Download Power Electronics / Electrical Machines / Drive - Lucas

Table of Contents
Table of Contents
Power Electronics / Electrical Machines / Drive Technology
Electrical Machines with UniTrain-I
EEM Electrical machines 300W
1
3
3
6
EEM 2-3 DC machines 300W
EEM 3-3 AC machines 300W
6
10
EEM 3.1-3 Universal motor 300W
EEM 3.3-3 Single-phase induction motor with bifilar starting winding 300W
EEM 3.4-3 Single-phase induction motor with operating and auxiliary capacitor 300W
EEM 3.5-3 Split-pole motor 300W
EEM 4-3 Asynchronous machines 300W
11
14
16
19
22
EEM 4.1-3 Three-phase induction motor with squirrel cage and distinct pull-out torque 300W
EEM 4.2-3 Three-phase induction motor with squirrel-cage, pole-changing according to 23
Dahlander 300W
26
EEM 4.3-3 Three-phase induction motor with squirrel cage, pole-changing with 2 separate
windings 300W
29
EEM 4.4-3 Three-phase motor with slip-rings (slip-ring rotor) 300W
32
EEM 4.5-3 Fault simulation on electrical machines 300W
35
EEM 4.6-3 Protection for electrical machines 300W
38
EEM 5-3 Synchronous machines and mains synchronisation; reluctance machines 300W
EEM 5.1-3 Synchronous machines 300W
4141
EEM 5.2-3 Mains synchronisation 300W
EEM 5.3-3 Three-phase reluctance machine 300W
45
48
EEM 11-3 Energy-saving drives 300W
51
EEM 11.1-3 Energy efficient drive design 300W
EEM 11.2-3 Use of energy-saving motors 300W
EEM 11.3-3 Energy-savings drives using frequency converters 300W
52
55
58
Power electronics with UniTrain-I
EPE Power electronics and drives 300W
61
64
Converters
64
EPE 30-3 Line commutated converter circuits 300W
EPE 40-3 Self-commutated converter circuits 300W
65
67
Drives
69
EPE 31-3 Converter drives with DC motors 300W
EPE 41-3 Frequency converter drives with three-phase asynchronous motor 300W
EPE 42-3 Servo drive, electronically commutated motor 300W
EPE 43-3 Converter drives with DC motor 300W
Designing drive controllers with Matlab - Simulink 300W
70
73
76
79
82
EPE 51-3 Field-oriented control of asynchronous machine with Matlab - Simulink 300W
EPE 52-3 Regulated permanent magnet servo drive with Matlab - Simulink 300W 8683
EPE 53-3 DC drives with cascade control using Matlab - Simulink 300W
89
ENT 5 Single-Phase and Three-Phase Transformers
Industrial drive technology 300W
EDT 17-3 Smooth starting three-phase machines
EDT 25-3 Frequency converter drives 300W
Frequency converter Lenze 8400 1phase
Frequency converter Lenze 8400 3phase
Lucas Nülle GmbH
Page 1/205
92
94
95
98
99
102
www.lucas-nuelle.com
EDT 33-3 Positioning with linear axis 300W
EDT 51 Motor management relays
105
108
EEM Electrical machines 1kW
111
EEM 2-1 DC machines 1kW
EEM 3-1 AC machines 1kW
111
115
EEM 3.1-1 Universal motor 1kW
EEM 3.3-1 Single-phase induction motor with bifilar starting winding 1kW
EEM 3.4-1 Single-phase induction motor with operating and auxiliary capacitor 1kW
EEM 4-1 Asynchronous machines 1kW
116
119
122
125
EEM 4.1-1 Three-phase induction motor with squirrel cage and distinct pull-out torque 1kW
EEM 4.2-1 Three-phase induction motor with squirrel-cage, pole-changing according to 126
Dahlander 1kW
129
EEM 4.3-1 Three-phase induction motor with squirrel cage, pole-changing with 2 separate
windings 1kW
132
EEM 4.4-1 Three-phase motor with slip-rings (slip-ring rotor) 1kW
135
EEM 4.5-1 Fault simulation on electrical machines 1kW
138
EEM 4.6-1 Protection for electrical machines 1kW
141
EEM 5-1 Synchronous machines and mains synchronisation; reluctance machines 1kW
EEM 5.1-1 Synchronous machines 1kW
145144
EEM 5.2-1 Mains synchronisation 1kW
EEM 5.3-1 Three-phase reluctance machine 1kW
148
151
Power electronics and didactically-optimized drives 1kW
154
Converters
154
EPE 30-1 Line commutated converter circuits 1kW
EPE 40-1 Self-commutated converter circuits 1kW
155
157
Drives
159
EPE 31-1 Converter drives with DC motors 1kW
EPE 41-1 Frequency converter drives with three-phase asynchronous motor 1kW
EPE 42-1 Servo drive, electronically commutated motor 1kW
EPE 43-1 Converter drives with DC motor 1kW
Designing drive controllers with Matlab - Simulink 1kW
160
163
166
169
172
EPE 51-1 Field-oriented control of asynchronous machine with Matlab - Simulink 1kW
EPE 52-1 Regulated permanent magnet servo drive with Matlab - Simulink 1kW 176173
EPE 53-1 DC drives with cascade control using Matlab - Simulink 1kW
179
Industrial drive technology 1kW
182
EDT 17-1 Smooth starting three-phase machines 1kW
EDT 25-1 Drives with frequency converter drives 1kW
Frequency converter Lenze 8400 1phase
Frequency converter Lenze 8400 3phase
Basic equipment set, consisting of:
183
186
187
190
191
EDT 51-1 Motor management relays 1kW
Equipment sets for practical training
Making windings in electrical machines and transformers
194
197
197
EMW 10 Making transformer windings
EMW 20 Electrical machine windings
198
201
Assembly of industrial control cabinets
203
EPL 25 Frequency converters project work kit
Lucas Nülle GmbH
Page 2/205
204
www.lucas-nuelle.com
Power Electronics / Electrical Machines / Drive
Technology
Equipment and systems for vocational qualifications and engineering education on the following topics:
Electrical machines, power electronics, drive technology
Complete machine labs, electrical machine labs and drive technology
Electrical Machines with UniTrain-I
Electrical Machines with UniTrain-I
UniTrain-I multimedia courses on electrical machines encompass the entire spectrum of electrical machines.
The motors are characterised by their open, accessible stators. These are built onto experiment cards and thus
allow a detailed view of the internal design of electrical machines. In addition, the open design makes it possible
to exchange rotors quickly and without tools.
Students taking the course are familiarised with the physical principles, the operation, properties and basic
circuitry for various machines. In many experiments the machines are put into operation and their electrical
properties measured using multimeters and oscilloscope, control units are set up and the safe usage of
electrical machines is reinforced.
List of articles:
Lucas Nülle GmbH
Page 3/205
www.lucas-nuelle.com
A host of multimedia courses are available for the UniTrain-I system in the areas of electrical engineering and
electronics. Each of the courses consists of the training program, specific circuitry on one or more experiment
cards and a browser (LabSoft) for the control, management and display of the training course. UniTrain-I courses
convey practical skills by providing a theoretical basis then guiding students through numerous experimental
measurements. Experiment cards are linked to the Interface and the training program via Experimenters. With
the help of virtual instruments and power sources included with the system, circuits can be analysed and results
of measurements stored directly within the training program.
Hardware
Experiment cards with specific circuits and components allowing the measurements in the course to be
made as well as permitting unguided experimentation.
Simple set-up: simply insert into the Experimenter
Experiment cards connected to the system via UniTrain-I bus
Modifiable, open experiment set-up on experiment cards allow experiments to be started quickly
Points for measurement all made available via 2-mm sockets
Systematic fault simulation, faults can be switched on and off by relays via the UniTrain-I bus
Industry-standard circuits, highly relevant to modern practice
Supplied in hard case for transport and storage
Software
Interactive, HTML-based multimedia courses to provide theoretical knowledge and practical skills
Theory, experimental procedure, evaluation, fault simulation and sample solutions
Animations, graphics and images to explain theory and experiment set-ups
All courses may be edited using an HTML editor
LabSoft: browser with menu, navigation and display windows for display and conduct of all UniTrain-I
courses
Virtual instruments (VIs) are made available for real-time measurement or for generating output signals.
Navigation to any point within the course
User-specific documentation, evaluation and storage of experimental results
Management of courses, users and user groups
Optional integration of circuit simulator, course editor, etc. into the menu structure.
Self-designed courses may be integrated and displayed
Languages: D, GB, F, E (others available on request)
Pos.
Product name
Bestell-Nr.
1 Course - Electric Machines 1: DC machines
Lucas Nülle GmbH
Page 4/205
SO4204-7S
Anz.
1
www.lucas-nuelle.com
2 Course - Electric Machines 2: Asynchronous machines
SO4204-7T
1
3 Course - Electric Machines 3: Synchronous and slip-ring machines
SO4204-7U
1
4 Course - Electric Machines 5: Stepper motors
SO4204-7W
1
5 Course - Electric Machines 6: Linear motors
SO4204-7X
1
6 Course - Electric Machines 7: BLDC/servo motors
SO4204-7Z
1
7 Course - Single- and Three-phase transformers
SO4204-7Y
1
Additionally required:
Pos.
Product name
Bestell-Nr.
Anz.
8 UniTrain Interface with virtual instruments (basic VI)
CO4203-2A
1
9 UniTrain Experimenter
CO4203-2B
1
SO4203-2J
1
Bestell-Nr.
Anz.
10 UniTrain-I measurement accessories, shunts and connection
cables
Additionally recommended
Pos.
Product name
11 Multi13S digital multimeter
LM2330
1
12 UniTrain storage case for one system
CO4203-2Y
1
Lucas Nülle GmbH
Page 5/205
www.lucas-nuelle.com
EEM Electrical machines 300W
EEM Electrical machines 300W
Electrical machines convert electrical energy into mechanical energy or vice versa. A fundamental distinction
can be drawn between DC, AC and three-phase machines.
The machines used for training in electrical engineering are designed so that nearly all of the circuitry and drives
found in industry, commerce and at home can be conveyed in a didactic fashion in hands-on training. Using the
servo drive and braking system it is possible to easily determine all of the relevant data for electrical machines.
Lucas Nülle GmbH
Page 6/205
www.lucas-nuelle.com
EEM 2-3 DC machines 300W
EEM 2-3 DC machines 300W
In spite of their declining use for industrial purposes DC machines constitute the basis for learning about
electrical machines. They demonstrate in a straight-forward manner the various possibilities of open- and closedloop control of machines.
The following training objectives are dealt with for shunt-wound, series-wound and compound-wound machines:
Motor operation:
Motor connection
Comparison of shunt-wound, series-wound and compound-wound machines
Typical machine data
Open-loop speed control with starter and field regulator
Reversing the rotation direction
Load characteristics at constant input voltage
Measurement evaluations
Generator operation:
Generator connection
Armature voltage as a function of the exciter current
Function and application of the field regulator
Voltage control, self-excitation and separate excitation
Armature current and armature voltage at constant speed and constant exciter current
Load diagram of the generator
Lucas Nülle GmbH
Page 7/205
www.lucas-nuelle.com
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
13 DC multi-circuit, compound wound machine, 0.3kW
SE2672-3D
1
14 Universal rheostat for 300W machines
CO3212-6W
1
15 Digital/analog multimeter, wattmeter, power-factor incl. software
CO5127-1Z
1
Media:
Pos.
Product name
Bestell-Nr.
16 Interactive Lab Assistant: DC machines 0.3/1 kW
Anz.
SO2800-1A
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
17 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
18 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
19 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
20 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Lucas Nülle GmbH
Page 8/205
www.lucas-nuelle.com
Power supply:
Pos.
Product name
Bestell-Nr.
21 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
22 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
23 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
24 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
25 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
26 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
27 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
28 Protected power distribution for working stations
ST8008-8M
1
29 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
30 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
31 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
Lucas Nülle GmbH
Page 9/205
www.lucas-nuelle.com
32 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
33 Protection cover for three-level experiment trolleys
ST8010-9Y
1
EEM 3-3 AC machines 300W
EEM 3-3 AC machines 300W
AC machines can be found with power levels of up to several kW. Their main area of use is in operating mobile
loads. AC machines span every area of daily life starting with your electric razor, all the way to washing
machines.
The training objectives are:
Motor connection
Reversing rotation direction
Typical characteristics
Load and run-up characteristics
Measurement evaluations
Lucas Nülle GmbH
Page 10/205
www.lucas-nuelle.com
EEM 3.1-3 Universal motor 300W
EEM 3.1-3 Universal motor 300W
The following training objectives are dealt with for the universal motor:
Motor connection
Typical machine data
Reversing the rotation direction
Load characteristics
Measurement evaluations
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
34 Universal motor, 0.3kW
SE2672-3E
1
35 Cut-out switch, 4 pole
CO3212-1W
1
Lucas Nülle GmbH
Page 11/205
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
36 Interactive Lab Assistant: AC machines 0.3/1 kW
Anz.
SO2800-1B
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
37 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
38 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
39 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
40 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
41 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
42 Digital/analog multimeter, wattmeter, power-factor incl. software
Lucas Nülle GmbH
Page 12/205
Anz.
CO5127-1Z
1
www.lucas-nuelle.com
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
43 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
44 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
45 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
46 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
47 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
48 Protected power distribution for working stations
ST8008-8M
1
49 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
50 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
51 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
52 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
53 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 13/205
www.lucas-nuelle.com
EEM 3.3-3 Single-phase induction motor with bifilar starting winding 300W
EEM 3.3-3 Single-phase induction motor with bifilar starting winding 300W
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
54 AC-motor with bifilar winding, 0.3kW
SE2672-3N
1
55 Cut-out switch, 4 pole
CO3212-1W
1
Media:
Pos.
Product name
Bestell-Nr.
56 Interactive Lab Assistant: AC machines 0.3/1 kW
Lucas Nülle GmbH
Page 14/205
SO2800-1B
Anz.
