Download BasarabaK0812 - ScholarWorks

WHAT ARE THE EFFECTS OF COMPUTER SIMULATIONS ON STUDENTS’
CONCEPTUAL UNDERSTANDING OF NEWTONIAN MECHANICS?
by
Kristian Robert Basaraba
A professional paper submitted in partial fulfillment
of the requirements for the degree
of
Master of Science
in
Science Education
MONTANA STATE UNIVERSITY
Bozeman, Montana
July 2012
ii
STATEMENT OF PERMISSION TO USE
In presenting this professional paper in partial fulfillment of the requirements for
a master’s degree at Montana State University, I agree that the MSSE Program shall
make it available to borrowers under rules of the program.
Kristian Robert Basaraba
July 2012
iii
DEDICATION
I dedicate this paper to my wife Theresa who has been very supportive and
encouraging through this whole process and has given me the best gift in the world, our
son Kingston.
iv
ACKNOWLEDGEMENTS
I also acknowledge my committee members, Dr. Eric Brunsell, Dr. Peggy Taylor
and Dr. Greg Francis whose guidance and advice has been extremely appreciated.
v
TABLE OF CONTENTS
INTRODUCTION AND BACKGROUND ........................................................................1
CONCEPTUAL FRAMEWORK ........................................................................................3
METHODOLOGY ..............................................................................................................7
DATA AND ANALYSIS ..................................................................................................13
INTERPRETATION AND CONCLUSION .....................................................................20
VALUE ..............................................................................................................................23
REFERENCES CITED ......................................................................................................25
APPENDICES ...................................................................................................................27
APPENDIX A: Comparison Review Exam ..........................................................28
APPENDIX B: CLASS Survey ............................................................................32
APPENDIX C: Vector Addition Activity .............................................................38
APPENDIX D: Fletcher’s Trolley Activity ..........................................................42
APPENDIX E: Atwood Machine Activity ...........................................................47
APPENDIX F: Inclined Plane (Frictionless) Activity ..........................................49
APPENDIX G: Friction Activity ..........................................................................56
APPENDIX H: Gravity Force Lab Activity .........................................................65
APPENDIX I: Vector Addition Quiz ...................................................................67
APPENDIX J: Newton’s Laws Quiz ....................................................................69
APPENDIX K: Gravitational Forces and Fields Quiz..........................................73
APPENDIX L: Summative Unit Exam.................................................................77
APPENDIX M: Student Interview Questions.......................................................87
vi
LIST OF TABLES
1. Data Triangulation Matrix .............................................................................................11
2. CLASS Survey Statements and Percentage of Responses Pre- and
Post-Intervention ....................................................................................................19
vii
ABSTRACT
Computer simulations provide an interactive and visual environment that promote
and support conceptual change in physics education. They are tools that enable students
to become actively engaged in their learning and encourage concept exploration and
assist in developing their inquiry skills. One area that students consistently retain
misconceptions is that of their understanding of Newtonian mechanics and the
application of his three laws to motion problems. It is through the implementation of a
series of inquiry based student activities that these simulations will be evaluated for their
effectiveness in improving conceptual understanding. The study used both qualitative
and quantitative methods including summative exams, class observations, student surveys
and interviews.
1
INTRODUCTION AND BACKGROUND
Project Background
Teaching and Classroom Environment
September 2007 saw the implementation of a new program of studies for Physics
20 and 30 in the province of Alberta. This new program introduced a whole new set of
verbs in the learner outcomes that indicate the depth of understanding that students
completing the course should have. According to Pankratz (2011), “some of the verbs
such as list, identify, state, or define denote tasks that are very cognitively easy; while
other verbs such as explain, evaluate and assess denote tasks that are very cognitively
challenging” (p. 1) for the students. Classifying these verbs according to Bloom’s
taxonomy reveal that more of the student learner outcomes fall under the classification of
comprehension, application and higher mental activities (HMA) as opposed to knowledge
based learner outcomes prevalent in the old program of studies. This shift requires
students to communicate their understanding of concepts and the relationships between
ideas at a deeper conceptual level demonstrating “flexibility and creativity when solving
problems” (Pankratz, 2011, p. 1) in order to achieve the standard of excellence.
One area that has been a challenge for students to achieve the standard of
excellence in this new program, are the outcomes covered in the dynamics unit. This unit
requires students to study the main concepts of Newtonian mechanics such as the three
laws of motion, static and kinetic friction and the law of universal gravitation. Many of
the concepts and skills learned in this unit provide a solid foundation for enabling success
2
in the Physics 20 and30 program of studies. Most of these concepts are familiar to
students yet many students harbour misconceptions that inhibit their full understanding of
the science behind these topics. The purpose of this research is to assist students in
visualizing and overcoming these misconceptions behind Newtonian mechanics by
employing the simulations designed by PhET, ExploreLearning and Alberta Education in
order to evaluate their effectiveness in improving a students’ conceptual understanding
and equipping them with the necessary tools to engage them at a higher cognitive level.
Focus Questions
What are the effects of computer simulations on students’ conceptual understanding of
Newtonian mechanics?
How will the use of computer simulations effect student achievement of learner outcomes
related to Newtonian mechanics?
How do computer simulations influence student attitudes towards active inquiry and
problem solving?
School Demographics
Students involved in this study attend Salisbury Composite High School in
Sherwood Park, Alberta, Canada a suburb of Edmonton, Alberta that has a population of
approximately 62,000 people. According to the 2011 school database Salisbury has an
enrollment of 1100 students of predominantly Caucasian youth with 95% completing
their graduation requirements. According to the Fraser Institute, an independent
non-partisan research and educational organization based in Canada, Salisbury is
academically ranked 144th out of 276 high schools in Alberta.
3
Although there is a limited amount of ethnic diversity many of the families that
live in the area are socioeconomically advantaged and well educated. According to
Statistics Canada (2006), Sherwood Park residents have a median household income of
$102,004 and an average income of $109,770 with 55.3 per cent of residents ages 15 and
older have some post secondary education. As a result, there are high expectations
placed on the students academically and a large percentage go on to further their studies
at post-secondary institutions.
CONCEPTUAL FRAMEWORK
There are many researchers (Van Heuvelen, 2001; Zollman, 1996) that argue
traditional physics instruction does not result in a coherent and consistent conceptual
framework for students and results in gross misconceptions and lack of understanding.
According to Kelly et al. (2008), “learning is often reduced to student passivity while the
teacher becomes the content messenger, pouring knowledge into the empty vessel (p. 2).”
The work of McDermott (2001) and the Physics Education Group have outlined several
research-based generalizations on the effect of traditional based instruction and student
learning and have concluded that teaching by telling is extremely ineffective. In addition
to, McDermott also outlined research-based teaching strategies that include methods in
which teachers must expose students to the material in multiple contexts, have students
participate in the process of constructing qualitative models and provide activities that are
intellectually active in order to develop a functional understanding.
Since students have their own understandings and views of the world, there are
4
preconceptions and scientific misconceptions that conflict with science taught in the
classroom (Yip, 1998). Constructivist views suggest that in order to eliminate these
misconceptions and for conceptual change to occur students must be confronted with a
discrepant event that conflicts with their world-view (Piaget, 1985). This conflict
produces a “disequilibration or cognitive conflict” (p. 618) that allows the student to
reflect on what happens and as a result create new knowledge (Zacharia et al., 2003).
Longfield (2009) defines a discrepant science event as an event that “vividly portrays an
abstract concept that has an unexpected outcome” (p. 266).
One engaging classroom approach that has gained momentum and favor in the
literature is the use of computer simulations to teach physics. Simulations are powerful
tools that have valuable educational potential to help students understand scientific
concepts and assist in promoting conceptual change (Adams, Reid, LeMaster, McKagan,
Perkins, Dubson & Wieman, 2008). One group based out of the University of Colorado
have collaborated on the Physics Education Technology (PhET) Project which has
designed 18 research-based computer simulations to help improve the learning of physics
by allowing students to build mental models and intuition about these topics. These
simulations allow students to make predictions, manipulate parameters, set variables and
immediately visualize the results of these changes (Wieman, Perkins & Adams, 2008).
This “engaged exploration” promotes students to pose questions and actively seek the
answers by observing the results of their own interaction (Adams et al., 2008), all
characteristics of constructivist and inquiry-based learning.
It is this constructivist approach that Zhou, Brouwer, Nocente, & Martin (2005)
argue must be used in order to facilitate and enhance conceptual learning through
5
computer-based applets. This study integrated quantitative and qualitative methods
including tests, surveys, class observations and interviews to evaluate the effectiveness of
computer simulations. They discovered that although they helped improve conceptual
understanding, these simulations should be used in a constructivist teaching environment
to be more effective. Blake and Scanlon (2007) also argue that successful technology
integration for science teaching is dependent on how the teacher mediated the use of
resources, in this case how and what simulations are used. They reveal that “simulations
do not work on their own, there needs to be some structuring of the students’ interactions
with the simulation to increase effectiveness” (p. 492).
The benefits of computer simulations in assisting with a students’ understanding
of physics is well documented in the literature. In 2001, Jimoyiannis and Komis
conducted a study on two groups of 15-16 year olds to investigate how computer
simulations affected the understanding of velocity and acceleration in projectile motion.
The study found that 60% of the experimental group answered three qualitative
questionnaire tasks with effectual answers as opposed to only 30% of the control group
after using the simulations. An effectual answer was an answer that was not only correct
for the question posed but included a thorough explanation and thus understanding. A
study by Bayrak (2008) concluded that students in the experiment group who were
exposed to computer assisted instruction were more successful than the control group
students who were exposed to face-to-face instruction. This study was used to research
the effect of computer simulations in student learning of geometric optics. These are just
two examples that suggest a positive correlation between student achievement and the use
of computer simulations in improving physics understanding. Zacharias and Anderson
6
(2003) attribute the success of these simulations to the fact that they empower students,
provide unique instructional capabilities, and develop cognitive, manipulative,
investigative and communicative skills.
