Download IEEE Communications-2017 - Levine Lectronics and Lectric

Advances in Communications &
Reliability of Power and Control
Systems
Presented by
John S. Levine, P.E.
Levine Lectronics and Lectric, Inc.
770 565-1556
[email protected]
1
Are you frustrated?
• Ever had problems getting on the network?
• Ever had problems getting on the web?
• How can a person with an Apple Computer
send you an email when you use Microsoft
Outlook?
• Why can’t I talk to these relays?
2
• All these questions will hopefully be answered
and more because:
This is all part of Communications!
3
Overview of Topics to be covered
• Basics
• Ethernet
• Protocols
• HMI
4
Basics
•
•
•
•
•
•
•
Introduction
Parallel
Serial
Parity Error
Network
Standards
OSI Model
5
Introduction
6
Formatting
Word – Could be 16,32, or 64 bits
Group
Address
Description
Current
0300
0301
0302
030D
030E
030F
Phase A Current
Phase B Current
Phase C Current
Phase A Differential
Phase B Differential
Phase C Differential
7
Parallel
8
Serial
Baud Rate – A measure of how fast serial data is moving
between devices per second. 2 common levels are 19, 200
BPS and 9,600 BPS and now 115,200 BPS
9
Serial Communications
• Physical Layer
– RS 232
– RS 485
– USB
10
RS 232
Slew Rate – Speed we can go from -25 V to 25 V,
limits baud rate DTE Data Terminal Equipment DCE Data Communication Equipment
11
RS 485
conductors are electrically floating
12
Universal Serial Bus (USB) Port
• Up to 127 devices can connect to the host,
either directly or by way of USB hubs.
• Individual USB cables can run as long as 5
meters; with hubs, devices can be up to 30
meters away from the host.
• With USB 2.,the bus has a maximum data
rate of 480 Mb per second.
• With USB 3.,the bus has a maximum data
rate of 4.80 Gb per second. (Plan to go to
10 GB)
• A USB cable has two wires for power (+5
volts and ground) and a twisted pair of
wires to carry the data.
• On the power wires, the computer can
supply up to 500 milliamps of power at 5
volts.
Type A
Type B
Type C
13
Universal Serial Bus (USB) Port
14
IEEE 1394 Interface
• The IEEE 1394 interface is a
serial bus interface standard for
high-speed communications and
isochronous real-time data transfer,
frequently used in a personal
computer (and digital audio and
digital video). The interface is also
known by the brand names of
FireWire (Apple Inc.), i.LINK
(Sony), and Lynx (Texas
Instruments). Though not as
widely used, the 1394 standard
also defines a backplane interface.
• Firewire 400-Speeds from 100,
200, or 400 Mbits/s half-duplex
• Firewire S3200-Speeds up to 3200
Mbits/s half-duplex
15
Network
16
Network
17
Network Topologies
• The network topology defines the
way in which computers,
printers, IEDs and other devices
are connected
• A network topology describes the
layout of the wire and devices as
well as the paths used by data
transmissions.
• Commonly, referred to as a linear
bus, all the devices on a bus
topology are connected by one
single cable.
18
PRP
Parallel Redundant Protocol
19
20
Standards
21
2008 Proposed
IEEE C37-2
Revision
presented at
Georgia Tech
Relay Conference
Copy at
www.
L-3.com/IEEE
22
OSI Model
23
Developed in 1978, the Open System Interconnection has 7
layers each performing part of the communications.
1) The physical level controls the physical connections between
devices, network topology, voltage levels to define 0’s and
1’s.RS232, RS485, and USB are 3 examples
2) Data link level provides framing
3) Network determines optima routing – IP of TCP/IP is based on this
4) Transport level guarantees delivery and is error free – the TCP of
TCP / IP (Transport Control Protocol / Internet Protocol) is at
transport level
5) Session mechanism for the establishment of a communications
session between applications
6) Presentation – correct translation of data
7) Application – provides the facilities or interface to allow the
application protocols or drivers such as Modbus or DNP
24
Ethernet
•
•
•
•
Introduction
10/100/1000 Base T
Hubs and Switches
Fiber
25
Introduction
26
Ethernet in Devices
Relays do not use DHCP - Dynamic Host Configuration Protocol
27
10/100 Base T
Max distance 100 meters or 328 feet
28
10/100/1000 Base T
Cat 5 Cable
Cat 5e Cable
Cat 6 Cable (up to 250 Mhz)
Cat 6A (Augmented-up to 500 Mhz)
29
Power over Ethernet (PoE)How does it work?