1
www.lucas-nuelle.com
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
57 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
58 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
59 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
60 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
61 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
62 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
63 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
64 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
Lucas Nülle GmbH
Page 15/205
www.lucas-nuelle.com
65 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
66 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
67 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
68 Protected power distribution for working stations
ST8008-8M
1
69 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
70 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
71 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
72 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
73 Protection cover for three-level experiment trolleys
ST8010-9Y
1
EEM 3.4-3 Single-phase induction motor with operating and auxiliary capacitor 300W
EEM 3.4-3 Single-phase induction motor with operating and auxiliary capacitor 300W
Lucas Nülle GmbH
Page 16/205
www.lucas-nuelle.com
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
74 AC-motor with starting & operating capacitor, 0.3kW
SE2672-3P
1
75 Cut-out switch, 4 pole
CO3212-1W
1
Media:
Pos.
Product name
Bestell-Nr.
76 Interactive Lab Assistant: AC machines 0.3/1 kW
Anz.
SO2800-1B
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
77 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
78 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
79 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
80 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Lucas Nülle GmbH
Page 17/205
www.lucas-nuelle.com
Pos.
Product name
Bestell-Nr.
81 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
82 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
83 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
84 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
85 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
86 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
87 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
88 Protected power distribution for working stations
ST8008-8M
1
89 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
90 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
91 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
92 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
Lucas Nülle GmbH
Page 18/205
www.lucas-nuelle.com
93 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Bestell-Nr.
Anz.
EEM 3.5-3 Split-pole motor 300W
EEM 3.5-3 Split-pole motor 300W
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
94 Split-pole motor, 0.1kW (industrial line)
SE2672-1Q
1
95 Cut-out switch, 4 pole
CO3212-1W
1
Media:
Pos.
Product name
Bestell-Nr.
96 Interactive Lab Assistant: AC machines 0.3/1 kW
Lucas Nülle GmbH
Page 19/205
SO2800-1B
Anz.
1
www.lucas-nuelle.com
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
97 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
98 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
99 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
SO6200-7D
1
100 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
Power supply:
Pos.
Product name
Bestell-Nr.
101 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
102 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
103 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
104 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
Lucas Nülle GmbH
Page 20/205
www.lucas-nuelle.com
105 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
106 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
107 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
108 Protected power distribution for working stations
ST8008-8M
1
109 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
110 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
111 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
112 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
113 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 21/205
www.lucas-nuelle.com
EEM 4-3 Asynchronous machines 300W
EEM 4-3 Asynchronous machines 300W
Asynchronous machines can be found with power levels ranging up into the MW range. Due to their simple
design asynchronous squirrel-cage machines are particularly widespread.
The training objectives are:
Motor connection
Reversing rotation direction
Manual switching
Machine-specific values and characteristics
Measurement evaluation
Lucas Nülle GmbH
Page 22/205
www.lucas-nuelle.com
EEM 4.1-3 Three-phase induction motor with squirrel cage and distinct pull-out torque 300W
EEM 4.1-3 Three-phase induction motor with squirrel cage and distinct pull-out
torque 300W
Additional training objectives:
Star-delta connection
Steinmetz circuit
Reactance power compensation with capacitors of various capacitance
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
114 Three-phase asynchronous motor, squirrel-cage, 0.3 kW
SE2672-3G
1
115 Star-Delta switch
CO3212-2D
1
116 Cut-out switch, 4 pole
CO3212-1W
1
117 Capacitive load, three-phase, 14-stage,
CO3212-6X
1
Lucas Nülle GmbH
Page 23/205
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
118 Interactive Lab Assistant: Asynchronous machines 0.3/1kW
Anz.
SO2800-1C
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
119 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
120 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
121 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
122 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
123 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
124 Digital/analog multimeter, wattmeter, power-factor incl. software
Lucas Nülle GmbH
Page 24/205
Anz.
CO5127-1Z
1
www.lucas-nuelle.com
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
125 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
126 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
127 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
128 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
129 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
130 Protected power distribution for working stations
ST8008-8M
1
131 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
132 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
133 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
134 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
135 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 25/205
www.lucas-nuelle.com
EEM 4.2-3 Three-phase induction motor with squirrel-cage, pole-changing according to Dahlander
300W
EEM 4.2-3 Three-phase induction motor with squirrel-cage, pole-changing according to Dahlander
300W
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
136 Three-phase asynchronous motor, Dahlander, 0.3kW
SE2672-3K
1
137 Pole reverser Dahlander
CO3212-2H
1
Media:
Pos.
Product name
Bestell-Nr.
138 Interactive Lab Assistant: Asynchronous machines 0.3/1kW
Lucas Nülle GmbH
Page 26/205
Anz.
SO2800-1C
1
www.lucas-nuelle.com
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
139 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
140 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
141 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
142 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
143 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
144 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
145 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
146 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
Lucas Nülle GmbH
Page 27/205
www.lucas-nuelle.com
147 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
148 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
149 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
150 Protected power distribution for working stations
ST8008-8M
1
151 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
152 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
153 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
154 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
155 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 28/205
www.lucas-nuelle.com
EEM 4.3-3 Three-phase induction motor with squirrel cage, pole-changing with 2 separate windings
300W
EEM 4.3-3 Three-phase induction motor with squirrel cage, pole-changing with 2 separate windings
300W
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
156 Three-phase asynchronous motor, two separate windings, 0.3kW
SE2672-3L
1
157 Pole reverser for 2separate windings
CO3212-2K
1
Media:
Pos.
Product name
Bestell-Nr.
158 Interactive Lab Assistant: Asynchronous machines 0.3/1kW
Lucas Nülle GmbH
Page 29/205
Anz.
SO2800-1C
1
www.lucas-nuelle.com
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
159 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
160 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
161 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
162 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
163 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
164 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
165 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
166 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
Lucas Nülle GmbH
Page 30/205
www.lucas-nuelle.com
167 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
168 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
169 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
170 Protected power distribution for working stations
ST8008-8M
1
171 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
172 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
173 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
174 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
175 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 31/205
www.lucas-nuelle.com
EEM 4.4-3 Three-phase motor with slip-rings (slip-ring rotor) 300W
EEM 4.4-3 Three-phase motor with slip-rings (slip-ring rotor) 300W
Additional training objectives:
Starting
Speed control
Voltage, current and frequency in the rotor
Rotor frequency and speed
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
176 Three-phase multi-function machine, 0.3kW
SE2672-3W
1
177 Universal rheostat for 300W machines
CO3212-6W
1
178 Cut-out switch, 4 pole
CO3212-1W
1
Lucas Nülle GmbH
Page 32/205
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
179 Interactive Lab Ass.: Slip-ring rotors,sync. machines,
synchronisation 0.3/1 kW
Anz.
SO2800-1D
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
180 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
181 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
182 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
183 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
184 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
185 Digital/analog multimeter, wattmeter, power-factor incl. software
Lucas Nülle GmbH
Page 33/205
Anz.
CO5127-1Z
1
www.lucas-nuelle.com
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
186 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
187 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
188 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
189 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
190 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
191 Protected power distribution for working stations
ST8008-8M
1
192 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
193 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
194 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
195 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
196 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 34/205
www.lucas-nuelle.com
EEM 4.5-3 Fault simulation on electrical machines 300W
EEM 4.5-3 Fault simulation on electrical machines 300W
Fault simulation performed by measuring winding and insulation resistances. All measurements are performed in
the no-voltage state. The following faults can be simulated:
Winding breaks in the coils
Insulation faults winding to winding
Insulation faults winding to frame
Combinations of different faults
Fault monitoring and repair instructions
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
197 Fault simulator forthree-phase asynchronous squirrel-cage motor
SE2662-9D
1
198 Three-phase asynchronous motor, squirrel-cage, 0.3 kW
SE2672-3G
1
199 Insulation tester "Insu 10"
LM2333
1
Media:
Lucas Nülle GmbH
Page 35/205
www.lucas-nuelle.com
Pos.
Product name
Bestell-Nr.
200 Manual EEM/F, Troubleshooting on electrical machines
Anz.
SH5002-3P
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
201 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
202 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
203 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
204 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
205 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
206 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
207 Set of safety measurement cables, 4mm (31 leads)
Lucas Nülle GmbH
Page 36/205
Bestell-Nr.
Anz.
SO5148-1L
1
www.lucas-nuelle.com
208 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
209 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
210 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
211 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
212 Protected power distribution for working stations
ST8008-8M
1
213 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
214 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
215 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
216 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
217 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 37/205
www.lucas-nuelle.com
EEM 4.6-3 Protection for electrical machines 300W
EEM 4.6-3 Protection for electrical machines 300W
Squirrel cage motors are designed for operation with constant loading. Any change in load, or high currents
when starting up, may cause the nominal operating temperature to be exceeded. This training system conveys
how some of the most important protection circuits work.
Selection, installation and configuration of various motor protection systems
Motor protection switches
Motor protection relays
Thermistor protection
Effect of various operating systems on the heat of the motor
Triggering characteristics for protection systems
Protection from impermissible loading
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
218 Board for motor protection systems 300W
CO3213-7X
1
219 Three-phase induction motor with various temperature sensors,
0.3kW
SE2672-3Y
1
Lucas Nülle GmbH
Page 38/205
www.lucas-nuelle.com
220 Multi 18 digital multimeter
LM2331
1
Media:
Pos.
Product name
Bestell-Nr.
221 Manual EEM 4.6, Protection for electrical machines with servobrake
Anz.
SH5002-1U
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
222 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
223 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
224 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
225 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
226 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Lucas Nülle GmbH
Page 39/205
www.lucas-nuelle.com
Pos.
Product name
Bestell-Nr.
227 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
228 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
229 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
230 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
231 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
232 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
233 Protected power distribution for working stations
ST8008-8M
1
234 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
235 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
236 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
237 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
238 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 40/205
www.lucas-nuelle.com
EEM 5-3 Synchronous machines and mains synchronisation; reluctance machines 300W
EEM 5-3 Synchronous machines and mains synchronisation; reluctance machines 300W
Synchronous machines are primarily used as generators in power generation and as highly dynamic drives
(servos).
Lucas Nülle GmbH
Page 41/205
www.lucas-nuelle.com
EEM 5.1-3 Synchronous machines 300W
EEM 5.1-3 Synchronous machines 300W
Training objectives:
Motor operation:
Motor connection
Starting
Reversing rotation direction
Excitation and load angle
Synchronous compensator operation
Power factor and exciter current
Load characteristics in motor operation
V characteristics
Stability limits
Under- and over excitation
Measurement evaluation
Generator operation:
Generator connection
Voltage setting via the exciter current
Load characteristics in generator operation
Measurement evaluation
Lucas Nülle GmbH
Page 42/205
www.lucas-nuelle.com
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
239 Three-phase multi-function machine, 0.3kW
SE2672-3W
1
240 Universal rheostat for 300W machines
CO3212-6W
1
241 Exciter for 0-200V regulating transformer
CO3212-5Q
1
242 Cut-out switch, 4 pole
CO3212-1W
1
243 Digital/analog multimeter, wattmeter, power-factor incl. software
CO5127-1Z
1
Media:
Pos.
Product name
Bestell-Nr.
244 Interactive Lab Ass.: Slip-ring rotors,sync. machines,
synchronisation 0.3/1 kW
Anz.
SO2800-1D
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
245 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
246 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
247 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
Lucas Nülle GmbH
Page 43/205
www.lucas-nuelle.com
248 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
249 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
250 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
251 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
252 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
253 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
254 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
255 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
256 Protected power distribution for working stations
ST8008-8M
1
257 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
Lucas Nülle GmbH
Page 44/205
www.lucas-nuelle.com
258 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
259 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
260 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
261 Protection cover for three-level experiment trolleys
ST8010-9Y
1
EEM 5.2-3 Mains synchronisation 300W
EEM 5.2-3 Mains synchronisation 300W
Training objectives:
Design and connection of the synchronising circuit
Comparison of bright, dark and three-lamp synchronising circuit
Mains synchronisation with double frequency meter, double voltage meter, synchronoscope and zerovoltage meter
Supplementary equipment set to synchronous machine, consisting of:
Pos.
Product name
Bestell-Nr.
262 Motor protection switch, 0.45 - 0.63A
Lucas Nülle GmbH
CO3212-1J
Page 45/205
Anz.
1
www.lucas-nuelle.com
263 Synchronization Unit
CO3212-6V
1
Media:
Pos.
Product name
Bestell-Nr.
264 Interactive Lab Ass.: Slip-ring rotors,sync. machines,
synchronisation 0.3/1 kW
Anz.
SO2800-1D
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
265 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
266 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
267 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
268 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
269 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Lucas Nülle GmbH
Page 46/205
www.lucas-nuelle.com
Pos.
Product name
Bestell-Nr.
270 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
271 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
272 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
273 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
274 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
275 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
276 Protected power distribution for working stations
ST8008-8M
1
277 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
278 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
279 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
280 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
281 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 47/205
www.lucas-nuelle.com
EEM 5.3-3 Three-phase reluctance machine 300W
EEM 5.3-3 Three-phase reluctance machine 300W
Experiment topics:
Machine connection
Starting
Reversing rotation direction
Load characteristics
Measurement evaluation
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
282 Reluctance motor, 0.3kW
SE2672-3U
1
283 Cut-out switch, 4 pole
CO3212-1W
1
Lucas Nülle GmbH
Page 48/205
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
284 Interactive Lab Ass.: Slip-ring rotors,sync. machines,
synchronisation 0.3/1 kW
Anz.
SO2800-1D
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
285 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
286 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
287 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
288 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
289 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
290 Digital/analog multimeter, wattmeter, power-factor incl. software
Lucas Nülle GmbH
Page 49/205
Anz.
CO5127-1Z
1
www.lucas-nuelle.com
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
291 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
292 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
293 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
294 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
295 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
296 Protected power distribution for working stations
ST8008-8M
1
297 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
298 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
299 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
300 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
301 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 50/205
www.lucas-nuelle.com
EEM 11-3 Energy-saving drives 300W
EEM 11-3 Energy-saving drives 300W
One of the world’s greatest challenges today and in the future is how to save energy. In the world of automation
there is scarcely a single area that is not powered by electrical drives. It is due to this prevalence and broad
application spectrum that this area constitutes such an effective lever in boosting energy efficiency.
