Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
WJ-HD300 series Play Only Mode guide Maintenance guide 1. Outline This guide describes how to playback the recorded HDD with another unit in Play Only Mode in the WJ-HD300 series (hereinafter expressed as HD300) Applicable model: WJ-HD309, WJ-HD316, WJ-HD309A, WJ-HD316A, WJ-HDE300 used with WJ-HD300 series. Remarks +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ There is no compatibility in the HDD between WJ-HD309/316 and WJ-HD309A/316A. Play Only Mode cannot be used for the HDD operated in RAID5 mode. The HDD with physical failure may not be played back. The HDD which has been stored for a long period may not be played back. Network function is not available during the Play Only Mode. +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 3. Mounting the HDD into Playback unit (1) Remove the recorded HDD from the original unit by referring the "operating instructions". (2) Install the HDD to the playback unit by referring the "operating instructions" 4. Start Play Only Mode (1) Start the playback unit in Play Only Mode by turning on the power with "1" and "7" button pressed. (2) Hold the "1" and "7" button until the start up screen is displayed. (3) Play Only Mode message is displayed in about 3 minutes. Play only mode... (4) Disk select menu is displayed after the startup. Select the desired disk and then press "SET" button on the OK button icon. Disk select CANCEL Panasonic System Solutions 1 HD300_PlayOnlyModeGuide_A WJ-HD300 series Play Only Mode guide Maintenance guide (5) Record list is displayed. Select a record then press "PLAY" button to playback the record. It is possible to copy the data to external medium when required (Refer to the operating instructions). (6) Press "SET/ESC" button to return to the disk select menu when playback operation is completed. (7) Turn off the power and restore the original HDD. Caution +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Do not start the unit in normal mode when the HDD for playback is installed otherwise the format menu will be displayed at start up. +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++++++++++++++++++End Panasonic System Solutions of the document+++++++++++++++++++++++++++++++++ 2 HD300_PlayOnlyModeGuide_A