Other research has, however, demonstrated that the use of simulations does not
result in a significant change in student achievement. A study by Steinberg (2000)
compared a simulation on air resistance to paper and pencil activities in an introductory
university physics tutorial. The findings revealed that student performance on a common
exam question did not show any significant difference in achievement. Similar
conclusions were also found in a study by Kelly, Bradley and Gratch (2008) which
compared simulations with equipment based laboratory investigations. Students in this
study participated in twelve laboratory experiences of which six consisted of either
simulation or equipment investigations. The data used to make the comparisons were
graded pre and post-lab reports and the findings suggested that when compared,
achievement on these reports were not significantly different. However studies did show
that simulations did not hinder a students’ understanding and the despite the results the
authors argued that simulations are beneficial if used properly and effectively.
In a 2010 paper by Wieman, Adams, Loeblein and Perkins outline eight strategies
for using simulations effectively. These include: defining specific learning goals;
encourage students to use sense-making and reasoning; connect with and build on
students’ prior knowledge and understanding (including addressing possible
misconceptions); connect to and make sense of real-world experiences; encourage
productive collaborative activities; do not overly constrain student exploration; require
reasoning/sense-making in words and diagrams (i.e. multiple representations); help
7
students monitor their understanding (p. 1).
With these eight strategies in mind they highlight many different ways of
incorporating the use of simulations in the classroom including lecture, group, lab and
homework activities. It is stressed that the simulations need to be “carefully integrated
into the curriculum with appropriate activities created around them (p. 5).” One format
that may be adopted for this study is to employ a predict-test-confirm group activity
approach by giving the students a sequence of challenging questions related to the
simulation that they must work through.
Computer simulations provide an interactive, engaging and visual environment
that promotes and supports conceptual understanding. Student learners can manipulate
parameters, and construct new meaning based on the results of these manipulations if
used in a constructivist method. This construction of new knowledge results in higher
achievement and deeper conceptual understanding by enabling the student to form
connections and relationships between ideas and concepts.
METHODOLOGY
My action research took place over a period of approximately five weeks in which
students were investigating the topics of dynamics including Newton’s three laws and his
law of universal gravitation. More specifically there were two general outcomes in this
unit which included explaining the effects of balanced and unbalanced forces on velocity
and explaining that gravitational effects extend throughout the universe. The unit
requires students to apply and explain, qualitatively and quantitatively, Newton’s laws to
8
various motion-type problems as well as describe, qualitatively and quantitatively,
Newton’s law of gravitation.
Traditionally the students have been taught these concepts with the teacher
researcher providing examples and problem solving techniques using a lecture-based
instructional model. The main goals of this study were to supplement the teacher-led
approach to inquiry activities using computer simulations in order to evaluate the use of
these simulations on student comprehension, achievement, engagement and attitude.
More specifically the primary question I attempted to address was:
What are the effects of computer simulations on students’ conceptual
understanding of Newtonian mechanics?
One of the effects I focused on in this study was how the use of these simulations
affected student achievement on a common summative assessment and whether or not
these simulations had an influence on a students’ attitude towards the learning objectives
and problem solving.
Participants
In order to gauge the effectiveness of this implementation two study groups were
required. The 1st class used in this study was a grade 11 physics class with 26 students, 8
females and 18 males that served as control group and was taught using the traditional
approach, that is, no intervention. The 2nd class used in the study was also a grade 11
physics class, which consisted of 23 students, 5 females and 18 males. This second group
was subjected to the use of computer simulations in achieving student curricular
outcomes. In order to verify whether or not these two groups were comparable a
9
common non-intervention exam focused on mathematical skills necessary for success in
physics such as metric conversions, algebra and graphing skills. This exam (Appendix
A) was given after the first week of review instruction on the above topics. The research
methodology for this project received an exemption by Montana State University's
Institutional Review Board and compliance for working with human subjects was
maintained.
Data Collection
Over the course of the study there were a total of six simulations used by all
students in the study group. Each simulation that was chosen targeted various program
outcomes: Simulation 1: Vector Addition involved vector addition in one and two
dimensions (Appendix C), Simulation 2: Fletcher’s Trolley explored the relationship
between force, mass and acceleration (Appendix D), Simulation 3: Atwood Machine
applied Newton’s second law to pulleys (Appendix E), Simulation 4: Inclined Plane
(Frictionless) focused on components of gravitational force and the relationship to normal
force (Appendix F), Simulation 5: Friction looked at the difference between kinetic and
static forces (Appendix G) and Simulation 6: Gravitational Force investigated the
relationship between mass, distance and gravitational force (Appendix H).
The simulations were web-based programs used from a variety of sources such as
the PhET group, ExploreLearning Gizmos and Alberta Education. They were carefully
picked to correlate with the specific learner outcomes of the dynamics unit and for their
interactive nature. The treatment implemented involved having the students complete a
guided inquiry-based activity for each simulation that had them either collect and analyze
data, compare simulation results to theoretical predictions, describe and explain the cause
10
and effect of manipulation of the simulation or to assist and verify quantitative
calculations. For example, the Atwood Machine activity had students predict the
direction of one of the masses, gather data on fall times, analyze this data by calculating
acceleration rates, explaining why and how fall times change due to mass differences.
The activity acknowledges numerous cognitive tasks described by the various program
outcome verbs.
The data collected was used to make comparisons on student achievement and
understanding between using simulations versus no simulations on summative quizzes
and exams. Data collection techniques are summarized in table 1. The unit was divided
into three sections corresponding to the three general outcomes: vector addition in one
and two dimensions, balanced and unbalanced forces on velocity, and gravitational forces
and fields. After the completion of all the unit program outcomes students completed a
common summative unit exam.
Prior to the intervention implementation students were asked to complete the
Colorado Learning Attitudes about Science Survey CLASS (Appendix B). This was
completed pre-study and post-study to compare the student attitudes towards physics
before and after using computer simulations to achieve program outcomes. Student
interviews were also conducted after the completion of each simulation to determine their
attitudes towards and evaluate the effectiveness of the simulations.
11
Table 1
Data Triangulation Matrix
Focus Questions
Primary Question:
1. What are the
effects of computer
simulations on
students’ conceptual
understanding of
Newtonian
mechanics?
Secondary Questions:
2. How will the use of
computer simulations
affect student
achievement of
learner outcomes
related to Newtonian
dynamics?
Data Source 1
Data Source 2
Common summative
unit assessment
(semester 1:2011
compared to semester
2:2012)
Common quiz
assessments
(semester 1:2011
compared to semester
2:2012)
Common summative
unit assessment
(semester 1:2011
compared to semester
2:2012)
Common quiz
assessments
(semester 1:2011
compared to semester
2:2012)
3. How do computer
CLASS Survey
simulations influence (pre and post unit)
student attitudes
towards active inquiry
and problem solving?
Instructor
observations and
journaling
Data
Source 3
Interviews
Interviews
Summative Review Exam
The summative review exam was an instrument used to determine whether the
two groups were comparable. The instrument contains seven questions of varying length
that assess the understanding of the skills necessary for student success in physics that
were covered in the first week of instruction. These topics include equation
manipulation, unit conversions, graphing skills and calculations involving significant
digit rules and.
12
Colorado Learning Attitudes about Science Survey (CLASS)
The Colorado Learning Attitudes about Science Survey is a fairly new instrument
designed to measure student attitudes and beliefs about physics and learning physics by
researchers at the University of Colorado. According to Adams et al. (2005), the
reliability and validity of the survey has been investigated by analyses of over 5000
responses. The instrument consists of 42 statements and a Likert 5-point (strongly agree
to strongly disagree) scale to provide insight into student beliefs and attitudes about
physics. Although researchers have identified eight thematic categories within the 42
statements, each statement was compared individually as opposed to categorically for this
study. The survey was used to compare student attitudes in a grade eleven physics class
before and after a unit on Newtonian mechanics that used computer simulations to assist
students in achieving the learner outcomes.
Summative Quizzes
Students were evaluated on three of the main topics in this unit which include
vector addition, Newton’s laws and gravitational forces and fields. The vector addition
quiz (Appendix I) consisted of three questions that assessed the students’ conceptual
understanding and skills regarding vector addition. The Newton’s Laws quiz (Appendix
J) evaluated students on their understanding of inertia, static and kinetic energy and their
ability to apply Newton’s three laws quantitatively and qualitatively. The third quiz
(Appendix K) assessed students understanding of the inverse square relationship and one
dimensional vector analysis of gravitational forces and fields.
Summative Unit Exam
13
The unit exam (Appendix L) was used to assess whether or not the study
intervention had an effect on student achievement and was given to both the study and
control classes after the completion of general outcomes B1 and B2 of the Physics 20-30
Alberta Program of Studies. This exam consisted of 16 multiple choice questions, 5
numerical response questions and 5 written response questions.
Student Interviews
Students were interviewed using a written questionnaire (Appendix M) to gain a
deeper understanding and insight into their thoughts and attitudes regarding the use of the
computer simulations in achieving program outcomes. All students in the class were
provided the interview-questionnaire after the completion of the unit but only 15 students
of 22 chose to complete it.
Reflective Journal
A reflective journal was used by the instructor to monitor the perception of how
each lesson went. Observations were made of students while they completed their
inquiry activities in the computer lab and recorded in this journal.
DATA AND ANALYSIS
In order to determine the effect computer simulations had on student achievement,
conceptual understanding, and student attitudes towards physics this study collected
qualitative and quantitative data from a variety of sources. These sources included pre
and post unit surveys, student interviews, summative quiz and summative exam scores.
This data was collected from two sets of classes, Group One was taught using a
traditional lecture-based approach during semester one and Group Two was taught
14
traditionally but supplemented heavily with inquiry activities using computer simulations
during semester two. In total, there were 49 participants in this study. The researcher
determined statistical significance using the statistical analysis software GraphPad to
conduct t tests, and measures of variability and central tendency.
Comparison of Group One and Group Two’s Summative Review Exam
In order to measure the comparability of the two physics classes, a common
summative review exam was administered after a one week review of scientific
mathematics topics such as graphing skills and significant digits rules. The control group
had a Mean score of 76.13% with a Standard Deviation of 11.08. The intervention group
had a Mean score of 79.50% with a Standard Deviation of 10.17. The difference between
these two groups were not significant, t(43) = 1.0617, p = 0.2943. It can be concluded
then that the two groups are comparable when determining the effect of using computer
simulations.
Comparison of Group One and Group Two’s summative evaluation of the Dynamics unit
of study
After the conclusion of each general outcome in the dynamics unit group one and
two both completed the same summative quiz. These quizzes assessed all levels of
cognitive expectations and can be found in the appendices.