Lucas Nülle GmbH
Page 51/205
www.lucas-nuelle.com
EEM 11.1-3 Energy efficient drive design 300W
EEM 11.1-3 Energy efficient drive design 300W
Energy saving begin with the correct design of the motor. A well matched motor and drive unit increases the
efficiency of the system. The correct drive design brings the biggest energy savings.
Learning objectives:
Detect losses in the drive system
Motor parameters investigated through the basis of the characteristic curves
Motor operation at full and partial loads
Motor operation with various types of loads
Comparison of different motor and drive designs
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
302 Three-phase asynchronous motor, 0.3kW n=1400 (230V/400V)
SE2673-1K
1
303 Cut-out switch, 4 pole
CO3212-1W
1
Lucas Nülle GmbH
Page 52/205
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
304 Interactive Lab Assistant: Energy efficient drives
Anz.
SO2800-1F
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
305 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
306 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
307 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
308 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
309 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
310 Digital/analog multimeter, wattmeter, power-factor incl. software
Lucas Nülle GmbH
Page 53/205
Anz.
CO5127-1Z
1
www.lucas-nuelle.com
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
311 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
312 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
313 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
314 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
315 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
316 Protected power distribution for working stations
ST8008-8M
1
317 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
318 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
319 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
320 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
321 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 54/205
www.lucas-nuelle.com
EEM 11.2-3 Use of energy-saving motors 300W
EEM 11.2-3 Use of energy-saving motors 300W
Over 90% of a motor’s total costs are due to energy costs. The use of energy efficient motors allows us to spare
the environment and cut operating costs.
Training objectives:
Design and operation of energy-saving motors
Classes of energy-efficient motor
Comparing energy-efficient motors to standard motors
Operating characteristics of energy-saving motors
Determining the potential for energy-savings
Supplementary set to EEM11.1 Energy-efficient drives, consisting of:
Pos.
Product name
Bestell-Nr.
322 Energy-efficient motor, 0.37kW
SE2673-1N
Anz.
1
Media:
Lucas Nülle GmbH
Page 55/205
www.lucas-nuelle.com
Pos.
Product name
Bestell-Nr.
323 Interactive Lab Assistant: Energy efficient drives
Anz.
SO2800-1F
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
324 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
325 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
326 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
327 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
328 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
329 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
330 Set of safety measurement cables, 4mm (31 leads)
Lucas Nülle GmbH
Page 56/205
Bestell-Nr.
Anz.
SO5148-1L
1
www.lucas-nuelle.com
331 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
332 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
333 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
334 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
335 Protected power distribution for working stations
ST8008-8M
1
336 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
337 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
338 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
339 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
340 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 57/205
www.lucas-nuelle.com
EEM 11.3-3 Energy-savings drives using frequency converters 300W
EEM 11.3-3 Energy-savings drives using frequency converters 300W
In almost any mechanical process the need for power varies. In these cases energy efficiency can be boosted to
a considerable degree thanks to frequency converters.
Training objectives:
Putting speed-variable drives into operation
Investigating the effect of different parameters on the operating response
Adapting energy-efficiency to the operating point
Drafting energy-efficient motion profiles
Taking the efficiency of the entire system into consideration
Supplementary set to EEM11.1 Energy-efficient drives, consisting of:
***************Optional*******************
Pos.
Product name
Bestell-Nr.
Anz.
341 Frequency converter 0.75kW (Lenze 8400)
CO3636-5G
1
342 Brake resistor 0.2kW for frequency converters
CO3636-5V
1
343 USB diagnostic adapter for Lenze 8400 frequency converter
LM8929
1
Lucas Nülle GmbH
Page 58/205
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
344 Interactive Lab Assistant: Energy efficient drives
Anz.
SO2800-1F
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
345 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
346 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
347 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
348 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
349 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
350 Digital/analog multimeter, wattmeter, power-factor incl. software
Lucas Nülle GmbH
Page 59/205
Anz.
CO5127-1Z
1
www.lucas-nuelle.com
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
351 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
352 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
353 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
354 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
355 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
356 Protected power distribution for working stations
ST8008-8M
1
357 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
358 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
359 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
360 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
361 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 60/205
www.lucas-nuelle.com
Power electronics with UniTrain-I
Power electronics with UniTrain-I
UniTrain-I multimedia courses in power electronics use numerous experiments and animations to explain the
design and function of various types of converters. Students taking the courses are familiarised with the various
types of power semiconductor devices and become familiar with the common circuits in which they are used.
Different types of circuits are used in a large number of experiments that deal with triggering, modulation and
instrumentation involving multimeters and oscilloscope as well as deriving the properties and capabilities of
converters.
List of articles:
Lucas Nülle GmbH
Page 61/205
www.lucas-nuelle.com
A host of multimedia courses are available for the UniTrain-I system in the areas of electrical engineering and
electronics. Each of the courses consists of the training program, specific circuitry on one or more experiment
cards and a browser (LabSoft) for the control, management and display of the training course. UniTrain-I courses
convey practical skills by providing a theoretical basis then guiding students through numerous experimental
measurements. Experiment cards are linked to the Interface and the training program via Experimenters. With
the help of virtual instruments and power sources included with the system, circuits can be analysed and results
of measurements stored directly within the training program.
Hardware
Experiment cards with specific circuits and components allowing the measurements in the course to be
made as well as permitting unguided experimentation.
Simple set-up: simply insert into the Experimenter
Experiment cards connected to the system via UniTrain-I bus
Modifiable, open experiment set-up on experiment cards allow experiments to be started quickly
Points for measurement all made available via 2-mm sockets
Systematic fault simulation, faults can be switched on and off by relays via the UniTrain-I bus
Industry-standard circuits, highly relevant to modern practice
Supplied in hard case for transport and storage
Software
Interactive, HTML-based multimedia courses to provide theoretical knowledge and practical skills
Theory, experimental procedure, evaluation, fault simulation and sample solutions
Animations, graphics and images to explain theory and experiment set-ups
All courses may be edited using an HTML editor
LabSoft: browser with menu, navigation and display windows for display and conduct of all UniTrain-I
courses
Virtual instruments (VIs) are made available for real-time measurement or for generating output signals.
Navigation to any point within the course
User-specific documentation, evaluation and storage of experimental results
Management of courses, users and user groups
Optional integration of circuit simulator, course editor, etc. into the menu structure.
Self-designed courses may be integrated and displayed
Languages: D, GB, F, E (others available on request)
Pos.
Product name
Bestell-Nr.
362 Course - Power electronics 1: Line-commutated power
converters, 3-phase
Lucas Nülle GmbH
Page 62/205
Anz.
SO4204-7N
1
www.lucas-nuelle.com
363 Course - Power electronics 2: Self-commutated power converters
SO4204-7M
1
364 Course - Power electronics 3: Frequency converter drives
SO4204-7P
1
365 Course - Power electronics 4: Active power factor correction PFC
SO4204-7Q
1
Additionally required:
Pos.
Product name
Bestell-Nr.
Anz.
366 UniTrain Interface with virtual instruments (basic VI)
CO4203-2A
1
367 UniTrain Experimenter
CO4203-2B
2
368 UniTrain-I measurement accessories, shunts and connection
cables
SO4203-2J
1
Bestell-Nr.
Anz.
Additionally recommended
Pos.
Product name
369 Multi13S digital multimeter
LM2330
1
370 UniTrain storage case for one system
CO4203-2Y
1
Lucas Nülle GmbH
Page 63/205
www.lucas-nuelle.com
EPE Power electronics and drives 300W
EPE Power electronics and drives 300W
Power electronics is the technology of switching and converting high levels of electrical power. Today this is
done using semiconductor components like diodes, thyristors and IGBTs. The main area of application for power
electronics is drive technology. The modular training system accompanies you on your journey from static
converter technology to closed-loop control drives and offers you the possibility of dealing in detail with the
topics most relevant to you. The modular system with training panels and the systematic software support
allows for continuous upgrading, supplements or technology-prompted extensions.
Converters
Lucas Nülle GmbH
Page 64/205
www.lucas-nuelle.com
Converters
EPE 30-3 Line commutated converter circuits 300W
EPE 30-3 Line commutated converter circuits 300W
Training objectives:
Fundamentals of the diode, thyristor, triac
Rectification
Control principles: phase-control, full-wave control, burst firing control, pulse pattern control, rectifier
operation, inverter operation
Circuits: M1, M2, M3, B2, B6, M1C, M2C, M3C, B2C, B6C, B2HA, B2HK, B2HZ, B6C, B6HA, B6HK,
W1C, W3C
Resistive and inductive loads
Control characteristics and operating graphs
Suppressor circuit
Computer-assisted data acquisition
Frequency analysis and examination of harmonics
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
371 Line-commutated power converters circuits
Lucas Nülle GmbH
Page 65/205
Anz.
CO3636-3A
1
www.lucas-nuelle.com
372 Three-phase isolating transformer 300VA
CO3636-3E
1
373 Power electronics load set, 300 W
CO3636-3F
1
Media:
Pos.
Product name
Bestell-Nr.
374 Interactive Lab Assistant: Line-commutated power converter
circuits
Anz.
SO2800-2A
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
375 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
376 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
377 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
378 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
379 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
380 Protected power distribution for working stations
ST8008-8M
1
381 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
382 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
Lucas Nülle GmbH
Page 66/205
www.lucas-nuelle.com
383 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
384 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
385 Protection cover for three-level experiment trolleys
ST8010-9Y
1
EPE 40-3 Self-commutated converter circuits 300W
EPE 40-3 Self-commutated converter circuits 300W
Experiment topics:
Fundamentals: IGBT
Control principles: pulse-width modulation, DC chopper controller in 1-, 2- and 4-quadrant operation
Modulation of low-frequency AC voltage with pulse-width modulation
Circuits: step-down controller, H-bridge, inverter
Resistive and inductive loads
Suppressor circuit, link circuit, free-wheeling
Control characteristics and operating graphs
Clock frequency, ripple
Computer-assisted measurement technology,
Frequency analysis and examination of harmonics
Lucas Nülle GmbH
Page 67/205
www.lucas-nuelle.com
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
386 Self-commutated converter circuits
CO3636-3B
1
387 Three-phase isolating transformer 300VA
CO3636-3E
1
388 Power electronics load set, 300 W
CO3636-3F
1
Media:
Pos.
Product name
Bestell-Nr.
Anz.
SO2800-2J
1
Bestell-Nr.
Anz.
390 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
391 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
392 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
393 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
394 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
389 Interactive Lab Assistant: Self-commutated converter circuits
Accessories:
Pos.
Product name
Lucas Nülle GmbH
Page 68/205
www.lucas-nuelle.com
395 Protected power distribution for working stations
ST8008-8M
1
396 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
397 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
398 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
399 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
400 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Drives
Drives
Lucas Nülle GmbH
Page 69/205
www.lucas-nuelle.com
EPE 31-3 Converter drives with DC motors 300W
EPE 31-3 Converter drives with DC motors 300W
Training objectives:
Closed-loop speed control in 1- to 4-quadrant operation with and without cascade current control
Open-loop speed control with one-way converter
Open-loop control with two-way converter
Four-quadrant operation, energy feedback
Closed-loop speed control, current control, cascade control, adaptive control
Computer-assisted controlled-system and controller analysis, setting parameters
P-, PI-control
Optimisation of the controller
Supplementary set to EPE 30-3 line-commutated converters, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
401 DC multi-circuit, compound wound machine, 0.3kW
SE2672-3D
1
402 Tachogenerator 1V/1000 r.p.m., 0.3kW
SE2672-2U
1
403 Exciter for 0-200V regulating transformer
CO3212-5Q
1
Lucas Nülle GmbH
Page 70/205
www.lucas-nuelle.com
404 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
405 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
Media:
Pos.
Product name
Bestell-Nr.
406 Interactive Lab Assistant: Converter drives with DC motors
Anz.
SO2800-2B
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
407 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
408 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
409 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
410 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
411 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Accessories:
Lucas Nülle GmbH
Page 71/205
www.lucas-nuelle.com
Pos.
Product name
Bestell-Nr.
Anz.
412 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
413 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
414 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
415 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
416 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
417 Protected power distribution for working stations
ST8008-8M
1
418 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
419 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
420 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
421 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
422 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 72/205
www.lucas-nuelle.com
EPE 41-3 Frequency converter drives with three-phase asynchronous motor 300W
EPE 41-3 Frequency converter drives with three-phase asynchronous motor 300W
Training objectives:
Investigation of inverters with voltage and frequency control
Investigation of inverters with space vector modulation
Analysis of the voltage and frequency ratios
Stator resistance compensation
Investigation of the inverter drive
Computer-assisted setting of parameters and animation
Supplementary equipment set for EPE 40-3 - Self-commutated converters, consisting of the
following:
Pos.
Product name
Bestell-Nr.
423 Three-phase asynchronous motor, 0.3kW n=1400 (230V/400V)
SE2673-1K
Anz.
1
Media:
Lucas Nülle GmbH
Page 73/205
www.lucas-nuelle.com
Pos.
Product name
424 Interactive Lab Assistant: Frequency converter drives
Bestell-Nr.
Anz.
SO2800-2L
1
Bestell-Nr.
Anz.
Measuring instruments:
Pos.
Product name
425 Digital/analog multimeter, wattmeter, power-factor incl. software
CO5127-1Z
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
426 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
427 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
428 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
429 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
430 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
431 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
432 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
433 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
Lucas Nülle GmbH
Page 74/205
www.lucas-nuelle.com
434 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
435 Protected power distribution for working stations
ST8008-8M
1
436 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
437 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
438 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
439 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
440 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 75/205
www.lucas-nuelle.com
EPE 42-3 Servo drive, electronically commutated motor 300W
EPE 42-3 Servo drive, electronically commutated motor 300W
Training objectives:
Operating principle of servo motors with electronic commutation or brushless DC motors
Analysis of field-oriented space-vector modulation
Investigation of coordinate and sensor systems
Computer-assisted setting of parameters and animation
Supplementary equipment set for EPE 40-3 - Self-commutated converters, consisting of the
following:
Pos.
Product name
Bestell-Nr.
Anz.
