Download Factor 1 (모든 금속에 대한 동일한 감지거리)

Technical Features
Highest switching distance(가장 긴 센싱거리 자랑)
• Because of the novel patented coil technology,
sensors feature a switching distance that is up to 250% higher than
that of conventional inductive sensors with ferrite core.
2
Type
Sn max [mm]
M12
4b
10 nb
M18
8b
15 nb
M30
15 b
30 nb
CK/CP40 30 b
50 nb
Q80
70 nb
50 b
Factor 1 (모든 금속에 대한 동일한 감지거리)
• The innovative
sensors have set a new benchmark in
metal detection. They are capable of detecting materials such as iron,
stainless steel, copper, aluminium and brass at the same high
distance with the highest precision.
3
Recessed mounting(완벽한 매립 마운팅 가능)
• Flush sensors are fully embeddable in contrast to "semi-flush" sensor
types.
• For additional mechanical protection, they allow recessed mounting
of half a turn of the thread - for absolute safety under all mounting
conditions.
4
Partial embedding
Flexibility through integrated
pre-damping protection:
• Very small metal-free zones
• Rectangular styles allow 4-side
embedding in metal
• Threaded barrel types allow
embedding up to the upper edge
of the threaded barrel
• Pre-damping is automatically
compensated via the
self-compensation function!
5
Magnetic field immunity
•
sensors do not incorporate a ferrite core and are thus
not affected by strong magnetic fields, which occur, for instance,
during electrical welding processes or near lifts and electrical
furnaces.
6
A high level of EMC
• All
sensors not
only fulfil the present standard
EN 50082-2, but also exceed
the strict provisions of the EN61000-4-6, which
will become integral part of the proximity switch
standard from 2006 on.
7
A high degree of protection IP68 and IP69K
• Due to the advanced housing and encapsulation technology, all
sensors pass IP68 testing according to the strict
TURCK company standard.
• They thus also offer optimum protection in harsh environments.
IP68 including IP67:
• 24 hrs. continuous storage at +70 °C
• 24 hrs. continuous storage at - 25 °C
• 7 days submersion at a depth of 1 m
• 10 temperature shock cycles from
+70 °C to -25 °C
• Dwell cycle per temperature: 1 hour
IP69K:
Suited for high pressure steam jet cleaning to DIN
40050-9 following EN 60529
8
Sensor sealing(수분에 강력한 Sealing 마감처리)
• A special double-lip seal of the individual housing components in the
front cap area and at the connector insert prevent the ingress of
liquids even during high pressure cleaning procedures. As a result,
the
sensors even exceed the requirements of
protection degree IP68 and IP69K by far.
9
Resistance
• The materials of the WD series used for the threaded barrel (V4A;
1.4404; 316L) and the front cap (LCP Vectra 130) are resistant to all
common acid and alkaline detergents and disinfectants.
Consequently, damages through aggressive cleansers are avoided.
10
한국타이어 제안 센서 - 가류기
emitter coils
receiver coils
magnetic field
 내부의 기존 구리 코일방식이 아닌 PCB방식의 센서
 Factor 1 sensor – 전금속 감지 센서
 완벽한 매립가능.(공간 유용성 좋음)
 내부 Sealing 처리로 인한 수분 및 습기가 침투하지 못함.
 기존 센서 보다 높은 온도 저항성
11