Summative Vector Quiz
The next set of data analysis compared Group One and Group Two’s summative
vector addition quiz after the completion of vector addition outcomes. Group Two used
a vector addition simulation to introduce the topics of vector addition in one dimension
15
and two dimensions to assist in the visualization of these topics. The control group had a
Mean score of 74.16% with a Standard Deviation of 15.75. The intervention group had a
Mean score of 84.59% with a Standard Deviation of 15.78. The difference between these
two groups were statistically significant, t(45) = 2.2639, p = 0.0284.
Summative Newton’s Laws Quiz
The next set of data analysis compared Group One and Group Two’s summative
Newton’s laws quiz after the completion of the general outcome: students will explain the
effects of balanced and unbalanced forces on velocity. Group Two used four of the six
simulations to assist in the exploration of these Newtonian mechanics topics. The control
group had a Mean score of 58.65% with a Standard Deviation of 13.84. The intervention
group had a Mean score of 82.05% with a Standard Deviation of 9.83. The difference
between these two groups were statistically significant, t(46) = 6.6332, p = 0.0001.
Summative Gravitational Forces and Fields Quiz
The next set of data analysis compared Group One and Group Two’s summative
gravitational forces and fields quiz after the completion of the general outcome: students
will explain that gravitational effects extend throughout the universe. Group Two used
one of the six simulations to assist in the exploration of these outcomes. The control
group had a Mean score of 64.96% with a Standard Deviation of 16.90. The intervention
group had a Mean score of 81.09% with a Standard Deviation of 14.62. The difference
between these two groups were statistically significant, t(47) = 3.5497, p = 0.0009.
Summative Dynamics Unit Exam
16
The last set of quantitative data analysis compared Group One and Group Two’s
summative dynamics unit exam after the completion of all unit program outcomes.
Group Two had their instruction supplemented with the use of six simulations while
Group One did not. The control group had a Mean score of 58.28% with a Standard
Deviation of 13.24. The intervention group had a Mean score of 79.39% with a Standard
Deviation of 9.44. The difference between these two groups were statistically significant,
t(46) = 6.3108, p = 0.0001.
Conceptual Understanding and Achievement Analysis
According to the quantitative and qualitative data collected the use of computer
simulations had an overwhelming positive effect and influence on student understanding
and achievement. This was best demonstrated by student performance on the Newton’s
Laws Quiz and the Gravitational Forces and Fields Quiz. All the questions on these
quizzes were written response format and required the students to explain their answers
unlike the Dynamics Unit Exam where the majority of questions were multiple choice,
making it more difficult to evaluate conceptual understanding. The class mean of Group
Two, those that used the simulations, were an 82% compared to a mean of 58% of Group
One and the t-test performed showed that the difference between the means was
statistically significant.
Two of the eleven interview questions given to the study group were used to
determine whether the simulations assisted in their understanding of the material. The
first question asked if the simulation helped the students visualize the ideas and concepts
of Newtonian mechanics and of the 15 respondents 73% indicated that the simulations
did help “by showing the situation” and it was easier to use the simulations than try and
17
recreate the situations in the lab.” The second question related to this asked for students
to describe how the simulations affected their understanding of the concepts and 80%
responded that they improved their ability to visualize the scenario and understand the
concepts because “when I changed certain things (parameters) I saw what that would
potentially do to the answer” thus clearly revealing the cause and effect nature of the
simulations.
Student reasons as for why and how the simulations had an effect on their
understanding were very similar in nature. A large number of responses cited that the
“visuals allowed me to understand better” and that they “helped to show what was
happening and why it was happening.” One of the visible strengths of the simulations
were to provide this visual reinforcement and actually “show the situation” as opposed to
a traditional lecture approach where visualization tends to be a barrier for students in
physics.
Attitude Data Analysis
The computer simulations did have an influence on student attitudes towards
active inquiry and problem solving according to the student interview/questionnaires. Of
the 11 questions asked in the interview/survey a total of 3 questions related to student
attitudes regarding the use of simulations in assisting them with their problem solving
skills. These included asking about the enjoyment of using the simulations, whether or
not they would use them outside of class and if they would like to use more simulations
in class.
18
When asked if they enjoyed learning the physics concepts using the simulations,
73% agreed that they were enjoyable with comments such as “they provided great
examples” and they were good for “the visual students.” They agreed that the
simulations helped them understand the concepts and liked “doing something different.”
The reasons the students gave for not enjoying the simulations included comments such
as they “found it way more useful when the teacher taught in front of the class” and “I
find it easier by being taught and using a pen and paper.”
It was interesting to note that when asked whether or not they would use
simulations to help them understand and solve problems outside of class only 20% said
they would. Reasons included, “I lose focus on the computer” and “I would rather just
refer to my notes or textbook to help me.” Yet 73% of the students would be willing to
‘do’ more physics using the computer simulations if done in-class with one student
commenting that “simulations are very helpful when paired with an in-class lesson of the
concept.”
The CLASS Survey pre- and post-intervention seemed to reveal that overall
simulations did not have a significant impact and influence on student attitudes about
physics. Of the forty two statements asked in the survey only six of them had a
significant change in the average response as summarized in Table 2.
19
Table 2
CLASS Survey Statements and percentage of responses pre- and post-intervention
(N=23)
CLASS Survey Statement
#1. A significant problem in learning
physics is being able to memorize all the
information I need to know.
#4. It is useful for me to do lots and lots of
problems when learning physics.
#9. I find that reading the text in detail is a
good way for me to learn physics.
#10. There is usually only one correct
approach to solving a physics problem.
#29. To learn physics, I only need to
memorize solutions to sample problems.
Percentages of
Responses preintervention
66.7% agree
Percentages of
Responses postintervention
9.1% agree
74% strongly agree
16% strongly agree
7.4 % disagree
41.7 % disagree
12% strongly
disagree
45.5% strongly
disagree
42% strongly
disagree
58.3% strongly
disagree
These results seem to support the notion that students have now recognized that
physics requires more than just a memorized and rote approach to problem solving. In
order to helping them achieve success in physics and reach those higher mental activity
processes mandated by the program of studies other means or strategies must be used in
order to best apply the physics principles to novel problems.
A reflective journal was kept for the length of the study in order to record teacher
observations during student completion of each of the simulation activities. This journal
also kept a time schedule of the unit length of the intervention class to compare with the
control group. In the initial planning of the study and lessons it was determined that the
unit length would be longer by approximately five class periods. It was noted however
that the unit length was only longer by three periods and not a significant change from the
control group thus not affecting the completion of the pother program outcomes of the
course. The journal was also used to monitor and record student behavior during the
20
completion of the activities. Of the six activities only one chosen simulation, the vector
addition simulation was met with some resistance by the students. This was due to the
inability to change the magnitude of the vectors easily and as a result the students became
very frustrated and quickly dismissed the merit of using the simulation. All the other
activities had the students actively engaged in the task at hand, they worked
collaboratively on the activities were motivated to get their work done. One of the main
benefits of the simulations was that if the activities were not completed during class time
the students were able to finish outside of class as opposed to a lab scenario where
sometimes they can “feel rushed and as a result affect their understanding.”
INTERPRETATION AND CONCLUSION
Computer simulations promote student learning by providing a visual aid that
supports conceptual understanding, increases student achievement and engages the
learner. As Blake and Scanlon (2007) stated “simulations do not work on their own,
there needs to be some structuring of the students’ interactions with the simulation to
increase effectiveness” (p. 492). This AR project found that when traditional instruction
was supplemented with computer simulations students were able to successfully engage
the material at a higher cognitive level. The simulations kept the students motivated and
engaged during class time, provided that the simulation activity was deemed worthwhile
and the simulation itself was well organized and easy to use. The teacher created inquiry
activities that accompanied the simulations needed to be well constructed and have
clearly defined learner goals for students to benefit from them.
21
Some of the noted drawbacks of supplementing instruction with simulations were
that all simulations are not created equal. There is a wide range of diversity amongst
simulations found on the internet each demonstrating their own unique features, strengths
and weaknesses. It was noted by over half of the intervention group that the vector
addition simulation was “not very helpful” since it had limitations on the size of the
vectors that could be created and users were unable to input specific values for the
vectors.
Another downside to some of the simulations is that they were unhelpful in
explaining the mathematics behind most of the applicable physics concepts, in other
words they would just display the numerical values for the user. As a result, it did help
students visualize and make connections to the relationships studied in the simulation but
teacher instruction was needed to explain the mathematical process behind the principles
shown in the simulations. Although stated as a negative design drawback, this did
however promote and foster excellent class discussion and pushed students higher up
Bloom’s taxonomical levels. It seemed to engage their inquiry efforts as they wanted to
know what caused these values to change.
The simulations chosen were from three different sources and as a result had three
very different interfaces for the students to navigate. The PhET simulations, Vector
Addition and Gravitational Force Lab, provided very little guidance for the students and
were designed with a true inquiry nature in mind. The student activities did provide
minimal guidance with the attempt to encourage concept exploration by the students and
the majority of the students handled these tasks with minimal help while others struggled.
As one student commented, “if there was a guide next to the simulation to help us out
22
when we were stuck it would have been beneficial.” As stated earlier the vector addition
simulation were not favoured by the students due to the fact that the vectors had a limit to
their size and the user had difficulty manipulating the vector size making it difficult to
complete addition problems. The Gravitational Force Lab simulation however was better
received by the students as they did not encounter the frustration in manipulating the
parameters as in the vector simulation.
The second type of simulation used was designed by ExploreLearning and of the
three types the most visually appealing and seemed to be the most developed. The
Atwood Machine simulation was navigated with ease by the students and the concepts
explored were very in depth and challenging. There were numerous options, resources
and guides to assist the students and they “enjoyed the ease of use” of this simulation.
What set it apart was that it displayed concepts graphically and numerically and the
students appreciated both these displays.
The third type of simulation available through Alberta Learning were the most
dated and simplistic of the three but was still very effective in assisting the students with
meeting the learner outcomes. Although simplistic in design they were easy to collect
data and students easily saw the cause and effect changes from their manipulations. It
made their experiences with these simulations useful and constructive in nature.
