Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
EMIN Vietnam Joint Stock Company Office in Ha Noi City: Add : No 8A, Hoang Cau Street, Dong Da Distric, Ha Noi, Vietnam Tel : (024) 35.381.269 - ( 024) 35.381.271 Fax : (024) 35 190 360 ; Email: [email protected] Office in Ho Chi Minh City: Add : No 218 Cong Hoa Street, Ward 12, Tan Binh District, Ho Chi Minh City Tel : (028) 3811 96 36 - (028) 3811 93 59 Fax : (028) 3811 95 45 ; Email: [email protected] Offices in Da Nang City: Address: No 112A Le Dinh Ly Street, Vinh Trung Ward, Thanh Khe District, Da Nang City, Vietnam Tel: (84-236) 374 77 11 - (84-236) 374 77 22 Fax: (84-236) 374 77 44 ; Email: [email protected] QUOTATION RF Signal Generators 13/08/2017 To: Company: Address: Email: Tel: Fax Thank you very much for your requirement and we would like to offer you the price as under: Commodity Description Manucturer: Tektronix Price 331.650.000 VND Model: TSG4106A (M01) Tektronix TSG4106A RF Vector Signal Generators (6Ghz) Manucturer: Tektronix Model: TSG4104A (M01) Tektronix TSG4104A RF Vector Signal Generators (4Ghz) 226.710.000 VND Manucturer: Tektronix 174.240.000 VND Model: TSG4102A ( M01) Tektronix TSG4102A RF Vector Signal Generators (2Ghz) Model: DSG3030 Manufacturer: Rigol Warranty: 12 months Rigol DSG3030 3GHz RF Signal Generator (9 kHz ~ 3 GHz) Frequency range 9 kHz to 3 GHz Frequency resolution 0.01 Hz Setting time[1] < 10 ms (typ.) Frequency Band[2] Band Frequency N 1 f ≤ 23.4375MHz 1 2 23.4375MHz < f ≤46.875MHz 0.03125 3 46.875MHz < f ≤ 93.75MHz 0.0625 4 93.75MHz < f ≤ 187.5MHz 0.125 5 187.5MHz < f ≤ 375MHz 0.25 6 375MHz < f ≤ 750MHz 0.5 7 750MHz < f ≤ 1500MHz 1 8 1500MHz < f ≤ 3000MHz 2 9 3000MHz < f ≤ 6000MHz 4 Internal Reference Frequency Reference frequency 10MHz Temperature stability In temperature range 0℃ to 50℃ , reference to 25℃ < 0.5ppm With OCXO-A08 option < 5ppb Aging rate < 1ppm/year With OCXO-A08 option < 30ppb/year Output for internal reference frequency Frequency 10MHz Level +8dBm (typ.) Output impedance 50Ω (nom.) Input for external reference frequency Frequency 10MHz Level 0dBm to +10dBm Maximum deviation ±5ppm Input impedance 50Ω (nom.) Internal Modulation Generator (LF) Waveform Sine, square, triangle, ramp, sine sweep Frequency range Sine, sine sweep 0.1Hz to 1MHz Square 0.1Hz to 20kHz Triangle, ramp 0.1Hz to 100kHz Resolution 0.01Hz 1.834.602.000 VND Frequency error Same as RF reference source Output voltage[1] Setting range Resolution 1mV Output impedance 50Ω (nom.) Sine sweep Sweep mode Single, continuous Sweep range Frequency range of LF output Sweep time 1ms to 1000s Sweep shape Triangle, ramp Triggering Auto, trigger key, external, bus (GPIB, USB, LAN) Power Supply Input voltage range, AC 100 V to 240 V (nom.) AC frequency range 45 Hz to 440 Hz Power consumption With all the options 50 W (typ.), max. 60 W Dimensions (W × H × D) 364 mm × 112 mm × 420 mm Weight 6.4 Kg Model: DSG3060 Manufacturer: Rigol Warranty: 12 months Rigol DSG3060 6GHz RF Signal Generator (9 kHz ~ 6 GHz) Frequency range 9 kHz to 6 GHz Frequency resolution 0.01 Hz Setting time[1] < 10 ms (typ.) Frequency Band[2] Band Frequency N 1 f ≤ 23.4375MHz 1 2 23.4375MHz < f ≤46.875MHz 0.03125 3 46.875MHz < f ≤ 93.75MHz 0.0625 4 93.75MHz < f ≤ 187.5MHz 0.125 5 187.5MHz < f ≤ 375MHz 0.25 6 375MHz < f ≤ 750MHz 0.5 7 750MHz < f ≤ 1500MHz 1 8 1500MHz < f ≤ 3000MHz 2 9 3000MHz < f ≤ 6000MHz 4 Internal Reference Frequency Reference frequency 10MHz Temperature stability In temperature range 0℃ to 50℃ , reference to 25℃ < 0.5ppm With