Download KAGUYA 3D GIS user KAGUYA 3D GIS user`s manual - darts

Nov. 1, 2009
Japan Aerospace Exploration Agency (JAXA)
KAGUYA 3D GIS user’
user’s manual (for Windows)
KAGUYA 3D GIS
“KAGUYA 3D GIS” was developed based on the NASA World Wind (Java ver.) as the 3D viewer for KAGUYA
image contents. This application is written in Java programming language, and is able to be run on
multi-platform (Windows, MacOS, Linux Solaris etc.).
This manual guides the required preparation and the operating instruction of “KAGUYA 3D GIS” on Windows.
Contents
1.
Install of Java Runtime Environment
1.1.
Check of the install state of Java Runtime Environment
1.2.
Install of Java Runtime Environment
2.
Launch of “KAGUYA 3D GIS”
3.
Operation instruction of “KAGUYA 3D GIS”
4.
Deletion of application and data cache of “KAGUYA 3D GIS”
4.1.
Deletion of application
4.2.
Deletion of data cache
1
Nov. 1, 2009
Japan Aerospace Exploration Agency (JAXA)
１． Install of Java Runtime Environment
“Java Runtime Environment (JRE)” application (free) must be installed to operate “KAGUYA 3D GIS”. Please
check the version of JRE and install the latest one if necessary.
１．１ Check of the install state of Java Runtime Environment
Check the install state and version of Java Runtime Environment (JRE) of your PC according to following
procedure.
① Open “Control Panel” from “Start” button.
② Double Click “Java” icon and open “Java Control Panel”
If “Java” icon is not present in Control Panel, please proceed to “1.2 ②”, and install JRE.
③ Select “Java” tab, and click “viewer” button of “Java Application Runtime Setting”.
If the version of Java Runtime is the same as or newer than that described in ⑤, install is
unnecessary. Please proceed to “2. Launch of “KAGUYA 3D GIS”.
④ If the name of “Product” in “user” tab is older than “1.6.0_16” (latest version in Oct. 13, 2009),
please proceed to 1.2 ①, and install JRE of the latest version.
2
Nov. 1, 2009
Japan Aerospace Exploration Agency (JAXA)
１．２ Install of Java Runtime Environmen
① In case of older version of JRE was already installed.
If older version of JRE was already installed, please update to the latest version according to following
procedure.
i.
Open Java Control Panel by the procedure of 1.1 ①
ii.
Select “Update” tab, and click “Update now” button.
iii.
Click “download” button from the following window.
iv.
Following procedures are the same as those from following ② viii.
3
Nov. 1, 2009
Japan Aerospace Exploration Agency (JAXA)
② In case of newly install of JRE
i.
After connect your PC to internet, launch web browser (Internetexplorer, FireFox etc.)
ii.
Access to the following web site (JRE download site).
http://java.sun.com/javase/downloads/index.jsp
4
Nov. 1, 2009
Japan Aerospace Exploration Agency (JAXA)
iii.
Find item of “Java Runtime Environment (JRE)”, and click “download” button.
iv.
Select your OS type in platform selection page, then check in “Agreement” and click “Continue”.
5
Nov. 1, 2009
Japan Aerospace Exploration Agency (JAXA)
v.
Then, download page will open. Click the link “** Online Install” from “Available File” list. (e.g. “Windows
Online Install”)
vi.
Download
of
JRE
installer
will
be
automatically
download.
6
started.
Select
any
directory
to
Nov. 1, 2009
Japan Aerospace Exploration Agency (JAXA)
vii.
Double click downloaded installer icon.
viii.
Click “Install” button, and JRE install will be started. After the display of “Successfully installed”, click
“Close” button to finish install.
7
Nov. 1, 2009
Japan Aerospace Exploration Agency (JAXA)
ix.
After the install of JRE, access to the following web site to confirm the successful install of JRE. If you
can see the 3D movie in this web site, JRE was installed normally.
https://jogl-demos.dev.Java.net/applettest.html
8
Nov. 1, 2009
Japan Aerospace Exploration Agency (JAXA)
２． Launch of “KAGUYA 3D GIS”
GIS”
① After connect your PC to internet, launch web browser (Internetexplorer, FireFox etc.).