Based on this study it can be concluded that computer simulations are extremely
valuable learning tools, if not necessary, to improve student learning and conceptual
understanding. They have demonstrated that they improve student achievement and have
a positive influence on student attitudes regarding problem solving. However in order to
effectively achieve these objectives consistently a complete integration of the simulations
23
throughout instructional practices is needed. Examples of how this may occur, include
students completing inquiry activities regularly, students completing pre-lab assignments
using simulations prior to a traditional lab or the replacement of traditional labs for
simulations and finally they may embedded throughout lecture based instruction in the
form of an interactive lecture.
VALUE
This action research project had a profound impact on me and my classroom. It
has introduced me to a 21st century learning environment that is highly effective in
motivating, engaging and challenging students in a unique and very accessible way.
Lesson plans now begin with locating simulations that have the potential to assist my
instruction and supplement my lessons. I have continued their use in all my classes and
have modelled this amongst my colleagues by presenting my findings at a district
professional development day to large number of science teachers. I discussed the
benefits and suggested ways to implement the use of simulations in their classroom
encouraged them to explore their use further and have received positive feedback from
many colleagues.
This project has also reinforced the need to provide meaningful instruction
through differentiation of teaching methods. Although a large majority of students
valued the simulations there were a small minority that would prefer “being taught by the
teacher” and were more comfortable using their “pencil and paper” to do physics. It
should be noted however that all students agreed that the simulations provided a
necessary visualization of the concepts which is extremely useful for an abstract subject
24
such as physics. As an experienced teacher I sometimes forget the difficulties my
students may face and assume these students can create the necessary visuals without any
assistance. It has forced me to be a more reflective teacher and cognizant of my methods
of how I present the material.
While computer simulations have a positive effect on conceptual understanding,
the research reveals many unanswered questions and potential additional studies. This
study focused just on the use of the simulations without regard to the attributes that make
a simulation beneficial to student learning and whether or not there any pitfalls or
drawbacks to using computer simulations. It also did not look at the specific design
parameters of the simulations and evaluate effectiveness of these particulars. Perhaps the
most significant and useful study would be to see what the most effective ways of
implementing computer simulations in the classroom are to improve student learning.
25
REFERENCES CITED
Adams, W. K., Reid, S., LeMaster, R., McKagan, S. B., Perkins, K. K., Dubson, M., &
Wieman, C. E. (2008). A Study of Educational Simulations Part 1--Engagement
and Learning. Journal of Interactive Learning Research, 19(3), 397-419.
Adams, W. K., Perkins, K.K., Podolefsky, N.S., Dubson, M., Finkelstein, N.D. &
Wieman, C. E. (2006). New instrument for measuring student beliefs about
physics and learning physics: The Colorado Learning Attitudes about Science
Survey. Physical Review Special Topics Physics Education Research, 2, 010101.
Bayrak, C. (2008). Effects of Computer Simulations Programs on University Students'
Achievements in Physics. Turkish Online Journal of Distance Education, 9(4),
53-62.
Blake, C. & Scanlon, E. (2007). Reconsidering simulations in science education at a
distance: features of effective use. Journal of Computer Assisted Learning, 23,
491-502.
Hestenes, D. & Halloun, I. (1995). Interpreting the Force Concept Inventory. The Physics
Teacher, 33, 502-506.
Hestenes, D., Wells, M. & Swackhamer, G. (1992). Force Concept Inventory. The
Physics Teacher, 30, 141-151.
Jimoyiannis, A. & Komis, V. (2001). Computer simulations in physics teaching and
learning: a case study on students’ understanding of trajectory motion. Computers
& Education, 36(2), 183-204.
Longfield, J. (2009). Discrepant Teaching Events: Using an Inquiry Stance to Address
Students’ Misconceptions. International Journal of Teaching and Learning in
Higher Education, 21(2), 266-271.
Kelly, J., Bradley, C. & Gratch, J. (2008). Science Simulations: Do They Make a
Difference in Student Achievement and Attitude in the Physics Laboratory?
McDermott, L.C. (2001). Oersted Medal Lecture 2001: Physics Education Research –
The Key to Student Learning. American Journal of Physics. 69(11), 1127-1137.
McKagan, S.B., Perkins, K.K., Dubson, M., Malley, C., Reid, S., LeMaster, R. &
Wieman, C.E. (2008). Developing and researching PhET simulations for teaching
quantum mechanics. American Journal of Physics, 76(4), 406-417.
Pankratz, L. (2011). Formative Assessment and Peer Feedback in Physics. Government
of Alberta.
26
Piaget, J. (1985). The Equilibration of Cognitive Structure. University of Chicago,
Chicago.
Statistics Canada (2006). Census of Population, Statistics Canada catalogue no. 97-555XCB2006057 (Strathcona County, SM Code4811052)
http://www12.statcan.gc.ca/census-recensement/2006/dp-pd/tbt/Rp (accessed
October 8, 2011).
Steinberg, R.N. (2000). Computers in teaching science: To simulate or not to simulate?
American Journal of Physics, 68(7). S37-S41.
Van Heuvelen, A. (2001). Millikan 1999: The workplace, students’ minds, and physics
learning systems. American Journal of Physics, 69, 1139-1146.
Wieman C.E., Adams W.K., Loeblein P. & Perkins K.K., (2010). Teaching physics
using PhET simulations. The Physics Teacher. In print.
Wieman C.E., Perkins K.K., Adams W.K. (2008). Oersted Medal Lecture 2007:
Interactive simulations for teaching physics: What works, what doesn't, and why.
American Journal of Physics, 76(4-5), 393-399.
Yip, D.Y. (1998). Identification of misconceptions in novice biology teachers and
remedial strategies for improving biology learning. International Journal of
Science Education, 20(4), 461-477.
Zacharia, Z. & Anderson, O.R. (2003). The effects of an interactive computer-based
simulation prior to performing a laboratory inquiry-based experiment on students’
conceptual understanding of physics. American Journal of Physics, 71(6). 618629.
Zhou, G. G., Brouwer, W., Nocente, N., & Martin, B. (2005). Enhancing Conceptual
Learning Through Computer-Based Applets: The Effectiveness and Implications.
Journal of Interactive Learning Research, 16(1), 31-49.
Zollman, D. (1996) Millikan Lecture 1995: Do they just sit there? Reflections on helping
students learn physics. American Journal of Physics, 64(2). 114-119.
27
APPENDICES
28
APPENDIX A
COMPARISON REVIEW EXAM
29
APPENDIX A: COMPARISON REVIEW EXAM
PHYSICS 20
Review Exam
NAME:
1. State the number of significant digits in each of the following.
4
a) 0.006 _____________
c) 217.000 _____________
b) 2700 _____________
d) 1.00001 _____________
2. Write the following in opposite (standard or positional) notation.
4
a) 0.00075 ____________
c) 8.1 x 10-3 _____________
b) 36 000 ____________
d) 250 x 104 (give S.N.)_____________
3. Calculate; round answers correctly. Unless otherwise stated, assume all numbers are
measurements.
a)
5
147.5 cm
+ 21.98 m
+ 567 cm
_____________
______________
b) 14.5 + 10.2 - 2.4 ____________
c) 120 candies divided among
20 students
_____________
d) (2.45 x 10-2) ÷ (4 x 10-1)
e) (12)(0.65)(18.2) ____________
4. Solve for the indicated variables; show work and round answers correctly.
5
9
a) C = (F − 32)
C = 150˚
F=?
6
b)
_______________________
v − vi
a= f
t
a = -6.0
v f = 9.00
vi = ?
5. Convert each of the following.
t = 3.5
30
a) 23 L = __________________ cL
e) 21 000 days = ___________________ s
b) 120 dam = _________________ mm f) 4 700 W = _________________ kW
8
c) 125 a (years) = ________________ h g) 245 000 N = ________________ mN
d) 1.2 Mm = ________________ dm
h) 6 x 106 g = _________________ Mg
6. Students performing a lab in physics measure the distance covered by a batterypowered toy car as it accelerates across a table top. The chart below shows distance
covered against time.
d
(cm)
t (s)
0
3.2
13
29
51
77
103
128
0
2
4
6
8
10
12
14
a) Plot a graph of the data on the grid below.
5
31
5
b) Analyze the graph to find the car’s velocity at t = 4 s. Describe the relationship
shown in the graph and show any needed constructions on the graph.
32
APPENDIX B
CLASS SURVEY
33
APPENDIX B: CLASS SURVEY
Introduction
Here are a number of statements that may or may not describe your beliefs about learning
physics. You are asked to rate each statement by circling a number between 1 and 5
where the numbers mean the following:
1. Strongly Disagree 2. Disagree
3. Neutral
4. Agree
5. Strongly Agree
Choose one of the above five choices that best expresses your feeling about the
statement. If you don't understand a statement, leave it blank. If you understand, but have
no strong opinion, choose 3.
Survey
1. A significant problem in learning physics is being able to memorize all the information
I need to know.
Strongly Disagree
12345
Strongly Agree
2. When I am solving a physics problem, I try to decide what would be a reasonable
value for the answer.
Strongly Disagree
12345
Strongly Agree
3. I think about the physics I experience in everyday life.
Strongly Disagree
12345
Strongly Agree
4. It is useful for me to do lots and lots of problems when learning physics.
Strongly Disagree
12345
Strongly Agree
5. After I study a topic in physics and feel that I understand it, I have difficulty solving
problems on the same topic.
Strongly Disagree
12345
Strongly Agree
6. Knowledge in physics consists of many disconnected topics.
Strongly Disagree
12345
Strongly Agree
7. As physicists learn more, most physics ideas we use today are likely to be proven
wrong.
34
Strongly Disagree
12345
Strongly Agree
8. When I solve a physics problem, I locate an equation that uses the variables given in
the problem and plug in the values.
Strongly Disagree
12345
Strongly Agree
9. I find that reading the text in detail is a good way for me to learn physics.
Strongly Disagree
12345
Strongly Agree
10. There is usually only one correct approach to solving a physics problem.
Strongly Disagree
12345
Strongly Agree
11. I am not satisfied until I understand why something works the way it does.
Strongly Disagree
12345
Strongly Agree
12. I cannot learn physics if the teacher does not explain things well in class.
Strongly Disagree
12345
Strongly Agree
13. I do not expect physics equations to help my understanding of the ideas; they are just
for doing calculations.
Strongly Disagree
12345
Strongly Agree
14. I study physics to learn knowledge that will be useful in my life outside of school.
Strongly Disagree
12345
Strongly Agree
15. If I get stuck on a physics problem my first try, I usually try to figure out a different
way that works.