OCXO-A08 option < 5ppb Aging rate < 1ppm/year With OCXO-A08 option < 30ppb/year Output for internal reference Frequency 10MHz Level +8dBm (typ.) Output impedance 50Ω (nom.) Input for external reference frequency Frequency 10MHz Level 0dBm to +10dBm Maximum deviation ±5ppm Input impedance 50Ω (nom.) 250.976.000 VND Internal Modulation Generator (LF) Waveform Sine, square, triangle, ramp, sine sweep Frequency range Sine, sine sweep 0.1Hz to 1MHz Square 0.1Hz to 20kHz Triangle, ramp 0.1Hz to 100kHz Resolution 0.01Hz Frequency error Same as RF reference source Output voltage[1] Setting range Resolution 1mV Output impedance 50Ω (nom.) Sine sweep Sweep mode Single, continuous Sweep range Frequency range of LF output Sweep time 1ms to 1000s Sweep shape Triangle, ramp Triggering Auto, trigger key, external, bus (GPIB, USB, LAN) Power Supply Input voltage range, AC 100 V to 240 V (nom.) AC frequency range 45 Hz to 440 Hz Power consumption With all the options 50 W (typ.), max. 60 W Dimensions (W × H × D) 364 mm × 112 mm × 420 mm Weight 6.4 Kg Model: DSG830 Manufacturer: Rigol Warranty: 12 months Rigol DSG830 3GHz RF Signal Generator (9 kHz ~ 3 GHz) DSG830 Frequency range 9 kHz to 3 GHz Frequency resolution 0.01 Hz Setting time[1] < 10 ms (typ.) Frequency Band Band Frequency range N[2] 1 f < 227.5 MHz 0.25 2 227.5 MHz ≤ f < 455 MHz 0.125 3 455 MHz ≤ f < 910 MHz 0.25 4 910 MHz ≤ f < 1820 MHz 0.5 5 1820 MHz ≤ f ≤ 3000 MHz 1 Internal Reference Frequency Reference frequency 10 MHz Temperature stability In temperature range 0℃ to 50℃ , reference to 25℃ < 2 ppm With option OCXO-B08 < 5 ppb Aging rate < 1 ppm/year With option OCXO-B08 < 30 ppb/year Internal reference frequency output Frequency 10 MHz Level +5 dBm to +10 dBm External reference frequency input Frequency 10 MHz 91.454.000 VND Level 0 dBm to +10 dBm Maximum deviation ±5 ppm Internal Modulation Generator (LF) Waveform Sine, square Frequency range Sine DC to 200 kHz Square DC to 20 kHz Resolution 0.01 Hz Frequency error The same with that of the RF reference source Voltage range AC 0 to 3 Vp DC -3 V to 3 V Voltage resolution 2 mV Power Supply Input voltage range, AC 100 V to 240 V (nom.) AC frequency range 45 Hz to 440 Hz Power consumption With all the options 50 W (typ.), max. 60 W Dimensions (W × H × D) 261.5 mm × 112 mm × 318.4 mm (10.30 inch × 4.41 inch × 12.54 inch) Weight 4.2 kg (9.3 Ib) Model: DSG815 Manufacturer: Rigol Warranty: 12 months Rigol DSG815 1.5GHz RF Signal Generator (9 kHz ~ 1.5 GHz) DSG815 Frequency range 9 kHz to 1.5 GHz Frequency resolution 0.01 Hz Setting time[1] < 10 ms (typ.) Frequency Band Band Frequency range N[2] 1 f < 227.5 MHz 0.25 2 227.5 MHz ≤ f < 455 MHz 0.125 3 455 MHz ≤ f < 910 MHz 0.25 4 910 MHz ≤ f < 1820 MHz 0.5 5 1820 MHz ≤ f ≤ 3000 MHz 1 Internal Reference Frequency Reference frequency 10 MHz Temperature stability In temperature range 0℃ to 50℃ , reference to 25℃ < 2 ppm With option OCXO-B08 < 5 ppb Aging rate < 1 ppm/year With option OCXO-B08 < 30 ppb/year Internal reference frequency output Frequency 10 MHz Level +5 dBm to +10 dBm External reference frequency input Frequency 10 MHz Level 0 dBm to +10 dBm Maximum deviation ±5 ppm Internal Modulation Generator (LF) 50.798.000 VND Waveform Sine, square Frequency range Sine DC to 200 kHz Square DC to 20 kHz Resolution 0.01 Hz Frequency error The same with that of the RF reference source Voltage range AC 0 to 3 Vp DC -3 V to 3 V Voltage resolution 2 mV Power Supply Input voltage range, AC 100 V to 240 V (nom.) AC frequency range 45 Hz to 440 