* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download Stereo Power Defined
Survey
Document related concepts
Wien bridge oscillator wikipedia , lookup
Transistor–transistor logic wikipedia , lookup
Standby power wikipedia , lookup
Opto-isolator wikipedia , lookup
Distortion (music) wikipedia , lookup
Valve RF amplifier wikipedia , lookup
Captain Power and the Soldiers of the Future wikipedia , lookup
Power electronics wikipedia , lookup
Radio transmitter design wikipedia , lookup
Switched-mode power supply wikipedia , lookup
Transcript
Stereo Power Defined MC302 Power Amplifier, the modern classic. •Larger, easy to read power wattmeters. •Twin balanced input-output flexibility. •Remote power and meter illumination control. •Latest electrical design promises ‘Just Right’ temperature and long life. •Unique, McIntosh designed speaker wire •Full power delivered to all loudspeaker binding posts make the perfect connection types and designs. with all types of speaker wire terminations. •Stainless steel chassis. •Meter backlight control for use with •Ultra low distortion design for realistic compatible McIntosh Control Centers. musical impact. www.mcintoshlabs.com Handcrafted in America since 1949, McIntosh’s unwavering commitment to performance, innovation and quality brings an elevated music and film experience. MC302 Power Amplifier Power Output Wide Band Dampening Factor 300 watts minimum sine wave continuous average Power Output with both channels operating Greater than 40 Output Load Impedance 22,000 ohms Terminals for 8, 4, and 2 ohms Rated Power Bandwidth 20Hz to 20 KHz Total Harmonic Distortion Input Impedance Voltage Gain 29dB, 8 ohms 26dB, 4 ohms 23dB, 2 ohms 0.005% maximum harmonic distortion at any level from 250 milliwatts to rated power output Power Guard Frequency Response Power Control Input +0, -0.25dB from 20Hz to 20 KHz +0,-3.0dB from 10Hz to 100 KHz 5-15VDC, <1mA Input Sensitivity 12VDC, 50mA maximum total, delayed 0.2 seconds 3.4V Balanced 1.7V Unbalanced A-Weighted Signal To Noise Ratio 95dB Balanced (120dB below rated output) 93dB Unbalanced (118 below rated output) Intermodulation Distortion 0.005% maximum if instantaneous peak power output does not exceed twice the rated output, for any combination of frequencies from 20Hz to 20KHz Less than 2% THD with up to 14dB overdrive Power Control Output Power Requirement Field AC voltage conversion is not possible. Factory Configured for one of the following AC voltages: 100 volts, 50/60Hz, 8 amps 110 volts, 50/60Hz, 7.5amps 120 volts, 50/60Hz, 7 amps 220 volts, 50/60Hz, 4 amps 240 volts, 50/60Hz, 4 amps Standby <0.5W For the Consumer’s Protection In order to ensure the highest level of customer satisfaction, “new” McIntosh products may only be purchased over-the-counter or delivered and installed by an Authorized McIntosh Dealer. McIntosh products that are purchased over the Internet, by phone or mail order are presumed to be “used” and do not qualify for any McIntosh Warranty. McIntosh does not warrant, in any way, products that are purchased from anyone who is not an Authorized Dealer or products that have had their serial number altered or defaced. To experience the legendary performance of McIntosh, please call on us at 1.800.538.6576 www.mcintoshlabs.com