Strongly Disagree
12345
Strongly Agree
16. Nearly everyone is capable of understanding physics if they work at it.
Strongly Disagree
12345
Strongly Agree
17. Understanding physics basically means being able to recall something you've read or
been shown.
Strongly Disagree
12345
Strongly Agree
35
18. There could be two different correct values to a physics problem if I use two different
approaches.
Strongly Disagree
12345
Strongly Agree
19. To understand physics I discuss it with friends and other students.
Strongly Disagree
12345
Strongly Agree
20. I do not spend more than five minutes stuck on a physics problem before giving up or
seeking help from someone else.
Strongly Disagree
12345
Strongly Agree
21. If I don't remember a particular equation needed to solve a problem on an exam,
there's nothing much I can do (legally!) to come up with it.
Strongly Disagree
12345
Strongly Agree
22. If I want to apply a method used for solving one physics problem to another problem,
the problems must involve very similar situations.
Strongly Disagree
12345
Strongly Agree
23. In doing a physics problem, if my calculation gives a result very different from what
I'd expect, I'd trust the calculation rather than going back through the problem.
Strongly Disagree
12345
Strongly Agree
24. In physics, it is important for me to make sense out of formulas before I can use them
correctly.
Strongly Disagree
12345
Strongly Agree
12345
Strongly Agree
25. I enjoy solving physics problems.
Strongly Disagree
26. In physics, mathematical formulas express meaningful relationships among
measurable quantities.
Strongly Disagree
12345
Strongly Agree
36
27. It is important for the government to approve new scientific ideas before they can be
widely accepted.
Strongly Disagree
12345
Strongly Agree
28. Learning physics changes my ideas about how the world works.
Strongly Disagree
12345
Strongly Agree
29. To learn physics, I only need to memorize solutions to sample problems.
Strongly Disagree
12345
Strongly Agree
30. Reasoning skills used to understand physics can be helpful to me in my everyday life.
Strongly Disagree
12345
Strongly Agree
31. We use this statement to discard the survey of people who are not reading the
questions. Please select agree-option 4 (not strongly agree) for this question to preserve
your answers.
Strongly Disagree
12345
Strongly Agree
32. Spending a lot of time understanding where formulas come from is a waste of time.
Strongly Disagree
12345
Strongly Agree
33. I find carefully analyzing only a few problems in detail is a good way for me to learn
physics.
Strongly Disagree
12345
Strongly Agree
34. I can usually figure out a way to solve physics problems.
Strongly Disagree
12345
Strongly Agree
35. The subject of physics has little relation to what I experience in the real world.
Strongly Disagree
12345
Strongly Agree
36. There are times I solve a physics problem more than one way to help my
understanding.
Strongly Disagree
12345
Strongly Agree
37
37. To understand physics, I sometimes think about my personal experiences and relate
them to the topic being analyzed.
Strongly Disagree
12345
Strongly Agree
38. It is possible to explain physics ideas without mathematical formulas.
Strongly Disagree
12345
Strongly Agree
39. When I solve a physics problem, I explicitly think about which physics ideas apply to
the problem.
Strongly Disagree
12345
Strongly Agree
40. If I get stuck on a physics problem, there is no chance I'll figure it out on my own.
Strongly Disagree
12345
Strongly Agree
41. It is possible for physicists to carefully perform the same experiment and get two very
different results that are both correct.
Strongly Disagree
12345
Strongly Agree
42. When studying physics, I relate the important information to what I already know
rather than just memorizing it the way it is presented.
Strongly Disagree
12345
Strongly Agree
38
APPENDIX C
VECTOR ADDITION ACTIVITY
39
APPENDIX C: VECTOR ADDITION ACTIVITY
USING THE PhET SIMULATION: VECTOR ADDITION
Student Learning Outcomes
20-A1.4s –use appropriate numeric, symbolic, graphical and linguistic modes of
representation to communicate ideas, plans and results
20-B1.6k – calculate the resultant force, or its constituents, acting on an object by adding
vector components graphically and algebraically
20-B1.3s – use free-body diagrams to describe the forces acting on an object
Student Instructions
1. Go to the following website:
http://phet.colorado.edu/sims/vector-addition/vector-addition_en.html
2. Click “Run Now!” to get the simulation loaded.
3. Take 5 minutes to explore the simulation to get comfortable and familiar with the
controls.
4. In the simulation, a vector is described by four measurements: |R|, Ө, R x , and R y. This
R (vector) can represent velocity, displacement and/or force. Put a vector in the work
area, and then analyze what these four things represent. Describe in your own words
what the measurements represent and what “component” means.
5. Using the simulation determine the vertical and horizontal components of each
vector; include a sketch:
a) 4.0N @ 45o
b) 2.60 kN @ 195o
c) 8.0 N @ 290o
d) 5.6 N @ 180o
6. Now you are going to learn how to add vector quantities in physics. A vector can be
represented graphically by an arrow of a certain length and direction, just like a vector
quantity has a magnitude and direction (usually expressed in degrees). Vectors can be
added together, graphically and algebraically to produce a vector sum or resultant. The
resulting diagram is known as a vector addition diagram. To have the simulation assist
you in this endeavour grab an arrow from the bucket. The length of the vector is found in
40
the |R| box. The angle of the vector is in the θ box. Place the vectors you wish to add
head to tail. To get the resultant vector, hit the big “SUM” button. Move the green sum
vector so that the tail touches the tail of your first vector.
Example of two dimensional vector diagram (note labels are missing a proper vector
addition diagram includes labels for each arrow and the angle is also stated):
7. Use the simulation to help you determine the net force acting on the objects in the
following situations. As part of your response to each question include a sketch of the
vectors, include a free-body diagram and labeled vector addition diagram and determine
the resultant, including direction, using the simulation and algebraically.
a) force of 14 N, north and 13 N, north is applied to an object at rest.
b) force of 13.7 N, down and 12.0 N, up and 10.5 N, down is applied to a resting object.
c) A car is stuck in a snow drift. Bob and Jane attach two ropes to the vehicle and try to
pull it out by pulling in the same direction. Bob pulls with a force of 17N while Jane
pulls with a force of 12 N. If there is a force of friction of 4.0 N acting on the car
determine the net force.
d) In a tractor pull, four tractors are connected by strong chains to a heavy load. The load
is initially at rest. Tractors A and B pull with forces of 15.0 kN [E] and 14.0 kN [E]
respectively. Tractors C and D pull with forces of 14.5 kN [W] and 13.5 kN [W]
respectively. The magnitude of the force of friction exerted by the ground on the load is
10.0 kN.
e) If two forces act on an object, state the angle between these forces that will result in
the net force given below. Explain using sketches.
(i) maximum net force
(ii) minimum net force
f) A force of 17.0 N, north and a force of 14.0 N, east act on a box.
g) A force of 21 N south and a force of 23 N east act on an object.
h) The total weight of a biker and her motorbike is 1800 N [down]. With the engine
engaged, the force of friction exerted by the road on the tires is 500 N [forward]. The air
41
resistance acting on the biker and bike is 200 N [backward]. The normal force exerted by
the road on the biker and bike is 1800 N [up].
i) A force of 13.5 N, 180o and a force of 22.0 N, 90o act on an object.
j) Explain in your own words how you draw a vector addition diagram.
42
APPENDIX D
FLETCHER’S TROLLEY ACTIVITY
43
APPENDIX D: FLETCHER’S TROLLEY ACTIVITY
Physics 20: Exploring Acceleration, Net Force and Mass Relationships
Part 1: Acceleration Observed
Imagine two blocks connected by a rope. Now, imagine that one of the blocks is hung
over the edge of a table via a pulley. What would happen to the blocks if they were free
to move? Would both blocks begin to accelerate, and if so would they accelerate at the
same rate if the rope does not stretch? The apparatus used to answer such questions is
known as Fletcher's Trolley. We will investigate these questions using a simulated
Fletcher's Trolley.
The applet will be used to observe the acceleration of two blocks on Fletcher's Trolley.
a. Click "Reset" ( ). The lower edge of block 2 will then be at elevation h =
1.30 m, and the yellow platform at h = 0 m, as in Figure 1.
Figure 1
The masses of the blocks will be:
m 1 = 600 g (this cannot be changed)
m 2 = 400 g
The pulley's mass will be zero. These mass values will be assumed in all of the
following explanations, except where otherwise noted.
44
b. Click on block 1 and drag it until block 2 is at elevation h = 3.00 m. Maximize
( ) the applet window if you are not able to drag block 1 far enough to the left.
c. Click "Play" ( ) and observe the motion of the blocks. Describe the motion of
the blocks using the terms speed, time, and acceleration.
The acceleration of the blocks can be determined by calculating the slope of a
velocity vs. time graph. Click "Replay" ( ) and click "Step Forward" ( ) to move
slowly through the motion. Record the velocity at each of the following times in the
table below.
a. The time and velocity data is found on the left side of the applet display
panel. Using this data, construct a velocity vs. time graph.
time (t) s
velocity (v) m/s
0.00
0.0
0.04
0.08
0.12
0.16
0.20
0.24
0.28
0.32
0.36
45
b. Using graphical analysis, determine the acceleration of the trolley. Relate the
slope to a physics equation algebraically(remember the definition of acceleration
from Science 10).
46
c. The constant slope indicates that the acceleration is constant. Compare your
value with that shown by the applet (a = 3.92 m/s2).
d. Explain why would one expect the accelerations of the blocks in Fletcher's
Trolley to be constant?
Part 2: How is the acceleration of an object related to the net force acting on the
object?
Hypothesis
State a hypothesis relating acceleration and net force using and if/then statement.
Variables
Identify the controlled, manipulated and responding variables for your procedure.
Materials
Fletcher’s Trolley Simulation
Procedure
With a partner design a procedure that allows you to identify the relationship between net
force and acceleration. Remember in a lab multiple trials are needed to ensure accuracy
and a graph of the results is expected in order to visually represent the relationship.
47
APPENDIX E
ATWOOD MACHINE ACTIVITY
48
APPENDIX E: ATWOOD MACHINE ACTIVITY
This activity can be accessed from the following website:
http://www.explorelearning.com/index.cfm?method=cResource.dspDetail&ResourceID=
523
49
APPENDIX F
INCLINED PLANE, FRICTIONLESS ACTIVITY
50
APPENDIX F: INCLINED PLANE, FRICTIONLESS ACTIVITY
Physics 20: Inclined Plane, Frictionless Simulation
Inclined Plane, Frictionless simulates the motion and forces acting on a mass moving
down a smooth, frictionless incline.