Hz Power consumption With all the options 50 W (typ.), max. 60 W Dimensions (W × H × D) 261.5 mm × 112 mm × 318.4 mm (10.30 inch × 4.41 inch × 12.54 inch) Weight 4.2 kg (9.3 Ib) Manufacturer: GW Intek Model: USG-LF44 10.890.000 VND Manufacturer: GW Intek Model: USG-0103 9.900.000 VND Manufacturer: GW Intek Model: USG-0818 9.900.000 VND Manufacturer: GW Intek Model: USG-0818 9.900.000 VND GW Intek USG-LF44 RF Signal Generators GW Intek USG-0103 RF Signal Generators GW Intek USG-0818 RF Signal Generators GW Intek USG-2030 RF Signal Generators 9.900.000 VND Manufacturer: GW Intek Model: USG-3044 GW Intek USG-3044 RF Signal Generators Manufaturer: BK Precision - USA Model: 2005B - Frequency Range: + 100 kHz to 150 MHz (up to 450 MHz on third harmonics) + A) 100 kHz-300 kHz BK Precision 2005B RF Signal Generator (450MHz) + B) 300 kHz-1 MHz + C) 1 MHz-3.2 MHz + D) 3 MHz-10 MHz + E) 10 MHz-35 MHz + F) 32 MHz-150MHz + (96-450 MHz on harmonics) - Dial Accuracy : ±3% RF Output Level: Continuously variable. Step attenuator provides approximately 20 dB of attenuation MODULATION: AM Power: 120/220/240V VAC Dimensions: 150 x 250 x 130 mm Weight: 2.5 kg SUPPLIED: BNC to Insulated Clip Output Cable, Detachable Power Cord, Instruction Manual Model: TGR6000 Manufacturer: TTI Warranty: 12 months TTI TGR6000 6GHz RF signal generator - CW with sweep (10MHz ~ 6000MHz) Frequency Setting Frequency Range: 10MHz to 6000MHz Setting Resolution: 10Hz Accuracy/Stability: See Reference Frequency section. Phase Noise 500MHz Carrier: <-110dBc/Hz (typ) @ 20kHz offset <-120dBc/Hz (typ) @ 100kHz offset 3GHz Carrier: <-95dBc/Hz (typ) @ 20kHz offset <-110dBc/Hz (typ) @ 100kHz offset 6GHz Carrier: <-89dBc/Hz (typ) @ 20kHz offset <-104dBc/Hz (typ) @ 100kHz offset Residual FM Residual FM: 12 Hz @ 500MHz Equivalent peak deviation in a 300Hz to 3.4kHz bandwidth. Switching Speed Settling Time: <8ms to settle within 100Hz or 0.1ppm of final frequency, if greater. FREQUENCY REFERENCE Internal Reference Reference Accuracy: <± 1ppm, 15ºC to 30ºC <± 2ppm, 5ºC to 40ºC Reference Stability: <1ppm/year 10MHz Reference In/Out Rear panel BNC that can be disabled when not 6.578.000 VND 0 VND required for input or output. Ext. Reference In: 10MHz, 50W input impedance, 2 to 5Vpp Automatic detection and selection when external reference signal is present and Reference IN is selected from front panel. Front panel indicator shows when External Reference is active. Int. Reference Out: 10MHz, 50W output impedance, >2Vpp into 50W Signal present when Reference OUT is selected from front panel. OUTPUT LEVEL Level Setting Level Range: –110dBm to +7dBm Setting Parameters: dBm, dBµV or µV/mV Setting Resolution: 0.1dB, 0.01uV to 1mV Setting Accuracy: ± 2dBm Signal Purity Harmonically Related: <-25dBc @ +7dBm, <30dBc@levels <=0dBm 30 to 6000MHz <-25dBc@levels <=0dBm 10 to 30MHz Sub-harmonic: <3000MHz : None. >3000MHz :<– 40dBc (typ) @ +7dBm Non-harmonic Spurii: <–50dBc >10kHz offset 10 to 3000MHz (Note 1) <-44dBc >10kHz offset 3000MHz to 6000MHz (Note 2) Note 1 - <-45dBc >10kHz offset 1900–2150MHz Note 2 - <-39dBc >10kHz offset 3800–4300MHz. Output Connection Output Impedance: 50W Output Connector: Type N Reverse Protection: 50V DC Output Switch: RF OUT On/Off switch with indication of ON status FREQUENCY and AMPLITUDE SWEEP Step Sweep Step frequency and/or amplitude according to a formula over a specified number of points. Max Points: 1000 Formula Specifies: Frequency start/stop. Amplitude start/stop. Dwell time at each step – programmable 0.01 