Download The Unit Sample Response of LTI Systems

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Surge protector wikipedia , lookup

Radio transmitter design wikipedia , lookup

CMOS wikipedia , lookup

Ohm's law wikipedia , lookup

Analog-to-digital converter wikipedia , lookup

Valve audio amplifier technical specification wikipedia , lookup

Wilson current mirror wikipedia , lookup

Power electronics wikipedia , lookup

Valve RF amplifier wikipedia , lookup

Resistive opto-isolator wikipedia , lookup

Transistor–transistor logic wikipedia , lookup

Voltage regulator wikipedia , lookup

Integrating ADC wikipedia , lookup

Current mirror wikipedia , lookup

Operational amplifier wikipedia , lookup

Schmitt trigger wikipedia , lookup

Network analysis (electrical circuits) wikipedia , lookup

Switched-mode power supply wikipedia , lookup

Opto-isolator wikipedia , lookup

Rectiverter wikipedia , lookup

Transcript
The Unit Sample Response of LTI Systems
Now we define the unit sample and unit impulse responses of our systems.
Definition 1.3. Define to be the unit sample response of a system with input
, the unit sample shifted to time k. If the system is time invariant, then define
, and .
Define to be the unit impulse response of a system with input , the
unit impulse shifted to time . If the system is time invariant, then define , and
.
Given a linear system, then the unit sample and unit impulse responses determine the output of
these linear systems. If the systems are also time invariant, then there is only one impulse
response and it just gets shifted around.
Example 1.2. Return to the simple example . Then 0, with 1 1, and 2 2 2, etc… We see that there are many different impulse responses,
which are not simply shifts of each other.
So now we can write down the general time solution for arbitrary inputs.
Proposition 1.3. Let x[n] be rewritten as ∑ . Then the output of a linear
system with unit sample responses Then the output of a linear system with unit sample responses
to input is given by
∑ ;
If the system is time invariant, with , then
Let x(t) be rewritten as . Then the output of a linear system with unit
sample responses to input is given by
;
If the system is time-invariant, with , then
;
Example 1.3. Let system be a constant coefficient difference equation with zero initial condition
y[-∞]=0 and with input x[n] and output y[n] given by system equation
1
Let’s show that it is linear, time-invariant with unit sample response
Linearity: Let give , and give , then we have
! " # ! ! 1 " # # 1
! " # ! 1 " # 1
Time invariant: Introduce shift $ according to
$ $ $ $ $ $ 1
Let $ $, then for any $ we have
1
$ $ $ $ $ $ 1
Implying
$ $ $ 1
To solve for the unit-sample response, let
1
Then 0, % 1, then
0 0 1
1 0 2 1 , ' 0
Notice, complex exponentials pass right through this system as well with just a complex number
added, guess () *+, then
) *+ () *+ () *+,
Implying
(
1
1 ) ,*+
Example 1.4. Let us return to our favorite differential equation:
- " , ∞ 0,
with impulse response
) ,./ To see this, let us solve the differential equation for the impulse response:
- " , ∞ 0
Use the face that - , implying for t < 0, then h(t)=0. For ' 0, then if ) ,./ ,
we have
) ,./ " ) ,./ ) ,./
) ,./ " ) ,./ At t < 0, 0=0, and
t > 0 0 ) ,./ " ) ,./ t=0
0
0/
0
) ,./ " ) ,./ 0/
So now we have our general solutions for the difference equations and differential equations. For
the difference equation
1
We have
11 2,3
3
, 2,3
3
,
2,3
For an input of , then we have
2,3
,
, 2,3
1 ,4
1 ,
4 1
1 4
1
1
For the differential equation
- " We have
3
11 5 ) ,./, ,3
/
5 ) ,./, ,3
For x(t)=u(t), then
/
5 ) ,./, ) ,./
1 6 . 1
) | 1 ) ,./ 0
Example 1.5. Examine an RLC circuit, take the output across the capacitor. Then y(t) is taken as
the output with input the voltage source x(t). To derive the input-output relationship, let’s use one
of the two stalwarts of circuit theory – Kirchoffs voltage law. The voltage across the capacitor
output y(t) when added to the voltage across the resistor must add to the input voltage x(t). The
voltage across the resistor is RI(t). I, the derivative of the current is given by 8- .
Thus, we have the equation
:8- " , ∞ 0
Notice the initial condition corresponds to no voltage across the capacitor – system at rest.
We have our LTI system (first-order constant-coefficient differential equation), with impulse
response ,=/
) >?
;<
. The output becomes
5 1 /,
) ;< :8
/,
1 /
5 ) ;< :8 ,3