Prerequisites
Students should be familiar with the concepts of weight and normal force. Students
should also have a working knowledge of free body diagrams and vector component
analysis.
Learning Outcomes
•
•
Students will be able to construct a free body diagram and determine the net force
acting on an object resting on an incline plane.
Students will be able to calculate the normal force, weight, and weight
components acting on an object on a frictionless incline.
Instructions
Students should understand the applet functions that are described in Help and ShowMe.
The applet should be open. The step-by-step instructions on this page are to be done in
the applet. You may need to toggle back and forth between instructions and applet if your
screen space is limited.
1. Free Body Diagram and Analysis
Free body analysis can be used to determine the observed or net acceleration of an object
that has multiple forces acting on it. For example, consider the case of a box of crayons
resting on a frictionless incline, which is 30° to the horizontal. The box of crayons will
accelerate down the incline at a rate that is determined by the forces acting on it. The
applet will be used to show these forces.
On the applet, click the "Show FBD" check box (
) and the "Show FBD
51
Components" check box (
) to display all of the forces. You
can clearly see two forces acting on the box:
•
•
gravitational force acting straight down
normal force acting at right angles to the plane of the incline
Sketch and label these two forces on Figure 1 to the right.
Figure 1
On the applet, click the "Show FBD" check box (
) and the "Show FBD
Components" check box (
) to display all of the forces. Try to
reproduce a FBD similar to Figure 2. Define the following vectors:
Figure 2
a. Normal force (N):
52
b. Weight (W):
Note that Ff indicates the force of friction is zero in this example. Also note that the
weight force has been resolved into two components: one component is opposite the
normal force while the other is parallel to the incline. Assume that the "x-direction"
is parallel to the incline and that the "y-direction" is perpendicular to the incline.
In this diagram, one of the forces is "balanced" by a component of the other. Identify
these forces.
__________ = __________
In the configuration shown to the right, will the normal and weight forces add to give
a net force of zero? If not, which force (or component of force) is not balanced by
another force?
________________________
Detailed information about the forces is found in the upper right corner of the
drawing panel. From the FBD we conclude that there is:
•
•
a component of the weight that acts perpendicular to the incline, given by the
expression Wy = (W)(cosθ)
a component of the weight that acts parallel to the incline, given by the
expression Wx = (W)(sinθ)
53
Figure 3
Verify that the magnitude of the components, as given by the applet, are correct.
Wy =
Wx =
2. The Normal Force
The incline must exert a force on the box of crayons; otherwise, it would "fall
through" the surface. This force is the normal force, and it is always directed
perpendicular to the surface. Based on Figure 3, the normal force is equal in
magnitude to the component of the object's weight that is perpendicular to the
surface of the incline (Wy). The applet will be used to investigate how the magnitude
of the normal force changes as the angle of the incline is varied.
Set the applet up similar to the Figure 4.
54
Figure 4
a. As the angle of inclination increases, the magnitude
of the normal force _______________.
b. At any angle of incline the magnitude of the normal
force is always equal to _________________.
3. Questions and Problems
On the incline below, draw a free body diagram for a block on an
incline at a 40° angle. Carefully label the incline angle, normal force,
weight, component of weight perpendicular to the surface and the
component of the weight acting parallel to the surface.
55
Calculate the magnitude of the normal force from Exercise 7 if the block has a mass
of 1.00 kg. Show your work.
Hint: use the applet to verify your calculations if you "scale" the applet output by
multiplying by the correct scale factor. The applet uses a 0.100 kg mass; the block
mass is 1.00 kg, so the scale factor is 10.
Identify, using your FBD from Exercise 7, which force will cause the 1.00 kg mass
to accelerate if released?
a. Calculate the magnitude of this force.
b. Calculate the acceleration of the mass using Newton's second law (F net = ma).
Using the equation from Exercise 9a and Newton's second law (F net = ma), derive an
equation that can be used to calculate the acceleration of any mass on a frictionless
incline based only on the acceleration due to gravity and the incline angle.
Use the following information to answer the question below.
"The Normal Force is always equal to the weight of the object. It's just the
reaction of a surface to an object's weight."
If the statement is false, correct it so that it is true. If the statement is true, explain
why it is true.
56
APPENDIX G
FRICTION ACTIVITY
57
APPENDIX G: FRICTION ACTIVITY
Friction Simulation – Physics 20
Friction simulates the force exerted on a spring (force) scale as it pulls a stack of
books across a rough table surface in order to explore the difference between kinetic
and static friction.
Prerequisites
Students will require a working knowledge of normal force, weight, free body diagrams,
and graphical analysis.
Learning Outcomes
Students will be able to graphically determine an expression for kinetic friction and
calculate kinetic, static and rolling friction in a variety of situations. Students will also be
able to qualitatively and quantitatively compare kinetic, static, and rolling friction.
Instructions
Students should understand the applet functions that are described in Help and ShowMe.
The applet should be open. The step-by-step instructions on this page are to be done in
the applet. You may need to toggle back and forth between instructions and applet if your
screen space is limited.
Contents
1.
2.
3.
4.
5.
Comparing Kinetic and Static Friction
Developing an Expression for Kinetic Friction
Summarizing the Force of Friction
Calculating Frictional Force - Examples
Problem Solving
58
1. Comparing Kinetic and Static Friction
The applet will be used to demonstrate the difference between Kinetic and Static
Friction.
On the applet, stack the five books that are attached to the force scale as shown
below.
a. Using the mouse, slowly pull on the open ring of the force scale and observe the
reading on the scale just as the stack of books begins to move.
What is the maximum force applied before the books start to move? ________ N
b. Once the books begin to move, the force required to keep the books moving is
reduced.
What is the applied force required to keep the books moving? _________ N
Before the stack of books begins to move, the force of friction is called Static
Friction. After the motion begins, the stack of books is subject to Kinetic
Friction. In your own words, describe the relationship between the size of the
Static Frictional Force and the Kinetic Frictional Force.
Click "FBD" ( ) to display the FBD drawing. In Figure 1, the red vector
represents the frictional force (F f ) while the brown vector represents the applied
force (F). Describe the behavior of the FBD as you pull on the force scale.
59
Figure 1
a. What happens to the size of the static frictional force as you start to pull on the
force scale?
b. Is there a maximum size for the static frictional force? If so, what happens to the
object if the applied force exceeds the maximum static frictional force?
c. Is there a minimum size for the static frictional force? If so, under what
conditions will the minimum static frictional force be observed?
d. What type of frictional force acts when the system is at rest?
2. Developing an Expression for Kinetic Friction
The force of friction arises from an interaction between surfaces. In the case of the books
and rough table surface, the table surface exerts a force on the bottom book. This force is
the normal force (F N ) and is represented in blue on Figure 1. Opposing the normal force
is the object's weight. The weight (W) is represented in green on Figure 1. For the books
resting on the table, the normal force is equal in magnitude to the weight. The normal
force and weight are "balanced". The magnitude of the normal force can be calculated by
equating it to the weight. For example,
FN = W
F N = mg
60
Even though friction is an extremely complex phenomenon, there is a very simple
relationship between the magnitude of the frictional force and the normal force.
a. Using the applet, measure the applied force required to keep the books moving and
complete the following table. To calculate the normal force, assume that each book has a
mass of 1.00 kg.
Number of
Books
Normal Force (N)
F N = mg
Kinetic Frictional Force (N)
1
_________
_________
2
_________
_________
3
_________
_________
4
_________
_________
5
_________
_________
6
_________
_________
7
_________
_________
8
_________
_________
9
_________
_________
10
_________
_________
b. Using graphical analysis, determine the coefficient of kinetic friction (μ) for the book
- table interface. As part of your response, complete the data table above, provide a
graph of the responding variable as a function of manipulated variable, determine the
slope of your graph, and relate the slope algebraically to a physics equation. State all
necessary physics concepts and formulas.
3. Summarizing the Force of Friction
Frictional forces are complicated. They depend not only on the two objects involved but
also their conditioning at the moment of the interaction of the two objects. For example,
roads made of asphalt become very slippery when freezing rain or snow covers the
61
surface and tires lose their grip when they are worn. Furthermore, even if all these
circumstances are fixed, the frictional force also depends on whether an object rolls,
slides (kinetic), or is stationary (static) with respect to the other surface.
This gives rise to three basic forms of friction:
Kinetic Friction
Static Friction
When an object slides, it experiences
a frictional force.
When an object is at rest a static
frictional force resists motion.
Kinetic frictional force always
opposes motion. It acts opposite the
direction of motion.
The maximum static frictional forces
are larger than the kinetic frictional
forces.
μ k and μ s are the coefficient of rolling, kinetic, and static friction and F N is the normal
force.
4. Calculating Frictional Force - Examples
1. The coefficient of kinetic friction between a block and the level surface it slides on
is 0.45. If the mass of the block is 10.0 kg, what is the minimum force needed to
keep the block moving with uniform motion?
62
The applied force need only balance the kinetic frictional force in order to maintain
uniform motion.
2. A student pulls on a 5.00 kg object and discovers that she needs to exert 30.0 N of
force before the object moves. What is the coefficient of static friction between the
object and the surface on which it rests?
Since the applied force is 30.0 N just before moving, the frictional force must be
equal in size. Therefore,
63
3. A 7.30 kg box is at rest on a level table. The coefficient of static friction between
the box and table is 1.03. How big is the static frictional force?
There is no static frictional force acting since there is no net force attempting to
move the box . The static frictional force could, at most, be equal to u static F N .
5. Problem Solving
A student drew the free body diagram for a box sitting at rest on the floor. Explain what
is wrong with this diagram.
64
Exercise 9
The coefficient of static friction between a book and the level surface it slides on is 0.65.
If the mass of the book is 2.0 kg, determine the minimum applied force required to move
the books?
An engine provides 300.0 N of force to keep a 1600 kg vehicle moving at a uniform
speed (air resistance is negligible). What is the coefficient of rolling friction between the
tires and the road surface?
A 100.0 kg crate is at rest in the back of a truck. If the coefficient of static friction
between the crate and the truck bed is 0.30, what is the maximum acceleration that the
truck can have before the crate begins to slide? Draw a Free Body Diagram and explain
what force causes the crate to accelerate along with the truck.