Note:
RJ45 Socket Pin-out
RJ45 Connector Pin-out
Source - http://pinouts.ru/Net/poe_pinout.shtml
Which pin-out to use is determined
by an interrogation between the
switch and the end device.
All wiring is STANDARD EtherNet.
Fiber
Power Budget
31
Single and Multi Mode Fiber
32
Single and Multi Mode Fiber
62.5 micrometers and now 50 micrometers
33
Common Fiber Connectors
ST-Straight tip
LC-Lucent Connector
SC-Subscriber Connector
Primary
Ethernet Port
Redundant
Ethernet Port
34
Traditional Switchyard Construction
Traditional Breaker Wiring
Traditional Cable Trench
Thousands of Copper
Wires from Switchyard
Labor Intensive Copper
Wiring on Relay Panels
Hard Fiber Eliminating Complexity
Eliminates 33
of breaker
terminations
40 less cabling
with no
terminations
required
Eliminate 90 of
control building
terminations
1,000’s of wires
replaced with few
communication
cables
36
Hubs and Switches
37
Managed Switches
• Simple Network Management Protocol (SNMP): a set of
protocols for managing network performance, finding and
solving network problems, and planning for network growth
• Internet Group Management Protocol (IGMP): configures
broadcast message behavior
• Virtual LAN (VLAN): a network of computers that behave as
if they are connected to the same wire even though they may
actually be physically located on different segments of a LAN
• Quality of service (QoS): Allows prioritization of packets to
occur or improve performance for key channels
• Rapid Spanning Tree Protocol (RSTP): algorithm to prevent
wiring topology mistakes or create redundancy in a network
38
Industrial Switches for the Plant Floor
39
Hubs and Switches
40
Wireless
• This is where the future is. Products are now
being designed with Wireless build into the
device.
• Regulated and unregulated frequencies
– 900 Mhz
– 2400 Mhz
– 1800 / 3650 / 5800 Mhz
• Different speeds depending on the application
• As the Frequency goes up, the distance goes
down
41
42
Router
• Definition from Wikipedia - A router is a
computer networking device that forwards data
packets across a network toward their
destinations, through a process known as
routing. Routing occurs at Layer 3 (the
network layer i.e. Internet Protocol (IP) of the
OSI seven-layer protocol stack.
Wikipedia and Linux are written collaboratively by volunteers and are “open source”
and free.
43
Other Computer Networking Devices
• Gateway: device sitting at a network node for
interfacing with another network that uses different
protocols. Works on OSI layers 4 to 7.
• Bridge: a device that connects multiple network
segments along the data link layer. Works on OSI
layer 2.
• Repeater: device to amplify or regenerate digital
signals received while setting them from one part of a
network into another. Works on OSI layer 1.
44
Other Terms
• PRP – Parallel Redundancy Protocol – Two
completely separate Lans going to the same
device
• Bandwidth – max data transfer rate
• Server - computer programs running to serve
the requests of other programs, the "clients“
• VPN – Virtual Private Network
• RSTP - Rapid Spanning Tree Protocol –
determines the path the message will take
between 2 nodes
45
Other Terms
• IRIG-B – Time code accurate to 10 ms
• SNTP – Simple Network Time Protocol –
typically 1 to 2 ms
• PTP (Precision time Protocol) time distribution
technologies sub-microsecond accuracy (GE
MultiSync 100)
• QoS- Quality of Service – Overall
performance of the network
46
Proxy, Firewall, and Port
• Proxy: computer network service which allows clients to
make indirect network connections to other network
services
• RADIUS Server: Remote Authentication Dial-In User
Service is a client/server protocol and software that enables
remote access servers to communicate with a
central serverto authenticate dial-in users and authorize
their access to the requested system or service.