to 10.000sec Sweep Run: Continuous or single. Sweep up or down Step Spacing: Linear or logarithmic Sweep Triggering: Manual, Ext. signal, timed (0.1 – 999.9sec) or via remote interface. Sync Signal: (Output Stable) available during dwell time. Programmable to be high or low List Sweep As for Step Sweep except that a user defined table of frequency, amplitude and dwell time values defines the steps. The table can be created within the instrument or downloaded via the remote interfaces. Max Points: 1000 List Storage: Up to 16 Sweep Lists can be stored permanently within the instrument Point Trigger Each point in a sweep (step or list) can be subject to a trigger event rather than a dwell time. Point Triggering: Manual, Ext. signal or via remote interface. DIGITAL INTERFACES Full digital remote control facilities are available through the RS232, USB, LAN and GPIB interfaces. RS-232 9-pin D connector. Variable Baud rate can be set between 1200 and 115200 Baud maximum. USB USB 2.0 connection (backwards compatible with USB 1.x). Operates as a virtual COM port. GPIB (IEEE-488) The interface conforms with IEEE-488.1 and IEEE488.2. Ethernet (LAN) Standard 10/100 base-T hardware connection. ICMP and TCP/IP Protocol for connection to Local Area Network or direct connection to a single PC. Model: TG5011G Manufacturer: TTI Warranty: 12 months TTI TG5011G programmable DDS function generator (50Mhz, USB/LAN/GPIB) STANDARD WAVEFORMS SINE Note that purity specifications above 25MHz apply only to the TG5011. Frequency Range: 1µHz to 50MHz (TG2511 - 1µHz to 25MHz) Frequency Resolution: 1µHz, 14 digits Output Level: 10mVp-p to 10Vp-p into 50 W Amplitude Flatness Relative to 1kHz: <100kHz 0.1dB, <5MHz 0.15dB, <25MHz 0.3dB, <50MHz 0.5dB Harmonic Distortion: <1 Vp-p > 1Vp-p DC to 20kHz -65dBc -65dBc 20kHz to 100kHz -60dBc -60dBc 100kHz to 1MHz -45dBc -45dBc 1MHz to 25MHz -40dBc -35dBc 25MHz to 50MHz -40dBc -28dBc Non-Harmonic Spurii: <–60dBc to 1MHz, <–60dBc 0 VND + 6dB/octave 1MHz to 50MHz Phase Noise: -115dBc/Hz, typical (10kHz offset) SQUARE Frequency Range: 1µHz to 50MHz (TG2511 - 1µHz to 25MHz) Resolution: 1µHz, 14 digits Output Level: 10mVp-p to 10Vp-p into 50 W Rise and Fall Times: <8ns (TG2511 - <13ns) Overshoot: <5% Variable Duty Cycle: 20% to 80% to 10MHz, 0.1% resolution, 40% to 60% to 25 MHz, 0.1% resolution, 50% (fixed) above 25MHz Asymmetry: 1% of period + 5ns (@ 50% duty) Jitter (RMS): 0.5ns + 100 ppm of period RAMP & TRIANGLE Frequency Range: 1µHz to 500kHz (TG2511 1µHz to 250kHz) Resolution: 1µHz, 12 digits Output Level: 10mVp-p to 10Vp-p into 50 W Linearity Error: <0.1% to 30 kHz Variable Symmetry: 0.0 % to 100.0 %, 0.1% resolution. Single key operation of 50% (Triangle) Note the triangle and sawtooth waveforms are also available from the arbitrary waveform menu enabling repetition rates of up to 10MHz/6MHz. Waveform quality will deteriorate at higher frequencies however. PULSE Frequency Range: 500 µHz to 12.5MHz (TG2511 500 µHz to 6.25MHz) Resolution: 1µHz , 14 digits Output Level: 10mVp-p to 10Vp-p into 50 W Overshoot: <5% Jitter: 300ps + 0.01% of period Rise/Fall Times: Rise and Fall times can be independently varied or can be varied together simultaneously. Edge Range: <8ns to 40µs (TG2511 - <13ns to 40µs) Edge Resolution: 0.1ns for rise/fall time ≤100ns; 1ns for rise/fall >100ns and ≤2µs; 10ns for rise/fall >2µs and ≤40µs Width Range: 20ns to 2000s (20ns minimum for period ≤40s; 200 ns minimum for period >40s and ≤400s; 2µs minimum for period >400s) Width Resolution: 10ns for