441 Synchronous servo motor 0.3kW
SE2672-3S
1
442 Incremental position encoder 1024 pulses
SE2663-3T
1
443 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
444 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
Lucas Nülle GmbH
Page 76/205
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
445 Interactive Lab Assistant: Servo motors, electronically
commutated motors
Anz.
SO2800-2M
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
446 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
447 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
448 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
449 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
450 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
451 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
452 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
Lucas Nülle GmbH
Page 77/205
www.lucas-nuelle.com
453 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
454 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
455 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
456 Protected power distribution for working stations
ST8008-8M
1
457 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
458 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
459 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
460 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
461 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 78/205
www.lucas-nuelle.com
EPE 43-3 Converter drives with DC motor 300W
EPE 43-3 Converter drives with DC motor 300W
Training objectives:
Closed-loop speed control in the 1 and 4 quadrant operation with and without cascade current control
Open-loop speed control in 1-quadrant operation with IGBT
Open-loop speed control in 4-quadrant operation with IGBT
Closed-loop speed control, closed-loop current control, cascade control, adaptive control
Computer-assisted controlled-system and controller analysis, setting parameter
P-, PI- control
Controller optimisation
Supplementary equipment set for EPE 40-3 - Self-commutated converters, consisting of the
following:
Pos.
Product name
Bestell-Nr.
Anz.
462 DC multi-circuit, compound wound machine, 0.3kW
SE2672-3D
1
463 Tachogenerator 1V/1000 r.p.m., 0.3kW
SE2672-2U
1
464 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
Lucas Nülle GmbH
Page 79/205
www.lucas-nuelle.com
465 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
Media:
Pos.
Product name
Bestell-Nr.
466 Interactive Lab Assistant: Inverter-fed drives with DC motors
Anz.
SO2800-2K
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
467 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
468 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
469 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
470 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
471 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Accessories:
Pos.
Product name
472 Set of safety measurement cables, 4mm (31 leads)
Lucas Nülle GmbH
Page 80/205
Bestell-Nr.
Anz.
SO5148-1L
1
www.lucas-nuelle.com
473 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
474 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
475 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
476 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
477 Protected power distribution for working stations
ST8008-8M
1
478 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
479 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
480 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
481 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
482 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 81/205
www.lucas-nuelle.com
Designing drive controllers with Matlab - Simulink 300W
Designing drive controllers with Matlab - Simulink 300W
Matlab enables rapid prototyping of embedded open-loop and closed-loop control systems. System designs can
first be investigated using a PC simulation. Then the next step is to apply the design to real hardware and test
it. This kind of simulation-based learning is motivating and interesting to students.
It enables drive systems, which are capable of operating in real time, to be programmed and tested using the
model-based design methods used in industry.
Training objectives:
Rapid implementation of user-defined and reconfigurable processor/hardware-in-the-loop systems using
automatic generation of code
Algorithm engineering to bridge the gap between theory and practice
Lucas Nülle GmbH
Page 82/205
www.lucas-nuelle.com
EPE 51-3 Field-oriented control of asynchronous machine with Matlab - Simulink 300W
EPE 51-3 Field-oriented control of asynchronous machine with Matlab - Simulink
300W
Training objectives:
Setting up a hardware-in-the-loop system under real-time conditions
Modelling and designing cascade closed-loop control for a DC motor on an ongoing design level
Reducing the control system to discrete components to run on a digital signal processor
Creation and optimisation of automatic flow-rate and speed controllers
Park- and Clarke transformation
Integration of the space phasor modulation to optimize the control of the IGBT
Speed detection using incremental sensors
Comparison of simulation results with actual measurements
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
483 Self-commutated converter circuits
CO3636-3B
1
484 USB adapter with Matlab toolbox for power electronics
CO3636-3D
1
485 Three-phase isolating transformer 300VA
CO3636-3E
1
Lucas Nülle GmbH
Page 83/205
www.lucas-nuelle.com
486 Three-phase asynchronous motor, 0.3kW n=1400 (230V/400V)
SE2673-1K
1
487 Incremental position encoder 1024 pulses
SE2663-3T
1
488 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
489 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
Media:
Pos.
Product name
Bestell-Nr.
Anz.
490 Interactive Lab Assistant: Frequency converter drives
SO2800-2L
1
491 Interactive Lab Assistant: Field-oriented control using MatlabSimulink
SO2800-2V
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
492 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
493 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
494 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
495 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Lucas Nülle GmbH
Page 84/205
www.lucas-nuelle.com
Measuring instruments:
Pos.
Product name
Bestell-Nr.
496 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
497 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
498 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
499 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
500 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
501 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
502 Protected power distribution for working stations
ST8008-8M
1
503 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
504 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
505 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
506 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
507 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 85/205
www.lucas-nuelle.com
EPE 52-3 Regulated permanent magnet servo drive with Matlab - Simulink 300W
EPE 52-3 Regulated permanent magnet servo drive with Matlab - Simulink 300W
Training objectives:
Setting up a hardware-in-the-loop system under real-time conditions
Modelling and designing cascade closed-loop control for a DC motor on an ongoing design level
Reducing the control system to discrete components to run on a digital signal processor
Creation and optimisation of automatic flow-rate and speed controllers
Park- and Clarke transformation
Integration of the space phasor modulation to optimize the control of the IGBT
Speed detection using incremental sensors
Comparison of simulation results with actual measurements
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
508 Self-commutated converter circuits
CO3636-3B
1
509 USB adapter with Matlab toolbox for power electronics
CO3636-3D
1
510 Synchronous servo motor 0.3kW
SE2672-3S
1
Lucas Nülle GmbH
Page 86/205
www.lucas-nuelle.com
511 Three-phase isolating transformer 300VA
CO3636-3E
1
512 Incremental position encoder 1024 pulses
SE2663-3T
1
513 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
514 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
Media:
Pos.
Product name
Bestell-Nr.
Anz.
515 Interactive Lab Assistant: Servo motors, electronically
commutated motors
SO2800-2M
1
516 Interactive Lab Assistant: Servo drives using Matlab-Simulink
SO2800-2W
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
517 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
518 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
519 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
520 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Lucas Nülle GmbH
Page 87/205
www.lucas-nuelle.com
Measuring instruments:
Pos.
Product name
Bestell-Nr.
521 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
522 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
523 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
524 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
525 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
526 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
527 Protected power distribution for working stations
ST8008-8M
1
528 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
529 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
530 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
531 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
532 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 88/205
www.lucas-nuelle.com
EPE 53-3 DC drives with cascade control using Matlab - Simulink 300W
EPE 53-3 DC drives with cascade control using Matlab - Simulink 300W
Training objectives:
Setting up a hardware-in-the-loop system under real-time conditions
Modelling and designing cascade closed-loop control for a DC motor on an ongoing design level
Reducing the control system to discrete components to run on a digital signal processor
Creation and optimisation of automatic flow-rate and speed controllers
Speed detection using incremental sensors
Comparison of simulation results with actual measurements
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
533 Self-commutated converter circuits
CO3636-3B
1
534 USB adapter with Matlab toolbox for power electronics
CO3636-3D
1
535 DC multi-circuit, compound wound machine, 0.3kW
SE2672-3D
1
536 Exciter for 0-200V regulating transformer
CO3212-5Q
1
Lucas Nülle GmbH
Page 89/205
www.lucas-nuelle.com
537 Three-phase isolating transformer 300VA
CO3636-3E
1
538 Incremental position encoder 1024 pulses
SE2663-3T
1
539 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
540 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
Media:
Pos.
Product name
Bestell-Nr.
Anz.
541 Interactive Lab Assistant: Inverter-fed drives with DC motors
SO2800-2K
1
542 Interactive Lab Assistant: DC drives using Matlab-Simulink
SO2800-2U
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
543 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
544 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
545 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
546 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Lucas Nülle GmbH
Page 90/205
www.lucas-nuelle.com
Measuring instruments:
Pos.
Product name
Bestell-Nr.
547 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
548 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
549 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
550 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
551 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
552 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
553 Protected power distribution for working stations
ST8008-8M
1
554 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
555 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
556 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
557 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
558 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 91/205
www.lucas-nuelle.com
ENT 5 Single-Phase and Three-Phase Transformers
ENT 5 Single-Phase and Three-Phase Transformers
Transformers come in all power classes and are used in both industrial applications and in the area of consumer
goods. They are used to transform voltages and currents.
This training system is based on a transformer with a power level of 100VA. The training system covers
investigations into single-phase and three-phase transformers. The following training content can be dealt with
using this system:
Isolation transformers and autotransformers
Design and connection
Equivalent circuit diagrams
Transformation ratios
No-load and short-circuit experiments
Vector groups used in three-phase transformers
Equipment set comprising the following:
Pos.
Product name
Bestell-Nr.
559 Transformer trainer
CO3636-7A
1
560 RLC load
CO3636-7B
1
Lucas Nülle GmbH
Page 92/205
Anz.
www.lucas-nuelle.com
561 Exciter for 0-200V regulating transformer
CO3212-5Q
1
Media:
Pos.
Product name
Bestell-Nr.
562 Interactive Lab Assistant: Single-phase and three-phase
transformers
Anz.
SO2800-1H
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
Anz.
563 Multi13S digital multimeter
LM2330
1
564 Digital/analog multimeter, wattmeter, power-factor incl. software
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
565 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
566 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
15
567 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
568 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
569 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
570 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
Lucas Nülle GmbH
Page 93/205
www.lucas-nuelle.com
571 Protection cover for three-level experiment trolleys
ST8010-9Y
1
572 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
573 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
574 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
Industrial drive technology 300W
Industrial drive technology 300W
Today's industrial world is no longer conceivable without controllable electrical drives. Their area of application
ranges from special high-power drives to vehicle powering, machine tooling and production machines and
includes automotive applications. In addition to the machines themselves, it is power electronics in conjunction
with automation, automatic control engineering and bus technology which are having such a great impact on the
drive's response and operating possibilities.
Unlike didactically-modified drives, this training equipment incorporates industrial components. Thus the system
focuses on the handling and operating (setting parameters) of real industrial equipment. Using the servo
drive/braking system the response of the drives can be investigated dynamically and statically and using
different working machines. The equipment is designed in the form of training panels.
Lucas Nülle GmbH
Page 94/205
www.lucas-nuelle.com
EDT 17-3 Smooth starting three-phase machines
EDT 17-3 Smooth starting three-phase machines
Training objectives:
Putting the system into operation
Setting the parameters of the run-up and run-down ramp functions and starting voltage
Investigating current and voltage during start-up
Start-up with different loads
Comparison to star-delta start-up
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
575 Smooth starter industrial type for 3-phase asynchronous
machines up to 1kW
CO3636-5Q
1
576 Three-phase asynchronous motor, 0.3kW n=1400 (230V/400V)
SE2673-1K
1
577 Cut-out switch, 4 pole
CO3212-1W
1
Lucas Nülle GmbH
Page 95/205
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
578 Interactive Lab Assistant: Industrial smooth starter, freq.converter
0.3/1 kW
Anz.
SO2800-1E
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
579 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
580 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
581 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
582 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
583 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
584 Digital/analog multimeter, wattmeter, power-factor incl. software
Lucas Nülle GmbH
Page 96/205
Anz.
CO5127-1Z
1
www.lucas-nuelle.com
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
585 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
586 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
587 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
588 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
589 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
590 Protected power distribution for working stations
ST8008-8M
1
591 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
592 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
593 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
594 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
595 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 97/205
www.lucas-nuelle.com
EDT 25-3 Frequency converter drives 300W
EDT 25-3 Frequency converter drives 300W
Experiment topics:
Putting the system into operation (computer-aided)
Programming basic functions:
Setting the setpoint, rotation direction, starting function, operating frequency, limiting values, nominal
voltage, nominal current, nominal frequency, power factor etc.
Investigating the operating response
Measuring the power and rms values
Load experiments
Recording the speed/torque characteristic in motor operation (1/3 quadrants)
Optimisation of the U/f characteristic
Compensation of the stator resistance
Field weakening control
Brake chopper operation
Lucas Nülle GmbH
Page 98/205
www.lucas-nuelle.com
Frequency converter Lenze 8400 1phase
Frequency converter Lenze 8400 1phase
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
596 Frequency converter 0.75kW (Lenze 8400)
CO3636-5G
1
597 Brake resistor 0.2kW for frequency converters
CO3636-5V
1
598 Three-phase asynchronous motor, 0.3kW n=1400 (230V/400V)
SE2673-1K
1
Optional Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
599 USB diagnostic adapter for Lenze 8400 frequency converter
LM8929
1
600 PROFIBUS DP interface module for frequency converter Lenze
8400
LM8932
1
Lucas Nülle GmbH
Page 99/205
www.lucas-nuelle.com
601 PROFINET interface module for frequency converter Lenze 8400
LM8937
1
Media:
Pos.
Product name
Bestell-Nr.
Anz.
602 QuickChart set, 8400 single-phase frequency converters (2 charts, SO6200-7F
GB)
1
603 Interactive Lab Assistant: Industrial smooth starter, freq.converter
0.3/1 kW
1
SO2800-1E
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
604 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
605 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
606 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
607 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
608 Universal power supply for electrical machines
Lucas Nülle GmbH
Page 100/205
Anz.
CO3212-5U
1
www.lucas-nuelle.com
Measuring instruments:
Pos.
Product name
Bestell-Nr.
609 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
610 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
611 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
612 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
613 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
614 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
615 Protected power distribution for working stations
ST8008-8M
1
616 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
617 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
618 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
619 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
620 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 101/205
www.lucas-nuelle.com
Frequency converter Lenze 8400 3phase
Frequency converter Lenze 8400 3phase
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
621 Frequency converter, industrial type 0.75kW 3-phase (Lenze 8400)
CO3636-5J
1
622 Brake resistor 0.2kW for frequency converters, 3-phase
CO3636-5X
1
623 Three-phase asynchronous motor, 0.3kW n=1400 (230V/400V)
SE2673-1K
1
Optional Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
624 USB diagnostic adapter for Lenze 8400 frequency converter
LM8929
1
625 PROFIBUS DP interface module for frequency converter Lenze
8400
LM8932
1
Lucas Nülle GmbH
Page 102/205
www.lucas-nuelle.com
626 PROFINET interface module for frequency converter Lenze 8400
LM8937
1
Media:
Pos.
