Download HMC565LC5 Datasheet

HMC565LC5
v03.0514
LOW NOISE AMPLIFIERS - SMT
GaAs SMT PHEMT LOW NOISE
AMPLIFIER, 6 - 20 GHz
Typical Applications
Features
The HMC565LC5 is ideal for use as a LNA or driver
amplifier for:
Noise Figure: 2.5 dB
• Point-to-Point Radios
OIP3: 20 dBm
• Point-to-Multi-Point Radios & VSAT
Single Supply: +3V @ 53 mA
• Test Equipment and Sensors
50 Ohm Matched Input/Output
• Military & Space
RoHS Compliant 5 x 5 mm Package
Functional Diagram
General Description
Gain: 21 dB
The HMC565LC5 is a high dynamic range GaAs
pHEMT MMIC Low Noise Amplifier housed in a
leadless RoHS compliant 5x5mm SMT package.
Operating from 6 to 20 GHz, the HMC565LC5
features 21 dB of small signal gain, 2.5 dB noise
figure and IP3 of +20 dBm across the operating
band. This self-biased LNA is ideal for microwave
radios due to its single +3V supply operation, and DC
blocked RF I/O’s.
Electrical Specifications, TA = +25° C, Vdd 1, 2, 3 = +3V
Parameter
Min.
Frequency Range
Gain
19
Gain Variation Over Temperature
Max.
Min.
Typ.
Max.
12 - 20
21
16
Units
GHz
18.5
dB
0.025
0.035
0.025
0.035
dB/ °C
Noise Figure
2.5
2.8
2.5
3
dB
Input Return Loss
15
12
Output Return Loss
13
15
dB
11
dBm
13
dBm
Output Power for 1 dB Compression (P1dB)
Saturated Output Power (Psat)
1
Typ.
6 - 12
8
10
9
11
Output Third Order Intercept (IP3)
20
Total Supply Current (Idd)(Vdd = +3V)
53
dB
21
75
53
dBm
75
mA
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or [email protected]
HMC565LC5
v03.0514
GaAs SMT PHEMT LOW NOISE
AMPLIFIER, 6 - 20 GHz
30
20
25
10
20
S21
S11
S22
0
15
-10
10
-20
5
-30
+25C
+85C
-40C
0
0
5
10
15
20
25
30
5
7
9
FREQUENCY (GHz)
Input Return Loss vs. Temperature
15
17
19
21
0
+25C
+85C
-40C
+25C
+85C
-40C
-5
RETURN LOSS (dB)
-5
RETURN LOSS (dB)
13
Output Return Loss vs. Temperature
0
-10
-15
-20
-10
-15
-20
-25
-25
5
7
9
11
13
15
17
19
21
5
7
9
FREQUENCY (GHz)
13
15
17
19
21
17
19
21
Output IP3 vs. Temperature
10
30
8
25
IP3 (dBm)
+25C
+85C
-40C
6
11
FREQUENCY (GHz)
Noise Figure vs. Temperature
NOISE FIGURE (dB)
11
FREQUENCY (GHz)
LOW NOISE AMPLIFIERS - SMT
Gain vs. Temperature
30
GAIN (dB)
RESPONSE (dB)
Broadband Gain & Return Loss
4
2
20
15
+25C
+85C
-40C
10
0
5
5
7
9
11
13
15
FREQUENCY (GHz)
17
19
21
5
7
9
11
13
15
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or [email protected]
2
HMC565LC5
v03.0514
GaAs SMT PHEMT LOW NOISE
AMPLIFIER, 6 - 20 GHz
20
16
16
Psat (dBm)
P1dB (dBm)
Psat vs. Temperature
20
12
8
+25C
+85C
-40C
4
12
8
+25C
+85C
-40C
4
0
0
5
7
9
11
13
15
17
19
21
5
7
9
11
FREQUENCY (GHz)
13
15
17
19
21
FREQUENCY (GHz)
Reverse Isolation vs. Temperature
Power Compression @ 12 GHz
25
Pout (dBm), GAIN (dB), PAE(%)
0
-10
ISOLATION (dB)
LOW NOISE AMPLIFIERS - SMT
P1dB vs. Temperature
+25C
+85C
-40C
-20
-30
-40
-50
-60
5
7
9
11
13
15
17
19
20
Pout
Gain
PAE
15
10
5
0
-5
-20
21
-15
FREQUENCY (GHz)
-10
-5
INPUT POWER (dBm)
Gain, Noise Figure & Power vs.
Supply Voltage @ 12 GHz
10
25
20
8
Gain
7
P1dB
15
6
5
4
10
3
5
Noise Figure
2
NOISE FIGURE (dB)
GAIN (dB), P1dB (dBm)
9
1
0
0
2.5
3
3.5
Vdd (Vdc)
3
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or [email protected]
HMC565LC5
v03.0514
GaAs SMT PHEMT LOW NOISE
AMPLIFIER, 6 - 20 GHz
Drain Bias Voltage (Vdd1, Vdd2, Vdd3)
+3.5 Vdc
RF Input Power (RFIN)(Vdd = +3.0 Vdc)
0 dBm
Channel Temperature
175 °C
Continuous Pdiss (T= 85 °C)
(derate 8.5 mW/°C above 85 °C)
0.753 W
Thermal Resistance
(channel to ground paddle)
119.5 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
Typical Supply Current vs. Vdd
Vdd (V)
Idd (mA)
+2.5
51
+3.0
53
+3.5
56
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
LOW NOISE AMPLIFIERS - SMT
Absolute Maximum Ratings
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES
GOLD OVER 50 MICROINCHES MINIMUM NICKEL
3. DIMENSIONS ARE IN INCHES [MILLIMETERS]
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND
Package Information
Part Number
Package Body Material
Lead Finish
HMC565LC5
Alumina, White
Gold over Nickel
MSL Rating
MSL3
[1]
Package Marking [2]
H565
XXXX
[1] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or [email protected]
4
HMC565LC5
v03.0514
GaAs SMT PHEMT LOW NOISE
AMPLIFIER, 6 - 20 GHz
LOW NOISE AMPLIFIERS - SMT
Pin Descriptions
5
Pin Number
Function
Description
1, 2, 6 - 19,
23 - 25, 27,
29, 31, 32
N/C
This pin may be connected to RF/DC ground.
Performance will not be affected.
3, 5, 20, 22
GND
These pins and package bottom must be
connected to RF/DC ground.
4
RFIN
This pin is AC coupled
and matched to 50 Ohms.
21
RFOUT
This pin is AC coupled
and matched to 50 Ohms.
30, 28, 26
Vdd1, 2, 3
Power Supply Voltage for the amplifier. External bypass
capacitors of 100 pF and 2.2 µF are required.
Interface Schematic
Application Circuit
Component
Value
C1, C2, C3
100 pF
C4, C5, C6
2.2 µF
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or [email protected]
HMC565LC5
v03.0514
GaAs SMT PHEMT LOW NOISE
AMPLIFIER, 6 - 20 GHz
LOW NOISE AMPLIFIERS - SMT
Evaluation PCB
List of Materials for Evaluation PCB 110431
Item
Description
J1 - J2
PCB Mount K Connector
J3
2 mm DC Header
C1 - C3
100 pF Capacitor, 0402 Pkg.
C4 - C6
2.2 µF Capacitor, Tantalum
U1
HMC565LC5 Amplifier
PCB [2]
109001 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
[1]
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or [email protected]
6
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Analog Devices Inc.:
HMC565LC5 HMC565LC5TR