period ≤40s; 100ns for period >40s and ≤400s; 1µs for period >400s Delay Range: 0ns to 2000s Delay Resolution: 10ns for period ≤40s; 100ns for period >40s and ≤400s; 1µs for period >400s ARBITRARY WAVEFORMS In-built Arbitrary Waveforms Sinc, Exponential Rise, Logarithmic Rise, DC, Positive and Negative Ramps and Square waveforms are built-in and always present. Additional waveforms are supplied on disc (Cardiac, Gaussian, Exponential Fall, Logarithmic Fall). User defined Arbitrary Waveforms Up to 4 additional or user defined waveforms may be stored in non-volatile memory. Waveforms can be defined by downloading of waveform data via USB memory stick, remote interfaces, or editing via the instrument’s front panel. Waveform Size: 2 points to 131072 points (128k). Memory Size: Up to 4 waveforms of up to 64k points, or 2 waveforms of up to 128k points, (or 2 of 64k points plus 1 of 128k points). External Storage: Up to 1,000 waveforms per USB memory stick. Vertical Resolution: 14 bits Frequency Range: 1µHz to 10MHz (TG2511 - 1µHz to 6MHz) Resolution: 1µHz , 14 digits Output Level: 10mVp-p to 10Vpp into 50 W Sampling rate: 125MS/s Output Filter: Selects between 50MHz Elliptic or 20MHz Bessel filter depending on the waveform. Arbitrary Waveform Creation and Editing Waveform creation and editing is provided within the generator including point insertion, line drawing and interpolation. WAVEFORM MANAGER PLUS Both generators are supplied with Waveform Manager Plus. This Windows* based software provides a sophisticated tool set for the creation, editing and management of arbitrary waveforms. The waveforms can be transferred to the generator either using a USB memory stick, or by the digital interfaces. Model: TGR1040 Manufacturer: TTI Warranty: 12 months TGR1040 - FREQUENCY Frequency Range: 10MHz to 1000MHz TTI TGR1040 synthesised Setting Resolution: 1kHz by direct keyboard entry, RF signal generators (10MHz or in user-set increments ~ 1000MHz) of 1kHz to 999·999MHz. Display Resolution: 1kHz 0 VND Accuracy: < ± 1 ppm over temperature range 15°C to 30°C < ± 2 ppm over temperature range 5°C to 40°C. Stability: < ± 1ppm/year ageing. Phase Noise: -110dBc/Hz at 25kHz offset, 500MHz carrier. Residual FM: (FM Off) Equivalent peak deviation in a 300Hz to 3·4kHz bandwidth: 17Hz at 500MHz carrier. Output Level Range: –127dBm to +7dBm (0·1µV to 500mV into 50). Setting Resolution: 0·1dB (or 0·01µV to 1mV) by direct keyboard entry, or in user-set increments of 0·1dB to 100dB (or 0·01µV to 100mV). Accuracy: Better than ± 2dBm, except for output levels <-70dBm at 500 -1000 MHz, ± 3dBm. Harmonics: Typically <-25dBc, maximum –20dBc, any carrier frequency, output level <0dBm. Non-Harmonic Spurii: <–60dBc at >8kHz offset. Carrier Leakage: <0.5uV generated into a 50 load by a 2 turn 25mm loop, at a distance of 25mm from the generator with the output set to <-10dBm into a 50 sealed load. Output Type: Output impedance 50, Type N connector, Reverse protection 50V DC. Output Switch: RF OUT on-off switch with LED showing ON status. TG General Display: 20 character x 4 row backlit alphanumeric LCD Data Entry: Keyboard selection of frequency, amplitude, etc.; value entry direct by numeric keys or by rotary control. Stored Settings: Up to 9 complete instrument set-ups may be stored and recalled from battery-backed memory. Mechanical Size: 130mm (3U) H; 212mm (half-rack) W; 330mm D. Weight: 4·6 kg. (10 lb) Power Requirements 100V or 110V - 120V or 220V - 240V, all ±10% 50/60Hz, adjustable internally; 30VA max. Installation