Product name
Bestell-Nr.
Anz.
627 QuickChart set, 8400 three-phase frequency converters (2 charts,
GB)
SO6200-7G
1
628 Interactive Lab Assistant: Industrial smooth starter, freq.converter
0.3/1 kW
SO2800-1E
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
629 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
630 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
631 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
632 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
633 Universal power supply for electrical machines
Lucas Nülle GmbH
Page 103/205
Anz.
CO3212-5U
1
www.lucas-nuelle.com
Measuring instruments:
Pos.
Product name
Bestell-Nr.
634 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
635 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
636 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
637 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
638 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
639 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
640 Protected power distribution for working stations
ST8008-8M
1
641 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
642 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
643 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
644 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
645 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 104/205
www.lucas-nuelle.com
EDT 33-3 Positioning with linear axis 300W
EDT 33-3 Positioning with linear axis 300W
Training objectives:
Computer-aided commissioning and parameterisation of a positioning drive with linear axis
Positioning and sequence control
Setting parameters using special training software
Referential travel function
Investigating the effects of various controller settings
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
646 Linear unit 800/12
SE2673-3U
Anz.
1
Software:
Pos.
Product name
Bestell-Nr.
647 Software PosiDrive for servo machine test stand V1.0 (D,GB)
Lucas Nülle GmbH
Page 105/205
SO6001-2S
Anz.
1
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
648 Manual EDT33 Positioning
Anz.
SH5002-3S
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
649 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
650 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
651 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
652 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
653 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
654 Digital/analog multimeter, wattmeter, power-factor incl. software
Lucas Nülle GmbH
Page 106/205
Anz.
CO5127-1Z
1
www.lucas-nuelle.com
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
655 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
656 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
657 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
658 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
659 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
660 Protected power distribution for working stations
ST8008-8M
1
661 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
662 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
663 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
664 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
665 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 107/205
www.lucas-nuelle.com
EDT 51 Motor management relays
EDT 51 Motor management relays
Training objectives:
Configuration and operation (computer based)
Programming of basic functions:
direct starter motors, star-delta starting, motor protection, overload limits, switch-off behaviour
Investigation of operating response
Measurement of power and RMS values
Load experiments
Determination of operating points
Measurement of dynamic processes during start-up
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
666 Motor management relay with parameter setting software
CO3636-6C
1
667 Three-phase asynchronous motor, squirrel-cage, 0.3 kW
SE2672-3G
1
Lucas Nülle GmbH
Page 108/205
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
Anz.
668 Manual EDT51, Controlling motors with motor management relays
SH5002-3R
1
669 QuickChart set, Engine management relays (GB)
SO6200-7C
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
670 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
671 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
672 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
673 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
674 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
675 Digital/analog multimeter, wattmeter, power-factor incl. software
Lucas Nülle GmbH
Page 109/205
Anz.
CO5127-1Z
1
www.lucas-nuelle.com
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
676 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
677 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
678 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
679 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
680 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
681 Protected power distribution for working stations
ST8008-8M
1
682 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
683 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
684 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
685 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
686 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 110/205
www.lucas-nuelle.com
EEM Electrical machines 1kW
EEM Electrical machines 1kW
Electrical machines convert electrical energy into mechanical energy or vice versa. A fundamental distinction
can be drawn between DC, AC and three-phase machines.
The machines used for training in electrical engineering are designed so that nearly all of the circuitry and drives
found in industry, commerce and at home can be conveyed in a didactic fashion in hands-on training. Using the
servo drive and braking system it is possible to easily determine all of the relevant data for electrical machines.
Lucas Nülle GmbH
Page 111/205
www.lucas-nuelle.com
EEM 2-1 DC machines 1kW
EEM 2-1 DC machines 1kW
In spite of their declining use for industrial purposes DC machines constitute the basis for learning about
electrical machines. They demonstrate in a straight-forward manner the various possibilities of open- and closedloop control of machines.
The following training objectives are dealt with for shunt-wound, series-wound and compound-wound machines:
Motor operation:
Motor connection
Comparison of shunt-wound, series-wound and compound-wound machines
Typical machine data
Open-loop speed control with starter and field regulator
Reversing the rotation direction
Load characteristics at constant input voltage
Measurement evaluations
Generator operation:
Generator connection
Armature voltage as a function of the exciter current
Function and application of the field regulator
Voltage control, self-excitation and separate excitation
Armature current and armature voltage at constant
speed and constant exciter current
Load diagram of the generator
Lucas Nülle GmbH
Page 112/205
www.lucas-nuelle.com
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
687 DC multi-circuit, compound wound machine, 1kW
SE2662-5D
1
688 Starter for DC machines, 1kW
CO3213-6B
1
689 Field regulator for generators, 1kW
CO3213-6H
1
690 Load resistance for DC generators, 1kW
SE2662-6J
1
691 Digital/analog multimeter, wattmeter, power-factor incl. software
CO5127-1Z
1
Media:
Pos.
Product name
Bestell-Nr.
692 Interactive Lab Assistant: DC machines 0.3/1 kW
Anz.
SO2800-1A
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
693 Servo machine test bench for 1kW machines incl. ActiveServo
software(D,GB,F,E)
CO3636-6W
1
694 Rubber coupling sleeve, 1kW
SE2662-6A
1
695 Coupling guard, 1kW
SE2662-6B
1
Lucas Nülle GmbH
Page 113/205
www.lucas-nuelle.com
696 Shaft end guard, 1kW
SE2662-6C
1
697 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
698 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
699 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
700 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
701 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
702 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
703 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
704 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
705 Protected power distribution for working stations
ST8008-8M
1
Lucas Nülle GmbH
Page 114/205
www.lucas-nuelle.com
706 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
707 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
708 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
709 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
710 Protection cover for three-level experiment trolleys
ST8010-9Y
1
EEM 3-1 AC machines 1kW
Lucas Nülle GmbH
Page 115/205
www.lucas-nuelle.com
EEM 3-1 AC machines 1kW
AC machines can be found with power levels of up to several kW. Their main area of use is in operating mobile
loads. AC machines span every area of daily life starting with your electric razor, all the way to washing
machines.
The training objectives are:
Motor connection
Reversing rotation direction
Typical characteristics
Load and run-up characteristics
Measurement evaluations
EEM 3.1-1 Universal motor 1kW
EEM 3.1-1 Universal motor 1kW
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
711 Universal motor, 1kW
SE2662-5E
1
712 Cut-out switch, 4 pole
CO3212-1W
1
Lucas Nülle GmbH
Page 116/205
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
713 Interactive Lab Assistant: AC machines 0.3/1 kW
Anz.
SO2800-1B
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
714 Servo machine test bench for 1kW machines incl. ActiveServo
software(D,GB,F,E)
CO3636-6W
1
715 Rubber coupling sleeve, 1kW
SE2662-6A
1
716 Coupling guard, 1kW
SE2662-6B
1
717 Shaft end guard, 1kW
SE2662-6C
1
718 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
719 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Lucas Nülle GmbH
Page 117/205
www.lucas-nuelle.com
Pos.
Product name
Bestell-Nr.
720 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
721 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
722 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
723 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
724 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
725 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
726 Protected power distribution for working stations
ST8008-8M
1
727 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
728 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
729 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
730 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
731 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 118/205
www.lucas-nuelle.com
EEM 3.3-1 Single-phase induction motor with bifilar starting winding 1kW
EEM 3.3-1 Single-phase induction motor with bifilar starting winding 1kW
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
732 AC-motor with bifilar winding, 1kW
SE2672-5N
1
733 Cut-out switch, 4 pole
CO3212-1W
1
Media:
Pos.
Product name
Bestell-Nr.
734 Interactive Lab Assistant: AC machines 0.3/1 kW
Lucas Nülle GmbH
Page 119/205
SO2800-1B
Anz.
1
www.lucas-nuelle.com
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
735 Servo machine test bench for 1kW machines incl. ActiveServo
software(D,GB,F,E)
CO3636-6W
1
736 Rubber coupling sleeve, 1kW
SE2662-6A
1
737 Coupling guard, 1kW
SE2662-6B
1
738 Shaft end guard, 1kW
SE2662-6C
1
739 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
740 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
741 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
742 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
Lucas Nülle GmbH
Page 120/205
Anz.
SO5126-3R
20
www.lucas-nuelle.com
743 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
744 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
745 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
746 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
747 Protected power distribution for working stations
ST8008-8M
1
748 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
749 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
750 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
751 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
752 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 121/205
www.lucas-nuelle.com
EEM 3.4-1 Single-phase induction motor with operating and auxiliary capacitor 1kW
EEM 3.4-1 Single-phase induction motor with operating and auxiliary capacitor 1kW
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
753 AC-motor with starting & operating capacitor, 1kW
SE2672-5P
1
754 Cut-out switch, 4 pole
CO3212-1W
1
Media:
Pos.
Product name
Bestell-Nr.
755 Interactive Lab Assistant: AC machines 0.3/1 kW
Lucas Nülle GmbH
Page 122/205
SO2800-1B
Anz.
1
www.lucas-nuelle.com
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
756 Servo machine test bench for 1kW machines incl. ActiveServo
software(D,GB,F,E)
CO3636-6W
1
757 Rubber coupling sleeve, 1kW
SE2662-6A
1
758 Coupling guard, 1kW
SE2662-6B
1
759 Shaft end guard, 1kW
SE2662-6C
1
760 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
761 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
762 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
763 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
Lucas Nülle GmbH
Page 123/205
Anz.
SO5126-3R
20
www.lucas-nuelle.com
764 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
765 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
766 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
767 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
768 Protected power distribution for working stations
ST8008-8M
1
769 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
770 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
771 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
772 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
773 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 124/205
www.lucas-nuelle.com
EEM 4-1 Asynchronous machines 1kW
EEM 4-1 Asynchronous machines 1kW
Asynchronous machines can be found with power levels ranging up into the MW range. Due to their simple
design asynchronous squirrel-cage machines are particularly widespread.
The training objectives are:
Motor connection
Reversing rotation direction
Manual switching
Machine-specific values and characteristics
Measurement evaluation
Lucas Nülle GmbH
Page 125/205
www.lucas-nuelle.com
EEM 4.1-1 Three-phase induction motor with squirrel cage and distinct pull-out torque 1kW
EEM 4.1-1 Three-phase induction motor with squirrel cage and distinct pull-out torque 1kW
Additional training objectives:
Star-delta connection
Steinmetz circuit
Reactance power compensation with capacitors of various capacitance
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
774 Three-phase asynchronous motor, squirrel-cage, 1kW
SE2672-5G
1
775 Star-Delta switch
CO3212-2D
1
776 Cut-out switch, 4 pole
CO3212-1W
1
777 Capacitive load, three-phase, 14-stage,
CO3212-6X
1
Lucas Nülle GmbH
Page 126/205
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
778 Interactive Lab Assistant: Asynchronous machines 0.3/1kW
Anz.
SO2800-1C
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
779 Servo machine test bench for 1kW machines incl. ActiveServo
software(D,GB,F,E)
CO3636-6W
1
780 Rubber coupling sleeve, 1kW
SE2662-6A
1
781 Coupling guard, 1kW
SE2662-6B
1
782 Shaft end guard, 1kW
SE2662-6C
1
783 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
784 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Lucas Nülle GmbH
Page 127/205
www.lucas-nuelle.com
Pos.
Product name
Bestell-Nr.
785 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
786 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
787 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
788 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
789 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
790 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
791 Protected power distribution for working stations
ST8008-8M
1
792 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
793 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
794 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
795 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
796 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 128/205
www.lucas-nuelle.com
EEM 4.2-1 Three-phase induction motor with squirrel-cage, pole-changing according to Dahlander
1kW
EEM 4.2-1 Three-phase induction motor with squirrel-cage, pole-changing according to Dahlander
1kW
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
797 Three-phase asynchronous machine, Dahlander, 1kW
SE2672-5K
1
798 Pole reverser Dahlander
CO3212-2H
1
Media:
Pos.
Product name
Bestell-Nr.
799 Interactive Lab Assistant: Asynchronous machines 0.3/1kW
Lucas Nülle GmbH
Page 129/205
Anz.
SO2800-1C
1
www.lucas-nuelle.com
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
800 Servo machine test bench for 1kW machines incl. ActiveServo
software(D,GB,F,E)
CO3636-6W
1
801 Rubber coupling sleeve, 1kW
SE2662-6A
1
802 Coupling guard, 1kW
SE2662-6B
1
803 Shaft end guard, 1kW
SE2662-6C
1
804 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
805 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
806 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
807 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
Lucas Nülle GmbH
Page 130/205
Anz.
SO5126-3R
20
www.lucas-nuelle.com
808 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
809 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
810 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
811 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
812 Protected power distribution for working stations
ST8008-8M
1
813 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
814 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
815 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
816 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
817 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 131/205
www.lucas-nuelle.com
EEM 4.3-1 Three-phase induction motor with squirrel cage, pole-changing with 2 separate windings
1kW
EEM 4.3-1 Three-phase induction motor with squirrel cage, pole-changing with 2 separate windings
1kW
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
818 Three-phase asynchronous machine, two separate windings, 1kW
SE2672-5L
1
819 Pole reverser for 2separate windings
CO3212-2K
1
Media:
Pos.
Product name
Bestell-Nr.
820 Interactive Lab Assistant: Asynchronous machines 0.3/1kW
Lucas Nülle GmbH
Page 132/205
Anz.
SO2800-1C
1
www.lucas-nuelle.com
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
821 Servo machine test bench for 1kW machines incl. ActiveServo
software(D,GB,F,E)
CO3636-6W
1
822 Rubber coupling sleeve, 1kW
SE2662-6A
1
823 Coupling guard, 1kW
SE2662-6B
1
824 Shaft end guard, 1kW
SE2662-6C
1
825 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
826 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
827 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
828 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
Lucas Nülle GmbH
Page 133/205
Anz.