47
Proxy, Firewall, and Port
• Firewall: a piece of hardware or software put on the
network to prevent some communications forbidden by the
network policy
• Computer port (hardware) - a physical interface between a
computer and other computers or devices (COM1)
• Computer port (software) - a virtual data connection
between computer programs possibly through a computer
network
48
Firewalls
From a Linksys router
49
Relays at L-3
Wan I.P
96.87.252.145
96.87.252.145
96.87.252.145
96.87.252.145
96.87.252.145
96.87.252.145
96.87.252.145
96.87.252.145
96.87.252.145
96.87.252.145
96.87.252.145
96.87.252.145
96.87.252.145
96.87.252.145
96.87.252.145:5
18
Firewall Technolog
Port
y
LAN IP
503
Relays
192.168.1.241
503
Relays
none
503
Relays
none
503
Relays
none
504
Relays
192.168.1.242
505
Relays
192.168.1.243
508
Relays
192.168.1.246
509
Relays
192.168.1.247
511
Relays
192.168.1.249
513
Relays
192.168.1.210
514
Relays
192.168.1.211
515
Relays
192.168.1.212
516
Relays
192.168.1.249
LAN Port
502
502
502
502
502
502
502
502
502
502
502
502
502
Slave
Address
1
45
89
242
243
254
254
254
254
254
254
254
517
Relays
192.168.10.238
502
1
518
Relays
192.168.10.238
502
1
Device
Multinet
PQM II
745
489
469
760
369
350
850
Rack T35
Rack B90
Rack M60
Rack PQM II
Rack EPM
7000
Web EPM
7000
Serial to Ethernet Converters
51
Serial to Ethernet Converters
52
Adding Devices to a Network
• Static IP address 3.94.244.1 for device
• Subnet 255.255.255.0 for network
– Go to Network and Sharing Center
– Change adapter settings
– Right click for properties
53
Adding Devices to a Network
DNS - Domain Name System, Internet system to translate names into IP addresses
IP v4 and IP v6 (8 groups of 4 hex digits 0db8:2001:85a3:0000:0000:8a2a:0370:7334)
54
Checking IP Address
55
Checking IP Address
56
Other useful Dos Command
•
•
•
•
ipconfig /release
ipconfig /renew
ipconfig /all (gives you IP and MAC address)
ping –t
– Control C to stop the ping
•
•
•
•
tracert
exit
You can hit F3 to go to the previous dos command
Or you can hit the up arrow to go back to previous
dos commands
57
ping
58
tracert
• Black list and White list
• Gray list
59
Useful Internet Sites and Programs
• www.Dnsstuff.com - can use to find if a web
site is getting blocked or who owns it.
• www.Speakeasy.net/speedtest/ - Can use for a
speed test
• www.Spinrite.com – Can use to check for
leaks in your firewall
• http://www.kloth.net/services/nslookup.php
get the IP address for a I.P. name.
• www.whatismyip.com – your WAN IP
• Wireshark - http://www.wireshark.org/
60
61
Wireshark
62
Protocols
•
•
•
•
•
•
•
•
•
•
•
Modbus
Modbus Plus
DNP
DeviceNet and EtherNet/IP
Profibus and Profinet
Direct I/O
IEC 61850
Hart
BACnet
EtherCat
Protocol Converters
63
Modbus
• Can be communicated via RS 232, RS485, 10/100
Base T, and 10/100 Base F
• Is half-duplex serial in all configurations
• Uses a master and slaves
• Data is stored in registers
64
Modbus Plus
• Proprietary protocol
• Can be communicated via RS485 or ethernet. Uses a
peer-to-peer token exchange type network. MultiMaster.
• Global data can be sent with the token.
• 64 nodes per network, can Bridge networks.
• Speeds up to 1 MB
• Up to 1800 meters with repeaters
65
Digital Network Protocol
(DNP 3)
•
•
•
•
•
•
•
•
Developed by GE Harris – can time stamp data
Scalable
Has Client (computer) and server (device)
Also called Master and Slave
Can poll for change
Can set up for Unsolicited messaging from server
Can provide only changed values.