② Access to the “KAGUYA 3D GIS” web site.
http://wms.selene.jaxa.jp/3dmoon/index.html
③ Click the link “Kaguya_3D_Moon_Navi.jnlp”
9
Nov. 1, 2009
Japan Aerospace Exploration Agency (JAXA)
④ Download of “KAGUYA 3D GIS” will be automatically started.
⑤ After download, “Kaguya 3D GIS” application will be automatically launched.
10
Nov. 1, 2009
Japan Aerospace Exploration Agency (JAXA)
３． Operation instruction of “KAGUYA 3D GIS”
GIS”
① Mouse Operation
・
Zoom : Use the scroll wheel on the mouse or Left & Right mouse (both buttons) click & drag - up
and down
・
Pan : Left mouse button click & drag - all directions
・
Tilt: Right mouse button click & drag - up and down or use "Page Up" and "Page Down" on the
keyboard.
・
Rotate : Right mouse button click & drag - left and right
Note: Crossing the top and bottom half of the screen while rotating will change direction.
② Layer operation
・
Displayed layers can be selected by changing the check of “ON/OFF” in Layer menu (top left side of
the window).
・
Layer order cannot be changed.
③ “Link to Movies” contents operation
・
Information will pop up by putting mouse pointer on icons.
・
Link to movies by single click of icons.
11
Nov. 1, 2009
Japan Aerospace Exploration Agency (JAXA)
４． Deletion of application and data cache of “KAGUYA 3D GIS”
GIS”
４．１ Deletion of application
“KAGUYA 3D GIS” application is distributed with Java Web Start technology. This application is
independently managed as Java program in contrast to general executable format programs.
In rare case, the automatic update function of “KAGUYA 3D GIS” does not work, and the version of
application is not be updated to the newest version after download although it is already released in the web
site. In that case, you can download the newest version after delete the older one from your PC manually.
Procedure to delete the application is as follows.
① Check the location of “KAGUYA 3D GIS”
i.
Open the “Control Panel” from “Start” menu.
ii.
Double click “Java” icon in control panel to open.
12
Nov. 1, 2009
Japan Aerospace Exploration Agency (JAXA)
iii.
iv.
Click “View” button of “Temporary Internet Files” item of “General” tab.
“KAGUYA 3D GIS” of “Java cache viewer” is the application itself. Check download date and
other information.
13
Nov. 1, 2009
Japan Aerospace Exploration Agency (JAXA)
② Procedure to delete “KAGUYA 3D GIS” application.
i.
×” icon to delete.
Select “KAGUYA 3D GIS” from “Java cache viewer”, then click “×
14
Nov. 1, 2009
Japan Aerospace Exploration Agency (JAXA)
４．２ Deletion of data cache
Contents displayed on your PC by “KAGUYA 3D GIS” are downloaded from the server sequentially, and
used as “data cache”. (Therefore, initial start-up of this application takes some time.)
Because “KAGUYA 3D GIS” preferentially loads data cache in your PC, displayed contents data might be
older ones when the contents are updated on the server.
By deleting data cache in your PC, you can download the newest data from the server. The procedure is as
follows.
① Check the location of data cache
i.
Open “All user” directory in “My Computer”-“Local Disc (C:)”- “Documents and Settings”.
ii.
Select “Folder Option” from “Tool” menu.
iii.
Open “View” tab of “Folder Option” window, and check “Show hidden files and folders”, and click
“OK”.
15
Nov. 1, 2009
Japan Aerospace Exploration Agency (JAXA)
iv.
After confirmation that “Application Data” folder appeared in “All Users” folder as hidden folder,
Open “Application Data” folder, and open “WorldWindData”-“Moon”-“SELENE”.
v.
You can find the folders that include data cache of each layer.
16
Nov. 1, 2009
Japan Aerospace Exploration Agency (JAXA)
② Procedure to delete data cache.
i.
After display the folders includes data cache, delete folders you want by right-click option.
ii.
After this procedure, you can download the latest cache files from the server when you launch the
“KAGUYA 3D GIS”.
17