SO5126-3R
20
www.lucas-nuelle.com
829 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
830 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
831 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
832 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
833 Protected power distribution for working stations
ST8008-8M
1
834 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
835 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
836 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
837 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
838 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 134/205
www.lucas-nuelle.com
EEM 4.4-1 Three-phase motor with slip-rings (slip-ring rotor) 1kW
EEM 4.4-1 Three-phase motor with slip-rings (slip-ring rotor) 1kW
Additional training objectives:
Starting
Speed control
Voltage, current and frequency in the rotor
Rotor frequency and speed
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
839 Three-phase multi-function machine, 1.0kW
SE2662-6W
1
840 Starter for slip-ring motors, 1kW
CO3212-6D
1
841 Cut-out switch, 4 pole
CO3212-1W
1
Lucas Nülle GmbH
Page 135/205
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
842 Interactive Lab Ass.: Slip-ring rotors,sync. machines,
synchronisation 0.3/1 kW
Anz.
SO2800-1D
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
843 Servo machine test bench for 1kW machines incl. ActiveServo
software(D,GB,F,E)
CO3636-6W
1
844 Rubber coupling sleeve, 1kW
SE2662-6A
1
845 Coupling guard, 1kW
SE2662-6B
1
846 Shaft end guard, 1kW
SE2662-6C
1
847 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
848 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Lucas Nülle GmbH
Page 136/205
www.lucas-nuelle.com
Pos.
Product name
Bestell-Nr.
849 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
850 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
851 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
852 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
853 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
854 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
855 Protected power distribution for working stations
ST8008-8M
1
856 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
857 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
858 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
859 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
860 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 137/205
www.lucas-nuelle.com
EEM 4.5-1 Fault simulation on electrical machines 1kW
EEM 4.5-1 Fault simulation on electrical machines 1kW
Fault simulation performed by measuring winding and insulation resistances. All measurements are performed in
the no-voltage state. The following faults can be simulated:
Winding breaks in the coils
Insulation faults winding to winding
Insulation faults winding to frame
Combinations of different faults
Fault monitoring and repair instructions
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
861 Fault simulator forthree-phase asynchronous squirrel-cage motor
SE2662-9D
1
862 Three-phase asynchronous motor, squirrel-cage, 1kW
SE2672-5G
1
863 Insulation tester "Insu 10"
LM2333
1
Media:
Lucas Nülle GmbH
Page 138/205
www.lucas-nuelle.com
Pos.
Product name
Bestell-Nr.
864 Manual EEM/F, Troubleshooting on electrical machines
Anz.
SH5002-3P
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
865 Servo machine test bench for 1kW machines incl. ActiveServo
software(D,GB,F,E)
CO3636-6W
1
866 Rubber coupling sleeve, 1kW
SE2662-6A
1
867 Coupling guard, 1kW
SE2662-6B
1
868 Shaft end guard, 1kW
SE2662-6C
1
869 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
870 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
871 Digital/analog multimeter, wattmeter, power-factor incl. software
Lucas Nülle GmbH
Page 139/205
Anz.
CO5127-1Z
1
www.lucas-nuelle.com
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
872 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
873 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
874 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
875 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
876 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
877 Protected power distribution for working stations
ST8008-8M
1
878 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
879 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
880 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
881 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
882 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 140/205
www.lucas-nuelle.com
EEM 4.6-1 Protection for electrical machines 1kW
EEM 4.6-1 Protection for electrical machines 1kW
Squirrel cage motors are designed for operation with constant loading. Any change in load, or high currents
when starting up, may cause the nominal operating temperature to be exceeded. This training system conveys
how some of the most important protection circuits work.
Selection, installation and configuration of various motor protection systems
Motor protection switches
Motor protection relays
Thermistor protection
Effect of various operating systems on the heat of the motor
Triggering characteristics for protection systems
Protection from impermissible loading
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
883 Board for motor protection systems 1kW
CO3213-7Y
1
884 Three-phase motor with different temperature sensors 1kW
SE2672-5Y
1
885 Multi 18 digital multimeter
LM2331
1
Lucas Nülle GmbH
Page 141/205
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
886 Manual EEM 4.6, Protection for electrical machines with servobrake
Anz.
SH5002-1U
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
887 Servo machine test bench for 1kW machines incl. ActiveServo
software(D,GB,F,E)
CO3636-6W
1
888 Rubber coupling sleeve, 1kW
SE2662-6A
1
889 Coupling guard, 1kW
SE2662-6B
1
890 Shaft end guard, 1kW
SE2662-6C
1
891 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
892 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Lucas Nülle GmbH
Page 142/205
www.lucas-nuelle.com
Pos.
Product name
Bestell-Nr.
893 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
894 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
895 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
896 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
897 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
898 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
899 Protected power distribution for working stations
ST8008-8M
1
900 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
901 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
902 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
903 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
904 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 143/205
www.lucas-nuelle.com
EEM 5-1 Synchronous machines and mains synchronisation; reluctance machines 1kW
EEM 5-1 Synchronous machines and mains synchronisation; reluctance machines 1kW
Synchronous machines are primarily used as generators in power generation and as highly dynamic drives
(servos).
Lucas Nülle GmbH
Page 144/205
www.lucas-nuelle.com
EEM 5.1-1 Synchronous machines 1kW
EEM 5.1-1 Synchronous machines 1kW
Training objectives:
Motor operation:
Motor connection Starting
Reversing rotation direction
Excitation and load angle
Synchronous compensator operation
Power factor and exciter current
Load characteristics in motor operation
V characteristics
Stability limits
Under- and over excitation
Measurement evaluation
Generator operation:
Generator connection
Voltage setting via the exciter current
Load characteristics in generator operation
Measurement evaluation
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
905 Three-phase multi-function machine, 1.0kW
SE2662-6W
1
906 Load resistance for synchronous generators, 1kW
SE2662-6K
1
Lucas Nülle GmbH
Page 145/205
www.lucas-nuelle.com
907 Cut-out switch, 4 pole
CO3212-1W
1
908 Digital/analog multimeter, wattmeter, power-factor incl. software
CO5127-1Z
1
Power supply:
Pos.
Product name
Bestell-Nr.
909 Exciter for 0-200V regulating transformer
Anz.
CO3212-5Q
1
Media:
Pos.
Product name
Bestell-Nr.
910 Interactive Lab Ass.: Slip-ring rotors,sync. machines,
synchronisation 0.3/1 kW
Anz.
SO2800-1D
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
911 Servo machine test bench for 1kW machines incl. ActiveServo
software(D,GB,F,E)
CO3636-6W
1
912 Rubber coupling sleeve, 1kW
SE2662-6A
1
913 Coupling guard, 1kW
SE2662-6B
1
914 Shaft end guard, 1kW
SE2662-6C
1
915 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Lucas Nülle GmbH
Page 146/205
www.lucas-nuelle.com
Power supply:
Pos.
Product name
Bestell-Nr.
916 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
917 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
918 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
919 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
920 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
921 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
922 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
923 Protected power distribution for working stations
ST8008-8M
1
924 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
925 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
Lucas Nülle GmbH
Page 147/205
www.lucas-nuelle.com
926 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
927 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
928 Protection cover for three-level experiment trolleys
ST8010-9Y
1
EEM 5.2-1 Mains synchronisation 1kW
EEM 5.2-1 Mains synchronisation 1kW
Training objectives:
Design and connection of the synchronising circuit
Comparison of bright, dark and three-lamp synchronising circuit
Mains synchronisation with double frequency meter, double voltage meter, synchronoscope and zerovoltage meter
Supplementary equipment set to synchronous machine, consisting of:
Pos.
Product name
Bestell-Nr.
929 Synchronization Unit
CO3212-6V
1
930 Motor protection switch, 3 pole, 1.8-2.5A
CO3212-1P
1
Lucas Nülle GmbH
Page 148/205
Anz.
www.lucas-nuelle.com
Accessories:
Pos.
Product name
931 Set of safety measurement cables, 4mm (31 leads)
Bestell-Nr.
Anz.
SO5148-1L
1
Bestell-Nr.
Anz.
Media:
Pos.
Product name
932 Interactive Lab Ass.: Slip-ring rotors,sync. machines,
synchronisation 0.3/1 kW
SO2800-1D
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
933 Servo machine test bench for 1kW machines incl. ActiveServo
software(D,GB,F,E)
CO3636-6W
1
934 Rubber coupling sleeve, 1kW
SE2662-6A
1
935 Coupling guard, 1kW
SE2662-6B
1
936 Shaft end guard, 1kW
SE2662-6C
1
937 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Lucas Nülle GmbH
Page 149/205
www.lucas-nuelle.com
Pos.
Product name
Bestell-Nr.
938 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
939 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
940 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
941 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
942 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
943 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
944 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
945 Protected power distribution for working stations
ST8008-8M
1
946 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
947 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
948 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
949 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
Lucas Nülle GmbH
Page 150/205
www.lucas-nuelle.com
950 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Bestell-Nr.
Anz.
EEM 5.3-1 Three-phase reluctance machine 1kW
EEM 5.3-1 Three-phase reluctance machine 1kW
Experiment topics:
Machine connection
Starting Reversing rotation direction
Load characteristics
Measurement evaluation
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
951 Reluctance motor, 1kW
SE2662-5V
1
952 Cut-out switch, 4 pole
CO3212-1W
1
Lucas Nülle GmbH
Page 151/205
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
953 Interactive Lab Ass.: Slip-ring rotors,sync. machines,
synchronisation 0.3/1 kW
Anz.
SO2800-1D
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
954 Servo machine test bench for 1kW machines incl. ActiveServo
software(D,GB,F,E)
CO3636-6W
1
955 Rubber coupling sleeve, 1kW
SE2662-6A
1
956 Coupling guard, 1kW
SE2662-6B
1
957 Shaft end guard, 1kW
SE2662-6C
1
958 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
959 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Lucas Nülle GmbH
Page 152/205
www.lucas-nuelle.com
Pos.
Product name
Bestell-Nr.
960 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
961 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
962 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
963 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
964 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
965 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
966 Protected power distribution for working stations
ST8008-8M
1
967 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
968 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
969 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
970 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
971 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 153/205
www.lucas-nuelle.com
Power electronics and didactically-optimized drives 1kW
Power electronics and didactically-optimized drives 1kW
Power electronics is the technology of switching and converting high levels of electrical power. Today this is
done using semiconductor components like diodes, thyristors and IGBTs. The main area of application for power
electronics is drive technology. The modular training system accompanies you on your journey from static
converter technology to closed-loop control drives and offers you the possibility of dealing in detail with the
topics most relevant to you. The modular system with training panels and the systematic software support
allows for continuous upgrading, supplements or technology-prompted extensions.
Converters
Lucas Nülle GmbH
Page 154/205
www.lucas-nuelle.com
Converters
EPE 30-1 Line commutated converter circuits 1kW
EPE 30-1 Line commutated converter circuits 1kW
Training objectives:
Fundamentals of the diode, thyristor, triac
Rectification
Control principles: phase-control, full-wave control, burst firing control, pulse pattern control, rectifier
operation, inverter operation
Circuits: M1, M2, M3, B2, B6, M1C, M2C, M3C, B2C, B6C, B2HA, B2HK, B2HZ, B6C, B6HA, B6HK,
W1C, W3C
Resistive and inductive loads
Control characteristics and operating graphs
Suppressor circuit
Computer-assisted data acquisition
Frequency analysis and examination of harmonics
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
972 Line-commutated power converters circuits
Lucas Nülle GmbH
Page 155/205
Anz.
CO3636-3A
1
www.lucas-nuelle.com
973 Three-phase isolating transformer 1300VA
CO3636-3G
1
974 Power electronics load set, 1kW
CO3636-3J
1
Media:
Pos.
Product name
Bestell-Nr.
975 Interactive Lab Assistant: Line-commutated power converter
circuits 1kW
Anz.
SO2800-2C
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
976 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
977 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
978 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
979 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
980 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
981 Protected power distribution for working stations
ST8008-8M
1
982 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
983 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
Lucas Nülle GmbH
Page 156/205
www.lucas-nuelle.com
984 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
985 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
986 Protection cover for three-level experiment trolleys
ST8010-9Y
1
EPE 40-1 Self-commutated converter circuits 1kW
EPE 40-1 Self-commutated converter circuits 1kW
Experiment topics:
Fundamentals: IGBT
Control principles: pulse-width modulation, DC chopper controller in 1-, 2- and 4-quadrant operation
Modulation of low-frequency AC voltage with pulse-width modulation
Circuits: step-down controller, H-bridge, inverter
Resistive and inductive loads
Suppressor circuit, link circuit, free-wheeling
Control characteristics and operating graphs
Clock frequency, ripple
Computer-assisted measurement technology,
Frequency analysis and examination of harmonics
Lucas Nülle GmbH
Page 157/205
www.lucas-nuelle.com
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
987 Self-commutated converter circuits
CO3636-3B
1
988 Three-phase isolating transformer 1300VA
CO3636-3G
1
989 Power electronics load set, 1kW
CO3636-3J
1
Media:
Pos.
Product name
Bestell-Nr.
990 Interactive Lab Assistant: Self-commutated converter circuits
1kW
Anz.
SO2800-2D
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
991 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
992 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
993 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
994 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
995 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
Lucas Nülle GmbH
Page 158/205
www.lucas-nuelle.com
996 Protected power distribution for working stations
ST8008-8M
1
997 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
998 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
999 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
1000 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
1001 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Drives
Drives
Lucas Nülle GmbH
Page 159/205
www.lucas-nuelle.com
EPE 31-1 Converter drives with DC motors 1kW
EPE 31-1 Converter drives with DC motors 1kW
Training objectives:
Closed-loop speed control in 1- to 4-quadrant operation with and without cascade current control
Open-loop speed control with one-way converter
Open-loop control with two-way converter
Four-quadrant operation, energy feedback
Closed-loop speed control, current control, cascade control, adaptive control
Computer-assisted controlled-system and controller analysis, setting parameters
P-, PI- control
Optimisation of the controller
Supplementary set to EPE 30-1 line-commutated converters, consisting of:
Supplementary set to EPE 30-1 line-commutated converters, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
1002 DC multi-circuit, compound wound machine, 1kW
SE2662-5D
1
1003 Exciter for 0-200V regulating transformer
CO3212-5Q
1
Lucas Nülle GmbH
Page 160/205
www.lucas-nuelle.com
1004 Tachogenerator 1 V/1000 rpm, 1 kW
SE2672-5U
1
1005 Coupling guard, 1kW
SE2662-6B
1
1006 Rubber coupling sleeve, 1kW
SE2662-6A
1
Media:
Pos.