Can Prioritize messages
66
Digital Network Protocol
(DNP 3)
67
DeviceNet (serial)
EtherNet/IP (Ethernet Industrial Protocol)
•
•
•
•
•
•
Based on the Controller Area Network protocol (CAN)
Managed by the Open DeviceNet Vendors Association
Bus Topology at 24 VDC
Baud rates of 125, 250, and 500 Kbps
Can have up to 64 nodes on a single local network
DeviceNet uses abstract OOT (Object-Oriented
Technique)
–
–
–
–
objects
class
instances
attributes
68
DeviceNet
69
Profibus (serial)
Profinet (ethernet)
• Profibus (Process Field Bus)
• Profibus-DP (Decentralized Periphery)
• Profibus -FMS (Fieldbus Message
Specification)
• Profibus -PA (Process Automation)
• Profinet – Ethernet based Field network
70
Profibus
71
Profibus
72
Profibus
73
IEC 61850
• Designed as a universal plug and play between
manufactures
• Uses descriptions instead of registers
• Generic Object Oriented Substation Event –
Messaging (GOOSE Messaging)
• Ethernet is required as part of IEC 61850
The phrase “sixty-one-eight-fifty”
has become a designator for the next generation substation
secondary system with a higher degree of integration,
reduced cost, greater flexibility, communication networks
replacing hard-wired connections, plug-and-play
functionality, reduced construction and commissioning
time, and other advantages
76
IEC 61860
77
78
IEC 61850 Applications
• Breaker Failure Initiate to Other Breaker
• Broadcast a Trip Message to All Feeder Breakers
– (Bus Differential)
•
•
•
•
•
•
•
High Speed Bus Transfer (M-T-M)
Switching Set Groups
Upstream Relay Tripping & Blocking
Bus Protection
Relay Voting
Reclose Initiation
Load Shedding
– KW or KVA Load Shedding
– Underfrequency Load Shedding
• Transfer Tripping
• Remote Start/Stop Commands
79
Hart
• HART (Highway Addressable Remote Transducer) Protocol is
the global standard for sending and receiving digital
information across analog wires between smart devices and
control or monitoring system.
80
BACnet
• BACnet (Building Automation and Control) was developed in
1987 by a group of HVAC and Building Automation
professionals as a standard, open protocol specifically for the
building automation industry. It is an ASHRAE, ANSI,
and ISO standard protocol.
• Protocol
– The BACnet protocol defines a number of services that are used to
communicate between building devices. The protocol services include
Who-Is, I-Am, Who-Has, I-Have, which are used for Device and
Object discovery. Services such as Read-Property and Write-Property
are used for data sharing. The BACnet protocol defines a number of
Objects that are acted upon by the services. The objects include Analog
Input, Analog Output, Analog Value, Binary Input, Binary Output,
Binary Value, Multi-State Input, Multi-State Output, Calendar, EventEnrollment, File, Notification-Class, Group, Loop, Program, Schedule,
Command, and Device.
81
EtherCat
• EtherCat is an Ethernet based fieldbus system designed for
extremely fast data update times in the range of < 100 µs.
• The Standard Ethernet packet or frame is no longer
received, interpreted, and copied as process data at every
node. The EtherCAT slave devices read the data addressed
to them while the telegram passes through the device,
processing data "on the fly". Similarly, input data are
inserted while the telegram passes through. A frame is not
completely received before being processed; instead
processing starts as soon as possible. Sending also is
conducted with a minimum delay of small bit times.
82
Protocol or Gateway Converters
83
Universal Gateway
There are Universal Gateways
and controllers that collects
metering, status, event, and fault
report data from serial or LAN
based Intelligent substation
devices. The Gateways
summarizes data from the
substation devices and makes it
available locally/remotely
through a standard secure web
browser (HTTPS).
84
Human Machine Interface (HMI)
•
•
•
•
•
Overview
Plug and Play
One-Line Viewer
Annunciator
OPC / DDE Server
85
HMI Overview
• SCADA – Supervisory Control And Data
Acquisition
• RTU – Remote Terminal Unit
• It is now extremely easy and cost effective to
view your devices without having to be in
front of the relays.
86
Plug and Play Viewpoint Monitoring
87
Dashboard
88
One-Line Viewer
89
One-Line Editor
90
Annunciator
91
Automatic Event and Waveform
Retrieval
92
Trending Reports
93
Comtrade Files
94
OPC
• The OPC Foundation is an industry
consortium that creates and maintains
standards for open connectivity of industrial
automation devices and systems. The OPC
standards specify the communication of
industrial process data, alarms and events,
historical data and batch process data between
sensors, instruments, controllers, software
systems and notification devices.
95
DDE
• Dynamic Data Exchange (DDE) is a
technology for communication between
multiple applications under Microsoft
Windows and OS/2.
• Microsoft Excel has a DDE server – you can
open a Microsoft Excel spreadsheet and fill it
with data, by opening a DDE conversation
with Excel and sending it DDE commands.
96
OPC / DDE
Server
97
Sources of Information
• http://www.gegridsolutions.com/resources.htm
– GE Multilin Communications Training CD
•
•
•
•
http://www.wikipedia.org/
http://www.profibus.com/wbt/en/wbt1/
http://www.odva.org/
http://www.dnp.org/
98
Website:
www.L-3.com
99
Thank You
100