Anti-lock brakes prevent car tires from locking up and skidding. Explain why a car can
stop faster and safer if the tires do not skid.
65
APPENDIX H
GRAVITY FORCE LAB ACTIVITY
66
APPENDIX H: GRAVITY FORCE LAB ACTIVITY
Student objectives:
•
•
Design 2 experiments that allow you to derive an equation that relates mass,
distance, and gravitational force.
Use graphical analysis to determine the universal gravitational constant.
Your report must include the following parts:
•
•
•
•
•
•
Purpose
Hypothesis
Procedure
Observations
Analysis – must include a graph for each experiment and your graphical analysis
must relate the slope to the equation
Evaluation
67
APPENDIX I
VECTOR QUIZ
68
APPENDIX I: VECTOR QUIZ
Physics 20 – Vector Addition/Equilibrium Quiz
Name:____________________
1. Describe the difference between a scalar and vector quantity, provide an example of
each. (4)
2. Explain how you draw a vector diagram. (3)
3. Determine the resultant for each vector sum, including magnitude and direction using
a standard position angle (Cartesian system). As part of your response draw a free-body
diagram, sketch a vector addition diagram and state all necessary physics principles and
formulas.
a) a force of 5.0 N, north and a force of 8.0 N, south act on an object. (10)
b) F 1 =32.0 N at 38.0o and F 2 =16.0N at 340o (10)
4. The diagram below shows a crane equipped with a wrecking ball of weight 9000N.
The ball is suspended from cable A and pulled away from the vertical by a horizontal
cable B to the position shown. If the ball is in equilibrium determine the tension in each
cable. As part of your response draw a free-body diagram, sketch a vector addition
diagram and state all the necessary physics principles and formulas. (8)
50˚
Cable A
Wrecking ball
Cable B
69
APPENDIX J
NEWTON’S LAWS QUIZ
70
APPENDIX J: NEWTON’S LAWS QUIZ
PHYSICS 20: Newton’s Law Quiz
NAME:
1.A sign with a weight of 250 N is suspended from
two supporting cables A and B as shown.
Determine the tension force in each cable. As
part of your response sketch a labeled free
body diagram and state all necessary physics
concepts, formulas and substitutions. (9 marks)
60.0˚
Cable B
Magazines
Cable A
2. A student inflates a balloon, and then releases the neck with the balloon parallel to
the ground. The balloon, which has an initial mass (including air) of 0.0550 kg,
moves forward horizontally with an initial acceleration of 7.50 m/s2. The force of
air resistance acting against the balloon's motion initially equals 0.400 N.
• Explain, using one of Newton's laws of motion, why the balloon moves.
Be sure to state the law you used.
• Determine the net force that moves the balloon forward.
• Determine the force exerted by the escaping air on the balloon – the
applied force.
As part of your response sketch a labeled free body diagram and state all necessary
physics concepts, formulas and substitutions. (10 marks)
71
3. The go-carter shown below left is just rounding a sharp left-hand turn on a
horizontal track. His position (point A) is sketched on the track diagram below
right.
C
A
D
B
Oil
•
Just ahead of the go-cart is a patch of oil on the track. On the track sketch
an arrow to show the likely direction taken by the go-cart as friction
between the cart’s tires and the track drops effectively to zero due to the
oil. (1 mark)
•
Use one or more of Newton’s laws to explain what happens in part (a).
State the law you used in your response. (3 marks)
•
On the previous (oil-free) lap, the go-cart accelerated along the
straightaway at B at 6.50 m/s2. If the go-cart and rider have a total mass of
180 kg, determine the net force was needed to cause this acceleration? (4
marks)
•
The actual force applied by the tires of the go-cart to the track during the
acceleration in part (c) was 1680 N. Determine the force of friction (air
resistance, rolling friction) acting against the motion of the go-cart. (3
marks)
•
As the cart approached turn D, the driver over-braked and locked up all
four wheels. The cart slowed down at 14.5 m/s2. Determine the
coefficient of kinetic friction for the go-cart’s tires sliding on the asphalt
track. (3 marks)
4. A car with a mass of 1700 kg accelerates at a rate of 1.70 m/s2. The magnitude of
the force of friction opposing the motion of the car is 950 N.
72
• Determine the horizontal force the car's tires exert on the roadway. (3
marks)
• Is the force you found in part (a) the force that moves the car forward?
Discuss, making reference to one of Newton’s laws of motion. (3 marks)
Board
Book
5. The book shown below has
a weight of 5.40 N, and it is stationary on a board that is angled at 15.0˚ to the
horizontal.
• Determine the normal force on the book (perpendicular force between book and
board) and the force of friction.
• Describe what is going to happen to the book if the angle of the board is
increased.
As part of your response sketch a labeled free body diagram, sketch a vector addition
diagram and state all necessary physics concepts, formulas and substitutions. (12 marks)
6. A force of 25.3 N, north and 12.4 N, west act on a box. Determine the net force on
the box.
Marks will be awarded based on your vector diagrams, the physics that you use,
and the mathematical treatment you provide. (10 marks)
73
APPENDIX K
GRAVITATIONAL FORCES AND FIELDS QUIZ
74
APPENDIX K: GRAVITATIONAL FORCES AND FIELDS QUIZ
PHYSICS 20
Gravity QUIZ
NAME:
1. A space traveler on a distant planet measures
gravitational field strength using the apparatus sketched
at right. What does she determine as the value of local
gravity on the planet? (3)
0
NEWTONS
10
20
12.5 N
1.50
kg
___________________________
2. The sketch at right shows the planet Mars.
a)
Use the
diagram at right to sketch the gravitational field
around Mars. (1)
b)
Explain the
meaning of the term field as used in science. Give an
example of a vector field other than gravity; of a
scalar field. (4)
MARS
c)
Mars has a mass of 6.42 x 1023 kg and a
radius of 3.40 x 106 m (that is, at the surface of the planet you would be 3.40 x 106
m from Mars’ centre.) Find the gravitational field strength on Mars’ surface. (3)
d)
If you have a mass of 55.0 kg, what would
you weigh on the surface of Mars? (3)
75
3. A lunar exploration vehicle has a weight on earth of 3500 N. It is sent to the moon,
where g = 1.62 N/kg.
a)
What will the vehicle weigh on the moon?
(3)
b)
What is the mass of the vehicle on the
moon? (3)
4.Two supertankers, each of mass 2.45 x 108 kg, are moored (tied together) with their
centres 50.0 m apart.
a)
Find the gravitational force of attraction
between the two supertankers. (3)
b) If the mooring of one tanker breaks and friction is neglected, at what rate will this
tanker accelerate towards the second one? (4)
5. Use the sketches to find the force of gravitational attraction between each pair of
spheres. The value of F g is given for the first pair. Force vectors are not drawn to
scale. (3)
Fg
Fg
m
F g = 1.00 mN
m
Fg
Fg
m
_________________
Fg
m
_________________
Fg =
m
Fg
2m
Fg =
76
Fg
Fg
Fg =
m
_________________
0.5m
6. Find the net gravitational force (magnitude and direction) acting on m 1 in the
sketch below; assume no other forces act. As part of your response, draw a free
body diagram, vector diagram, state your directional logic and state all formulas
and physics principles. (10)
m2 = 40 000 kg
m3 = 60 000 kg
m1 = 4 000 kg
100 m
75.0 m
7. Determine the net gravitational field at point P produced by the two 50 kg
masses shown below. As part of your response, draw a situational diagram, vector
diagram, state your directional logic and state all formulas and physics principles
used.(10)
5.00 m
5.00 m
P
77
APPENDIX L
SUMMATIVE UNIT EXAM
78
APPENDIX L: SUMMATIVE UNIT EXAM
Physics 20 Unit 2 Exam
This exam includes 21 multiple-choice questions (worth one mark each) and 6
numerical response questions (worth one mark each). The exam also includes written
response questions worth 16 marks, for a total raw score of 43 marks.
YOU MAY WRITE ANYWHERE IN THIS BOOKLET.
YOU MAY USE A PHYSICS 20 DATA SHEET ON THIS EXAM.
 PLEASE WRITE YOUR NAME ON THE ANSWER SHEET AND THIS
BOOKLET.
 You may use a calculator on this exam; if it is a graphing calculator, it may be
cleared by your teacher as the exam begins. REMEMBER THAT NO MUSIC
SOURCES ARE ALLOWED DURING THE EXAM; no earbuds, please!
 All answers for multiple-choice questions should be entered on the multiple
choice answer sheet; multiple-choice questions are worth one mark each.
 All answers for numerical response questions should be entered in the appropriate
section on the multiple-choice answer sheet. Numerical response questions are
worth one mark each. Your answer must be a POSITIVE number; the first digit
should be entered in the furthest LEFT BOX of the answer blank. If your answer
has a decimal value as well as a whole number value, it should be in the form 1.23
or 12.3. If your answer is only a decimal value, it should be in the form 0.12 –
include the leading zero.
 Marks for written response questions are given with each question. For written
response questions, be sure you have included a formula statement (if needed),
shown correct rearrangement and substitution into the formula (if needed), stated
an unrounded answer, and given a correctly rounded, final answer including
appropriate units. If a question requires a vector diagram, be sure it is correctly
labeled.
Do your best on this exam and good luck!
79
1. What is the difference between a scalar quantity and a vector quantity?
A. A scalar quantity has no direction whereas a vector quantity has a direction.
B. A scalar quantity is used in the study of kinematics whereas a vector quantity is
used in the study of dynamics.
C. A scalar quantity has a magnitude and a direction whereas a vector quantity has
only a magnitude.
D. A scalar quantity has magnitude, units, and a direction whereas a vector
quantity has only magnitude and units.
2. As sketched at right, what forces are acting on the pail when hung
from a spring scale supported by a hand?
A. the force of gravity [down] only
B. the elastic force of the spring [up] only
C. both the force of gravity [down] and the elastic force
of the spring [up]
D. the force of gravity [down], the elastic force of the
spring [up], and the force of the hand [up]
3. A stationary block is at rest on a rough
inclined plane, as shown. If äFg is the
force of gravity, äFN is the normal force,
and äFf is the force of friction, which freebody diagram below is correct?
A.
C.
B.
D.