Product name
Bestell-Nr.
1007 Interactive Lab Assistant: Converter drives with DC motors
Anz.
SO2800-2B
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
1008 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
1009 Servo machine test bench for 1kW machines incl. ActiveServo
software(D,GB,F,E)
CO3636-6W
1
1010 Rubber coupling sleeve, 1kW
SE2662-6A
1
1011 Coupling guard, 1kW
SE2662-6B
1
1012 Shaft end guard, 1kW
SE2662-6C
1
Lucas Nülle GmbH
Page 161/205
www.lucas-nuelle.com
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
1013 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
1014 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
1015 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
1016 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
1017 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
1018 Protected power distribution for working stations
ST8008-8M
1
1019 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
1020 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
1021 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
1022 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
1023 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 162/205
www.lucas-nuelle.com
EPE 41-1 Frequency converter drives with three-phase asynchronous motor 1kW
EPE 41-1 Frequency converter drives with three-phase asynchronous motor 1kW
Training objectives:
Investigation of inverters with voltage and frequency control
Investigation of inverters with space vector modulation
Analysis of the voltage and frequency ratios
Stator resistance compensation
Investigation of the inverter drive
Computer-assisted setting of parameters and animation
Supplementary equipment set for EPE 40-1 - Self-commutated converters, consisting of the
following:
Pos.
Product name
Bestell-Nr.
1024 Three-phase asynchronous motor, 1kW n=1400 (230V/400V)
SE2673-1H
Anz.
1
Media:
Lucas Nülle GmbH
Page 163/205
www.lucas-nuelle.com
Pos.
Product name
1025 Interactive Lab Assistant: Frequency converter drives
Bestell-Nr.
Anz.
SO2800-2L
1
Bestell-Nr.
Anz.
Measuring instruments:
Pos.
Product name
1026 Digital/analog multimeter, wattmeter, power-factor incl. software
CO5127-1Z
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
1027 Servo machine test bench for 1kW machines incl. ActiveServo
software(D,GB,F,E)
CO3636-6W
1
1028 Rubber coupling sleeve, 1kW
SE2662-6A
1
1029 Coupling guard, 1kW
SE2662-6B
1
1030 Shaft end guard, 1kW
SE2662-6C
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
1031 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
1032 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
1033 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
1034 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
Lucas Nülle GmbH
Page 164/205
www.lucas-nuelle.com
1035 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
1036 Protected power distribution for working stations
ST8008-8M
1
1037 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
1038 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
1039 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
1040 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
1041 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 165/205
www.lucas-nuelle.com
EPE 42-1 Servo drive, electronically commutated motor 1kW
EPE 42-1 Servo drive, electronically commutated motor 1kW
Training objectives:
Operating principle of servo motors with electronic commutation or brushless DC motors
Analysis of field-oriented space-vector modulation
Investigation of coordinate and sensor systems
Computer-assisted setting of parameters and animation
Supplementary equipment set for EPE 40-1 - Self-commutated converters, consisting of the
following:
Pos.
Product name
Bestell-Nr.
Anz.
1042 Synchron Servomotor 1kW
SE2672-5S
1
1043 Incremental position encoder 1024 pulses, 1kW
SE2663-5T
1
1044 Coupling guard, 1kW
SE2662-6B
1
1045 Rubber coupling sleeve, 1kW
SE2662-6A
1
Lucas Nülle GmbH
Page 166/205
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
1046 Interactive Lab Assistant: Servo motors, electronically
commutated motors
Anz.
SO2800-2M
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
1047 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
1048 Servo machine test bench for 1kW machines incl. ActiveServo
software(D,GB,F,E)
CO3636-6W
1
1049 Rubber coupling sleeve, 1kW
SE2662-6A
1
1050 Coupling guard, 1kW
SE2662-6B
1
1051 Shaft end guard, 1kW
SE2662-6C
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
1052 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
1053 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
Lucas Nülle GmbH
Page 167/205
www.lucas-nuelle.com
1054 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
1055 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
1056 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
1057 Protected power distribution for working stations
ST8008-8M
1
1058 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
1059 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
1060 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
1061 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
1062 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 168/205
www.lucas-nuelle.com
EPE 43-1 Converter drives with DC motor 1kW
EPE 43-1 Converter drives with DC motor 1kW
Training objectives:
Closed-loop speed control in the 1 and 4 quadrant operation with and without cascade current control
Open-loop speed control in 1-quadrant operation with IGBT
Open-loop speed control in 4-quadrant operation with IGBT
Closed-loop speed control, closed-loop current control, cascade control
Computer-assisted controlled-system and controller analysis, setting parameter
P-, PI- control
Controller optimisation
Supplementary equipment set for EPE 40-1 - Self-commutated converters, consisting of the
following:
Pos.
Product name
Bestell-Nr.
Anz.
1063 DC multi-circuit, compound wound machine, 1kW
SE2662-5D
1
1064 Tachogenerator 1 V/1000 rpm, 1 kW
SE2672-5U
1
1065 Coupling guard, 1kW
SE2662-6B
1
Lucas Nülle GmbH
Page 169/205
www.lucas-nuelle.com
1066 Rubber coupling sleeve, 1kW
SE2662-6A
1
Media:
Pos.
Product name
Bestell-Nr.
1067 Interactive Lab Assistant: Inverter-fed drives with DC motors
Anz.
SO2800-2K
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
1068 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
1069 Servo machine test bench for 1kW machines incl. ActiveServo
software(D,GB,F,E)
CO3636-6W
1
1070 Rubber coupling sleeve, 1kW
SE2662-6A
1
1071 Coupling guard, 1kW
SE2662-6B
1
1072 Shaft end guard, 1kW
SE2662-6C
1
Accessories:
Pos.
Product name
1073 Set of safety measurement cables, 4mm (31 leads)
Lucas Nülle GmbH
Page 170/205
Bestell-Nr.
Anz.
SO5148-1L
1
www.lucas-nuelle.com
1074 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
1075 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
1076 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
1077 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
1078 Protected power distribution for working stations
ST8008-8M
1
1079 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
1080 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
1081 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
1082 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
1083 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 171/205
www.lucas-nuelle.com
Designing drive controllers with Matlab - Simulink 1kW
Designing drive controllers with Matlab - Simulink 1kW
Matlab enables rapid prototyping of embedded open-loop and closed-loop control systems. System designs can
first be investigated using a PC simulation. Then the next step is to apply the design to real hardware and test
it. This kind of simulation-based learning is motivating and interesting to students.
It enables drive systems, which are capable of operating in real time, to be programmed and tested using the
model-based design methods used in industry.
Training objectives:
Rapid implementation of user-defined and reconfigurable processor/hardware-in-the-loop systems using
automatic generation of code
Algorithm engineering to bridge the gap between theory and practice
Lucas Nülle GmbH
Page 172/205
www.lucas-nuelle.com
EPE 51-1 Field-oriented control of asynchronous machine with Matlab - Simulink 1kW
EPE 51-1 Field-oriented control of asynchronous machine with Matlab - Simulink 1kW
Training objectives:
Setting up a hardware-in-the-loop system under real-time conditions
Modelling and designing cascade closed-loop control for a DC motor on an ongoing design level
Reducing the control system to discrete components to run on a digital signal processor
Creation and optimisation of automatic flow-rate and speed controllers
Park- and Clarke transformation
Integration of the space phasor modulation to optimize the control of the IGBT
Speed detection using incremental sensors
Comparison of simulation results with actual measurements
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
1084 Three-phase asynchronous motor, 1kW n=1400 (230V/400V)
SE2673-1H
1
1085 Self-commutated converter circuits
CO3636-3B
1
1086 Three-phase isolating transformer 1300VA
CO3636-3G
1
Lucas Nülle GmbH
Page 173/205
www.lucas-nuelle.com
1087 Incremental position encoder 1024 pulses, 1kW
SE2663-5T
1
1088 USB adapter with Matlab toolbox for power electronics
CO3636-3D
1
1089 Coupling guard, 1kW
SE2662-6B
1
1090 Rubber coupling sleeve, 1kW
SE2662-6A
1
Media:
Pos.
Product name
Bestell-Nr.
Anz.
1091 Interactive Lab Assistant: Frequency converter drives
SO2800-2L
1
1092 Interactive Lab Assistant: Field-oriented control using MatlabSimulink
SO2800-2V
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
1093 Servo machine test bench for 1kW machines incl. ActiveServo
software(D,GB,F,E)
CO3636-6W
1
1094 Rubber coupling sleeve, 1kW
SE2662-6A
1
1095 Coupling guard, 1kW
SE2662-6B
1
1096 Shaft end guard, 1kW
SE2662-6C
1
Lucas Nülle GmbH
Page 174/205
www.lucas-nuelle.com
Measuring instruments:
Pos.
Product name
Bestell-Nr.
1097 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
1098 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
1099 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
1100 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
1101 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
1102 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
1103 Protected power distribution for working stations
ST8008-8M
1
1104 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
1105 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
1106 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
1107 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
1108 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 175/205
www.lucas-nuelle.com
EPE 52-1 Regulated permanent magnet servo drive with Matlab - Simulink 1kW
EPE 52-1 Regulated permanent magnet servo drive with Matlab - Simulink 1kW
Training objectives:
Setting up a hardware-in-the-loop system under real-time conditions
Modelling and designing cascade closed-loop control for a DC motor on an ongoing design level
Reducing the control system to discrete components to run on a digital signal processor
Creation and optimisation of automatic flow-rate and speed controllers
Park- and Clarke transformation
Integration of the space phasor modulation to optimize the control of the IGBT
Speed detection using incremental sensors
Comparison of simulation results with actual measurements
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
1109 Synchron Servomotor 1kW
SE2672-5S
1
1110 Self-commutated converter circuits
CO3636-3B
1
1111 Three-phase isolating transformer 1300VA
CO3636-3G
1
Lucas Nülle GmbH
Page 176/205
www.lucas-nuelle.com
1112 Incremental position encoder 1024 pulses, 1kW
SE2663-5T
1
1113 USB adapter with Matlab toolbox for power electronics
CO3636-3D
1
1114 Coupling guard, 1kW
SE2662-6B
1
1115 Rubber coupling sleeve, 1kW
SE2662-6A
1
Media:
Pos.
Product name
Bestell-Nr.
Anz.
1116 Interactive Lab Assistant: Servo motors, electronically
commutated motors
SO2800-2M
1
1117 Interactive Lab Assistant: Servo drives using Matlab-Simulink
SO2800-2W
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
1118 Servo machine test bench for 1kW machines incl. ActiveServo
software(D,GB,F,E)
CO3636-6W
1
1119 Rubber coupling sleeve, 1kW
SE2662-6A
1
1120 Coupling guard, 1kW
SE2662-6B
1
1121 Shaft end guard, 1kW
SE2662-6C
1
Lucas Nülle GmbH
Page 177/205
www.lucas-nuelle.com
Measuring instruments:
Pos.
Product name
Bestell-Nr.
1122 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
1123 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
1124 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
1125 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
1126 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
1127 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
1128 Protected power distribution for working stations
ST8008-8M
1
1129 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
1130 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
1131 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
1132 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
1133 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 178/205
www.lucas-nuelle.com
EPE 53-1 DC drives with cascade control using Matlab - Simulink 1kW
EPE 53-1 DC drives with cascade control using Matlab - Simulink 1kW
Training objectives:
Setting up a hardware-in-the-loop system under real-time conditions
Modelling and designing cascade closed-loop control for a DC motor on an ongoing design level
Reducing the control system to discrete components to run on a digital signal processor
Creation and optimisation of automatic flow-rate and speed controllers
Speed detection using incremental sensors
Comparison of simulation results with actual measurements
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
1134 DC multi-circuit, compound wound machine, 1kW
SE2662-5D
1
1135 Exciter for 0-200V regulating transformer
CO3212-5Q
1
1136 Self-commutated converter circuits
CO3636-3B
1
1137 Three-phase isolating transformer 1300VA
CO3636-3G
1
Lucas Nülle GmbH
Page 179/205
www.lucas-nuelle.com
1138 Incremental position encoder 1024 pulses, 1kW
SE2663-5T
1
1139 USB adapter with Matlab toolbox for power electronics
CO3636-3D
1
1140 Coupling guard, 1kW
SE2662-6B
1
1141 Rubber coupling sleeve, 1kW
SE2662-6A
1
Media:
Pos.
Product name
Bestell-Nr.
Anz.
1142 Interactive Lab Assistant: Inverter-fed drives with DC motors
SO2800-2K
1
1143 Interactive Lab Assistant: DC drives using Matlab-Simulink
SO2800-2U
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
1144 Servo machine test bench for 1kW machines incl. ActiveServo
software(D,GB,F,E)
CO3636-6W
1
1145 Rubber coupling sleeve, 1kW
SE2662-6A
1
1146 Coupling guard, 1kW
SE2662-6B
1
1147 Shaft end guard, 1kW
SE2662-6C
1
Measuring instruments:
Lucas Nülle GmbH
Page 180/205
www.lucas-nuelle.com
Pos.
Product name
Bestell-Nr.
1148 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
1149 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
1150 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
1151 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
1152 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
1153 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
1154 Protected power distribution for working stations
ST8008-8M
1
1155 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
1156 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
1157 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
1158 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
1159 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 181/205
www.lucas-nuelle.com
Industrial drive technology 1kW
Industrial drive technology 1kW
Today's industrial world is no longer conceivable without controllable electrical drives. Their area of application
ranges from special high power drives to vehicle powering, machine tooling and production machines and
includes automotive applications. In addition to the machines themselves, it is power electronics in conjunction
with automation, automatic control engineering and bus technology which are having such a great impact on the
drive's response and operating possibilities.