Category II. Temperature & Environmental Operating Range: +5°C to 40°C, 20-80% RH. Storage Range: –20°C to + 60°C. Environmental: Indoor use at altitudes up to 2000m, Pollution Degree 2. Safety & EMC Safety: Complies with EN61010-1. EMC: Complies with EN61326. Model: TGR2050 Manufacturer: TTI Warranty: 12 months TGR2050 - FREQUENCY Frequency Range: 150kHz to 2000MHz TTI TGR2050 synthesised Setting Resolution: 10Hz by direct keyboard entry, RF signal generators (150kHz or in user-set increments ~ 2000MHz) of 10Hz to 999·99999MHz. Display Resolution: 10Hz. Frequency Accuracy: See Frequency Reference specifications. Phase Noise: -116dBc/Hz at 25kHz offset, 500MHz carrier. Residual FM: (FM Off) Equivalent peak deviation in a 300Hz to 3·4kHz bandwidth: 12Hz at 500MHz carrier. TGR2050 - REFERENCE FREQUENCY Options: Internal or External (via rear panel BNC). Internal Accuracy: < ± 1 ppm over temperature range 15°C to 30°C (< ± 2 ppm over temperature range 5°C to 40°C). Internal Stability: < ± 1 ppm per year. Internal Ref. Out: 10MHz from 50, amplitude 2V pk-pk into 50. External Ref In: 10MHz into 50, amplitude 2V pkpk to 5V pk-pk. Modulation Source Type: Internal from built-in sine wave generator, or external from front panel BNC. Internal: 400Hz or 1kHz sine, signal also available as an output. External: Calibrated for 1V rms sine, input impedance 600. Frequency Modulation Max Peak Deviation: See Table. Setting Resolution: 0.5 kHz. Deviation Accuracy: <±10% ±0.5kHz for 1kHz Internal or 1kHz / 1Vrms External Modulation. External Modulation: 100Hz - 300kHz (±2dB relative to 1kHz). Distortion: < 2% @ 1kHz modulation, max. deviation 0 VND (300-3.4kHz bandwidth). Phase Modulation Max Peak Deviation: See Table. Setting Resolution: 0.05 rads for <10.0rads deviation, 0.1 rads for >10.0rads deviation. Deviation Accuracy: <±10% ±0.05rads for 1kHz Internal or 1kHz / 1Vrms External Modulation. External Modulation: 100Hz - 10kHz (±2dB relative to 1kHz). Distortion: < 2% @ 1kHz modulation, Mechanical Size: 130mm (3U) H; 212mm (half-rack) W; 330mm D. Weight: 4·6 kg. (10 lb) Power Requirements 100V or 110V - 120V or 220V - 240V, all ±10% 50/60Hz, adjustable internally; 30VA max. Installation Category II. Temperature & Environmental Operating Range: +5°C to 40°C, 20-80% RH. Storage Range: –20°C to + 60°C. Environmental: Indoor use at altitudes up to 2000m, Pollution Degree 2. Safety & EMC Safety: Complies with EN61010-1. EMC: Complies with EN61326. Reamrk: - The above-mentioned price Excluded VAT invoice. - The picture is not completely the same as real product Delivery: - Inside Hanoi downtown after 2 to 6 hours in working time for product available in stock, except for products need to be made - Products for provincial delivery depend on the delivery time from nearest wearhouse to delivery place. Payment mode: * In cash or bank remittance after receiving goods Further information EMIN Vietnam Joint Stock Company Office in Ha Noi City: Add : No 8A, Hoang Cau Street, Dong Da Distric, Ha Noi, Vietnam Tel : (024) 35.381.269 - ( 024) 35.381.271 Fax : (024) 35 190 360 ; Email: [email protected] Office in Ho Chi Minh City: Add : No 218 Cong Hoa Street, Ward 12, Tan Binh District, Ho Chi Minh City Tel : (028) 3811 96 36 - (028) 3811 93 59 Fax : (028) 3811 95 45 ; Email: [email protected] Offices in Da Nang City: Address: No 112A Le Dinh Ly Street, Vinh Trung Ward, Thanh Khe District, Da Nang City, Vietnam Tel: (84-236) 374 77 11 - (84-236) 374 77 22 Fax: (84-236) 374 77 44 ; Email: [email protected]