80
4. Two people, A and B, are dragging a
canoe across a level beach using light
ropes. Person A applies a force of 40.0 N
and person B applies a force of 80.0 N.
The force of friction exerted by the beach
on the canoe is 100 N. What is the net
force on the canoe?
A. 220 N [forward]
B. 220 N [backward]
C. 20.0 N [forward]
D. 20.0 N [backward]
5. Which of the following statements is correct for an object moving horizontally at a
constant velocity?
A. The object has a constant net force greater than zero acting on it.
B. The force of gravity acting on the object is zero.
C. All the horizontal forces acting on the object balance each other.
D. The normal force acting on the object is zero.
6. Which of the following is the best description of inertia?
A. Inertia is the property of an object that resists velocity.
B. Inertia is the property of a body that resists acceleration.
C. Inertia is the property of an object that resists motion.
D. Inertia is another name for the weight of an object.
7. While moving horizontally forward at
constant velocity on a snowmobile, the
rider throws a ball straight up so that it
reaches a height of 5 m. Ignoring air
resistance, where will the ball land?
A. back in the rider’s hand
B. in front of the rider’s hand
C. behind the rider’s hand
D. behind the snowmobile
8. An object is given an acceleration of 2.50 m/s2 [60°] by a net force of 5.00 N [60°].
The mass of the object is:
A. 0.500 kg
C. 12.5 kg
B. 2.00 kg
D. 7.50 kg
Numerical Response
Enter your answer in the space provided on the answer sheet.
1. A girl is pushing a 500-kg refrigerator across a level floor. She exerts a constant force
of 200 N to maintain a velocity of 0.100 m/s [270°]. When the girl stops pushing, the
refrigerator will come to rest in a time of ______ s. (Record your decimal answer in the
correct space on the answer sheet.)
81
9. A light rope is used to lift a 10-kg mass and give it an acceleration of 2.0 m/s2 [up].
What is the net force?
A. 10 N [up]
C. 1.0 × 102 N [up]
B. 20 N [up]
D. 1.2 × 102 N [up]
10. A force of 300 N applied to a stove on a kitchen floor produces an acceleration of
5.00 m/s2. If the magnitude of the frictional force is 100 N, what is the mass of the stove?
A. 20.0 kg
B. 80.0 kg
C. 60.0 kg
D. 40.0 kg
Numerical Response
Enter your answer in the space provided on the answer sheet.
2. An 8.00-kg oak block, X, on a horizontal, rough oak surface is attached by a light
string that passes over a light, frictionless pulley to a hanging 4.00-kg mass, Y as
sketched at right. The magnitude of the force of friction on block X is 24.0 N. The
magnitude of the acceleration of the system is ______ m/s2. (Record your three-digit
answer in the correct space on the answer sheet.)
11. Action and reaction forces always occur in pairs. They do not result in a net force of
zero because
A. the action and reaction forces act on different objects
B. the action force is greater than the reaction force
C. the action and reaction forces act in the same direction
D. the reaction force acts after the action force
Numerical Response
Enter your answer in the space provided on the answer sheet.
3. It takes a force of 64 N to start a 4.0 kg copper block sliding on a dry horizontal
copper surface. The coefficient of static friction between the copper block and the copper
surface is equal to ______. (Record your two-digit answer in the correct space on the
answer sheet.)
Numerical Response
Enter your answer in the space provided on the answer sheet.
82
4. Match the number of each type of force above with its description given below.
(Record all four digits of your answer on the answer sheet.)
Types of Forces
1 Net force
2 Friction force
3 Applied force
4 Normal force
Force that acts perpendicular to a common
surface
Vector sum of all forces acting on an object
Force that opposes an object’s motion
Force that acts parallel to a common surface
__ (Record in the first column.)
__ (Record in the second column.)
__ (Record in the third column.)
__ (Record in the fourth column.)
12. Which statement is correct for the gravitational mass of an object?
A. The gravitational mass of an object is different on the surface of the Moon than
on the surface of Earth.
B. The gravitational mass of an object is numerically equal to its weight but has
different units.
C. The gravitational mass of an object is measured by comparing its weight to that
of a standard mass.
D. The gravitational mass of an object is measured using a calibrated spring
balance to accelerate the object.
13. The gravitational force of attraction between two spheres of mass 2.0 kg each, whose
centres are separated by 2.0 m, is
A. 4.0 N
C. 2.0 × 6.7 x 10–11 N
B. 6.7 x 10–11 N
D. 4.0 × 6.7 x 10–11 N
14. Two students are sitting in a school cafeteria eating lunch, separated by a distance ∆d.
They move so that the distance between them is now one-quarter as great as before. The
force of gravitational attraction between them is now
A. one-sixteenth as great
C. four times greater
B. one-quarter as great
D. sixteen times greater
15. A physics student stands on a bathroom scale, calibrated in newtons, while riding in
an elevator. How will the reading on the bathroom scale compare to the normal reading
for the following sequence of the elevator’s motion?
Elevator starts to descend; elevator descends at constant velocity; elevator stops
descending.
A. heavier; normal; heavier
C. heavier; normal; lighter
B. lighter; normal; heavier
D. lighter; normal; lighter
83
Numerical Response
Enter your answer in the space provided on the answer sheet.
5. In 1971, Alan Shepard became the first astronaut to golf on the Moon. If the Moon’s
gravitational field strength is 1.62 N/kg, the weight of a 45.0-g golf ball on the Moon is
a.bc x 10-d N. The values of a, b, c, and d are ____, ____, ____ and ____. (Record all
four digits of your answer on the answer sheet.)
16. Which of the following statements about gravitational force, Fg, is not correct?
A. Gravitational force is an attractive force only; it is never repulsive.
B. Gravitational force is the weakest of the fundamental forces.
C. Gravitational forces vary directly with the masses of objects.
D. Gravitational forces vary inversely with the distance between objects.
17. Based on the experiment sketched at right, the local
value of g is
A. 16.0 N/kg
B. 32.0 N/kg
C. 64.0 N/kg
D. 10.0 N/kg
0
NEWTONS
20
40
32.0 N
2.00
kg
18. A student has a true weight of 608 N. While riding in an elevator, he experiences an
increase in his weight of 50.0 N. At that moment, the motion of the elevator is
A.
B.
C.
D.
A constant upwards velocity of 5.10 m/s
A constant downwards velocity of 5.10 m/s
An acceleration upwards of 0.807 m/s2
An acceleration downwards of 0.807 m/s2
19. Which of the following graphs best represents the gravitational field strength, g,
versus distance from the earth’s centre, r?
A.
C.
84
B.
D.
20. An astronaut experiences a force of gravity on Earth of 800 N. Neptune has 17 times
the mass and 3.9 times the radius of Earth. What (approximately) would the astronaut
weigh, in newtons, on Neptune?
A. 800 × 17
C. 800 × 17
3.9
15
B. 800 × 3.9
D. 800 × 15
17
17
21. Two bags of identical steel bearings are suspended one metre apart. Which of the
following changes would double the gravitational force that one bag exerts on the other?
A. doubling the number of bearings in one bag
B. doubling the number of bearings in both bags
C. decreasing the separation of the bags by one-half
D. decreasing the separation of the bags by one-quarter
Use the information below to answer the next two questions.
The planet Uranus has a mass of 8.68 x 1025 kg and a radius of 2.56 x 107 m.
Written Response
Be sure to state formulas as needed, show your work, use correct notation and correctly
round final answers.
22. Determine the gravitational field strength on the surface of Uranus. (2 marks)
______________________________
Numerical Response
Enter your answer in the space provided on the answer sheet.
85
6. On the surface of Uranus, an astronaut with a mass of 85.0 kg would have a weight of
______ N. (Record your three-digit answer on the answer sheet.)
Written Response
Be sure to state formulas as needed, show your work, use correct notation and correctly
round final answers.
23. A student tests the acceleration of his 950-kg automobile, and finds that it can go
from 0 to 100 km/h (27.8 m/s) in 8.52 s. The engine provides an applied force of 10.7 kN
(200 hp).
a) Find the car’s acceleration. (2 marks)
______________________________
b) What is the average force of friction in this case? (2 marks)
______________________________
c) Without changing the force of the engine, what could be done to increase the
acceleration of the car? (1 mark)
24. Following a freezing rain, a child with a mass of 32.0 kg runs and slides on a
horizontal driveway that is coated with ice. The child runs with a speed of 2.50 m/s,
slides, and slows down at 0.900 m/s2 before finally stopping.
a) How far does the child slide? (2 marks)
b) What is the coefficient of kinetic friction between the child’s shoes and the driveway?
(2 marks)
86
25. The sketch to the right shows a lamp suspended
from two chains in the corner of a room. The lamp has
a mass of 2.50 kg.
65.
0˚
a) Sketch a free-body diagram of the forces acting on
the lamp. Label the forces. (2 marks)
Chain
B
Chain
A
Lamp
b) Determine the tension forces in chain A and in chain B. (3 marks)
87
APPENDIX M
STUDENT INTERVIEW QUESTIONS
APPENDIX M: STUDENT INTERVIEW QUESTIONS
POST UNIT INTERVENTION STUDENT INTERVIEWS
88
Instructions
The following questions are to be asked of the student subjects after completion of the
unit objectives.
The following statements are to be read to student subjects prior to commencing the
interview:
Participation in this interview is voluntary and you can choose to not answer any question
that you so not want to answer, and you can stop at any time.
Your participation or non-participation will not affect your grade or class standing.
Questions
1. Do you enjoy physics? Why or why not?
2. Do you find physics a difficult subject? Why or why not?
3. Did you enjoy learning the physics concepts of this unit using the computer
simulations? Why or Why not?
4. Can you evaluate the seven simulations we have used this unit. In other words, is
there one or two simulations you thought were better than the others? Provide some
reasons why.
5. Did the simulations help you visualize the ideas and concepts of Newtonian
mechanics? Explain how.
6. Would you use other computer simulations to help you understand and solve physics
concepts and problems outside of class (i.e. when doing homework)? Explain how.
7. What did you like about using the simulations? Explain
8. What did you not like about using the simulations? Explain.
9. Would you like to ‘do’ more physics using the computer simulations? Why or why
not.
10. How did the computer simulations affect your understanding of the physics
concepts? Explain.
11. Anything else you want to tell me regarding the use of computer simulations for
learning physics?