Unlike didactically-modified drives, this training equipment incorporates industrial components. Thus the system
focuses on the handling and operating (setting parameters) of real industrial equipment. Using the servo
drive/braking system the response of the drives can be investigated dynamically and statically and using
different working machines. The equipment is designed in the form of training panels.
Lucas Nülle GmbH
Page 182/205
www.lucas-nuelle.com
EDT 17-1 Smooth starting three-phase machines 1kW
EDT 17-1 Smooth starting three-phase machines 1kW
Experiment topics:
Putting the system into operation
Setting the parameters of the run-up and run-down ramp functions and starting voltage
Investigating current and voltage during start-up
Start-up with different loads
Comparison to star-delta start-up
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
1160 Smooth starter industrial type for 3-phase asynchronous
machines up to 1kW
CO3636-5Q
1
1161 Three-phase asynchronous motor, 1kW n=1400 (230V/400V)
SE2673-1H
1
1162 Cut-out switch, 4 pole
CO3212-1W
1
Lucas Nülle GmbH
Page 183/205
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
1163 Interactive Lab Assistant: Industrial smooth starter, freq.converter
0.3/1 kW
Anz.
SO2800-1E
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
1164 Servo machine test bench for 1kW machines incl. ActiveServo
software(D,GB,F,E)
CO3636-6W
1
1165 Rubber coupling sleeve, 1kW
SE2662-6A
1
1166 Coupling guard, 1kW
SE2662-6B
1
1167 Shaft end guard, 1kW
SE2662-6C
1
Power supply:
Pos.
Product name
Bestell-Nr.
1168 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
1169 Digital/analog multimeter, wattmeter, power-factor incl. software
Lucas Nülle GmbH
Page 184/205
Anz.
CO5127-1Z
1
www.lucas-nuelle.com
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
1170 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
1171 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
1172 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
1173 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
1174 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
1175 Protected power distribution for working stations
ST8008-8M
1
1176 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
1177 Protection cover for three-level experiment trolleys
ST8010-9Y
1
1178 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
1179 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
1180 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
Lucas Nülle GmbH
Page 185/205
www.lucas-nuelle.com
EDT 25-1 Drives with frequency converter drives 1kW
EDT 25-1 Drives with frequency converter drives 1kW
Experiment topics:
Putting the system into operation (computer-aided)
Programming basic functions:
Setting the setpoint, rotation direction, starting function, operating frequency, limiting values, nominal
voltage, nominal current, nominal frequency, power factor etc.
Investigating the operating response
Measuring the power and rms values
Load experiments Recording the speed/torque characteristic in motor operation (1/3 quadrants)
Optimisation of the U/f characteristic
Compensation of the stator resistance
Field weakening control
Brake chopper operation
Lucas Nülle GmbH
Page 186/205
www.lucas-nuelle.com
Frequency converter Lenze 8400 1phase
Frequency converter Lenze 8400 1phase
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
1181 Frequency converter 1.5kW (Lenze 8400)
CO3636-5K
1
1182 Brake resistor 0.4kW for frequency converters
CO3636-5W
1
1183 Three-phase asynchronous motor, 1kW n=1400 (230V/400V)
SE2673-1H
1
Optional Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
1184 USB diagnostic adapter for Lenze 8400 frequency converter
LM8929
1
1185 PROFIBUS DP interface module for frequency converter Lenze
8400
LM8932
1
Lucas Nülle GmbH
Page 187/205
www.lucas-nuelle.com
1186 PROFINET interface module for frequency converter Lenze 8400
LM8937
1
Media:
Pos.
Product name
Bestell-Nr.
Anz.
1187 QuickChart set, 8400 single-phase frequency converters (2 charts, SO6200-7F
GB)
1
1188 Interactive Lab Assistant: Industrial smooth starter, freq.converter
0.3/1 kW
1
SO2800-1E
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
1189 Servo machine test bench for 1kW machines incl. ActiveServo
software(D,GB,F,E)
CO3636-6W
1
1190 Rubber coupling sleeve, 1kW
SE2662-6A
1
1191 Coupling guard, 1kW
SE2662-6B
1
1192 Shaft end guard, 1kW
SE2662-6C
1
Power supply:
Pos.
Product name
Bestell-Nr.
1193 Universal power supply for electrical machines
Lucas Nülle GmbH
Page 188/205
Anz.
CO3212-5U
1
www.lucas-nuelle.com
Measuring instruments:
Pos.
Product name
Bestell-Nr.
1194 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
1195 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
1196 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
1197 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
1198 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
1199 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
1200 Protected power distribution for working stations
ST8008-8M
1
1201 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
1202 Protection cover for three-level experiment trolleys
ST8010-9Y
1
1203 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
1204 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
1205 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
Lucas Nülle GmbH
Page 189/205
www.lucas-nuelle.com
Frequency converter Lenze 8400 3phase
Frequency converter Lenze 8400 3phase
Lucas Nülle GmbH
Page 190/205
www.lucas-nuelle.com
Basic equipm ent set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
1206 Frequency converter, industrial type 1.5kW 3-phase (Lenze 8400)
CO3636-5L
1
1207 Brake resistor 0.2kW for frequency converters, 3-phase
CO3636-5X
1
1208 Three-phase asynchronous motor, 1kW n=1400 (230V/400V)
SE2673-1H
1
Optional Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
1209 USB diagnostic adapter for Lenze 8400 frequency converter
LM8929
1
1210 PROFIBUS DP interface module for frequency converter Lenze
8400
LM8932
1
1211 PROFINET interface module for frequency converter Lenze 8400
LM8937
1
Media:
Pos.
Product name
Bestell-Nr.
Anz.
1212 QuickChart set, 8400 three-phase frequency converters (2 charts,
GB)
SO6200-7G
1
1213 Interactive Lab Assistant: Industrial smooth starter, freq.converter
0.3/1 kW
SO2800-1E
1
Lucas Nülle GmbH
Page 191/205
www.lucas-nuelle.com
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
1214 Servo machine test bench for 1kW machines incl. ActiveServo
software(D,GB,F,E)
CO3636-6W
1
1215 Rubber coupling sleeve, 1kW
SE2662-6A
1
1216 Coupling guard, 1kW
SE2662-6B
1
1217 Shaft end guard, 1kW
SE2662-6C
1
Power supply:
Pos.
Product name
Bestell-Nr.
1218 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
1219 Digital/analog multimeter, wattmeter, power-factor incl. software
Anz.
CO5127-1Z
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
1220 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
1221 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
1222 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
Lucas Nülle GmbH
Page 192/205
www.lucas-nuelle.com
1223 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
1224 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
1225 Protected power distribution for working stations
ST8008-8M
1
1226 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
1227 Protection cover for three-level experiment trolleys
ST8010-9Y
1
1228 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
1229 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
1230 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
Lucas Nülle GmbH
Page 193/205
www.lucas-nuelle.com
EDT 51-1 Motor management relays 1kW
EDT 51-1 Motor management relays 1kW
Training objectives:
Configuration and operation (computer based)
Programming of basic functions:
direct starter motors, star-delta starting, motor protection, overload limits, switch-off behaviour
Investigation of operating response
Measurement of power and RMS values
Load experiments
Determination of operating points
Measurement of dynamic processes during start-up
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
1231 Motor management relay with parameter setting software
CO3636-6C
1
1232 Three-phase asynchronous motor, squirrel-cage, 1kW
SE2672-5G
1
Lucas Nülle GmbH
Page 194/205
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
Anz.
1233 Manual EDT51, Controlling motors with motor management relays
SH5002-3R
1
1234 QuickChart set, Engine management relays (GB)
SO6200-7C
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
1235 Servo machine test bench for 1kW machines incl. ActiveServo
software(D,GB,F,E)
CO3636-6W
1
1236 Rubber coupling sleeve, 1kW
SE2662-6A
1
1237 Coupling guard, 1kW
SE2662-6B
1
1238 Shaft end guard, 1kW
SE2662-6C
1
Power supply:
Pos.
Product name
Bestell-Nr.
1239 Universal power supply for electrical machines
Anz.
CO3212-5U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
1240 Digital/analog multimeter, wattmeter, power-factor incl. software
Lucas Nülle GmbH
Page 195/205
Anz.
CO5127-1Z
1
www.lucas-nuelle.com
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
1241 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
1242 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
1243 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
1244 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
1245 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
1246 Protected power distribution for working stations
ST8008-8M
1
1247 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
1248 Protection cover for three-level experiment trolleys
ST8010-9Y
1
1249 PC holder for SybaPro experiment trolleys, height/width adjustable
ST7200-5A
1
1250 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST8010-4T
1
1251 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
Lucas Nülle GmbH
Page 196/205
www.lucas-nuelle.com
Equipment sets for practical training
Equipment sets for practical training
Making windings in electrical machines and transformers
Lucas Nülle GmbH
Page 197/205
www.lucas-nuelle.com
Making windings in electrical machines and transformers
Electrical machines and transformers are some of the most important components to be found in electrical
engineering and electronics and have to be manufactured and maintenanced in huge numbers all over the world.
The capacity for manufacturing such components is a basic prerequisite for their industrial production. The
practical training systems for the topic of "making windings in electrical machines " and "making windings in
transformers " use standard commercial materials and systematic instructions to convey and train the
necessary know-how and skills in project-oriented and skill-building exercises focused on how to work with the
raw materials and winding machines.
EMW 10 Making transformer windings
EMW 10 Making transformer windings
This training system takes a hands-on approach to teach how a three-phase transformer is constructed. It is
possible to put together a completely functional transformer, the response of which can be investigated with the
aid of a load.
Training objectives:
Electrical and mechanical assembly of single-phase and three-phase transformers
Determining winding data
Making windings
Standard operational testing for transformers
Connection, wiring and commissioning
Differing operating responses with various loads and circuits
Lucas Nülle GmbH
Page 198/205
www.lucas-nuelle.com
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
1252 Construction kit for three-phase transformer with terminal plate
SE2670-3S
1
1253 Material for "Transformer windings" kit to build 20 transformers
SE2670-5A
1
1254 RLC load
CO3636-7B
1
Media:
Pos.
Product name
Bestell-Nr.
1255 Manual EMW 10, Transformer windings
Anz.
SH5002-4B
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
Anz.
1256 Insulation tester "Insu 10"
LM2333
1
1257 Digital/analog multimeter, wattmeter, power-factor incl. software
CO5127-1Z
1
1258 Multi13S digital multimeter
LM2330
1
Accessories:
Pos.
Product name
Bestell-Nr.
1259 Miniature winding machine with hand crank, including winding
templates
Lucas Nülle GmbH
Page 199/205
LM8525
Anz.
1
www.lucas-nuelle.com
1260 Set of tools for "Electrical machine windings"
SE2670-4D
1
1261 Set of tools "Electric I"
SE2670-4A
1
1262 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
1263 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
15
1264 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
1265 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
1266 SybaPro mobile lab trolley with plug board, 1250x700x760mm
ST7200-3D
1
Lucas Nülle GmbH
Page 200/205
www.lucas-nuelle.com
EMW 20 Electrical machine windings
EMW 20 Electrical machine windings
This training system takes a hands-on approach to teach how a three-phase motor with a squirrel-cage rotor is
constructed. It is possible to put together a completely functional motor, the response of which can be
investigated with the aid of a machine test stand.
Training objectives:
Electrical and mechanical assembly of a motor
Determining winding data
Making windings
Insertion and connection of windings
Standard operational testing for motors
Connection, wiring and commissioning
Recording speed-torque response
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
1267 Construction kit for three-phase motor on iron core with nowinding SE2670-3H
1
1268 Material for "Three-phase motor windings" kit,to build 10 motors
1
Lucas Nülle GmbH
Page 201/205
SE2670-5F
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
1269 Manual EMW 20, Assembly of a three-phase motor with squirrel
cage rotor
Anz.
SH5002-1X
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
Anz.
1270 Insulation tester "Insu 10"
LM2333
1
1271 Digital/analog multimeter, wattmeter, power-factor incl. software
CO5127-1Z
1
1272 Multi13S digital multimeter
LM2330
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
1273 Miniature winding machine with hand crank, including winding
templates
LM8525
1
1274 Set of tools for "Electrical machine windings"
SE2670-4D
1
1275 Set of tools "Electric I"
SE2670-4A
1
1276 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
1277 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
15
1278 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
Lucas Nülle GmbH
Page 202/205
www.lucas-nuelle.com
1279 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
1280 SybaPro mobile lab trolley with plug board, 1250x700x760mm
ST7200-3D
1
Assembly of industrial control cabinets
Assembly of industrial control cabinets
Lucas Nülle GmbH
Page 203/205
www.lucas-nuelle.com
EPL 25 Frequency converters project work kit
EPL 25 Frequency converters project work kit
The training system conveys in practical fashion how industrial components are built and wired in a control
cabinet. Using frequency converters and miniature control units, it is possible to assemble projects which are
typical of industrial installations, to set their parameters and to test them.
Training objectives:
Creating and analysing circuit diagrams
Electromagnetically compatible assembly and wiring of a control cabinet with industrial components
Operating the cabinet
Approval according to DIN EN standards
Protective earth measurements
Insulation measurement
Setting parameters for frequency converters
Programming a miniature control system using LOGO
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
1281 Industrial switch cabinet with stand
Lucas Nülle GmbH
SE2670-7Y
Page 204/205
Anz.
1
www.lucas-nuelle.com
1282 Accessories for frequency converters project work kit
SE2670-5T
1
1283 Set of materials for frequency converters project work kit
SE2670-5G
1
1284 Three-phase asynchronous motor, 0.37kW with industrial
connection, 230/400V
SE2673-1L
1
1285 PC connection cable for LOGO module USB
SO3213-5E
1
Media:
Pos.
Product name
Bestell-Nr.
1286 Manual EPL 25, Frequency converters project work kit
Anz.
SH5002-3U
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
Anz.
1287 Insulation tester "Insu 10"
LM2333
1
1288 Multi13S digital multimeter
LM2330
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
1289 Set of tools "Electric I"
SE2670-4A
1
1290 SybaPro mobile lab trolley with plug board, 1250x700x760mm
ST7200-3D
1
Lucas Nülle GmbH
Page 205/205
www.lucas-nuelle.com