 25 °C
TEST CONDITIONS
-
3.5
-
TJ = 125 °C
-
10.4
-
-
233
-
-
396
-
TJ = 25 °C
-
30
-
TJ = 125 °C
-
53
-
TJ = 25 °C
TJ = 125 °C
IF = 45 A
VR = 400 V
dIF/dt = 500 A/μs
UNITS
μC
ns
A
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
Maximum internal thermal resistance, 
junction to case per leg
RthJC
DC operation
0.12
Typical thermal resistance,
case to heatsink per module
RthCS
Mounting surface flat, smooth and greased
0.05
°C/W
A mounting compound is recommended and the
torque should be rechecked after a period of 3 hours
to allow for the spread of the compound.
to heatsink
Mounting torque ± 10 %
busbar
Approximate weight
4
Nm
6
200
g
7.1
oz.
Case style
New INT-A-PAK
100
1000
IRM Reverse current (mA)
IF - Instantaneous Forward Current (A)
UNITS
TJ = 150 °C
100
TJ = 125 °C
175 °C
10
150 °C
1
125 °C
0.1
25 °C
TJ = 25 °C
0.01
10
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
VFM - Forward Voltage Drop (V)
Fig. 1 - Typical Forward Voltage Drop Characteristics
200
400
600
800
1000
1200
VR - Reverse Voltage (V)
Fig. 2 - Typical Value of Reverse Current vs. Reverse Voltage
Revision: 02-Dec-15
Document Number: 94670
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-VSKEU300/12PbF
www.vishay.com
Vishay Semiconductors
Allowable Case Temperature (°C)
175
150
125
100
DC
75
Square wave (D = 0.50)
80 % rated VR applied
50
25
0
0
50
100
150
200
250
300
350
400
IF(AV) - Average Forward Current (A)
Fig. 3 - Maximum Allowable Case Temperature vs. Average Forward Current
ZthJC - Thermal Impedance
Junction to Case (°C/W)
1
0.1
0.01
0.50
0.20
0.10
0.05
0.02
0.01
DC
0.001
0.0001
0.00001
0.00001
0.0001
0.001
0.01
0.1
1
10
t1 - Rectangular Pulse Duration (s)
Fig. 4 - Maximum Thermal Impedance RthJC Characteristics
700
1600
RMS limit
600
1200
125 °C
1000
500
trr (ns)
Average Power Loss (W)
1400
800
600
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
DC
400
200
0
0
40
80 120 160 200 240 280 320 360 400
400
300
25 °C
200
100
200
300
400
500
IF(AV) - Average Forward Current (A)
dIF/dt (A/μs)
Fig. 5 - Forward Power Loss Characteristics
Fig. 6 - Typical Reverse Recovery Time vs. dIF/dt
Revision: 02-Dec-15
Document Number: 94670
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-VSKEU300/12PbF
www.vishay.com
Vishay Semiconductors
12300
55
50
10300
45
125 °C
40
125 °C
35
Irr (A)
Qrr (nC)
8300
6300
4300
30
25
25 °C
20
25 °C
15
2300
10
300
5
100
200
300
400
500
100
200
300
400
500
dIF/dt (A/μs)
dIF/dt (A/μs)
Fig. 7 - Typical Reverse Recovery Charge vs. dIF/dt
Fig. 8 - Typical Reverse Recovery Current vs. dIF/dt
ORDERING INFORMATION TABLE
Device code
VS-VS KE
1
2
U
300
3
4
/
12
PbF
5
6
1
-
Vishay Semiconductors product
2
-
KE = circuit configuration
3
-
U = ultrafast diode
4
-
Current rating 300 = 300 A
5
-
Voltage rating (12 = 1200 V)
6
-
PbF = lead (Pb)-free
CIRCUIT CONFIGURATION
1
3
Revision: 02-Dec-15
Document Number: 94670
4
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-VSKEU300/12PbF
www.vishay.com
Vishay Semiconductors
28 (1.10)
9 (0.33)
30 (1.18)
DIMENSIONS in (inches) millimeters INT-A-PAK DBC
Ø 6.5 (Ø 0.25)
80 (3.15)
7
6
5
4
14.5
46 (1.82)
(0.57)
35 (1.38)
17 (0.67)
1
2
66 (2.60)
3
37 (1.44)
2 screws M6 x 10
94 (3.70)
Revision: 02-Dec-15
Document Number: 94670
5
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
1
Document Number: 91000